transferring session rights with them. Instead, create two
`/bin/cat' processes. A new child is spawned and disassociated from
the terminal and the parent, which continues with the rest of the ppp
process. Meanwhile, the parent spawns another child, and both the
parent and child exec the `/bin/cat' commands with the appropriate
descriptors. This way, the session is owned by the parent, and the
tty is held open.
o Close LCPs that have done a TLF and are now in ST_STOPPED before
calling Down. This prevents them from trying to come back up again
after the peer has shut them down (it seems a bit strange that the
rfc says that a Down in ST_STOPPED will cause a TLS etc).
o Don't try to set the physical link name pointer when we're receiving
and renaming a datalink. The physical hasn't been created yet, and as
it happens, the garbage physical pointer happens to be the value of another
physical - so we're pointing that other physical name at ourselves.
yeuck.
o Re-arrange the order of things in main (DoLoop()). We now handle
signals only after the select and not before the UpdateSet. It's
possible that either a signal (FSM timeout) or a descriptor_Read()
brings a link down, after which we'd better tidy up any dead direct
and 1off descriptors before calling UpdateSet() again.
o Mention when we detect a PPP packet when we see one before the link
is up (then start LCP as before).
It's now dealt with by the `server' object. This simplifies
things as we only have one list of prompt descriptors and
the log_ routines check prompt::logactive to determine
whether it should be used for output.
o Include the MP socket UpdateSet() result in bundle::UpdateSet().
o Don't select on the tun device unless we're in NETWORK
phase or AUTO mode.
o Stop the idle timer when we go to DEAD phase. We may
have transferred a link and not had a chance to kill
it.
o Don't fail when trying to unlink our transferred datalink
from our descriptor lists just before the transfer.
o Add our link descriptor to the write set if we got a short
write the last time (physical::out is set).
o Log the connection source address when a connection is closed.
o Remove descriptor::next field. Descriptor lists are not required
any more.
incoming fragments when a link goes down.
o Don't use the minimum sequence numbers of links that aren't open.
o Understand sequence number wrapping when determining the minimum
sequence number.
o Add & adjust a few comments.
thresholds (in terms of queued packets for a period of time)
where -auto links will be brought up and down. By default,
all auto links come up when we reach NETWORK phase and never
go down.
o Display current autoload state in `show bundle'.
o Disable the idle timer as soon as it's called.
o Disable the idle and autoload timers when exiting (in case
we're abending).
is not possible to switch to or from dedicated or direct mode,
but all other combinations are ok (eg. -auto -> -ddial).
o Cope with the fact that commands with optional context may not
be able to obtain a link with command_ChooseLink() (if all links
have been deleted for example).
o Allow `clone'ing in non-multilink mode. We may for example want
to configure two links in unilink mode and dial them both, using
the one that comes up first. It's also possible to rename
``deflink'' by cloning it, deleting the original, then setting
the mode of the new link.
the bundle has the opportunity to go PHASE_DEAD and cleanup
the interface (if it's the last link).
o Regnerate our phys_type value when we transfer the link.
o Always clean up the interface when destroying our bundle in case
we're abending.
o Always clean up our interface when the last link is gone rather than
delaying things 'till exit time in the -direct case (the interface
is useless anyway). Do this *after* slamming down our NCPs (if
they're still around).
o Our MP server descriptor now clears the relevent device descriptor
from our descriptor [fd]sets when a datalink is on death-row (to
be transferred to another running ppp), thus avoiding the possibility
of passing a bum descriptor to select() and having ppp abend.
o Handle the MP socket descriptor functions from within the bundle
descriptor functions. Now we ensure that the MP socket descriptor
functions see the descriptor sets *after* they've been seen by our
datalinks.
o Add/fix a few more comments.
into the ST_STOPPED state.
o Allow an optional ccp|lcp argument to `down'. The default is
still lcp (as before). You can now call down with no context
in multilink mode, in which case it'll down the multilink ccp
or the entire bundle (*very* rude).
o Allow an optional `!' after `close ccp' (close ccp!) to tell
ccp to stay in the CLOSED state after the terminate ACK. The
default is now to re-enter STOPPED so that the peer can bring
the layer back up if desired.
o Always handle proto-compressed packets, even if we've agreed
(in LCP) that the peer will not send us 1 byte protocols.
If the peer violates the LCP agreement, log it to the HDLC
log.
o Fix some comments.
o Log FD_SET()s in LogTIMER.
o Identify the descriptor that causes an EBADF from select()
if LogTIMER is enabled (then exit).
o Call the MP server UpdateSet() function after calling
the UpdateSet() for all links - the link may enter
PHASE_TERMINATE and bring down the MP server - breaking
the imminent select().
the first ``%d'' in the unix-domain socket name with the
current interface unit number. In the case of tcp ports, allow
a ``+'' prefix to add the unit number to the specified port
number.
o Remove all mention of SIGUSR1 (was already #ifdef'd out). We
can't create diagnostic sockets on-the-fly with a signal any
more because there's no way of specifying the password without
confusing matters with the previous ppp.secret scenario.
LQM and HDLC timer diagnostics come out with the correct name.
o Don't send an LQR immediately upon reviving a datalink. Leave
it 'till the next timeout.
o Add the link name to some more LQR diagnostics.
o Break out of the main loop when a descriptor exception is seen
in select().
o Remove the evil nointr_[u]sleep() functions. Timers should be
(and are) used instead.
o Treat a read() of 0 bytes as an error that's fatal to the link
on which the read() is done. We should never read() 0 after
select() says there's something there - not unless the link
has been closed by the other side.
o Write the data seen before a HDLC header to the terminal in
`term' mode, *not* back to the modem :-/
o Initialise our transmitted file descriptor before starting any
timers.
o Only send data links that have *no* pending output data. This
means that our final ACK will be written rather than being
nuked with the datalink transmission.
for the last NCP TLF.
o Move tun reading from the main loop into the bundle descriptor
handling routines.
o Cosmetic: Add a few `const's and make some diagnostics clearer.
Any `add' or `delete' command that uses MYADDR or HISADDR
will be added to the sticky route list (show ipcp). When
MYADDR or HISADDR change due to IPCP negotiations, and if
`sroutes' is enabled (the default), all sticky route
entries are updated in the routing table.
The end result is that `add default hisaddr' will ``stick'',
as will ``add myaddr 255.255.255.255 127.0.0.1'' and
``add 1.2.3.4 255.255.255.0 hisaddr''.
according to SHORTSEQ negotiation.
o Don't forget to attach incoming fragments with a
number greater than everything else in the queue
(rather than leaking memory).
o Output the link name with the ``other'' hdlc
diagnostic message.
o Correct a VJ diagnostic (`COMPPROTO', not `proto').
throughput measurement is enabled).
o Load balance the links based on weight *and* on a round-robin
basis. This makes things fairly even on an output basis. We
don't try to allow for the peer sending all his data down one
link (and try to send ours back up the other).
o Show the number of pending input buffers that can't be processed
in ``show mp''.
o Fix a typo in the man page.
