KATO Takenori
0000fd92fd
(1) Change iomem of SMIT transfer mode from 0xdd000 (BIOS ROM base
...
address+0x1000) into 0xdc000 (BIOS ROM base address).
(2) Add sample line for Logitec LHA-20x SCSI card.
(3) Change I/O port address of ed8 (C-NET(98) card) from 0x00d0 into
0x03d0 (vendor default).
Submitted by: Michio "Karl" Jibo <karl@marcer.nagaokaut.ac.jp>
1997-01-04 09:01:57 +00:00
KATO Takenori
d3191c67bf
Clean-up.
...
Submitted by: Michio "Karl" Jinbo <karl@marcer.nagaokaut.ac.jp>
1997-01-04 08:32:33 +00:00
KATO Takenori
f825359008
Staticize dma_bouncebuf. This variable was kept global because sbic
...
driver used it. The sbic driver has been obsoleted now, so the
variable can be static as that in isa.c.
This is a 2.2 candidate.
1997-01-04 06:48:28 +00:00
KATO Takenori
1cd7883776
Correct I/O port address table for ELECOM LD-BDN ethernet card.
...
Should be in 2.2.
1997-01-04 06:42:43 +00:00
KATO Takenori
a2aded7b8e
Add `#ifdef PC98' to include PC98-specific code. Add declaration of the
...
function rtc_outb().
This is a 2.2 candidate.
1997-01-04 06:38:46 +00:00
KATO Takenori
674d08dbc0
Oops, delete extra push %edi and push %esi in memsize().
...
Submitted by: Michio "Karl" Jinbo <karl@marcer.nagaokaut.ac.jp>
1997-01-03 16:21:08 +00:00
KATO Takenori
c4948ba6a1
Change IMR of master PIC from 0x7f into 0xff in isa_defaultirq().
...
This is a 2.2 candidate.
1997-01-03 07:45:41 +00:00
KATO Takenori
134223b928
Synchronize with sys/i386/isa/npx.c revision 1.35 (disable
...
i586-optimized copyin and copyout).
1996-12-29 08:14:02 +00:00
KATO Takenori
cbecba19cc
Synchronize with sys/i386/i386/machdep.c revision 1.223 (clean-up of
...
useracc call).
1996-12-29 08:10:30 +00:00
KATO Takenori
2cc3289940
Staticize dmapageport and isa_dmarangecheck.
1996-12-27 13:06:31 +00:00
KATO Takenori
d2ff8b7ea8
Synchronize with sys/i386/isa/sio.c revision 1.155 (use breakpoint()
...
instead of Debugger()).
1996-12-24 11:47:52 +00:00
KATO Takenori
eb94d127fd
Synchronize with sys/i386/i386/userconfig.c revision 1.79 (cosmetic
...
change).
1996-12-24 11:44:33 +00:00
KATO Takenori
92098ddad4
Improve probe routine for CONTEC C-NET(98) card. I/O port and memory
...
window addresses don't need to be set as default values.
Submitted by: Yoshimasa Ohnishi <ohnishi@isc.kyutech.ac.jp>
1996-12-21 14:32:35 +00:00
KATO Takenori
1ffb3da27a
Add `#include <pc98/pc98/pc98.h>'.
1996-12-20 12:25:13 +00:00
KATO Takenori
5e5acca867
Synchronize with sys/i386/isa/mse.c revision 1.29 (test in mseopen).
1996-12-20 10:59:37 +00:00
KATO Takenori
451cbc3eff
Synchronize with sys/i386/isa/syscons.c revision 1.192 (fix typo).
1996-12-20 10:49:23 +00:00
KATO Takenori
d2db0031ba
Add `ep' driver support.
...
Submitted by: Naoki Hamada <nao@sbl.cl.nec.co.jp>
1996-12-19 15:48:55 +00:00
KATO Takenori
ed933d0050
Synchronize with sys/i386/i386/trap.c revision 1.84 (handle
...
copyin/out/etc code).
1996-12-19 08:27:33 +00:00
KATO Takenori
a413ea0d8a
Synchronize with sys/i386/isa/fd.c revision 1.94 (disable disk
...
statistics support).
1996-12-19 08:17:08 +00:00
KATO Takenori
c463389910
Delete comment for "sbic" driver.
...
2.2 candidate.
1996-12-18 20:54:22 +00:00
KATO Takenori
1dbf6ded7b
Sync with sys/i386/i386/userconfig.c revision 1.78 (amd driver entry).
1996-12-18 20:52:31 +00:00
KATO Takenori
a3e2897cd4
Sync with sys/i386/i386/machdep.c revision 1.222 (move printing of
...
BIOS geometry).
1996-12-18 20:50:44 +00:00
KATO Takenori
a8d9c79cf8
(1) Fix typo.
...
(2) Change I/O port addresses of ed3(MELCO LGY) and ed9(CONTEC C-NET).
1996-12-17 14:37:43 +00:00
KATO Takenori
aacc3ca391
Sync with i386/i386/userconfig.c revision 1.77 (I/O port limit).
1996-12-17 13:29:05 +00:00
KATO Takenori
f605549c19
Sync with i386/i386/machdep.c revision 1.221 (fix nbuf calculation).
1996-12-17 13:26:17 +00:00
KATO Takenori
e5ff55e4d8
Synchronize with sys/i386/i386/userconfig.s revision 1.76 (update
...
comment for "ncr" SCSI controllers).
1996-12-16 17:36:48 +00:00
KATO Takenori
c9cfeed054
Fix typo.
1996-12-15 10:07:09 +00:00
KATO Takenori
7c9e95434e
Synchronize with sys/i386/i386/userconfig.c revison 1.74.
...
Definite 2.2 candidate.
1996-12-15 09:37:43 +00:00
KATO Takenori
fbec974b94
Synchronize with sys/i386/i386/userconfig.c revision 1.72 and 1.73.
1996-12-15 09:35:49 +00:00
KATO Takenori
2248a5a700
Synchronize with sys/i386/boot/rawboot/Makefile revison 1.4.
1996-12-15 09:22:52 +00:00
KATO Takenori
cc48749980
Synchronize with sys/i386/i386/machdep.c revision 1.220.
...
Definite 2.2 candidate.
1996-12-15 09:18:48 +00:00
KATO Takenori
e03ccd3078
Synchronize with if_ed.c revision 1.111 and if_fe.c revision 1.22.
1996-12-15 09:14:48 +00:00
KATO Takenori
f41f7d4617
Synchronize with Makefile.i386 revison 1.91.
1996-12-15 09:09:53 +00:00
KATO Takenori
54c5d00f71
Synchronize with sys/i386/i386/machdep.c revision 1.219.
...
2.2 candidate.
1996-12-12 13:10:50 +00:00
KATO Takenori
9e4ccf430e
Sync with sys/i386/boot/biosboot/disk.c revision 1.23.
1996-12-11 16:58:01 +00:00
KATO Takenori
8b3e08191a
Sync with sys/i386/isa/if_ed.c revision 1.110.
...
It's not 2.2 candidate.
1996-12-11 16:55:27 +00:00
KATO Takenori
0a44b61dc5
Sync with sys/i386/i386/machdep.c revision 1.218.
...
It's not 2.2 candidate.
1996-12-11 16:51:15 +00:00
KATO Takenori
7efdf00874
Synchronize with IBM-PC's userconfig.c revision 1.71.
...
Should not be in 2.2 until original change is merged into 2.2.
1996-12-09 15:21:04 +00:00
KATO Takenori
6f1344579b
Synchronize with sys/i386/isa/syscons.c revision 1.191. This change
...
just keeps appearance, and no effect on the PC98.
2.2 candidate.
1996-12-08 16:27:26 +00:00
KATO Takenori
c918e9eece
Synchronize with sys/i386/isa/if_ed.c revision 1.09.
...
It's a 2.2 candidate.
1996-12-07 13:04:21 +00:00
KATO Takenori
91a8839315
Change obsolete SBIC55 into SCSI in a comment line.
...
Definite 2.2 candidate.
1996-12-07 12:59:36 +00:00
KATO Takenori
b0c23b0c8e
Synchronize with sys/i386/i386/machdep.c revision 1.217.
...
This should not be in 2.2 until original change is merged.
1996-12-06 19:51:49 +00:00
Satoshi Asami
7a8e4111ee
Syncronize.
...
Submitted by: The FreeBSD(98) Development Team
1996-12-04 04:36:59 +00:00
Satoshi Asami
778128e3f9
Replace sbic driver (WD33C93 SCSI card driver) with new bs driver.
...
Submitted by: The FreeBSD(98) Development Team
Obtained from: NetBSD/pc98 based on NetBSD 1.2
1996-12-04 04:32:52 +00:00
Satoshi Asami
f48465862b
Synchronize with the RELENG_2_2 branch.
...
Definite 2.2 candidate.
Submitted by: The FreeBSD(98) Development Team
1996-12-04 04:21:30 +00:00
Bruce Evans
4eb73cdaff
Removed all references to b_cylinder (aka b_cylin). It was evil and
...
hasn't been used for a year or two since disksort() started sorting
on b_pblkno.
1996-12-01 16:34:41 +00:00
Satoshi Asami
7c219eac8f
Some more updates.
...
wdreg.h: Delete wd_ctlr macro. PC98 version of wd.c treats it as a
variable.
GENERIC98: Delete ep0 entry. Current ep driver write I/O port 0x100.
This clobbers ICW of i8259, because upper 8bits of address line is not
masked on mother board.
if_fe.c: Merge from revision 1.18 of sys/i386/isa/if_fe.c.
pc98.c: Globalize dmapageport, because SCSI driver use this
variable.
wd82371.c: Yet another merge.
These are 2.2 candidates.
Submitted by: The FreeBSD(98) Development Team
1996-11-14 08:46:21 +00:00
Satoshi Asami
3c6350967c
Another round of resync and some added sound support.
...
sys/pc98/i386/machdep.c: sync with i386/i386/machdep.c
sys/pc98/conf/options.pc98: sync with i386/conf/options.i386
sys/i386/isa/sound: DMA auto initialize mode support for PC98.
contributed by: Akio Morita <amorita@bird.scphys.kyoto-u.ac.jp>
Definite 2.2 material, I believe.
Submitted by: The FreeBSD (98) Development Team
1996-11-13 02:00:17 +00:00
Satoshi Asami
6b2f48440f
Re-sync with -current. Should be in 2.2.
...
Submitted by: The FreeBSD(98) Development Team
1996-11-09 00:39:59 +00:00
Satoshi Asami
634e26af7a
(1) Update
...
(2) Don't depend on BOOTSEG
(3) Change BOOTSEG from 0x9000 to 0x1000
Should be in 2.2.
Submitted by: FreeBSD(98) Development Team
1996-11-09 00:18:25 +00:00