ethernet controllers. This adds support for the 3Com 3c996-T, the
SysKonnect SK-9D21 and SK-9D41, and the built-in gigE NICs on
Dell PowerEdge 2550 servers. The latter configuration hauls ass:
preliminary measurements show TCP speeds of over 900Mbps using
only normal size frames.
TCP/IP checksum offload, jumbo frames and VLAN tag insertion/stripping
are supported, as well as interrupt moderation.
Still need to fix autonegotiation support for 1000baseSX NICs, but
beyond that, driver is pretty solid.
floppies if you try to actually use it. This code will work fine if
you build and use sysinstall on a running system, since you have the
benefit of an installed termcap file. However, this code does not
work on an MFSROOT, where you must set the TERMCAP environment
variable properly. Unfortunately the quick fix of setting the TERMCAP
variable doesn't seem to fix the problem either. olgeni will add this
functionality back once it's been fully implemented (hopefully using
the working code in termcap.c).
PR: bin/30739
Submitted by: Alexey V. Neyman <alex.neyman@auriga.ru>
Discussed with / Pointy hat to: olgeni
MFC after: 3 days
survive a sysinstall Ctrl-C -> 'Restart'. This fixes another annoying
bug where restarting sysinstall will try to reload kernel modules and
do other external things that have already been done. For now, use
these persistent variables to keep track of module, usbd, and pccardd
initialization.
Bug found by: rwatson
MFC after: 1 week
environment. This fixes an annoying bug where hitting Ctrl-C and
telling sysinstall to 'restart' will do no such thing since many of
the options are still set and so you won't be prompted for them
again.
MFC after: 1 week
variable to check for debug functionality. Previously, you had to set
both 'debug' and 'SYSINSTALL_DEBUG' to get a log of sysinstall's
activities. Now, only 'debug' is necessary.
for each option in the DHCP lease file. The DHCP lease parsing code
specifically ignores more than the first nameserver, but it didn't
previously deal with the case of more than one router. This caused
segfaults and a painful death when installing on a network with
multiple routers.
PR: misc/16003
interactive case. This already works for non-interactive installs,
but at least one user thinks it would be useful and it certainly seems
more correct to allow it here as well.
So, this will now work :
# sysinstall netDev=fxp0 tcpMenuSelect
PR: bin/30229
Submitted by: Mikhail Teterin <mi@aldan.algebra.com>
This will now allow sysinstall to work properly if a FreeBSD CD/DVD is
already mounted as /cdrom, instead of just crapping out when it tries
to mount as /dist and gets EBUSY.
PR: conf/28081
Tested by: jhb
useful for post install configuration or other cases that might not be
handled by usb.c. (usb.c already sets usbd_enable iff sysinstall
detects usb during install).
PR: bin/18946
Submitted by: Peter van Heusden <pvh@egenetics.com>
Reviewed by: jhb
and RTSOL in sysinstall. If the respective TRY_FOO variable is set to
"YES" then it will be tried without prompting the user.
However, if the TRY_FOO variable is set to "NO" then the user will not
be prompted for a choice. This is the correct behavior, since we want
people to be able to script sysinstall in either case.
However, the default TRY_FOO variable has been "NO" since 1999. This
is incorrect, and when the logic was corrected in tcpip.c this has the
effect of never giving the user a choice to use DHCP or IPv6. The
value should be undefined until it is set by a script or by the user.
Submitted by: Randy Pratt, Chern Lee, many others.
UPGRADE.TXT along with a YesNo dialog requesting confirmation of
the upgrade. During the transition to RELNOTESng, UPGRADE.TXT got
folded into a file that eventually renders as INSTALL.TXT, which
makes sysinstall complain about a non-existent file. As a
solution/workaround, point the user at INSTALL.TXT, and then request
confirmation.
Noticed by: rpratt (on 4.4-RC3)
Approved by: jkh
post-configuration "Startup" menu. In the event that diskcheckd is
removed, this can easily be trimmed also; in the mean time, it allows
diskcheckd to be easily disabled using our documented management
tool
the name for the moderate security profile is "moderate", not
"medium", so update this one reference to it as "medium".
This is a 4.4-RELEASE MFC candidate.
MFC after: 2 days
Add a timestamp to the comment so that it's possible to see when
changes were made.
e.g.:
# -- sysinstall generated deltas -- # Wed Aug 15 18:10:20 2001
conservative default, and actually prompt specifically for inetd rather
than handling it as a side effect of the security profile. Update the
help file to reflect this change.
o Rename "Fascist" to "Extreme" in the source code, to match the names
presented to the user.
o Remove portmap and inetd from profile management. Portmap is now
disabled by default, but automatically turned on if a feature requires
it (such as NFS, etc).
This is an MFC candidate for 4.4-RELEASE.
Reviewed by: freebsd-arch@FreeBSD.org
Approved by: re@FreeBSD.org
MFC after: 2 days
post-install config, reduce the potential confusion from the existence
of both configTTYs and configTtys by renaming configTTYs to
configEtcTtys. While this is not a C naming conflict, it was probably
a poor choice of names on my part.
