fully initialed when the pmap layer tries to call sched_pini() early in the
boot and results in an quick panic. Use ke_pinned instead as was originally
done with Tor's patch.
Approved by: julian
scheduler specific extension to it. Put it in the extension as
the implimentation details of how the pinning is done needn't be visible
outside the scheduler.
Submitted by: tegge (of course!) (with changes)
MFC after: 3 days
but with slightly cleaned up interfaces.
The KSE structure has become the same as the "per thread scheduler
private data" structure. In order to not make the diffs too great
one is #defined as the other at this time.
The KSE (or td_sched) structure is now allocated per thread and has no
allocation code of its own.
Concurrency for a KSEGRP is now kept track of via a simple pair of counters
rather than using KSE structures as tokens.
Since the KSE structure is different in each scheduler, kern_switch.c
is now included at the end of each scheduler. Nothing outside the
scheduler knows the contents of the KSE (aka td_sched) structure.
The fields in the ksegrp structure that are to do with the scheduler's
queueing mechanisms are now moved to the kg_sched structure.
(per ksegrp scheduler private data structure). In other words how the
scheduler queues and keeps track of threads is no-one's business except
the scheduler's. This should allow people to write experimental
schedulers with completely different internal structuring.
A scheduler call sched_set_concurrency(kg, N) has been added that
notifies teh scheduler that no more than N threads from that ksegrp
should be allowed to be on concurrently scheduled. This is also
used to enforce 'fainess' at this time so that a ksegrp with
10000 threads can not swamp a the run queue and force out a process
with 1 thread, since the current code will not set the concurrency above
NCPU, and both schedulers will not allow more than that many
onto the system run queue at a time. Each scheduler should eventualy develop
their own methods to do this now that they are effectively separated.
Rejig libthr's kernel interface to follow the same code paths as
linkse for scope system threads. This has slightly hurt libthr's performance
but I will work to recover as much of it as I can.
Thread exit code has been cleaned up greatly.
exit and exec code now transitions a process back to
'standard non-threaded mode' before taking the next step.
Reviewed by: scottl, peter
MFC after: 1 week
FULL_PREEMPTION is defined. Add a runtime warning to ULE if PREEMPTION is
enabled (code inspired by the PREEMPTION warning in kern_switch.c). This
is a possible MT5 candidate.
preemption and/or the rev 1.79 kern_switch.c change that was backed out.
The thread was being assigned to a runq without adding in the load, which
would cause the counter to hit -1.
migration. Use this in sched_prio() and sched_switch() to stop us from
migrating threads that are in short term sleeps or are runnable. These
extra migrations were added in the patches to support KSE.
- Only set NEEDRESCHED if the thread we're adding in sched_add() is a
lower priority and is being placed on the current queue.
- Fix some minor whitespace problems.
contributed to the transferable load count. This prevents any potential
problems with sched_pin() being used around calls to setrunqueue().
- Change the sched_add() load balancing algorithm to try to migrate on
wakeup. This attempts to place threads that communicate with each other
on the same CPU.
- Don't clear the idle counts in kseq_transfer(), let the cpus do that when
they call sched_add() from kseq_assign().
- Correct a few out of date comments.
- Make sure the ke_cpu field is correct when we preempt.
- Call kseq_assign() from sched_clock() to catch any assignments that were
done without IPI. Presently all assignments are done with an IPI, but I'm
trying a patch that limits that.
- Don't migrate a thread if it is still runnable in sched_add(). Previously,
this could only happen for KSE threads, but due to changes to
sched_switch() all threads went through this path.
- Remove some code that was added with preemption but is not necessary.
specify "us" as the thread not the process/ksegrp/kse.
You can always find the others from the thread but the converse is not true.
Theorotically this would lead to runtime being allocated to the wrong
entity in some cases though it is not clear how often this actually happenned.
(would only affect threaded processes and would probably be pretty benign,
but it WAS a bug..)
Reviewed by: peter
since they are only accessed by curthread and thus do not need any
locking.
- Move pr_addr and pr_ticks out of struct uprof (which is per-process)
and directly into struct thread as td_profil_addr and td_profil_ticks
as these variables are really per-thread. (They are used to defer an
addupc_intr() that was too "hard" until ast()).
takes an argument to specify if it should preempt or not. Don't preempt
when sched_add_internal() is called from kseq_idled() or kseq_assign()
as in those cases we are about to call mi_switch() anyways. Also, doing
so during the first context switch on an AP leads to a NULL pointer deref
because curthread is NULL.
- Reenable preemption for ULE.
Submitted by: Taku YAMAMOTO taku at tackymt.homeip.net
hangs due to recent preemption changes. This change appears to remove
the panic that I was running into, but at the cost of increasing
ithread scheduling latency, and as such is a temporary band-aid until
jhb has a chance to resolve the ule<->preemption interaction that is
the source of the problem. If it doesn't fix the problem for others--
sorry!
introduced a KSE_CAN_MIGRATE() invocation with one argument
missing (class). Either this is a genuine forget or it crept
in from JHB's repo where he may have modified it. If it's
the latter then it may require more attention. For now fix
the make depend.
than as one-off hacks in various other parts of the kernel:
- Add a function maybe_preempt() that is called from sched_add() to
determine if a thread about to be added to a run queue should be
preempted to directly. If it is not safe to preempt or if the new
thread does not have a high enough priority, then the function returns
false and sched_add() adds the thread to the run queue. If the thread
should be preempted to but the current thread is in a nested critical
section, then the flag TDF_OWEPREEMPT is set and the thread is added
to the run queue. Otherwise, mi_switch() is called immediately and the
thread is never added to the run queue since it is switch to directly.
When exiting an outermost critical section, if TDF_OWEPREEMPT is set,
then clear it and call mi_switch() to perform the deferred preemption.
- Remove explicit preemption from ithread_schedule() as calling
setrunqueue() now does all the correct work. This also removes the
do_switch argument from ithread_schedule().
- Do not use the manual preemption code in mtx_unlock if the architecture
supports native preemption.
- Don't call mi_switch() in a loop during shutdown to give ithreads a
chance to run if the architecture supports native preemption since
the ithreads will just preempt DELAY().
- Don't call mi_switch() from the page zeroing idle thread for
architectures that support native preemption as it is unnecessary.
- Native preemption is enabled on the same archs that supported ithread
preemption, namely alpha, i386, and amd64.
This change should largely be a NOP for the default case as committed
except that we will do fewer context switches in a few cases and will
avoid the run queues completely when preempting.
Approved by: scottl (with his re@ hat)
switch to. If a non-NULL thread pointer is passed in, then the CPU will
switch to that thread directly rather than calling choosethread() to pick
a thread to choose to.
- Make sched_switch() aware of idle threads and know to do
TD_SET_CAN_RUN() instead of sticking them on the run queue rather than
requiring all callers of mi_switch() to know to do this if they can be
called from an idlethread.
- Move constants for arguments to mi_switch() and thread_single() out of
the middle of the function prototypes and up above into their own
section.
sched_clock() rather than using callouts. This means we no longer have to
take the load of the callout thread into consideration while balancing and
should make the balancing decisions simpler and more accurate.
Tested on: x86/UP, amd64/SMP
sched_ule, in January 2004. Looking at this, "pagezero" is (one of) the
culprit(s). We had no provision for processes with P_NOLOAD set. With
pagezero not running at PRI_ITHD, kseq_load_{add,rem} count pagezero as
another-normal-process, thus the "expected-plus-one" load reported in
the above thread.
Submitted by: Nikos Ntarmos <ntarmos@ceid.upatras.gr>
SCHED_INTERACT_MAX was used where SCHED_SLP_RUN_MAX was needed. This was
causing the interactivity scaler to lose history at a more dramatic rate
than intended.
long as there are still explicit uses of int, whether in types or
in function names (such as atomic_set_int() in sched_ule.c), we can
not change cpumask_t to be anything other than u_int. See also the
commit log for sys/sys/types.h, revision 1.84.
activation (i.e., applications are using libpthread). This is because
SCHED_ULE sometimes puts P_SA processes into ksq_next unnecessarily.
Which doesn't give fair amount of CPU time to processes which are
using scheduler-activation-based threads when other (semi-)CPU-intensive,
non-P_SA processes are running.
Further work will no doubt be done by jeffr at a later date.
Submitted by: Taku YAMAMOTO <taku@cent.saitama-u.ac.jp>
Reviewed by: rwatson, freebsd-current@
sleep queue interface:
- Sleep queues attempt to merge some of the benefits of both sleep queues
and condition variables. Having sleep qeueus in a hash table avoids
having to allocate a queue head for each wait channel. Thus, struct cv
has shrunk down to just a single char * pointer now. However, the
hash table does not hold threads directly, but queue heads. This means
that once you have located a queue in the hash bucket, you no longer have
to walk the rest of the hash chain looking for threads. Instead, you have
a list of all the threads sleeping on that wait channel.
- Outside of the sleepq code and the sleep/cv code the kernel no longer
differentiates between cv's and sleep/wakeup. For example, calls to
abortsleep() and cv_abort() are replaced with a call to sleepq_abort().
Thus, the TDF_CVWAITQ flag is removed. Also, calls to unsleep() and
cv_waitq_remove() have been replaced with calls to sleepq_remove().
- The sched_sleep() function no longer accepts a priority argument as
sleep's no longer inherently bump the priority. Instead, this is soley
a propery of msleep() which explicitly calls sched_prio() before
blocking.
- The TDF_ONSLEEPQ flag has been dropped as it was never used. The
associated TDF_SET_ONSLEEPQ and TDF_CLR_ON_SLEEPQ macros have also been
dropped and replaced with a single explicit clearing of td_wchan.
TD_SET_ONSLEEPQ() would really have only made sense if it had taken
the wait channel and message as arguments anyway. Now that that only
happens in one place, a macro would be overkill.
track the load for the sched_load() function. In the SMP case this member
is not defined because it would be redundant with the ksg_load member
which already tracks the non ithd load.
- For sched_load() in the UP case simply return ksq_sysload. In the SMP
case traverse the list of kseq groups and sum up their ksg_load fields.
SW_INVOL. Assert that one of these is set in mi_switch() and propery
adjust the rusage statistics. This is to simplify the large number of
users of this interface which were previously all required to adjust the
proper counter prior to calling mi_switch(). This also facilitates more
switch and locking optimizations.
- Change all callers of mi_switch() to pass the appropriate paramter and
remove direct references to the process statistics.
cpu could have been bogged down with non-transferable load and still not
migrated a new thread to an idle cpu. This required some benchmarking and
tuning to get right as the comment above it suggests.
- In sched_add(), do the idle check prior to the transfer check so that we
don't try to transfer load from an idle cpu. This fixes panics caused by
IPIs on UP machines running SMP kernels.
Reported/Debugged by: seanc
- The new sched_balance_groups() function does intra-group balancing while
sched_balance() balances the available groups.
- Pick a random time between 0 ticks and hz * 2 ticks to restart each
balancing process. Each balancer has its own timeout.
- Pick a random place in the list of groups to start the search for lowest
and highest group loads. This prevents us from prefering a group based on
numeric position.
- Use a nasty hack to stop us from preferring cpu 0. The problem is that
softclock always runs on cpu 0, so it always has a little extra load. We
ignore this load in the balancer for now. In the future softclock should
run on a random cpu and these hacks can go away.
cpu are added to a group.
- Don't place a cpu into the kseq_idle bitmask until all cpus in that group
have idled.
- Prefer idle groups over idle group members in the new kseq_transfer()
function. In this way we will prefer to balance load across full cores
rather than add further load a partial core.
- Before a cpu goes idle, check the other group members for threads. Since
SMT cpus may freely share threads, this is cheap.
- SMT cores may be individually pinned and bound to now. This contrasts the
old mechanism where binding or pinning would have allowed a thread to run
on any available cpu.
- Remove some unnecessary logic from sched_switch(). Priority propagation
should be properly taken care of in sched_prio() now.
Be sure to shift (long)1 << 33 and higher, not (int)1. Otherwise bad
things happen(TM). This is why beast.freebsd.org paniced with ULE.
Reviewed by: jeff
1) mp_maxid is a valid FreeBSD CPU ID in the range 0 .. MAXCPU - 1.
2) For all active CPUs in the system, PCPU_GET(cpuid) <= mp_maxid.
Approved by: re (scottl)
Tested on: i386, amd64, alpha
kses from the run queues. Also, on SMP, we track the transferable
count here. Threads are transferable only as long as they are on the
run queue.
- Previously, we adjusted our load balancing based on the transferable count
minus the number of actual cpus. This was done to account for the threads
which were likely to be running. All of this logic is simpler now that
transferable accounts for only those threads which can actually be taken.
Updated various places in sched_add() and kseq_balance() to account for
this.
- Rename kseq_{add,rem} to kseq_load_{add,rem} to reflect what they're
really doing. The load is accounted for seperately from the runq because
the load is accounted for even as the thread is running.
- Fix a bug in sched_class() where we weren't properly using the PRI_BASE()
version of the kg_pri_class.
- Add a large comment that describes the impact of a seemingly simple
conditional in sched_add().
- Also in sched_add() check the transferable count and KSE_CAN_MIGRATE()
prior to checking kseq_idle. This reduces the frequency of access for
kseq_idle which is a shared resource.
