The LLD implementation of Tag_ABI_VFP_args needs to check the rarely
seen values of 3 (toolchain specific) and 4 compatible with both Base
and VFP. Add the missing enumeration values so that LLD can refer to
them without having to use the raw numbers.
Obtained from: llvm r338373 by Peter Smith
The ELF for the Arm architecture document defines, for EF_ARM_EABI_VER5
and above, the flags EF_ARM_ABI_FLOAT_HARD and EF_ARM_ABI_FLOAT_SOFT.
These have been defined to be compatible with the existing
EF_ARM_VFP_FLOAT and EF_ARM_SOFT_FLOAT used by gcc for
EF_ARM_EABI_UNKNOWN.
This patch adds the flags in addition to the existing ones so that any
code depending on the old names will still work.
Obtained from: llvm r338370 by Peter Smith
EFLAGS copy that lives out of a basic block!" errors on i386.
Pull in r325446 from upstream clang trunk (by me):
[X86] Add 'sahf' CPU feature to frontend
Summary:
Make clang accept `-msahf` (and `-mno-sahf`) flags to activate the
`+sahf` feature for the backend, for bug 36028 (Incorrect use of
pushf/popf enables/disables interrupts on amd64 kernels). This was
originally submitted in bug 36037 by Jonathan Looney
<jonlooney@gmail.com>.
As described there, GCC also uses `-msahf` for this feature, and the
backend already recognizes the `+sahf` feature. All that is needed is
to teach clang to pass this on to the backend.
The mapping of feature support onto CPUs may not be complete; rather,
it was chosen to match LLVM's idea of which CPUs support this feature
(see lib/Target/X86/X86.td).
I also updated the affected test case (CodeGen/attr-target-x86.c) to
match the emitted output.
Reviewers: craig.topper, coby, efriedma, rsmith
Reviewed By: craig.topper
Subscribers: emaste, cfe-commits
Differential Revision: https://reviews.llvm.org/D43394
Pull in r328944 from upstream llvm trunk (by Chandler Carruth):
[x86] Expose more of the condition conversion routines in the public
API for X86's instruction information. I've now got a second patch
under review that needs these same APIs. This bit is nicely
orthogonal and obvious, so landing it. NFC.
Pull in r329414 from upstream llvm trunk (by Craig Topper):
[X86] Merge itineraries for CLC, CMC, and STC.
These are very simple flag setting instructions that appear to only
be a single uop. They're unlikely to need this separation.
Pull in r329657 from upstream llvm trunk (by Chandler Carruth):
[x86] Introduce a pass to begin more systematically fixing PR36028
and similar issues.
The key idea is to lower COPY nodes populating EFLAGS by scanning the
uses of EFLAGS and introducing dedicated code to preserve the
necessary state in a GPR. In the vast majority of cases, these uses
are cmovCC and jCC instructions. For such cases, we can very easily
save and restore the necessary information by simply inserting a
setCC into a GPR where the original flags are live, and then testing
that GPR directly to feed the cmov or conditional branch.
However, things are a bit more tricky if arithmetic is using the
flags. This patch handles the vast majority of cases that seem to
come up in practice: adc, adcx, adox, rcl, and rcr; all without
taking advantage of partially preserved EFLAGS as LLVM doesn't
currently model that at all.
There are a large number of operations that techinaclly observe
EFLAGS currently but shouldn't in this case -- they typically are
using DF. Currently, they will not be handled by this approach.
However, I have never seen this issue come up in practice. It is
already pretty rare to have these patterns come up in practical code
with LLVM. I had to resort to writing MIR tests to cover most of the
logic in this pass already. I suspect even with its current amount
of coverage of arithmetic users of EFLAGS it will be a significant
improvement over the current use of pushf/popf. It will also produce
substantially faster code in most of the common patterns.
This patch also removes all of the old lowering for EFLAGS copies,
and the hack that forced us to use a frame pointer when EFLAGS copies
were found anywhere in a function so that the dynamic stack
adjustment wasn't a problem. None of this is needed as we now lower
all of these copies directly in MI and without require stack
adjustments.
Lots of thanks to Reid who came up with several aspects of this
approach, and Craig who helped me work out a couple of things
tripping me up while working on this.
Differential Revision: https://reviews.llvm.org/D45146
Pull in r329673 from upstream llvm trunk (by Chandler Carruth):
[x86] Model the direction flag (DF) separately from the rest of
EFLAGS.
This cleans up a number of operations that only claimed te use EFLAGS
due to using DF. But no instructions which we think of us setting
EFLAGS actually modify DF (other than things like popf) and so this
needlessly creates uses of EFLAGS that aren't really there.
In fact, DF is so restrictive it is pretty easy to model. Only STD,
CLD, and the whole-flags writes (WRFLAGS and POPF) need to model
this.
I've also somewhat cleaned up some of the flag management instruction
definitions to be in the correct .td file.
Adding this extra register also uncovered a failure to use the
correct datatype to hold X86 registers, and I've corrected that as
necessary here.
Differential Revision: https://reviews.llvm.org/D45154
Pull in r330264 from upstream llvm trunk (by Chandler Carruth):
[x86] Fix PR37100 by teaching the EFLAGS copy lowering to rewrite
uses across basic blocks in the limited cases where it is very
straight forward to do so.
This will also be useful for other places where we do some limited
EFLAGS propagation across CFG edges and need to handle copy rewrites
afterward. I think this is rapidly approaching the maximum we can and
should be doing here. Everything else begins to require either heroic
analysis to prove how to do PHI insertion manually, or somehow
managing arbitrary PHI-ing of EFLAGS with general PHI insertion.
Neither of these seem at all promising so if those cases come up,
we'll almost certainly need to rewrite the parts of LLVM that produce
those patterns.
We do now require dominator trees in order to reliably diagnose
patterns that would require PHI nodes. This is a bit unfortunate but
it seems better than the completely mysterious crash we would get
otherwise.
Differential Revision: https://reviews.llvm.org/D45673
Together, these should ensure clang does not use pushf/popf sequences to
save and restore flags, avoiding problems with unrelated flags (such as
the interrupt flag) being restored unexpectedly.
Requested by: jtl
PR: 225330
MFC after: 1 week
[X86] Add 'sahf' CPU feature to frontend
Summary:
Make clang accept `-msahf` (and `-mno-sahf`) flags to activate the
`+sahf` feature for the backend, for bug 36028 (Incorrect use of
pushf/popf enables/disables interrupts on amd64 kernels). This was
originally submitted in bug 36037 by Jonathan Looney
<jonlooney@gmail.com>.
As described there, GCC also uses `-msahf` for this feature, and the
backend already recognizes the `+sahf` feature. All that is needed is
to teach clang to pass this on to the backend.
The mapping of feature support onto CPUs may not be complete; rather,
it was chosen to match LLVM's idea of which CPUs support this feature
(see lib/Target/X86/X86.td).
I also updated the affected test case (CodeGen/attr-target-x86.c) to
match the emitted output.
Reviewers: craig.topper, coby, efriedma, rsmith
Reviewed By: craig.topper
Subscribers: emaste, cfe-commits
Differential Revision: https://reviews.llvm.org/D43394
Pull in r328944 from upstream llvm trunk (by Chandler Carruth):
[x86] Expose more of the condition conversion routines in the public
API for X86's instruction information. I've now got a second patch
under review that needs these same APIs. This bit is nicely
orthogonal and obvious, so landing it. NFC.
Pull in r329414 from upstream llvm trunk (by Craig Topper):
[X86] Merge itineraries for CLC, CMC, and STC.
These are very simple flag setting instructions that appear to only
be a single uop. They're unlikely to need this separation.
Pull in r329657 from upstream llvm trunk (by Chandler Carruth):
[x86] Introduce a pass to begin more systematically fixing PR36028
and similar issues.
The key idea is to lower COPY nodes populating EFLAGS by scanning the
uses of EFLAGS and introducing dedicated code to preserve the
necessary state in a GPR. In the vast majority of cases, these uses
are cmovCC and jCC instructions. For such cases, we can very easily
save and restore the necessary information by simply inserting a
setCC into a GPR where the original flags are live, and then testing
that GPR directly to feed the cmov or conditional branch.
However, things are a bit more tricky if arithmetic is using the
flags. This patch handles the vast majority of cases that seem to
come up in practice: adc, adcx, adox, rcl, and rcr; all without
taking advantage of partially preserved EFLAGS as LLVM doesn't
currently model that at all.
There are a large number of operations that techinaclly observe
EFLAGS currently but shouldn't in this case -- they typically are
using DF. Currently, they will not be handled by this approach.
However, I have never seen this issue come up in practice. It is
already pretty rare to have these patterns come up in practical code
with LLVM. I had to resort to writing MIR tests to cover most of the
logic in this pass already. I suspect even with its current amount
of coverage of arithmetic users of EFLAGS it will be a significant
improvement over the current use of pushf/popf. It will also produce
substantially faster code in most of the common patterns.
This patch also removes all of the old lowering for EFLAGS copies,
and the hack that forced us to use a frame pointer when EFLAGS copies
were found anywhere in a function so that the dynamic stack
adjustment wasn't a problem. None of this is needed as we now lower
all of these copies directly in MI and without require stack
adjustments.
Lots of thanks to Reid who came up with several aspects of this
approach, and Craig who helped me work out a couple of things
tripping me up while working on this.
Differential Revision: https://reviews.llvm.org/D45146
Pull in r329673 from upstream llvm trunk (by Chandler Carruth):
[x86] Model the direction flag (DF) separately from the rest of
EFLAGS.
This cleans up a number of operations that only claimed te use EFLAGS
due to using DF. But no instructions which we think of us setting
EFLAGS actually modify DF (other than things like popf) and so this
needlessly creates uses of EFLAGS that aren't really there.
In fact, DF is so restrictive it is pretty easy to model. Only STD,
CLD, and the whole-flags writes (WRFLAGS and POPF) need to model
this.
I've also somewhat cleaned up some of the flag management instruction
definitions to be in the correct .td file.
Adding this extra register also uncovered a failure to use the
correct datatype to hold X86 registers, and I've corrected that as
necessary here.
Differential Revision: https://reviews.llvm.org/D45154
Together, these should ensure clang does not use pushf/popf sequences to
save and restore flags, avoiding problems with unrelated flags (such as
the interrupt flag) being restored unexpectedly.
Requested by: jtl
PR: 225330
MFC after: 1 week
Don't treat .symver as a regular alias definition.
This patch starts simplifying the handling of .symver.
For now it just moves the responsibility for creating an alias down to
the streamer. With that the asm streamer can pass a .symver unchanged,
which is nice since gas cannot parse "foo@bar = zed".
In a followup I hope to move the handling down to the writer so that
we don't need special hacks for avoiding breaking names with @@@ on
windows.
Pull in r327160 from upstream llvm trunk (by Rafael Espindola):
Delay creating an alias for @@@.
With this we only create an alias for @@@ once we know if it should
use @ or @@. This avoids last minutes renames and hacks to handle MS
names.
This only handles the ELF writer. LTO still has issues with @@@
aliases.
Pull in r327928 from upstream llvm trunk (by Vitaly Buka):
Object: Move attribute calculation into RecordStreamer. NFC
Summary: Preparation for D44274
Reviewers: pcc, espindola
Subscribers: hiraditya
Differential Revision: https://reviews.llvm.org/D44276
Pull in r327930 from upstream llvm trunk (by Vitaly Buka):
Object: Fix handling of @@@ in .symver directive
Summary:
name@@@nodename is going to be replaced with name@@nodename if symbols is
defined in the assembled file, or name@nodename if undefined.
https://sourceware.org/binutils/docs/as/Symver.html
Fixes PR36623
Reviewers: pcc, espindola
Subscribers: mehdi_amini, hiraditya
Differential Revision: https://reviews.llvm.org/D44274
Together, these changes fix handling of @@@ in .symver directives when
doing Link Time Optimization.
Reported by: Shawn Webb <shawn.webb@hardenedbsd.org>
MFC after: 3 months
X-MFC-With: r327952
6.0.0 (branches/release_60 r324090).
This introduces retpoline support, with the -mretpoline flag. The
upstream initial commit message (r323155 by Chandler Carruth) contains
quite a bit of explanation. Quoting:
Introduce the "retpoline" x86 mitigation technique for variant #2 of
the speculative execution vulnerabilities disclosed today,
specifically identified by CVE-2017-5715, "Branch Target Injection",
and is one of the two halves to Spectre.
Summary:
First, we need to explain the core of the vulnerability. Note that
this is a very incomplete description, please see the Project Zero
blog post for details:
https://googleprojectzero.blogspot.com/2018/01/reading-privileged-memory-with-side.html
The basis for branch target injection is to direct speculative
execution of the processor to some "gadget" of executable code by
poisoning the prediction of indirect branches with the address of
that gadget. The gadget in turn contains an operation that provides a
side channel for reading data. Most commonly, this will look like a
load of secret data followed by a branch on the loaded value and then
a load of some predictable cache line. The attacker then uses timing
of the processors cache to determine which direction the branch took
*in the speculative execution*, and in turn what one bit of the
loaded value was. Due to the nature of these timing side channels and
the branch predictor on Intel processors, this allows an attacker to
leak data only accessible to a privileged domain (like the kernel)
back into an unprivileged domain.
The goal is simple: avoid generating code which contains an indirect
branch that could have its prediction poisoned by an attacker. In
many cases, the compiler can simply use directed conditional branches
and a small search tree. LLVM already has support for lowering
switches in this way and the first step of this patch is to disable
jump-table lowering of switches and introduce a pass to rewrite
explicit indirectbr sequences into a switch over integers.
However, there is no fully general alternative to indirect calls. We
introduce a new construct we call a "retpoline" to implement indirect
calls in a non-speculatable way. It can be thought of loosely as a
trampoline for indirect calls which uses the RET instruction on x86.
Further, we arrange for a specific call->ret sequence which ensures
the processor predicts the return to go to a controlled, known
location. The retpoline then "smashes" the return address pushed onto
the stack by the call with the desired target of the original
indirect call. The result is a predicted return to the next
instruction after a call (which can be used to trap speculative
execution within an infinite loop) and an actual indirect branch to
an arbitrary address.
On 64-bit x86 ABIs, this is especially easily done in the compiler by
using a guaranteed scratch register to pass the target into this
device. For 32-bit ABIs there isn't a guaranteed scratch register
and so several different retpoline variants are introduced to use a
scratch register if one is available in the calling convention and to
otherwise use direct stack push/pop sequences to pass the target
address.
This "retpoline" mitigation is fully described in the following blog
post: https://support.google.com/faqs/answer/7625886
We also support a target feature that disables emission of the
retpoline thunk by the compiler to allow for custom thunks if users
want them. These are particularly useful in environments like
kernels that routinely do hot-patching on boot and want to hot-patch
their thunk to different code sequences. They can write this custom
thunk and use `-mretpoline-external-thunk` *in addition* to
`-mretpoline`. In this case, on x86-64 thu thunk names must be:
```
__llvm_external_retpoline_r11
```
or on 32-bit:
```
__llvm_external_retpoline_eax
__llvm_external_retpoline_ecx
__llvm_external_retpoline_edx
__llvm_external_retpoline_push
```
And the target of the retpoline is passed in the named register, or in
the case of the `push` suffix on the top of the stack via a `pushl`
instruction.
There is one other important source of indirect branches in x86 ELF
binaries: the PLT. These patches also include support for LLD to
generate PLT entries that perform a retpoline-style indirection.
The only other indirect branches remaining that we are aware of are
from precompiled runtimes (such as crt0.o and similar). The ones we
have found are not really attackable, and so we have not focused on
them here, but eventually these runtimes should also be replicated for
retpoline-ed configurations for completeness.
For kernels or other freestanding or fully static executables, the
compiler switch `-mretpoline` is sufficient to fully mitigate this
particular attack. For dynamic executables, you must compile *all*
libraries with `-mretpoline` and additionally link the dynamic
executable and all shared libraries with LLD and pass `-z
retpolineplt` (or use similar functionality from some other linker).
We strongly recommend also using `-z now` as non-lazy binding allows
the retpoline-mitigated PLT to be substantially smaller.
When manually apply similar transformations to `-mretpoline` to the
Linux kernel we observed very small performance hits to applications
running typic al workloads, and relatively minor hits (approximately
2%) even for extremely syscall-heavy applications. This is largely
due to the small number of indirect branches that occur in
performance sensitive paths of the kernel.
When using these patches on statically linked applications,
especially C++ applications, you should expect to see a much more
dramatic performance hit. For microbenchmarks that are switch,
indirect-, or virtual-call heavy we have seen overheads ranging from
10% to 50%.
However, real-world workloads exhibit substantially lower performance
impact. Notably, techniques such as PGO and ThinLTO dramatically
reduce the impact of hot indirect calls (by speculatively promoting
them to direct calls) and allow optimized search trees to be used to
lower switches. If you need to deploy these techniques in C++
applications, we *strongly* recommend that you ensure all hot call
targets are statically linked (avoiding PLT indirection) and use both
PGO and ThinLTO. Well tuned servers using all of these techniques saw
5% - 10% overhead from the use of retpoline.
We will add detailed documentation covering these components in
subsequent patches, but wanted to make the core functionality
available as soon as possible. Happy for more code review, but we'd
really like to get these patches landed and backported ASAP for
obvious reasons. We're planning to backport this to both 6.0 and 5.0
release streams and get a 5.0 release with just this cherry picked
ASAP for distros and vendors.
This patch is the work of a number of people over the past month:
Eric, Reid, Rui, and myself. I'm mailing it out as a single commit
due to the time sensitive nature of landing this and the need to
backport it. Huge thanks to everyone who helped out here, and
everyone at Intel who helped out in discussions about how to craft
this. Also, credit goes to Paul Turner (at Google, but not an LLVM
contributor) for much of the underlying retpoline design.
Reviewers: echristo, rnk, ruiu, craig.topper, DavidKreitzer
Subscribers: sanjoy, emaste, mcrosier, mgorny, mehdi_amini, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D41723
MFC after: 3 months
X-MFC-With: r327952
PR: 224669
[SLP] Fix PR35777: Incorrect handling of aggregate values.
Summary:
Fixes the bug with incorrect handling of InsertValue|InsertElement
instrucions in SLP vectorizer. Currently, we may use incorrect
ExtractElement instructions as the operands of the original
InsertValue|InsertElement instructions.
Reviewers: mkuper, hfinkel, RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41767
This should fix "Invalid InsertValueInst operands!" errors when building
certain parts of editors/libreoffice.
Reported by: jbeich
PR: 225086
the upstream release_50 branch. This corresponds to 5.0.0 rc4.
As of this version, the cad/stepcode port should now compile in a more
reasonable time on i386 (see bug 221836 for more information).
PR: 221836
MFC after: 2 months
X-MFC-with: r321369
the upstream release_50 branch.
As of this version, lib/msun's trig test should also work correctly
again (see bug 220989 for more information).
PR: 220989
MFC after: 2 months
X-MFC-with: r321369
Fix use-after-free bug in AffectedValueCallbackVH::allUsesReplacedWith
When transferring affected values in the cache from an old value,
identified by the value of the current callback, to the specified new
value we might need to insert a new entry into the DenseMap which
constitutes the cache. Doing so might delete the current callback
object. Move the copying logic into a new function, a member of the
assumption cache itself, so that we don't run into UB should the
callback handle itself be removed mid-copy.
Differential Revision: https://reviews.llvm.org/D28749
This should fix crashes when building lld (as part of the llvmXY ports).
Reported by: jbeich
PR: 216117
