license, per letter dated July 22, 1999 and irc message from Robert
Watson saying that clause 3 can be removed from those files with an
NAI copyright that also have only a University of California
copyrights.
Approved by: core, rwatson
get the same value from ip->i_ump->um_devvp.
This saves a pointer in the memory copies of inodes, which can
easily run into several hundred kilobytes.
The extra indirection is unmeasurable in benchmarks.
Approved by: mckusick
- Define one flag GB_LOCK_NOWAIT that tells getblk() to pass the LK_NOWAIT
flag to the initial BUF_LOCK(). This will eventually be used in cases
were we want to use a buffer only if it is not currently in use.
- Convert all consumers of the getblk() api to use this extra parameter.
Reviwed by: arch
Not objected to by: mckusick
a full filesystem. Previously, if the allocation failed, we had to
fsync the file before rolling back any partial allocation of indirect
blocks. Most block allocation requests only need to allocate a single
data block and if that allocation fails, there is nothing to unroll.
So, before doing the fsync, we check to see if any rollback will
really be necessary. If none is necessary, then we simply return.
This update eliminates the flurry of disk activity that got triggered
whenever a filesystem would run out of space.
Sponsored by: DARPA & NAI Labs.
of a file in chunks that are less then the filesystem block size, if the
data is not already cached the system will perform a read-before-write.
The problem is that it does this on a block-by-block basis, breaking up the
I/Os and making clustering impossible for the writes. Programs such
as INN using cyclic file buffers suffer greatly. This problem is only going
to get worse as we use larger and larger filesystem block sizes.
The solution is to extend the sequential heuristic so UFS[2] can perform
a far larger read and readahead when dealing with this case.
(note: maximum disk write bandwidth is 27MB/sec thru filesystem)
(note: filesystem blocksize in test is 8K (1K frag))
dd if=/dev/zero of=test.dat bs=1k count=2m conv=notrunc
Before: (note half of these are reads)
tty da0 da1 acd0 cpu
tin tout KB/t tps MB/s KB/t tps MB/s KB/t tps MB/s us ni sy in id
0 76 14.21 598 8.30 0.00 0 0.00 0.00 0 0.00 0 0 7 1 92
0 76 14.09 813 11.19 0.00 0 0.00 0.00 0 0.00 0 0 9 5 86
0 76 14.28 821 11.45 0.00 0 0.00 0.00 0 0.00 0 0 8 1 91
After: (note half of these are reads)
tty da0 da1 acd0 cpu
tin tout KB/t tps MB/s KB/t tps MB/s KB/t tps MB/s us ni sy in id
0 76 63.62 434 26.99 0.00 0 0.00 0.00 0 0.00 0 0 18 1 80
0 76 63.58 424 26.30 0.00 0 0.00 0.00 0 0.00 0 0 17 2 82
0 76 63.82 438 27.32 0.00 0 0.00 0.00 0 0.00 1 0 19 2 79
Reviewed by: mckusick
Approved by: re
X-MFC after: immediately (was heavily tested in -stable for 4 months)
As this code is not actually used by any of the existing
interfaces, it seems unlikely to break anything (famous
last words).
The internal kernel interface to manipulate these attributes
is invoked using two new IO_ flags: IO_NORMAL and IO_EXT.
These flags may be specified in the ioflags word of VOP_READ,
VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that
you want to do I/O to the normal data part of the file and
IO_EXT means that you want to do I/O to the extended attributes
part of the file. IO_NORMAL and IO_EXT are mutually exclusive
for VOP_READ and VOP_WRITE, but may be specified individually
or together in the case of VOP_TRUNCATE. For example, when
removing a file, VOP_TRUNCATE is called with both IO_NORMAL
and IO_EXT set. For backward compatibility, if neither IO_NORMAL
nor IO_EXT is set, then IO_NORMAL is assumed.
Note that the BA_ and IO_ flags have been `merged' so that they
may both be used in the same flags word. This merger is possible
by assigning the IO_ flags to the low sixteen bits and the BA_
flags the high sixteen bits. This works because the high sixteen
bits of the IO_ word is reserved for read-ahead and help with
write clustering so will never be used for flags. This merge
lets us get away from code of the form:
if (ioflags & IO_SYNC)
flags |= BA_SYNC;
For the future, I have considered adding a new field to the
vattr structure, va_extsize. This addition could then be
exported through the stat structure to allow applications to
find out the size of the extended attribute storage and also
would provide a more standard interface for truncating them
(via VOP_SETATTR rather than VOP_TRUNCATE).
I am also contemplating adding a pathconf parameter (for
concreteness, lets call it _PC_MAX_EXTSIZE) which would
let an application determine the maximum size of the extended
atribute storage.
Sponsored by: DARPA & NAI Labs.
filesystem expands the inode to 256 bytes to make space for 64-bit
block pointers. It also adds a file-creation time field, an ability
to use jumbo blocks per inode to allow extent like pointer density,
and space for extended attributes (up to twice the filesystem block
size worth of attributes, e.g., on a 16K filesystem, there is space
for 32K of attributes). UFS2 fully supports and runs existing UFS1
filesystems. New filesystems built using newfs can be built in either
UFS1 or UFS2 format using the -O option. In this commit UFS1 is
the default format, so if you want to build UFS2 format filesystems,
you must specify -O 2. This default will be changed to UFS2 when
UFS2 proves itself to be stable. In this commit the boot code for
reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c)
as there is insufficient space in the boot block. Once the size of the
boot block is increased, this code can be defined.
Things to note: the definition of SBSIZE has changed to SBLOCKSIZE.
The header file <ufs/ufs/dinode.h> must be included before
<ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and
ufs_lbn_t.
Still TODO:
Verify that the first level bootstraps work for all the architectures.
Convert the utility ffsinfo to understand UFS2 and test growfs.
Add support for the extended attribute storage. Update soft updates
to ensure integrity of extended attribute storage. Switch the
current extended attribute interfaces to use the extended attribute
storage. Add the extent like functionality (framework is there,
but is currently never used).
Sponsored by: DARPA & NAI Labs.
Reviewed by: Poul-Henning Kamp <phk@freebsd.org>
been unlinked (e.g., with a zero link count). We have to expunge
all trace of these files from the snapshot so that they are neither
reclaimed prematurely by fsck nor saved unnecessarily by dump.
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
the gating of system calls that cause modifications to the underlying
filesystem. The gating can be enabled by any filesystem that needs
to consistently suspend operations by adding the vop_stdgetwritemount
to their set of vnops. Once gating is enabled, the function
vfs_write_suspend stops all new write operations to a filesystem,
allows any filesystem modifying system calls already in progress
to complete, then sync's the filesystem to disk and returns. The
function vfs_write_resume allows the suspended write operations to
begin again. Gating is not added by default for all filesystems as
for SMP systems it adds two extra locks to such critical kernel
paths as the write system call. Thus, gating should only be added
as needed.
Details on the use and current status of snapshots in FFS can be
found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness
is not included here. Unless and until you create a snapshot file,
these changes should have no effect on your system (famous last words).
<sys/bio.h>.
<sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall
not be made a nested include according to bdes teachings on the
subject of nested includes.
Diskdrivers and similar stuff below specfs::strategy() should no
longer need to include <sys/buf.> unless they need caching of data.
Still a few bogus uses of struct buf to track down.
Repocopy by: peter
filesystem fills up. If the first indirect block exists and FFS is able
to allocate deeper indirect blocks, but is not able to allocate the
data block, FFS improperly unwinds the indirect blocks and leaves a
block pointer hanging to a freed block. This will cause a panic later
when the file is removed. The solution is to properly account for the
first block-pointer-to-an-indirect-block we had to create in a balloc
operation and then unwind it if a failure occurs.
Detective work by: Ian Dowse <iedowse@maths.tcd.ie>
Reviewed by: mckusick, Ian Dowse <iedowse@maths.tcd.ie>
Approved by: jkh
The problem occurs when an indirect block and a data block are
being allocated at the same time. For example when the 13th block
of the file is written, the filesystem needs to allocate the first
indirect block and a data block. If the indirect block allocation
succeeds, but the data block allocation fails, the error code
dellocates the indirect block as it has nothing at which to point.
Unfortunately, it does not deallocate the indirect block's associated
dependencies which then fail when they find the block unexpectedly
gone (ptr == 0 instead of its expected value). The fix is to fsync
the file before doing the block rollback, as the fsync will flush
out all of the dependencies. Once the rollback is done the file
must be fsync'ed again so that the soft updates code does not find
unexpected changes. This approach is much slower than writing the
code to back out the extraneous dependencies, but running out of
disk space is not expected to be a common occurence, so just getting
it right is the main criterion.
PR: kern/15063
Submitted by: Assar Westerlund <assar@stacken.kth.se>
been set for a mount point. Insert missing checks to ensure that all
write operations are done asynchronously when the MNT_ASYNC option
has been requested.
Submitted by: Craig A Soules <soules+@andrew.cmu.edu>
Reviewed by: Kirk McKusick <mckusick@mckusick.com>
original BSD code. The association between the vnode and the vm_object
no longer includes reference counts. The major difference is that
vm_object's are no longer freed gratuitiously from the vnode, and so
once an object is created for the vnode, it will last as long as the
vnode does.
When a vnode object reference count is incremented, then the underlying
vnode reference count is incremented also. The two "objects" are now
more intimately related, and so the interactions are now much less
complex.
When vnodes are now normally placed onto the free queue with an object still
attached. The rundown of the object happens at vnode rundown time, and
happens with exactly the same filesystem semantics of the original VFS
code. There is absolutely no need for vnode_pager_uncache and other
travesties like that anymore.
A side-effect of these changes is that SMP locking should be much simpler,
the I/O copyin/copyout optimizations work, NFS should be more ponderable,
and further work on layered filesystems should be less frustrating, because
of the totally coherent management of the vnode objects and vnodes.
Please be careful with your system while running this code, but I would
greatly appreciate feedback as soon a reasonably possible.
changes, so don't expect to be able to run the kernel as-is (very well)
without the appropriate Lite/2 userland changes.
The system boots and can mount UFS filesystems.
Untested: ext2fs, msdosfs, NFS
Known problems: Incorrect Berkeley ID strings in some files.
Mount_std mounts will not work until the getfsent
library routine is changed.
Reviewed by: various people
Submitted by: Jeffery Hsu <hsu@freebsd.org>
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
Speed up for vfs_bio -- addition of a routine bqrelse to greatly diminish
overhead for merged cache.
Efficiency improvement for vfs_cluster. It used to do alot of redundant
calls to cluster_rbuild.
Correct the ordering for vrele of .text and release of credentials.
Use the selective tlb update for 486/586/P6.
Numerous fixes to the size of objects allocated for files. Additionally,
fixes in the various pagers.
Fixes for proper positioning of vnode_pager_setsize in msdosfs and ext2fs.
Fixes in the swap pager for exhausted resources. The pageout code
will not as readily thrash.
Change the page queue flags (PG_ACTIVE, PG_INACTIVE, PG_FREE, PG_CACHE) into
page queue indices (PQ_ACTIVE, PQ_INACTIVE, PQ_FREE, PQ_CACHE),
thereby improving efficiency of several routines.
Eliminate even more unnecessary vm_page_protect operations.
Significantly speed up process forks.
Make vm_object_page_clean more efficient, thereby eliminating the pause
that happens every 30seconds.
Make sequential clustered writes B_ASYNC instead of B_DELWRI even in the
case of filesystems mounted async.
Fix a panic with busy pages when write clustering is done for non-VMIO
buffers.
Fixed remaining known bugs in the buffer IO and VM system.
vfs_bio.c:
Fixed some race conditions and locking bugs. Improved performance
by removing some (now) unnecessary code and fixing some broken
logic.
Fixed process accounting of # of FS outputs.
Properly handle NFS interrupts (B_EINTR).
(various)
Replaced calls to clrbuf() with calls to an optimized routine
called vfs_bio_clrbuf().
(various FS sync)
Sync out modified vnode_pager backed pages.
ffs_vnops.c:
Do two passes: Sync out file data first, then indirect blocks.
vm_fault.c:
Fixed deadly embrace caused by acquiring locks in the wrong order.
vnode_pager.c:
Changed to use buffer I/O system for writing out modified pages. This
should fix the problem with the modification date previous not getting
updated. Also dramatically simplifies the code. Note that this is
going to change in the future and be implemented via VOP_PUTPAGES().
vm_object.c:
Fixed a pile of bugs related to cleaning (vnode) objects. The performance
of vm_object_page_clean() is terrible when dealing with huge objects,
but this will change when we implement a binary tree to keep the object
pages sorted.
vm_pageout.c:
Fixed broken clustering of pageouts. Fixed race conditions and other
lockup style bugs in the scanning of pages. Improved performance.
