- Extend the list of main libraries of section 3
- Extend the library functions that are included in the libc
MFC after: 2 weeks
Submitted by: Naga Chaitanya Vellanki <pnagato at protonmail dot com>
Approved by: gbe
Differential Revision: https://reviews.freebsd.org/D26476
Add a wrapping script to use ATF to run tests written with Googletest
one by one. This helps locating and tracking the failing case in CI easier.
This is a temporarily solution while Googletest support in Kyua is developing.
We will revert this once Kyua+Googletest integration is ready.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25896
VirtFS allows sharing an arbitrary directory tree between bhyve virtual
machine and the host. Current implementation has a fairly complete support
for 9P2000.L protocol, except for the extended attribute support. It has
been verified to work with the qemu-kvm hypervisor.
Reviewed by: rgrimes, emaste, jhb, trasz
Approved by: trasz (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: Conclusive Engineering (development), vStack.com (funding)
Differential Revision: https://reviews.freebsd.org/D10335
This is a simple subsystem that allow drivers to register as a backlight.
Each backlight creates a device node under /dev/backlight/backlightX and
an alias based on the name provided.
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26250
Clang 12 warns about passing a path to -fuse-ld and -Werror makes that
an error preventing building world without this change.
Reviewed by: arichardson, emaste
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26591
For interfaces that do not support SIOCGIFMEDIA (for which there are
quite a few) the only fallback is to query the interface for
if_data->ifi_link_state. While it's possible to get at if_data for an
interface via getifaddrs(3) or sysctl, both are heavy weight mechanisms.
SIOCGIFDATA is a simple ioctl to retrieve this fast with very little
resource use in comparison. This implementation mirrors that of other
similar ioctls in FreeBSD.
Submitted by: Roy Marples <roy@marples.name>
Reviewed by: markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D26538
Document the new powerpc64le arch's initial specifications.
Certain things are subject to change while this is experimental. The most
likely change is that long double may switch to quad, dependent on POWER8
emulation assistance for __float128 being set up in the compiler (as
POWER8 does not have IEEE-compatible 128-bit hardware float, unlike POWER9.)
Sponsored by: Tag1 Consulting, Inc.
This is the initial set up for PowerPC64LE.
The current plan is for this arch to remain experimental for FreeBSD 13.
This started as a weekend learning project for me and kinda snowballed from
there.
(More to follow momentarily.)
Reviewed by: imp (earlier version), emaste
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D26399
Document the calls to send messages to userland via devctl.
devctl_notify will create a message for the specified system,
subsystem and type, optionally adding additional information.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D26520
Belatedly document the quoting requirements for the devctl protocol. I
thought they'd been previously documented.
Also, while I'm here, make igor happy.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D26520
This routine centralizes the knowledge needed for properly quoting
'value' in all key="value" items that appear in devctl messages.
Reviewed by: bcr
Differential Revision: https://reviews.freebsd.org/D26520
This allows the PF interfaces to communicate with the VF interfaces over
the internal switch in the ASIC. Fix the GL limits for VM work requests
while here.
MFC after: 3 days
Sponsored by: Chelsio Communications
An upcoming patch to use the bitset macros for tracking vm page
dump information could conceivably need more than INT_MAX bits.
Expand the bit type to long so that the extra range is available
on 64-bit platforms where it would most likely be needed.
CPUSET_COUNT and DOMAINSET_COUNT are also modified to remain of
type `int`.
Reviewed by: kib, markj
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26190
This adds the getenv_bool() function, to parse a boolean value from a
kernel environment variable or tunable. This works for traditional
boolean values like "0" and "1", and also "true" and "false"
(case-insensitive). These semantics do not yet apply to sysctls declared
using SYSCTL_BOOL with CTLFLAG_TUN (they still only parse 1 and 0).
Also added are two wrapper functions, getenv_is_true() and
getenv_is_false(). These are slightly simpler for callers wishing to
perform a single check of a configuration variable.
Reviewed by: jhb (slightly earlier version)
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26270
bootonce feature is temporary, one time boot, activated by
"bectl activate -t BE", "bectl activate -T BE" will reset the bootonce flag.
By default, the bootonce setting is reset on attempt to boot and the next
boot will use previously active BE.
By setting zfs_bootonce_activate="YES" in rc.conf, the bootonce BE will
be set permanently active.
bootonce dataset name is recorded in boot pool labels, bootenv area.
in case of nextboot, the nextboot_enable boolean variable is recorded in
freebsd:nvstore nvlist, also stored in boot pool label bootenv area.
On boot, the loader will process /boot/nextboot.conf if nextboot_enable
is "YES", and will set nextboot_enable to "NO", preventing /boot/nextboot.conf
processing on next boot.
bootonce and nextboot features are usable in both UEFI and BIOS boot.
To use bootonce/nextboot features, the boot loader needs to be updated on disk;
if loader.efi is stored on ESP, then ESP needs to be updated and
for BIOS boot, stage2 (zfsboot or gptzfsboot) needs to be updated
(gpart or other tools).
At this time, only lua loader is updated.
Sponsored by: Netflix, Klara Inc.
Differential Revision: https://reviews.freebsd.org/D25512
One problem with the bus_space_read_N() and bus_space_write_N() family of
functions is that they provide no protection against exceptions which can
occur when no physical hardware or device responds to the read or write
cycles. In such a situation, the system typically would panic due to a
kernel-mode bus error. The bus_space_peek_N() and bus_space_poke_N() family
of functions provide a mechanism to handle these exceptions gracefully
without the risk of crashing the system.
Typical example is access to PCI(e) configuration space in bus enumeration
function on badly implemented PCI(e) root complexes (RK3399 or Neoverse
N1 N1SDP and/or access to PCI(e) register when device is in deep sleep state.
This commit adds a real implementation for arm64 only. The remaining
architectures have bus_space_peek()/bus_space_poke() emulated by using
bus_space_read()/bus_space_write() (without exception handling).
MFC after: 1 month
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D25371
As we do for shared library binaries, pass -S to install(1) when
installing symlinks. Doing so helps avoid transient failures when
libraries are being reinstalled, which seems to be the root cause of
spurious libgcc_s.so link failures during CI builds.
PR: 233769
Reviewed by: emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26453
The current default is provided in various Makefile.inc in some top-level
directories and covers a good portion of the tree, but doesn't cover parts
of the build a little deeper (e.g. libcasper).
Provide a default in src.sys.mk and set WARNS to it in bsd.sys.mk if that
variable is defined. This lets us relatively cleanly provide a default WARNS
no matter where you're building in the src tree without breaking things
outside of the tree.
Crunchgen has been updated as a bootstrap tool to work on this change
because it needs r365605 at a minimum to succeed. The cleanup necessary to
successfully walk over this change on WITHOUT_CLEAN builds has been added.
There is a supplemental project to this to list all of the warnings that are
encountered when the environment has WARNS=6 NO_WERROR=yes:
https://warns.kevans.dev -- this project will hopefully eventually go away
in favor of CI doing a much better job than it.
Reviewed by: emaste, brooks, ngie (all earlier version)
Reviewed by: emaste, arichardson (depend-cleanup.sh change)
Differential Revision: https://reviews.freebsd.org/D26455
Hardware assistance includes checksumming (tx and rx), TSO, and RSS on
the inner traffic in a VXLAN tunnel.
Relnotes: Yes
Sponsored by: Chelsio Communications
This lets a VXLAN pseudo-interface take advantage of hardware checksumming (tx
and rx), TSO, and RSS if the NIC is capable of performing these operations on
inner VXLAN traffic.
A VXLAN interface inherits the capabilities of its vxlandev interface if one is
specified or of the interface that hosts the vxlanlocal address. If other
interfaces will carry traffic for that VXLAN then they must have the same
hardware capabilities.
On transmit, if_vxlan verifies that the outbound interface has the required
capabilities and then translates the CSUM_ flags to their inner equivalents.
This tells the hardware ifnet that it needs to operate on the inner frame and
not the outer VXLAN headers.
An event is generated when a VXLAN ifnet starts. This allows hardware drivers to
configure their devices to expect VXLAN traffic on the specified incoming port.
On receive, the hardware does RSS and checksum verification on the inner frame.
if_vxlan now does a direct netisr dispatch to take full advantage of RSS. It is
not very clear why it didn't do this already.
Future work:
Rx: it should be possible to avoid the first trip up the protocol stack to get
the frame to if_vxlan just so it can decapsulate and requeue for a second trip
up the stack. The hardware NIC driver could directly call an if_vxlan receive
routine for VXLAN traffic instead.
Rx: LRO. depends on what happens with the previous item. There will have to to
be a mechanism to indicate that it's time for if_vxlan to flush its LRO state.
Reviewed by: kib@
Relnotes: Yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25873
Use of ranlib or lorder is no longer necessary with current linkers
(probably anything newer than ~1990) and ar's ability to create an object
index and symbol table in the archive.
Currently the build system uses lorder+tsort to sort the .o files in
dependency order so that a single-pass linker can use them. However,
we can use the -s flag to ar to add an index to the .a file which makes
lorder unnecessary.
Running ar -s is equivalent to running ranlib afterwards, so we can also
skip the ranlib invocation.
Similarly, we don't have to pass the .o files for shared libraries in
dependency order since both ld.bfd and ld.lld will correctly resolve
references between the .o files.
This removes many fork()+execve calls for each library so should speed up
builds a bit. Additionally lorder.sh uses a regular expression that is not
supported by the macOS libc or glibc and results in many warnings when
cross-building (see D25989).
There is one functional change: lorder.sh removed duplicated .o files
from the linker command line which now no longer happens. I fixed the duplicates
in the base system in r364649. I also checked the ports tree for uses of
bsd.lib.mk and found one duplicate source file which I fixed in r548168.
Most ports use CMake/autotools rather than bsd.lib.mk but if this breaks any
ports that I missed in my search please let me know.
Avoiding the shell script actually speeds up the linking step noticeably: I
measured how long it takes to rebuild the .a and .so files for lib/libc using a
basic benchmark: `rm $LIBC_OBJDIR/*.so* $LIBC_OBJDIR/*.a* && /usr/bin/time make -DWITHOUT_TESTS -s > /dev/null`
Without this change ~4.5 seconds and afterwards ~3.1 seconds.
Looking at truss -cf output we can see that the number fork() system
calls goes down from 27 to 12 (and the speedup while tracing is more
noticeable: 81 seconds -> 65 seconds).
See also https://www.gnu.org/software/coreutils/manual/html_node/tsort-background.html
for some more background:
This whole procedure has been obsolete since about 1980, because Unix
archives now contain a symbol table (traditionally built by ranlib, now
generally built by ar itself), and the Unix linker uses the symbol table
to effectively make multiple passes over an archive file.
Or alternatively https://www.unix.com/man-page/osf1/1/lorder/:
The lorder command is essentially obsolete. Use the following command in
its place: % ar -ts file.a
Reviewed By: emaste, imp, dim
Differential Revision: https://reviews.freebsd.org/D26044
