uncommitted):
Rename ip_claim_next_hop() to m_claim_next_hop(), give it an extra arg
(the type of tag to claim) and push it out of ip_var.h into mbuf.h
alongside all of the other macros that work ok mbuf's and tag's.
possible while maintaining compatibility with the widest range of TCP stacks.
The algorithm is as follows:
---
For connections in the ESTABLISHED state, only resets with
sequence numbers exactly matching last_ack_sent will cause a reset,
all other segments will be silently dropped.
For connections in all other states, a reset anywhere in the window
will cause the connection to be reset. All other segments will be
silently dropped.
---
The necessity of accepting all in-window resets was discovered
by jayanth and jlemon, both of whom have seen TCP stacks that
will respond to FIN-ACK packets with resets not meeting the
strict last_ack_sent check.
Idea by: Darren Reed
Reviewed by: truckman, jlemon, others(?)
from tcp_hostcache would have overridden a (now) lower MTU of
an interface or route that changed since first PMTU discovery.
The bug would have caused TCP to redo the PMTU discovery when
not strictly necessary.
Make a comment about already pre-initialized default values
more clear.
Reviewed by: sam
amount of segments it will hold.
The following tuneables and sysctls control the behaviour of the tcp
segment reassembly queue:
net.inet.tcp.reass.maxsegments (loader tuneable)
specifies the maximum number of segments all tcp reassemly queues can
hold (defaults to 1/16 of nmbclusters).
net.inet.tcp.reass.maxqlen
specifies the maximum number of segments any individual tcp session queue
can hold (defaults to 48).
net.inet.tcp.reass.cursegments (readonly)
counts the number of segments currently in all reassembly queues.
net.inet.tcp.reass.overflows (readonly)
counts how often either the global or local queue limit has been reached.
Tested by: bms, silby
Reviewed by: bms, silby
them mostly with packet tags (one case is handled by using an mbuf flag
since the linkage between "caller" and "callee" is direct and there's no
need to incur the overhead of a packet tag).
This is (mostly) work from: sam
Silence from: -arch
Approved by: bms(mentor), sam, rwatson
This is the first of two commits; bringing in the kernel support first.
This can be enabled by compiling a kernel with options TCP_SIGNATURE
and FAST_IPSEC.
For the uninitiated, this is a TCP option which provides for a means of
authenticating TCP sessions which came into being before IPSEC. It is
still relevant today, however, as it is used by many commercial router
vendors, particularly with BGP, and as such has become a requirement for
interconnect at many major Internet points of presence.
Several parts of the TCP and IP headers, including the segment payload,
are digested with MD5, including a shared secret. The PF_KEY interface
is used to manage the secrets using security associations in the SADB.
There is a limitation here in that as there is no way to map a TCP flow
per-port back to an SPI without polluting tcpcb or using the SPD; the
code to do the latter is unstable at this time. Therefore this code only
supports per-host keying granularity.
Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6),
TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective
users of this feature, this will not pose any problem.
This implementation is output-only; that is, the option is honoured when
responding to a host initiating a TCP session, but no effort is made
[yet] to authenticate inbound traffic. This is, however, sufficient to
interwork with Cisco equipment.
Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with
local patches. Patches for tcpdump to validate TCP-MD5 sessions are also
available from me upon request.
Sponsored by: sentex.net
resource exhaustion attacks.
For network link optimization TCP can adjust its MSS and thus
packet size according to the observed path MTU. This is done
dynamically based on feedback from the remote host and network
components along the packet path. This information can be
abused to pretend an extremely low path MTU.
The resource exhaustion works in two ways:
o during tcp connection setup the advertized local MSS is
exchanged between the endpoints. The remote endpoint can
set this arbitrarily low (except for a minimum MTU of 64
octets enforced in the BSD code). When the local host is
sending data it is forced to send many small IP packets
instead of a large one.
For example instead of the normal TCP payload size of 1448
it forces TCP payload size of 12 (MTU 64) and thus we have
a 120 times increase in workload and packets. On fast links
this quickly saturates the local CPU and may also hit pps
processing limites of network components along the path.
This type of attack is particularly effective for servers
where the attacker can download large files (WWW and FTP).
We mitigate it by enforcing a minimum MTU settable by sysctl
net.inet.tcp.minmss defaulting to 256 octets.
o the local host is reveiving data on a TCP connection from
the remote host. The local host has no control over the
packet size the remote host is sending. The remote host
may chose to do what is described in the first attack and
send the data in packets with an TCP payload of at least
one byte. For each packet the tcp_input() function will
be entered, the packet is processed and a sowakeup() is
signalled to the connected process.
For example an attack with 2 Mbit/s gives 4716 packets per
second and the same amount of sowakeup()s to the process
(and context switches).
This type of attack is particularly effective for servers
where the attacker can upload large amounts of data.
Normally this is the case with WWW server where large POSTs
can be made.
We mitigate this by calculating the average MSS payload per
second. If it goes below 'net.inet.tcp.minmss' and the pps
rate is above 'net.inet.tcp.minmssoverload' defaulting to
1000 this particular TCP connection is resetted and dropped.
MITRE CVE: CAN-2004-0002
Reviewed by: sam (mentor)
MFC after: 1 day
rfc3042 Limited retransmit
rfc3390 Increasing TCP's initial congestion Window
inflight TCP inflight bandwidth limiting
All my production server have it enabled and there have been no
issues. I am confident about having them on by default and it gives
us better overall TCP performance.
Reviewed by: sam (mentor)
the routing table. Move all usage and references in the tcp stack
from the routing table metrics to the tcp hostcache.
It caches measured parameters of past tcp sessions to provide better
initial start values for following connections from or to the same
source or destination. Depending on the network parameters to/from
the remote host this can lead to significant speedups for new tcp
connections after the first one because they inherit and shortcut
the learning curve.
tcp_hostcache is designed for multiple concurrent access in SMP
environments with high contention and is hash indexed by remote
ip address.
It removes significant locking requirements from the tcp stack with
regard to the routing table.
Reviewed by: sam (mentor), bms
Reviewed by: -net, -current, core@kame.net (IPv6 parts)
Approved by: re (scottl)
the MAC label referenced from 'struct socket' in the IPv4 and
IPv6-based protocols. This permits MAC labels to be checked during
network delivery operations without dereferencing inp->inp_socket
to get to so->so_label, which will eventually avoid our having to
grab the socket lock during delivery at the network layer.
This change introduces 'struct inpcb' as a labeled object to the
MAC Framework, along with the normal circus of entry points:
initialization, creation from socket, destruction, as well as a
delivery access control check.
For most policies, the inpcb label will simply be a cache of the
socket label, so a new protocol switch method is introduced,
pr_sosetlabel() to notify protocols that the socket layer label
has been updated so that the cache can be updated while holding
appropriate locks. Most protocols implement this using
pru_sosetlabel_null(), but IPv4/IPv6 protocols using inpcbs use
the the worker function in_pcbsosetlabel(), which calls into the
MAC Framework to perform a cache update.
Biba, LOMAC, and MLS implement these entry points, as do the stub
policy, and test policy.
Reviewed by: sam, bms
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
o add assertions in tcp_respond to validate inpcb locking assumptions
o use local variable instead of chasing pointers in tcp_respond
Supported by: FreeBSD Foundation
in tcp_input that leave the function before hitting the tcp_trace
function call for the TCPDEBUG option. This has made TCPDEBUG mostly
useless (and tools like ports/benchmarks/dbs not working). Add
tcp_trace calls to the return paths that could be identified in this
maze.
This is a NOP unless you compile with TCPDEBUG.
lastest rev of the spec. Use an explicit flag for Fast Recovery. [1]
Fix bug with exiting Fast Recovery on a retransmit timeout
diagnosed by Lu Guohan. [2]
Reviewed by: Thomas Henderson <thomas.r.henderson@boeing.com>
Reported and tested by: Lu Guohan <lguohan00@mails.tsinghua.edu.cn> [2]
Approved by: Thomas Henderson <thomas.r.henderson@boeing.com>,
Sally Floyd <floyd@acm.org> [1]
sure that the MAC label on TCP responses during TIMEWAIT is
properly set from either the socket (if available), or the mbuf
that it's responding to.
Unfortunately, this is made somewhat difficult by the TCP code,
as tcp_twstart() calls tcp_twrespond() after discarding the socket
but without a reference to the mbuf that causes the "response".
Passing both the socket and the mbuf works arounds this--eventually
it might be good to make sure the mbuf always gets passed in in
"response" scenarios but working through this provided to
complicate things too much.
Approved by: re (scottl)
Reviewed by: hsu
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
doing Limited Transmit. Only artificially inflate the congestion
window by 1 segment instead of the usual 3 to take into account
the 2 already sent by Limited Transmit.
Approved in principle by: Mark Allman <mallman@grc.nasa.gov>,
Hari Balakrishnan <hari@nms.lcs.mit.edu>, Sally Floyd <floyd@icir.org>
that matches snd_max, then do not respond with an ack, just drop the
segment. This fixes a problem where a simultaneous close results in
an ack loop between two time-wait states.
Test case supplied by: Tim Robbins <tjr@FreeBSD.ORG>
Sponsored by: DARPA, NAI Labs
control block. Allow the socket and tcpcb structures to be freed
earlier than inpcb. Update code to understand an inp w/o a socket.
Reviewed by: hsu, silby, jayanth
Sponsored by: DARPA, NAI Labs
- delay acks for T/TCP regardless of delack setting
- fix bug where a single pass through tcp_input might not delay acks
- use callout_active() instead of callout_pending()
Sponsored by: DARPA, NAI Labs
