and the kernel will have a 'config interface version number'. If an
incompatable change is made to the kernel that requires a rebuild of
config(8) (such as the cam devtab stuff), then the version number would be
bumped in both places. If a user neglects to rebuild config, then they
will get a nagging (but non-fatal) warning that they need to rebuild
config.
it's done for pci. This is so that systat and vmstat can get at the
interrupt counts for the Inter-Processor Interrupts when running a smp
kernel. This doesn't affect the normal kernel, but makes life easier for
the smp people who don't have to track two versions of config.
non-standard and not used. "port auto" is equal to "port?" or missing "port"
keyword now. "port none" is really probe routine task (return -1 for
no ports).
- Use MAP_FAILED instead of the constant -1 to indicate
failure (required by POSIX).
- Removed flag arguments of '0' (required by POSIX).
- Fixed code which expected an error return of 0.
- Fixed code which thought any address with the high bit set
was an error.
- Check for failure where no checks were present.
Discussed with: bde
version of strdup() by a macro, killed many calls to strdup(), thus
potentially wasting less malloc'ed space (their args were never be
free()ed desptie despite of being malloc'ed). Probably still a huge
memory leak at all... Also killed two totally useless variables.
I've tested it as i could, but wouldn't be surprised if unexpected
problems showed up. So watch out this space!
conservative part of the tidyup, like fixing potential buffer overflow
conditions. It is believed to be safe to go into 2.2.
Pointed out by: lozenko@cc.acnit.ac.ru (Evgeny A. Lozenko)
the profiling level in config and decide what to do in makefiles.
Makefile.i386:
Align functions to 16-byte boundaries if profiling is enabled. This
will allow a fourfold reduction in the size of the profiling buffers.
is conditionalized by the INCLUDE_CONFIG_FILE option in your kernel config
file and is not turned on by default.
Submitted-By: Bill Pechter <pechter@shell.monmouth.com>
looking at a high resolution clock for each of the following events:
function call, function return, interrupt entry, interrupt exit,
and interesting branches. The differences between the times of
these events are added at appropriate places in a ordinary histogram
(as if very fast statistical profiling sampled the pc at those
places) so that ordinary gprof can be used to analyze the times.
gmon.h:
Histogram counters need to be 4 bytes for microsecond resolutions.
They will need to be larger for the 586 clock.
The comments were vax-centric and wrong even on vaxes. Does anyone
disagree?
gprof4.c:
The standard gprof should support counters of all integral sizes
and the size of the counter should be in the gmon header. This
hack will do until then. (Use gprof4 -u to examine the results
of non-statistical profiling.)
config/*:
Non-statistical profiling is configured with `config -pp'.
`config -p' still gives ordinary profiling.
kgmon/*:
Non-statistical profiling is enabled with `kgmon -B'. `kgmon -b'
still enables ordinary profiling (and distables non-statistical
profiling) if non-statistical profiling is configured.
Note that this code is dormant unless the options files exist.
Also, parsing of quoted options in the config files is improved.
What this allows, is all the options in LINT to be specified to be
configured as #defines in a file rather than on the CC command line at
kernel build time. This means that 'make depend' will catch dependencies
on actual *options*, meaning that you can run 'config' and 'make depend'
in complete safety WITHOUT removing the compile directory each time.
Unfortunately, this requires a pass over the source to get the individual
files to #include the new .h files that would be generated by config.
This has a small compile time penalty (appears up to about 2% slower)
from a "fresh" build. Of course, you should not be needing to do complete
rebuilds very often once this was completed, so it would be an overall
win for most people.
Since this code is dormant and we've got a lot of other things happening
on the kernel tree at the moment (prototypes, devfs, static declarations
etc) I am not planning on doing any changes to activate this feature just
yet.
Generate prototypes for SCSI functions and function pointers.
Fix redundant declarations of interrupt handlers.
Generate 4.4-style includes (<> instead of "").
Clean up formatting of both the source and the output a bit.
This is performed by using a line similar to:
controller scbus0 at ahc0 bus 1
to wire scbus0 to the second bus on an adaptec 2742T controller.
Reviewed by: Peter Dufault(dufault@hda.com), Rod Grimes(rgrimes@FreeBSD.org)
device table layout...basically, don't output the cruft anymore - it
is now dynamic.
Reviewed by: John Dyson and David Greenman
Submitted by: Poul-Henning Kamp
it really should have been printing all this time. Also fix my rather
bogus handling of the id_conflicts value by moving it to the end of
isa_device and dealing with that correctly now.
others. The flag can be put in descriptive locations, e.g.:
device sb0 at isa? port 0x220 irq 7 conflicts drq 1 vector sbintr
or
device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr
But is nonetheless boolean only. You can't turn conflict checking off for
only a given type of conflict. I didn't deem it worth the trouble at this
stage, and it's far better than the ALLOW_CONFLICT_* that preceeded it.
may not be desired if you're just going to blow the kernel away again later)
and substitute one that tells the user where the new kernel build
directory actually IS, which can at least be argued to be useful information
in all cases.
Reviewed by: davidg
If you invoke config with the `-n' flag or have NO_CONFIG_CLOBBER in
your environment, config will behave the same way it used to. This is
now _documented_ as well. Rip out all the CONFIG_DONT_CLOBBER cruft;
some of it wasn't even correct anyway.
just thinking about it.
Two changes need to be made to allow 'config kernel swap generic' to
work properly without requiring any compile-time flags:
/usr/src/usr.sbin/config/mkswapconf.c: we need to define a dummy stub
for the setconf() function to replace the one in swapgeneric.c that
isn't available in non-generic configurations.
/usr/src/sys/i386/i386/autoconf.c: the -a boot flag causes setroot()
to be skipped and lets setconf() prompt the user for a root device.
If you skip setroot() in a non-generic kernel, you could get severely
hosed. To avoid this, we silently ignore the -a flag if rootdev != NODEV.
(rootdev is always initialized to NODEV in swapgeneric.c, so if
we find that rootdev is something other than NODEV, we know we're
not using a generic configuration.)
Support slice numbers in device names. The syntax is `<driver name>
[<unit number>] ['s' <slice number>] [<partition letter>]'. Only
`['s' <slice number>]' is new here. The slice number defaults to 0
so that there is no change in the output from config if this new
feature is not used.
Replace some magic disk numbers by `dk' slice and label macros.
mkswapconf.c:
Improve the output formatting:
Generate <> style includes.
Print minor numbers in hex so that slice numbers are easy to see and edit.
Print the rootdev and dumpdev names in comments like the swapdev names.
for ioconf.c with the current and suppress the generation if they are
equal. This now prevents all the warnings from the c-compiler about
sio or snd or two adaptecs. This works only if the sio lines are grouped
together in the config files, but it is better than nothing.
/*
* filename [ standard | optional ] [ config-dependent ]
* [ dev* | profiling-routine ] [ device-driver] [ no-obj ]
* [ compile-with "compile rule" [no-implicit-rule] ]
* [ dependancy "dependancy-list"]
*/
I added
no-obj - This entry does not create anything linkable to the kernel.
dependancy - Add additional dependancy rules to a target.
no-implicit-rule - Don't assume .c -> .o type rules. Config is really
dumb in this area and assumes that everything is a .c file
irregarless of extention. This was the best choice really
since there may even be .c file that you don't want to follow
the standard rules.
This was all done so that the building to the aic7770 assembler and using
the aic7770 assembler in the building of the aic7770 driver could be config
dependant. I can now have an entry like this for the driver:
aic7770 optional ahc device-driver \
compile-with "${CC} $> -o $@" \
dependancy "$S/gnu/misc/aic7770/aic7770.c" \
no-obj no-implicit-rule
aic7770_seq.h optional ahc device-driver \
compile-with "${.CURDIR}/aic7770 -o $@ $S/gnu/misc/aic7770/aic7770.seq"\
dependancy "$S/gnu/misc/aic7770/aic7770.seq aic7770" \
no-obj no-implicit-rule
i386/isa/aic7770.c optional ahc device-driver \
dependancy "aic7770_seq.h"
I also added '\' escaping to newlines so that this doesn't look as gross as
it could have.
Reviewed by: jkh
Also initialize some fields that were never initialized before, and
simply defaulted to 0. I've never looked at this code before, now
I know why. Config needs to die. Horribly.
conditional did it backwards, thus flipping the behavior back off
again by default (and only re-enableable through a very counter-intuitive
option setting!). I'm glad I caught this and would merely like to state
again for the record that if you're going to go and modify my changes then
you should at least:
1. Do it correctly, since to do otherwise is kind of a slap in the
face.
2. TELL me.
This is not me just being compulsive, this is simple courtesy.
I'm speaking just of my own preferences here, not necessarily trying
to impose my standards on the group at large (e.g. some other folks might
not even care).
Submitted by: jkh
and recreate any previous ../../compile/<blah> directory before laying
down new files. The depends just aren't smart enough to save
us from the grief that config's old behavior has always caused.
Submitted by: jkh
/usr/src/usr.sbin.config:
o -DSTATCLOCK gives kludges to support the rtc non-device as well as
old kludges to support the clk non-device.
/usr/src/usr.sbin/config.8:
o Document the trivialness of the new vector.h.
/usr/src/usr.sbin/mkglue.c:
o Only print DEVICE_NAMES and NR_DEVICES in vector.h. These are
only required to support vmstat. The vmstat interface will need
to be improved for dynamic loading.
/usr/src/usr.sbin/mkioconf.c:
o Print device ids to be used as indexes into DEVICE_NAMES.
o Print secondary interrupt handler entry points (xxxintr()) instead
of primary ones (VdevU()). Primary ones are now XintrI() and
XfastintrI() and are independent of the config so they are not
handled here.
o Minor cleanups.
Submitted by: Bruce Evans
