Not only did these two drivers depend on IFF_NEEDSGIANT, they were
broken 7 months ago during the MPSAFE TTY import. if_ppp(4) has been
replaced by ppp(8). There is no replacement for if_sl(4).
If we see regressions in for example the ports tree, we should just use
__FreeBSD_version 800045 to check whether if_ppp(4) and if_sl(4) are
present. Version 800045 is used to denote the import of MPSAFE TTY.
Discussed with: rwatson, but also rwatson's IFF_NEEDSGIANT emails on the
lists.
driver in Linux 2.6. uscanner was just a simple wrapper around a fifo and
contained no logic, the default interface is now libusb (supported by sane).
Reviewed by: HPS
ports tree so that programs use libusb from the base by default. Thanks to
Stanislav Sedov for sorting out the ports build.
Bump __FreeBSD_version to 800069
Help and testing by: stas
The function pow() in libmp(3) clashes with pow(3) in libm. We could
rename this single function, but we can just take the same approach as
the Solaris folks did, which is to prefix all function names with mp_.
libmp(3) isn't really popular nowadays. I suspect not a single
application in ports depends on it. There's still a chance, so I've
increased the SHLIB_MAJOR and __FreeBSD_version.
Reviewed by: deischen, rdivacky
- Document the minor(3), major(3) and makedev(3) macro's. They also
apply to umajor() and uminor() in the kernel, but hopefully we'll sort
that out one day.
- Briefly dev2unit() inside the make_dev(9) manual page, since this is
now the preferred macro to obtain character device unit numbers inside
the kernel.
- Remove the device_ids(9) manual page. It contains highly inaccurate
information, such as a description of the nonexistent major().
years by the priv_check(9) interface and just very few places are left.
Note that compatibility stub with older FreeBSD version
(all above the 8 limit though) are left in order to reduce diffs against
old versions. It is responsibility of the maintainers for any module, if
they think it is the case, to axe out such cases.
This patch breaks KPI so __FreeBSD_version will be bumped into a later
commit.
This patch needs to be credited 50-50 with rwatson@ as he found time to
explain me how the priv_check() works in detail and to review patches.
Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
Reviewed by: rwatson
Before we had a posix_openpt() that allocated PTY's with proper
permissions in place, we used this set-uid utility to change the
ownership of PTY slave devices to the real user ID of the process. This
utility was used to implement grantpt().
In my first designs of the MPSAFE TTY layer, I replaced this by adding
an ioctl() called TIOCGRANTPT, which was used to change the ownership.
I left the pt_chown utility, because older C libraries needed it to work
properly.
After some discussions back in June I changed the PTY code to set
permissions properly upon creation. Fortunately the previous grantpt()
implementation changed permissions by hand when pt_chown is not
installed, which always succeeds. This means grantpt() still works
properly, even though the set-uid utility is missing.
I've done tests with FreeBSD 5.2.1, FreeBSD 6.3 and FreeBSD 7.0 jails.
All of them still work if I remove pt_chown.
Reviewed by: philip (ex-mentor)
The last half year I've been working on a replacement TTY layer for the
FreeBSD kernel. The new TTY layer was designed to improve the following:
- Improved driver model:
The old TTY layer has a driver model that is not abstract enough to
make it friendly to use. A good example is the output path, where the
device drivers directly access the output buffers. This means that an
in-kernel PPP implementation must always convert network buffers into
TTY buffers.
If a PPP implementation would be built on top of the new TTY layer
(still needs a hooks layer, though), it would allow the PPP
implementation to directly hand the data to the TTY driver.
- Improved hotplugging:
With the old TTY layer, it isn't entirely safe to destroy TTY's from
the system. This implementation has a two-step destructing design,
where the driver first abandons the TTY. After all threads have left
the TTY, the TTY layer calls a routine in the driver, which can be
used to free resources (unit numbers, etc).
The pts(4) driver also implements this feature, which means
posix_openpt() will now return PTY's that are created on the fly.
- Improved performance:
One of the major improvements is the per-TTY mutex, which is expected
to improve scalability when compared to the old Giant locking.
Another change is the unbuffered copying to userspace, which is both
used on TTY device nodes and PTY masters.
Upgrading should be quite straightforward. Unlike previous versions,
existing kernel configuration files do not need to be changed, except
when they reference device drivers that are listed in UPDATING.
Obtained from: //depot/projects/mpsafetty/...
Approved by: philip (ex-mentor)
Discussed: on the lists, at BSDCan, at the DevSummit
Sponsored by: Snow B.V., the Netherlands
dcons(4) fixed by: kan
When I turned sgtty into a binary-only interface (last month), I added
this explicit #error to the header file, to make sure nobody forgot to
remove the header file after updating world.
I think it is now a good moment to remove this header file.
Approved by: philip (mentor)
MPSAFE patches on current@ and stable@. This driver also has a fundamental
issue in that it sleeps when sending commands to the card including in the
if_init/if_start routines (which can be called from interrupt context). As
such, the driver shouldn't be working reliably even on 4.x.
current@ and stable@ for the locking patches. The driver can always be
revived if someone tests it.
This driver also sleeps in its if_init routine, so it likely doesn't really
work at all anyway in modern releases.
sgtty was the original interface to configure terminal attributes on my
UNIX-like operating systems. It has been deprecated by the POSIX termios
interface, which is implemented in almost any modern system.
An advantage of turning this into a binary compatibility interface, is
that we can now eventually remove the COMPAT_43TTY switch from kernel
configurations. This removes many ioctl()'s from the TTY layer.
While there, increase the __FreeBSD_version, which may be useful for the
people working on the Ports tree.
Reviewed by: kib
Approved by: philip (mentor)
parts relied on the now removed NET_NEEDS_GIANT.
Most of I4B has been disconnected from the build
since July 2007 in HEAD/RELENG_7.
This is what was removed:
- configuration in /etc/isdn
- examples
- man pages
- kernel configuration
- sys/i4b (drivers, layers, include files)
- user space tools
- i4b support from ppp
- further documentation
Discussed with: rwatson, re
sort the entry into it's correct place (behind 200407XX before
200406XX because we have an explicit date here).
PR: misc/122098
Submitted by: "John Hein" <jhein@timing.com>
MFC after: 3 days
with fortunes and fortunes2 2 years and 2 days ago. The fortunes2-o
file was brought in with the original import of the 4.4 Lite games
directory, but has always consisted in large part of fortunes
duplicated from other files.
The combined size of the two files is still only 631K, or less
than 1/3rd of the size of the fortunes file.
Combining them has the added benefit of making the fortunes from
fortunes2-o visibile to fortune(6)'s -m option.
This change should probably not be MFC'ed beyond RELENG_7.
libkse in FreeBSD 8.0, do not build or install static versions of libkse
(i.e. libkse*.a) in the default case. Static versions will be built and
installed if libthr is not built or if libkse is the default threading
library.
Discussed on: freebsd-arch
MFC after: 3 days
20071120 shared library version bump.
Update the date in the comments to match the date of the actual
commit.
Approved by: bz, erwin (mentor)
MFC after: 3 days
obsolete files.
Noticed by: Michael Plass <mfp49_freebsd at plass-family dot net>
Herbert J. Skuhra <h dot skuhra at gmail dot com>
Approved by: re (bmah)
Merge in parts of the old fast_ipsec.4 man page to ipsec.4 and
start updating ipsec.4 man page.
Reviewed by: brueffer, sam (slightly earlier versions), bmah
Approved by: re (bmah)
This commit includes only the kernel files, the rest of the files
will follow in a second commit.
Reviewed by: bz
Approved by: re
Supported by: Secure Computing
The wpa man pages were moved to section 8 in June 2005.
The clean_environment() function was removed from libutil in February
2004, so its man page is well overdue for removal.
MFC after: 3 days
- /lib/libpthread.so.2 was made obsolete by renaming libpthread to
libkse (!sparc64, 2007/05/13).
- /usr/lib/libthr.so.2 was made obsolete by moving the library to
/lib (!sparc64, 2007/05/13).
- /lib/libkse.so.2 existed for a few days before the version bump
for those who had libpthread as their default threading library.
Coding this "right" in ObsoleteFiles.inc is nearly impossible, so
just add the missing obsolete libraries to the version bump block.
Submitted by: deischen, ru
