on temporary nameserver failure. This is necessary to get
getipnodebyname(3) to correctly return h_errno=TRY_AGAIN instead
of HOST_NOT_FOUND.
Reviewed by: green, thomas
MFC after: 1 week
case where an /etc/nsswitch.conf file was present, but could not
be opened (e.g. due to permissions). Previously, the open failure
condition was suppressed, and the built-in defaults were used. In
revision 1.11, however, propagated the open failure causing all
nsdispatch() invocations to return NS_UNAVAIL, and thus many APIs
including getpwnam and gethostbyname unconditionally failed.
This commit restores the previous behavior.
Pointy hat: nectar (+1 for obstinance; ache had to use clue bat)
Reported by: ache
solved by a simple 'make world'. The signalcontext function was going
to the trouble of generating an even 16 byte alignment, but in fact it
needed to be odd aligned to simulate the 8-byte return address having
been pushed by the caller. This fixes yet another group of crashes in
applications using libpthread. And yet again, it was my fault all along.
While here, rename the duplicate internal ctx_wrapper() functions to
makectx_wrapper() and sigctx_wrapper() so that traces aren't ambiguous.
library, it may pull in that thread library at run time. If the
process started out single-threaded, this could cause attempts to
release locks that do not exist. Guard against this possibility by
checking __isthreaded before invoking thread primitives.
A similar problem remains if the process is linked against one thread
library, but the NSS module is linked against another. This can only
be avoided by careful design of the NSS module.
Submitted by: Sean McNeil <sean@mcneil.com> (mostly; bugs are mine)
ferror(), fileno() and clearerr(), using the value of __isthreaded to
decide between the fast inline single-threaded code and the more
general function equivalent. This gives most of the performance
benefits of the old unsafe macros while preserving thread safety.
structure and call stdio functions. In 5.X this was broken when FILE
locking was introduced into libc.
This change makes most (relevant) stdio functions work again when the
_extra file in FILE isn't initialised (and can't be without a libc
function to do it since the __sFILEX structure is private to libc).
cleanups, handling 'ls -l-', handling '--*'
Note this is in the same time back out of our v1.3
"Don't print an error message if the bad option is '?'"
because it directly violates POSIX.
that this provokes. "Wherever possible" means "In the kernel OR NOT
C++" (implying C).
There are places where (void *) pointers are not valid, such as for
function pointers, but in the special case of (void *)0, agreement
settles on it being OK.
Most of the fixes were NULL where an integer zero was needed; many
of the fixes were NULL where ascii <nul> ('\0') was needed, and a
few were just "other".
Tested on: i386 sparc64
- Fix syntax
- Remove the (slightly wrong) duplicate explanation of the error condition
- Change reference to invalid multibyte character into invalid wide character
The getaddrinfo(3), getipnodebyname(3) and resolver(3) can coincide now
with what should be totally reentrant, and h_errno values will now
be preserved correctly, but this does not affect interfaces such as
gethostbyname(3) which are still mostly non-reentrant.
In all of these relevant functions, the thread-safety has been pushed
down as far as it seems possible right now. This means that operations
that are selected via nsdispatch(3) (i.e. files, yp, dns) are protected
still under global locks that getaddrinfo(3) defines, but where possible
the locking is greatly reduced. The most noticeable improvement is
that multiple DNS lookups can now be run at the same time, and this
shows major improvement in performance of DNS-lookup threaded programs,
and solves the "Mozilla tab serialization" problem.
No single-threaded applications need to be recompiled. Multi-threaded
applications that reference "_res" to change resolver(3) options will
need to be recompiled, and ones which reference "h_errno" will also
if they desire the correct h_errno values. If the applications already
understood that _res and h_errno were not thread-safe and had their own
locking, they will see no performance improvement but will not
actually break in any way.
Please note that when NSS modules are used, or when nsdispatch(3)
defaults to adding any lookups of its own to the individual libc
_nsdispatch() calls, those MUST be reentrant as well.
through a realloc like function.
Make the malloc_active variable a local static to this new function.
Don't warn about recursion more than once per base call.
constify malloc_func.
has been hit, this makes it cover more cases.
Call the message function directly rather than fiddle with flag-saving
when we find an unknown character in our options.
The 'A' flag should not trigger on legal out of memory conditions.
These files had tags after teh copyright notice,
inside the comment block (incorrect, removed),
and outside the comment block (correct).
Approved by: rwatson (mentor)
These files had tags after the copyright notice,
inside the comment block (incorrect, removed),
and outside the comment block (correct).
Approved by: rwatson (mentor)
overridden by the threads library to provide a userland version
of non-pshared semaphores and cancellation points. Also add
a sem_timedwait().
The libc version of semaphores always uses kernel semaphores
regardless of whether pshared is set or not. When threads are
not present, it is difficult to get sem_wait() or sem_timedwait()
to do the right thing (since pthread_cond_timedwait() and
pthread_cond_wait() are stubs in libc and just return immediately).
This results in no functional change, aside from fixing a data
corruption bug on LP64 platforms. The code here could still use a
significant amount of cleanup.
PR: 56502
Submitted by: hrs (earlier version)
- Update and improve the documentation for %[aA]
o Like %[eE], %[aA] may round the result if a precision is specified.
o Grammar police: Fix a split infinitive.
o The FreeBSD implementation does better than the minimum required
by C99 (literal translation of the mantissa). The digit before
the hexadecimal-point is never 0 unless the number itself is 0.
o Clarify that the exponent field represents a decimal exponent of 2.
o Discuss the fact that multiple valid representations are possible.
o Remove the entry in the BUGS section claiming that %[aA] is not
implemented.
- Remove the entry in the BUGS section claiming that the ' flag for
printing thousands separators is unimplemented for floating-point.
- Remove the entry in the BUGS section claiming that the L modifier
reduces the precision to "double" before conversion.
these are not fully implemented and ifdef'd out, the bugs have
never manifested themselves. Specifically:
- Fix a memory leak in the case where %a follows another
floating-point format.
- Make the %a/%A code behave like %e/%E with respect to
precision.
- It is no longer valid to assume that '-' and '0x' are
mutually exclusive.
- Address other minor issues.
For pshared semaphore, this commit still does not enable cancellation
point, I think there should be a pthread_enter_cancellation_point_np
for libc to implement a safe cancellation point.
getpwent(3) or getpwuid(3) when using NIS adjunct maps. The bug was
present in the internal `nis_passwd' function. The lookup in the
adjunct map used the name passed into `nis_passwd', however no name
was of course supplied by getpwent or getpwuid. Correctly use the
name from the `struct pwd' that was found instead.
PR: bin/59962
Submitted by: Gabriel Gomez <ggomez@fing.edu.uy>
in contributed sources with just a hack made possible
by bsd.sys.mk,v 1.33. This is better because it just
nulls out the warning flags rather than adding gcc(1)
specific -w option to CFLAGS.
must first attach to the traced process. If the tracing process
exits without detaching, the traced process will be killed rather
than continued. For the duration of the tracing session, the traced
process is reparented to the tracing process (with resulting expected
behaviors). It is permissible to trace more than one other process
at a time. When using waitpid() to monitor the behavior of the traced
process, signals are intercepted: they may optionally then be
forwarded using ptrace(). Signals are generated normally by and for
the process, but also by the tracing facility (SIGTRAP).
Product of: Suffering
Sponsored by: DARPA, AFRL
at it, use the ANSI C generic pointer type for the second argument,
thus matching the documentation.
Remove the now extraneous (and now conflicting) function declarations
in various libc sources. Remove now unnecessary casts.
Reviewed by: bde
incorrectly when encountering `large' groups (many members and/or many
long member names). The reporter tracked this down to the glibc NSS
module compatibility code (nss_compat.c): it would prematurely record
that a NSS module was finished iterating through its database in some
cases.
Two aspects are corrected:
1. nss_compat.c recorded that a NSS module was finished iterating
whenever the module reported something other than SUCCESS. The
correct logic is to continue iteration when the module reports
either SUCCESS or RETURN. The __nss_compat_getgrent_r and
__nss_compat_getpwent_r routines are updated to reflect this.
2. An internal helper macro __nss_compat_result is used to map glibc
NSS status codes to BSD NSS status codes (e.g. NSS_STATUS_SUCCESS ->
NS_SUCCESS). It provided the obvious mapping.
When a NSS routine is called with a too-small buffer, the
convention in the BSD NSS code is to report RETURN. (This is used
to implement reentrant APIs such as getpwnam_r(3).) However, the
convention in glibc for this case is to set errno = ERANGE and
overload TRYAGAIN. __nss_compat_result is updated to handle this
case.
PR: bin/60287
Reported by: Lachlan O'Dea <odela01@ca.com>
ó++ ABI document at http://www.codesourcery.com/cxx-abi/abi.html#dso-dtor
The ABI was initially defined for ia64, but GCC3 and Intel compilers
have adopted it on other platforms.
This is the patch from PR bin/59552 with a number of changes by
me.
PR: bin/59552
Submitted by: Bradley T Hughes (bhughes at trolltech dot com)
C++ ABI document at http://www.codesourcery.com/cxx-abi/abi.html#dso-dtor
The ABI was initially defined for ia64, but GCC3 and Intel compilers
have adopted it on other platforms.
This is the patch from PR bin/59552 with a number of changes by
me.
PR: bin/59552
Submitted by: Bradley T Hughes (bhughes at trolltech dot com)
Instead of just deleting it, turn the original page into a general
overview of the multibyte character conversion functions, somewhat
similar to stdio(3).
ABI-required stack alignment. C code expects that the push of the
return address disturbed the 16 byte alignment and it will take corrective
measures to fix it before making another call. Of course, if its wrong
to start with, then all hell breaks loose. Essentially we "fix" this
by making the stack alignment odd to start with.
This was one of the things that broke on libkse with apps that use
floating point/varargs/etc.
Approved by: re (scottl)
to sendfile(2) being erroneously automatically restarted after a signal
is delivered. Fixed by converting ERESTART to EINTR prior to exiting.
Updated manual page to indicate the potential EINTR error, its cause
and consequences.
Approved by: re@freebsd.org
initialization overhead, there's a problem in that we never call
imalloc() and thus malloc_init() for zero-sized allocations. As a
result, malloc(0) returns NULL when it's the first or only malloc in
the program. Any non-zero allocation will initialize the malloc code
with the side-effect that subsequent zero-sized allocations return a
non-NULL pointer. This is because the pointer we return for zero-
sized allocations is calculated from malloc_pageshift, which needs
to be initialized at runtime on ia64.
The result of the inconsistent behaviour described above is that
configure scripts failed the test for a GNU compatible malloc. This
resulted in a lot of broken ports.
Other, even simpler, solutions were possible as well:
1. initialize malloc_pageshift with some non-zero value (say 13 for
8KB pages) and keep the runtime adjustment.
2. Stop using malloc_pageshift to calculate ZEROSIZEPTR.
Removal of the runtime adjustment was chosen because then ia64 is the
same as any other platform. It is not to say that using a page size
obtained at runtime is bad per se. It's that there's currently a high
level of gratuity for its existence and the moment it causes problems
is the moment you need to get rid of it. Hence, it's not unthinkable
that this commit is (partially) reverted some time in the future when
we do have a good reason for it and a good way to achieve it.
Approved by: re@ (rwatson)
Reported by: kris (portmgr@) -- may the ports be with you
that they will be installed before application constructors are invoked.
Its possible to link applications such that this fails, application code
is invoked before they are installed, but, well, Don't Do That.
Approved by: re (jhb)
was rejected as a range error, while any values less than LONG_MIN
were silently substituted with LONG_MIN. Furthermore, on some
platforms `time_t' has less range than `long' (e.g. alpha), which may
give incorrect results when parsing some strings.
context of sockets, and document EINVAL as a possible failure mode
based on the object selected, not just the label provided.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
SO_PEERLABEL. This provides an interface to query the label of a
socket peer without embedding implementation details of mac_t in
the application. Previously, sizeof(*mac_t) had to be specified
by an application when performing getsockopt().
Document mac_get_peer(3), and expand documentation of the other
mac_get(3) functions. Note that it's possible to get EINVAL back
from mac_get_fd(3) when pointing it at an inappropriate object.
NOTE: mac_get_fd() and mac_set_fd() support for sockets will
follow shortly, so the documentation is slightly ahead of the
code.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
mac_free(3), which is used only for variables of type mac_t in
the FreeBSD implementation.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
is accessed for the first time as a result of an application looking
up label configuration information. Previously, the check and read
were kicked off by mac_prepare_(typename)() functions; since
mac_prepare_type() may now be directly employed by a user process,
push the check and initialization into that function.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
- In __sigreturn call sigprocmask() to restore our signal state rather than
returning through sigreturn(). jmp to ___sigreturn to restore our register
state following this.
Requested by: pete
string files (__SSTR flag set). This is necessary because __sputc()
does not respect the __SALC flag, and crashes trying to flush the buffer
instead of resizing it.
PR: 59167
sorting strings with common prefixes by noting
when all the strings land in just one bin.
Testing shows significant speedups (on the order of
30%) on strings with common prefixes and no slowdowns on any
of my test cases.
Submitted by: Markus Bjartveit Kruger <markusk@pvv.ntnu.no>
PR: 58860
Approved by: gordon (mentor)
by a parent that is a session leader (e.g., login shell) by ignoring
SIGHUP in before calling fork(2) and then restoring SIGHUP's action
after setsid(3). Based on the patch by Martin Kammerhofer
<mkamm@gmx.net>.
PR: bin/25462
Reviewed by: bde, alex.neyman@auriga.ru
Catch up with renaming of "Japanese" to "ja_JP.eucJP". Comment out the
statement that EUC is provided for compatibility with UNIX-based systems;
this is not a very good opening paragraph.
it around an application's fork() call. Our new thread libraries
(libthr, libpthread) can now have threads running while another
thread calls fork(). In this case, it is possible for malloc
to be left in an inconsistent state in the child. Our thread
libraries, libpthread in particular, need to use malloc internally
after a fork (in the child).
Reviewed by: davidxu
mbstate_t object that they ignore. The zeroing is fairly expensive, and it
will never be necessary in these functions; when we support state-dependent
encodings, we will pass in a pointer to the file's mbstate_t object, and
only zero it at the time the file gets opened.
rather than generating an error. This is consistent with other tools
printing user and group names, and means you can read the ACL using
our tools rather than being up a creek.
PR: 56991
Submitted by: Michael Bretterklieber <mbretter@a-quadrat.at>
mbrtowc() and wcrtomb() directly. GB18030, GBK and UTF2 are left
unconverted; GB18030 will be done eventually, but GBK and UTF2 may just
be removed, as they are subsets of GB18030 and UTF-8 respectively.
as wrappers around the deprecated 4.4BSD rune functions. This paves the
way for state-dependent encodings, which the rune API does not support.
- Add __emulated_sgetrune() and __emulated_sputrune(), which are
implementations of sgetrune() and sputrune() in terms of
mbrtowc() and wcrtomb().
- Rename the old rune-wrapper mbrtowc() and wcrtomb() functions to
__emulated_mbrtowc() and __emulated_wcrtomb().
- Add __mbrtowc and __wcrtomb function pointers, which point to the
current locale's conversion functions, or the __emulated versions.
- Implement mbrtowc() and wcrtomb() as calls to these function pointers.
- Make the "NONE" encoding implement mbrtowc() and wcrtomb() directly.
All of this emulation mess will be removed, together with rune support,
in FreeBSD 6.
when the current implementation won't use it, anyway. Just pass NULL.
This will need to be changed when state-dependent encodings are
supported, but there's no need to take the performance hit
in the meantime.
in KAME implementation, even when no policy is installed
into kernel, getaddrinfo(3) sorts addresses. Since it
causes POLA violation, I modified to don't sort addresses
when no policy is installed into kernel,
Obtained from: KAME
send strhash(3) off to sleep with the fishes. Nothing in our tree uses it.
It has no documentation. It is nonstandard and in spite of the filename
strhash.c and strhash.h, it lives in application namespace by providing
compulsory global symbols hash_create()/hash_destroy()/hash_search()/
hash_traverse()/hash_purge()/hash_stats() regardless of whether you
#include <strhash.h> or not. If it turns out that there is a huge
application for this after all, I can repocopy it somewhere safer and
we can revive it elsewhere. But please, not in libc!
