only covers about 3-4 lines.
- Don't lower the IPL while we are on the interrupt stack. Instead, save
the raised IPL and change the saved IPL in sched_lock to IPL_0 before
calling mi_switch(). When we are resumed, restore the saved IPL in
sched_lock to the saved raised IPL so that when we release sched_lock
we won't lower the IPL. Without this, we would get nested interrupts
that would overflow the kernel stack.
Tested by: mjacob
also try implement teh documented behaviour in socket nodes
so that when there is only one hook, an unaddressed write/send
will DTRT and send the data to that hook.
except for setting it. Also remove count from aha and replace it with
optional.
Also add commented out pccard lines for all the old card drivers.
They have to be commented out until they are converted because it
causes problems in NEWCARD.
There are two 3rd party code chunks using this still - the IPv6 stuff and
i4b. Give them a private copy as an alternative to changing them too much.
XXX sys/kernel.h still has a #include <sys/module.h> in it. I will be
taking this out shortly - this affects a number of drivers.
by myself. It solves a serious vm_map corruption problem that can occur
with the buffer cache when block sizes > 64K are used. This code has been
heavily tested in -stable but only tested somewhat on -current. An MFC
will occur in a few days. My additions include the vm_map_simplify_entry()
and minor buffer cache boundry case fix.
Make the buffer cache use a system map for buffer cache KVM rather then a
normal map.
Ensure that VM objects are not allocated for system maps. There were cases
where a buffer map could wind up with a backing VM object -- normally
harmless, but this could also result in the buffer cache blocking in places
where it assumes no blocking will occur, possibly resulting in corrupted
maps.
Fix a minor boundry case in the buffer cache size limit is reached that
could result in non-optimal code.
Add vm_map_simplify_entry() calls to prevent 'creeping proliferation'
of vm_map_entry's in the buffer cache's vm_map. Previously only a simple
linear optimization was made. (The buffer vm_map typically has only a
handful of vm_map_entry's. This stabilizes it at that level permanently).
PR: 20609
Submitted by: (Tor Egge) tegge
entry fits within its DIRBLKSIZ block. The surrounding code is
extremely fragile with respect to corruption of the directory entry
'd_reclen' field; if directory corruption occurs, it can blindly
scan forward beyond the end of the filesystem block. Usually this
results in a 'fault on nofault entry' panic.
Directory corruption is now much more likely to be detected, resulting
in a 'ufs_dirbad' panic. If the filesystem is read-only, it will
simply print a warning message, and skip the corrupted block.
Reviewed by: mckusick
in ufs_dirbad(). The mnt_stat.f_flags field is only updated by the
syscalls *statfs and getfsstat, so mnt_flag should be used instead.
This only affects whether or not a panic is generated on detection of
certain types of directory corruption.
Reviewed by: mckusick
turned on, and the case of it not being defined at all.
i.e. Disabling bridging re-enables some of the checks it disables.
Submitted by: "Rogier R. Mulhuijzen" <drwilco@drwilco.net>
in tunopen())
o Change the default device permissions to 0600 root:wheel
(were uucp:dialer)
o Only let root (suser()) change the MTU
This makes it possible for an administrator to open up the
permissions on /dev/tun*, letting non-root programs service
a tun interface. Co-operation is still required with a
priviledged program that will configure the interface side
of things.
* Optimise the return path for syscalls so that they only restore a minimal
set of registers instead of performing a full exception_return.
A new flag in the trapframe indicates that the frame only holds partial
state. When it is necessary to perform a full state restore (e.g. after an
execve or signal), the flag is cleared to force a full restore.
striped plexes. This prevents various panics introduced in the last
rewrite of the locking code.
Suffered by: "Niels Chr. Bank-Pedersen" <ncbp@bank-pedersen.dk>
- If possible, context switch to the thread directly in sched_ithd(),
rather than triggering a delayed ast reschedule.
- Disable interrupts while restoring fpu state in the trap handler,
in order to ensure that we are not preempted in the middle, which
could cause migration to another cpu.
Reviewed by: peter
Tested by: peter (alpha)
* Optimise the return path for syscalls so that they only restore a minimal
set of registers instead of performing a full exception_return.
A new flag in the trapframe indicates that the frame only holds partial
state. When it is necessary to perform a full state restore (e.g. after an
execve or signal), the flag is cleared to force a full restore.
Turn off semaphores. Nobody else implements them, and there is lots of
AML out there which does totally absurd things with them, meaning that
if we try to do the right thing we are guaranteed to fail.
Use acpi_EvaluateInteger where possible.
Use FuncName rather than &FuncName when passing function addresses.
Don't evaluate the _REG method when we attach to an address space -
AcpiInstallAddressSpaceHandler does it for us.
acpi_EvaluateInteger.
Use acpi_EvaluateInteger instead of doing things the hard way where
possible.
AcpiSetSystemSleepState (unofficial) becomes AcpiEnterSleepState.
Use the AcpiGbl_FADT pointer rather than searching for the FADT.
to 1GB. A box of mine is running with MAXDSIZ and DFLDSIZ increased
up to 1.5GB.
Wishlist: It would be nice to warn if MAXTSIZ + MAXDSIZ + MAXSSIZ
exceeds VM_MAXUSER_ADDRESS - VM_MINUSER_ADDRESS.
(e.g. ethernet nodes are persistent until you rip out the hardware)
Use this support in the ethernet and sample nodes.
Add some more abstraction on the 'item's so that node and
hook reference counting can be checked easier.
Slight man page correction.
Make pppoe type dependent on ethernet type.
Clean up node shutdown a little.
Move a mutex from MTX_SPIN to MTX_DEF (oops)
Fix small ref-counting bug.
remove warning on one2many type.
incompletely converting simplelocks to mutexes (COM_LOCK() is supposed
to hide the SMP locking internals, but it now depends on mutex interfaces
being visible).
filesystem softdep_process_worklist() is called in a loop until it indicates
that no dependancies remain, but the determination of that fact depends on
there only being one softdep_process_worklist() instance running. It was
possible for the syncer to also be running softdep_process_worklist()
and the pre-existing checks in the code to prevent this were not sufficient
to prevent the race. This patch solves the problem.
Approved-by: mckusick
- Add a note about the special locking semantics used for members such as
p_cred that are read by multiple processes but only written to by the
current process.
- Change p_upages_obj's locking key to note that it is created at fork
and left alone afterwards (the actual pointer, not what it points to.)
- Mark p_intr_nesting_level as being implicitly locked since only curproc
accesses it.
Reviewed by: jake
valid) if BPF is missing.
The netgraph_bpf node forced bpf to be present, reflect that in the
options.
Stop doing a 'count bpf' - we provide stubs.
Since a handful of drivers still refer to "bpf.h", provide a more accurate
indication that the API is present always. (eg: netinet6)
With this flag set malloc() will panic if memory allocation failed.
This usable only in critical places where failed allocation is fatal.
Reviewed by: peter
would *want* to is a different story, but it used to be able to be done
statically. Get rid of #include "loop.h" and struct ifnet loif[NLOOP];
This could be used as an example of how to do this in other drivers,
for example: ccd.
fsyncs, which typically occur during unmounting, will drain all dirty
buffers even if it takes multiple passes to do so. The guarentee was
mangled by the last patch which solved a problem due to -current disabling
interrupts while holding giant (which caused an infinite spin loop waiting for
I/O to complete). -stable does not have either patch, but has a similar
bug in the original spec_fsync() code which is triggered by a bug in the
softupdates umount code, a fix for which will be committed to -current
as soon as Kirk stamps it. Then both solutions will be MFC'd to -stable.
-stable currently suffers from a combination of the softupdates bug and
a small window of opportunity in the original spec_fsync() code, and -stable
also suffers from the spin-loop bug but since interrupts are enabled the
spin resolves itself in a few milliseconds.
folks.
My guess is that reducing the number of tags is just masking the real
problem for the PR submitter. I'll re-open the PR and see if I can work
with the submitter to diagnose the problem.
PR: 21139
machines (duh!). This was one reason why this script broke on
i386. The other being that on i386 sections did not have the
proper alignment. This has been fixed in sys/sys/linker_set.h.
declarations will not be aligned by default.
o Remove the alignment work-around for alpha. Our current alpha
as(1) does not assume alignment after section switching, nor
does the ia64 as(1).
- When used on a 33MHz PCI BUS, the 53C1010-66 revision 0
requires extra clocks to be inserted in data out phase.
Revision 1 is fixed.
- The 53C1010-33 revision 1 requires internal cycles to be
disabled due to possible contentions on IO registers.
Revision 2 is fixed.
Fix:
- The probing of HVD from GPIO3 bit by the driver was reversed.
The driver could misprobe the bus mode of a 825 or 875 chip
that was not previously initialized (no BIOS for example).
The new method is 'flood' (in addition to the old round-robin)
in which incoming packets are sent to more than one outgoing hook.
(I'm not sure what Rogier is using this for but it seems generally useful
and isn't much extra)
Submitted by: Rogier R. Mulhuijzen (drwilco@drwilco.net )
o Use objdump instead of gensetdefs(1) to build the linker sets.
o Allow overriding of nm and objdump in resp. genassym.sh and
gensetdefs.pl for non-native toolchains.
Reviewed by: arch
Perl improvements: Jos Backus <josb@cncdsl.com>, benno
problem is that a mutex lock, prior to this change, is acquired before
the curproc is set to idleproc, so we mess ourselves up by calling
the mutex lock routine with curproc == NULL.
Moving it up after the aps_ready spin-wait has us hopefully setting it
after idleproc is setup.
Solved by: jake (the allmighty) :-)
Move the helper macros from sbuf.h to sbuf.c
Use ints instead of size_ts.
Relax the requirements for sbuf_finish(): it is now possible to finish an
overflowed buffer.
Make sbuf_len() return -1 instead of 0 if the sbuf overflowed.
Requested by: gibbs
while strlcpy() existed, before it got backed out due to an extended
bikeshed argument. Sigh. Back to the old version with the redundant
code to terminate the string. :-(
is going away soon anyways. Instead, don't pass MTX_RECURSE to mtx_init,
so that WITNESS will panic if the driver mutex is recursed on.
- Use MTX_DEF in mtx_init() instead of assuming that it will be 0.
even if mode PS/2 is forced with bootflags. As a matter of fact,
chipsets needs some extra configuration for accessing PS/2 mode
from ECP. The current patch is only relevant for generic chipsets
since specific code is supposed to deal with this during detection.
instead of a trapframe directly. (Requested by bde.)
- Convert the alpha switch_trampoline to call fork_exit() and use the MI
fork_return() instead of child_return().
- Axe child_return().
