- Add my copyright to files I've touched a lot this year.
- Add dash in front of all copyright notices according to style(9).
- Move $OpenBSD$ down below copyright notices.
- Remove extra line between cdefs.h and __FBSDID.
set.
As the checks don't require vnet context, this is fixed by setting
vnet after the checks.
PR: kern/160541
Submitted by: Nikos Vassiliadis (slightly different approach)
date: 2009/03/31 01:21:29; author: dlg; state: Exp; lines: +9 -16
...
this also firms up some of the input parsing so it handles short frames a
bit better.
This actually fixes reading beyond mbuf data area in pfsync_input(), that
may happen at certain pfsync datagrams.
as r242694):
do better detection of when we have a better version of the tcp sequence
windows than our peer.
this resolves the last of the pfsync traffic storm issues ive been able to
produce, and therefore makes it possible to do usable active-active
statuful firewalls with pf.
id hash. If a state has been disconnected from id hash, its rule pointers
can no longer be dereferenced, and referenced memory can't be modified.
Thus, move rule statistics from pf_free_rule() to pf_unlink_rule() and
update them prior to releasing id hash slot lock.
Reported by: Ian FREISLICH <ianf cloudseed.co.za>
from pfsync:
- Call into pfsync_delete_state() holding the state lock.
- Set the state timeout to PFTM_UNLINKED after state has been moved
to the PFSYNC_S_DEL queue in pfsync.
Reported by: Ian FREISLICH <ianf cloudseed.co.za>
* Global IPFW_DYN_LOCK() is changed to per-bucket mutex.
* State expiration is done in ipfw_tick every second.
* No expiration is done on forwarding path.
* hash table resize is done automatically and does not flush all states.
* Dynamic UMA zone is now allocated per each VNET
* State limiting is now done via UMA(9) api.
Discussed with: ipfw
MFC after: 3 weeks
Sponsored by: Yandex LLC
date: 2009/06/12 02:03:51; author: dlg; state: Exp; lines: +59 -69
rewrite the way states from pfsync are merged into the local state tree
and the conditions on which pfsync will notify its peers on a stale update.
each side (ie, the sending and receiving side) of the state update is
compared separately. any side that is further along than the local state
tree is merged. if any side is further along in the local state table, an
update is sent out telling the peers about it.
case keys had already been freed. If encountering such state, then
just release last reference.
Not sure this can happen as a runtime race, but can be reproduced by
the following scenario:
- enable pfsync
- disable pfsync
- wait some time
- enable pfsync
Instead, add protocol specific mbuf flags M_IP_NEXTHOP and
M_IP6_NEXTHOP. Use them to indicate that the mbuf's chain
contains the PACKET_TAG_IPFORWARD tag. And do a tag lookup
only when this flag is set.
Suggested by: andre
on checksums directly from mbuf flags. This simplifies code.
o Clear CSUM_IP from the mbuf in ip_fragment() if we did checksums in
hardware. Some driver may not announce CSUM_IP in theur if_hwassist,
although try to do checksums if CSUM_IP set on mbuf. Example is em(4).
o While here, consistently use CSUM_IP instead of its alias CSUM_DELAY_IP.
After this change CSUM_DELAY_IP vanishes from the stack.
Submitted by: Sebastian Kuzminsky <seb lineratesystems.com>
on the related functionality in the runtime via the sysctl variable
net.pfil.forward. It is turned off by default.
Sponsored by: Yandex LLC
Discussed with: net@
MFC after: 2 weeks
in network byte order. Any host byte order processing is
done in local variables and host byte order values are
never[1] written to a packet.
After this change a packet processed by the stack isn't
modified at all[2] except for TTL.
After this change a network stack hacker doesn't need to
scratch his head trying to figure out what is the byte order
at the given place in the stack.
[1] One exception still remains. The raw sockets convert host
byte order before pass a packet to an application. Probably
this would remain for ages for compatibility.
[2] The ip_input() still subtructs header len from ip->ip_len,
but this is planned to be fixed soon.
Reviewed by: luigi, Maxim Dounin <mdounin mdounin.ru>
Tested by: ray, Olivier Cochard-Labbe <olivier cochard.me>
now use function calls:
if_clone_simple()
if_clone_advanced()
to initialize a cloner, instead of macros that initialize if_clone
structure.
Discussed with: brooks, bz, 1 year ago
host byte order, was sometimes called with net byte order. Since we are
moving towards net byte order throughout the stack, the function was
converted to expect net byte order, and its consumers fixed appropriately:
- ip_output(), ipfilter(4) not changed, since already call
in_delayed_cksum() with header in net byte order.
- divert(4), ng_nat(4), ipfw_nat(4) now don't need to swap byte order
there and back.
- mrouting code and IPv6 ipsec now need to switch byte order there and
back, but I hope, this is temporary solution.
- In ipsec(4) shifted switch to net byte order prior to in_delayed_cksum().
- pf_route() catches up on r241245 changes to ip_output().
- All packets in NETISR_IP queue are in net byte order.
- ip_input() is entered in net byte order and converts packet
to host byte order right _after_ processing pfil(9) hooks.
- ip_output() is entered in host byte order and converts packet
to net byte order right _before_ processing pfil(9) hooks.
- ip_fragment() accepts and emits packet in net byte order.
- ip_forward(), ip_mloopback() use host byte order (untouched actually).
- ip_fastforward() no longer modifies packet at all (except ip_ttl).
- Swapping of byte order there and back removed from the following modules:
pf(4), ipfw(4), enc(4), if_bridge(4).
- Swapping of byte order added to ipfilter(4), based on __FreeBSD_version
- __FreeBSD_version bumped.
- pfil(9) manual page updated.
Reviewed by: ray, luigi, eri, melifaro
Tested by: glebius (LE), ray (BE)
- Write method of a queue now is void,length of item is taken
as queue property.
- Write methods don't need to know about mbud, supply just buf
to them.
- No need for safe queue iterator in pfsync_sendout().
Obtained from: OpenBSD
pf_purge_expired_states().
Now pf purging daemon stores the current hash table index on stack
in pf_purge_thread(), and supplies it to next iteration of
pf_purge_expired_states(). The latter returns new index back.
The important change is that whenever pf_purge_expired_states() wraps
around the array it returns immediately. This makes our knowledge about
status of states expiry run more consistent. Prior to this change it
could happen that n-th run stopped on i-th entry, and returned (1) as
full run complete, then next (n+1) full run stopped on j-th entry, where
j < i, and that broke the mark-and-sweep algorythm that saves references
rules. A referenced rule was freed, and this later lead to a crash.
we are actually editing table, which means editing rules,
thus we need writer access to 'em.
Fix this by offloading the update of table to the same taskqueue,
we already use for flushing. Since taskqueues major task is now
overloading, and flushing is optional, do mechanical rename
s/flush/overload/ in the code related to the taskqueue.
Since overloading tasks do unsafe referencing of rules, provide
a bandaid in pf_purge_unlinked_rules(). If the latter sees any
queued tasks, then it skips purging for this run.
In table code:
- Assert any lock in pfr_lookup_addr().
- Assert writer lock in pfr_route_kentry().
This is important to secure a small timeframe at boot time, when
network is already configured, but pf(4) is not yet.
PR: kern/171622
Submitted by: Olivier Cochard-LabbИ <olivier cochard.me>
1) Ruleset parser uses a global variable for anchor stack.
2) When processing a wildcard anchor, matching anchors are marked.
To fix the first one:
o Allocate anchor processing stack on stack. To make this allocation
as small as possible, following measures taken:
- Maximum stack size reduced from 64 to 32.
- The struct pf_anchor_stackframe trimmed by one pointer - parent.
We can always obtain the parent via the rule pointer.
- When pf_test_rule() calls pf_get_translation(), the former lends
its stack to the latter, to avoid recursive allocation 32 entries.
The second one appeared more tricky. The code, that marks anchors was
added in OpenBSD rev. 1.516 of pf.c. According to commit log, the idea
is to enable the "quick" keyword on an anchor rule. The feature isn't
documented anywhere. The most obscure part of the 1.516 was that code
examines the "match" mark on a just processed child, which couldn't be
put here by current frame. Since this wasn't documented even in the
commit message and functionality of this is not clear to me, I decided
to drop this examination for now. The rest of 1.516 is redone in a
thread safe manner - the mark isn't put on the anchor itself, but on
current stack frame. To avoid growing stack frame, we utilize LSB
from the rule pointer, relying on kernel malloc(9) returning pointer
aligned addresses.
Discussed with: dhartmei
reside, and move there ipfw(4) and pf(4).
o Move most modified parts of pf out of contrib.
Actual movements:
sys/contrib/pf/net/*.c -> sys/netpfil/pf/
sys/contrib/pf/net/*.h -> sys/net/
contrib/pf/pfctl/*.c -> sbin/pfctl
contrib/pf/pfctl/*.h -> sbin/pfctl
contrib/pf/pfctl/pfctl.8 -> sbin/pfctl
contrib/pf/pfctl/*.4 -> share/man/man4
contrib/pf/pfctl/*.5 -> share/man/man5
sys/netinet/ipfw -> sys/netpfil/ipfw
The arguable movement is pf/net/*.h -> sys/net. There are
future plans to refactor pf includes, so I decided not to
break things twice.
Not modified bits of pf left in contrib: authpf, ftp-proxy,
tftp-proxy, pflogd.
The ipfw(4) movement is planned to be merged to stable/9,
to make head and stable match.
Discussed with: bz, luigi
