1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-16 10:20:30 +00:00
Commit Graph

829 Commits

Author SHA1 Message Date
Steve Price
3a67b4e914 Add vpo.4 to the list of manpages to build and install.
PR:		9427
Submitted by:	Jeroen Ruigrok/Asmodai <asmodai@wxs.nl>
1999-01-10 19:26:27 +00:00
Nicolas Souchu
bc35c17446 Major ppbus commit with:
+ ECP parallel port chipset FIFO detection
	+ DMA+FIFO parallel I/O handled as chipset specific
	+ nlpt updated in order to use the above enhanced parallel I/O.
	  Use 'lptcontrol -e' to use enhanced I/O
	+ Various options documented in LINT
	+ Full IEEE1284 NIBBLE and BYTE modes support. See ppbus(4) for
	  an overview of the IEEE1284 standard
	+ Detection of PnP parallel devices at boot
	+ Read capability added to nlpt driver to get IEEE1284 compliant
	  printer status with a simple 'cat /dev/lpt0'
	+ IEEE1284 peripheral emulation added to BYTE mode. Two computers
	  may dialog according to IEEE1284 signaling method.
	  See PERIPH_1284 option and /sys/dev/ppbus/ppi.c

All this code is supposed to provide basic functions for IEEE1284 programming.
ppi.c and nlpt.c may act as examples.
1999-01-10 12:04:56 +00:00
Daniel O'Callaghan
16f81b74ae Fix typo: if_name -> ifr_name
Submitted by:	Casper <casper@acc.am>
1999-01-10 04:59:59 +00:00
Bill Paul
31188d61c1 Add driver support (and man page) for PCI fast ethernet cards based
on the ASIX AX88140A chip. Update /sys/conf/files, RELNOTES.TXT,
/sys/i388/i386/userconfig.c, sysinstall/devices.c, GENERIC and LINT
accordingly.

For now, the only board that I know of that uses this chip is the
Alfa Inc. GFC2204. (Its predecessor, the GFC2202, was a DEC tulip card.)
Thanks again to Ulf for obtaining the board for me. If anyone runs
across another, please feel free to update the man page and/or the
release notes. (The same applies for the other drivers.)

FreeBSD should now have support for all of the DEC tulip workalike
chipsets currently on the market (Macronix, Lite-On, Winbond, ASIX).
And unless I'm mistaken, it should also have support for all PCI fast
ethernet chipsets in general (except maybe the SMC FEAST chip, which
nobody seems to ever use, including SMC). Now if only we could convince
3Com, Intel or whoever to cough up some documentation for gigabit
ethernet hardware.

Also updated RELNOTEX.TXT to mention that the SVEC PN102TX is supported
by the Macronix driver (assuming you actually have an SVEC PN102TX with
a Macronix chip on it; I tried to order a PN102TX once and got a box
labeled 'Hawking Technology PN102TX' that had a VIA Rhine board inside
it).
1999-01-09 18:12:08 +00:00
David E. O'Brien
bc6b8d1239 Add MLINKS for devstat kernel interfaces. 1999-01-09 05:09:21 +00:00
Peter Wemm
77ca8b20d8 restore pcvt(4) man page
Reviewed by:	 core
1999-01-01 08:48:31 +00:00
Tim Vanderhoek
3fea87d29e -make clear need to use the upgrade kit
-add "depends" to list of recursive targets
-consistent capitilization of FreeBSD.ORG
-remove description of PATCH_DEBUG
-add .Xr to portcheckout(1) and pib(1)
1998-12-30 17:32:47 +00:00
Poul-Henning Kamp
fc47545ec3 Pre 3.0 branch cleanup casualty #6: ft 1998-12-27 13:40:57 +00:00
Poul-Henning Kamp
11ceeec231 Pre 3.0 branch cleanup casualty #5: nca, sea, wds, uha
No CAM drivers available.  If somebody CAMifies one of these, they
will be welcome back in the tree
1998-12-27 13:06:44 +00:00
Poul-Henning Kamp
9034de81c2 Pre 3.0 branch cleanup casualty #4: pcvt 1998-12-27 12:52:46 +00:00
Poul-Henning Kamp
e86310b905 Pre 3.0 branch cleanup casualty #3: 3c505 ethernet support 1998-12-27 12:44:57 +00:00
Greg Lehey
c7c4322f91 - Clarify the manner in which mirroring is performed
- Get the (tm) signal correct in nroff versions
- Correct highlighting (docs/9196)

Sigh.  This is still a long way from being correct.  In particular,
the states are both incorrect, and they don't format properly in
troff.  But it will have to wait until I stop changing the meanings of
the states.
1998-12-27 02:55:28 +00:00
Matthew Dillon
3128fa34a9 Fix copyright info. Man page was written by Matt, not CSRG :-) 1998-12-26 05:19:42 +00:00
David E. O'Brien
6ac7e896c3 Hack -> compromise
hacker -> intruder (couldn't desired between this and 'cracker')
config -> configuration
sorted crossreferences
spell checked

Overall very good content, but we need one of our wordsmiths to change the
tone to match the CSRG manpages.
1998-12-25 23:39:01 +00:00
Bill Paul
6a5359cac2 Correct the name of the SMC 1211-TX: it's called the EZ Card 10/100 PCI,
not EtherEZ.
1998-12-24 18:52:47 +00:00
Matthew Dillon
557d5a1caa M_AWAIT changed to M_ASLEEP 1998-12-23 01:06:57 +00:00
Matthew Dillon
367f1374e1 Documentation update for new M_AWAIT flag to kernel malloc, plus revamp
the descriptions of the flags and return value.
1998-12-23 01:05:06 +00:00
Matthew Dillon
1ddb20703d update asleep/await sections 1998-12-23 00:24:59 +00:00
Matthew Dillon
88b85f7467 Add manual page describing kernel buffer management system (i.e.
kern/vfs_bio.c).
1998-12-22 19:47:48 +00:00
Matthew Dillon
7626ae52a5 Grammer / Consistancy update
Submitted by:	Eivind Eklund <eivind@yes.no>
1998-12-22 19:02:51 +00:00
Joerg Wunsch
cd40239fe3 For whatever reason, i've thrown away this change yesterday instead of
committing it: include rdp.4.

Pointed out by:	bde
1998-12-22 09:36:29 +00:00
Luigi Rizzo
2296e7a82a Add manpages for dummynet and bridging 1998-12-21 22:37:53 +00:00
Joerg Wunsch
8194a57215 This is my first cut on a driver for the RealTek RTL 8002 pocket
ethernet driver.

The BUGS section is still impressive, but the driver seems to work for
me now.  Disclaimer: i haven't been able to test this under -current
so far (but it compiles, and the notebook it's intended for can now be
updated to -current more easy than before).  Don't be afraid of the
many #ifdefs on __FreeBSD_version in the imported file; i want them in
the repository on the vendor-branch so other people can also manually
integrate it into older systems.  I'll clean it up on the -current
branch in a followup commit.  The vendor-banch version right now
supports systems back to 2.2R.

This driver should be layered upon ppc(4), but i currently have no
idea how to do this.

Eventually i'll further develop the driver to also support the more
modern RTL 8012 success, which seems to be present in a number of
cheap pocket ethernet adapters these days.  Right now, i doubt it will
run with the 8012 without any changes.

Finally a big Thanks! to RealTek for promptly providing me with
documentation and with the source code for the 8012 pocket driver upon
request.  I wish all vendors were that cooperative!.
1998-12-21 18:01:15 +00:00
Matthew Dillon
4f32889f72 update HISTORY section 1998-12-21 10:34:53 +00:00
Matthew Dillon
f44bc94d97 Add manual page for experimental kernel asleep() and await() routines 1998-12-21 10:29:28 +00:00
Joseph Koshy
82315fb071 Clarify that "/usr/share" is used for architecture independent files
and need not be restricted to ASCII text files.

PR:		docs/9124
Submitted by:	Mattias Pantzare <pantzer@ludd.luth.se>
1998-12-21 05:57:57 +00:00
Matthew Dillon
f063d76ae3 Moved security page from man 1 to man 7 1998-12-20 20:12:17 +00:00
Matthew Dillon
1641c009a5 Moving security page to section 7 1998-12-20 20:11:25 +00:00
Matthew Dillon
846eedde28 Add quick overview of basic firewalling practices 1998-12-20 20:05:44 +00:00
Matthew Dillon
dc36fd0f8e Add information on how to deal with DOS attacks 1998-12-20 19:49:43 +00:00
Bruce Evans
6a157c8648 FIxed unsorting of cross references in previous commit. 1998-12-20 06:30:05 +00:00
Bruce Evans
b9f010b051 Fixed unsorting of MAN1 in previous commit. 1998-12-20 06:27:00 +00:00
Matthew Dillon
2eaf205864 Commit initial man page for 'security'... an introduction to security
mechanisms.  It is a little light on detail but still a pretty good
    overview.  I suggest that for specific detail (such as, for example,
    how to setup kerberos), that additional security-DETAILNAME man pages
    be written and refered to.
1998-12-19 09:33:03 +00:00
Joseph Koshy
c228bdde6f Fix spelling nits.
PR:		docs/9115
Submitted by:	Kris Kennaway <kkennawa@physics.adelaide.edu.au>
1998-12-18 03:08:57 +00:00
Matthew Dillon
ab327a8284 Reviewed by: freebsd-current
Update manual pages for rc(8) and rc.conf(5) based on recent changes
    to rc.local and rc.conf[.local].
1998-12-12 23:26:53 +00:00
Matthew Dillon
f633e4c98b Clarify rc's handling of rc.local 1998-12-12 23:08:34 +00:00
Bill Paul
f769cca5eb Un-revert typo fix (fauled -> failed). This is what I get for not
keeping my local RCS files in sync with the rest of the world.

Caught red-handed by: bde
1998-12-07 18:14:30 +00:00
Bill Paul
989c9647f2 if_rl.c: make a small tweak to properly handle the Accton MPX 5030/5038
as a RealTek 8139
if_rlreg.h: use bus_space_read_X() in CSR_READ_X() macros instead of
            directly calling inb()/outb() etc...
rl.4 + RELNOTES.TXT: mention that SMC EtherEZ PCI 1211-TX is supported
                     by the RealTek driver
1998-12-07 00:35:06 +00:00
Robert Nordier
a4dddbe01e Fix typos (dexktop, ot) 1998-12-05 09:36:15 +00:00
Robert Nordier
d3c1cd6fe7 Fix typo (fauled) 1998-12-05 09:31:25 +00:00
Bill Paul
726ff6a158 An early Christmas present: add driver support for a whole bunch of
PCI fast ethernet adapters, plus man pages.

if_pn.c: Netgear FA310TX model D1, LinkSys LNE100TX, Matrox FastNIC 10/100,
         various other PNIC devices

if_mx.c: NDC Communications SOHOware SFA100 (Macronix 98713A), various
         other boards based on the Macronix 98713, 98713A, 98715, 98715A
         and 98725 chips

if_vr.c: D-Link DFE530-TX, other boards based on the VIA Rhine and
         Rhine II chips (note: the D-Link and certain other cards
         that actually use a Rhine II chip still return the PCI
         device ID of the Rhine I. I don't know why, and it doesn't
         really matter since the driver treats both chips the same
         anyway.)

if_wb.c: Trendware TE100-PCIE and various other cards based on the
         Winbond W89C840F chip (the Trendware card is identical to
         the sample boards Winbond sent me, so who knows how many
         clones there are running around)

All drivers include support for ifmedia, BPF and hardware multicast
filtering.

Also updated GENERIC, LINT, RELNOTES.TXT, userconfig and
sysinstall device list.

I also have a driver for the ASIX AX88140A in the works.
1998-12-04 18:01:24 +00:00
Joseph Koshy
9a963d0aac Fix typo ('strait' -> 'straight').
PR:		docs/8956
Submitted by:	Kaneda Hiloshi <vanitas@ma3.seikyou.ne.jp>
1998-12-04 00:51:17 +00:00
Joseph Koshy
8c5b93b9d2 Fix bugs in mdoc.samples(7): clean up references, quote usage of macros,
correct typos.

PR:		docs/9942
Submitted by:	vanitas@ma3.seikyou.ne.jp
Reviewed by:	jkoshy
1998-12-03 03:38:45 +00:00
Bill Fumerola
6ee42d6d78 slstats(8) --> slstat(8)
PR:		docs/8107
Submitted by:	Matthew Fuller <fullermd@futuresouth.com>
1998-12-02 23:29:25 +00:00
Bill Fumerola
f41840a6fc Macro "Re" stands for "Reference End", not "Reference Start"
PR:		docs/8727
Reviewed by:	jdp
Submitted by:	Kazuo Horikawa <horikawa@jp.FreeBSD.org>
1998-12-01 19:58:58 +00:00
Bill Fumerola
f7dd6882ec Formatting bug. What should have been "Veritas(tm)" was coming out
"Veritastm".

PR:		docs/8733
Submitted by:	Stefan Eggers <seggers@semyam.dinoco.de>
1998-11-30 21:38:06 +00:00
Robert Nordier
93a4ebf345 Refer to "da" rather than "sd" device. 1998-11-30 17:52:45 +00:00
Joseph Koshy
c0226436b4 Add a manual page for man(7).
Thanks-to:	Joerg Wunsch for sending me a sample page for inspiration.
1998-11-26 00:21:24 +00:00
Bill Paul
bb2ce8f34e Mention in the man page that the Accton 1207D adapter is supported. 1998-11-18 21:05:11 +00:00
Mike Smith
3acd0a4cb3 Document the new nfs_access_cache variable. 1998-11-15 20:29:27 +00:00