mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-20 11:11:24 +00:00
Code Issues Releases Activity
51,334 Commits 339 Branches 3,553 Tags 2.1 GiB
7c438dbe9c
Commit Graph

252 Commits

Author SHA1 Message Date
Cameron Grant
7c438dbe9c add devfs support. when devfs is enabled, sysctl hw.sndunit is used to set 
which sound unit the /dev/{dsp,mixer,dspW,audio} links point at.  this can
also be set from the loader.
 2000-08-29 16:21:33 +00:00
Cameron Grant
dacda62ff2 add driver for forte-media fm801 
PR:             conf/20698
Submitted by:   dimmy the wild <diwil@dataart.com>
 2000-08-29 16:12:28 +00:00
Doug Rabson
e6171135a7 Fix disordered arguments to bus_space_barrier(). 2000-08-28 21:02:18 +00:00
Cameron Grant
513693be6c rework feeder sytem to allow feeders in klds 
modify driver capability reporting format to list every audio format
seperately- required for above and because we could not previously indicate
that mono was unsupported.

there should be no functional impact.
 2000-08-20 22:18:56 +00:00
Cameron Grant
fa06efc7e6 fix SNDCTL_DSP_GETODELAY 
PR:		kern/20340
Submitted by:	Takashi SHIRAI <shirai@nintendo.co.jp>
 2000-08-19 18:29:46 +00:00
Cameron Grant
4e77c04865 don't complain about bad irqs if using a shared irq 2000-08-19 18:22:20 +00:00
Cameron Grant
becc0678b7 Recognize ESS 1888 in Dell Latitude XPi 
PR:		kern/18714
Submitted by:	Sean O'Connell <sean@stat.Duke.EDU>
 2000-08-19 18:17:15 +00:00
Nick Sayer
6ba60b3c4a This patch appears to solve the problems with recording resulting 
in bogus hwptr warnings. Further comments sought on -hackers
were not forthcoming. I can only hope that calling DELAY() like
this doesn't cause any heartburn.
 2000-08-13 19:20:02 +00:00
Nick Sayer
fc35953a16 Missed a step when activating the solo driver. 2000-08-09 20:28:19 +00:00
Cameron Grant
4873b46dc7 change irq handling slightly 
add another non-ac97 256av
 2000-08-09 18:51:27 +00:00
Cameron Grant
071280d442 MFS: module macro changes 2000-08-09 18:46:48 +00:00
Nick Sayer
0edeb3dc90 A couple of cosmetic fixes, plus a biggie: When checking the DMA 
position, channel 1's dma position register must be quiescent. So
the driver will spl, pause the DMA, delay a bit and hold as still as
possible while snapping the picture.

I'm sure there HAS to be a better way to do this, but if there is, it's
not documented.

So far as I can tell, this fixes recording, which means the Solo is open
for business.
 2000-08-09 07:14:56 +00:00
Cameron Grant
1874ec255c MFS: sync with peter's isadma fixup 2000-08-09 01:22:09 +00:00
Cameron Grant
ba90ebe703 activate via82c686 audio driver 2000-08-09 01:08:59 +00:00
Cameron Grant
fb9f118e6f new driver: via 82c686 chipset audio 
not personally tested, but i'm assured it works

Submitted by:	David Jones <dej@ox.org>
PR:		kern/20161
 2000-08-09 00:55:55 +00:00
Cameron Grant
5fd7b0878e warn if hwptr goes backwards 2000-08-09 00:42:00 +00:00
Cameron Grant
6c1146c0b8 fix the staticy sound issue 
use timer instead of per-channel interrupts

do playback like the linux driver - may fix nmi-with-ecc issue
 2000-08-06 18:10:05 +00:00
Nick Sayer
05a1fdb459 Simplex devices will always report EBUSY on 2nd (and subsequent) 
opens if the reference count is not decremented on close.

Note that this may result in the reference count being corrupted
on full duplex devices (due to mismatching opens/closes), but the
code doesn't use the reference count for anything on full duplex
devices.
 2000-08-02 22:47:44 +00:00
Nick Sayer
3ac1ca3363 1. Increase the size of the DMA buffer. 
2. Offer half duplex with both playback and record on channel 1 or
full duplex with playback always on channel 2 as a compile-time option.

3. 16 bit record output is byte swapped for some dumb reason. Report the _BE
AFMTs for recording.
 2000-08-02 22:45:57 +00:00
Nick Sayer
a7e1150660 Undo some of my own damage. With this patch, it appears that both 
recording and playback now work correctly.
 2000-08-02 19:37:43 +00:00
Nick Sayer
bb7f26c3d9 Fix channel 1 playback the rest of the way. There are a couple of 
hiccups, but playback now proceeds mostly normally using both channel 1
and 2.
 2000-08-02 15:09:39 +00:00
Nick Sayer
19a0702e86 Get playback on channel 1 closer to working. 8 bit samples work. 
16 bit samples have some sort of choppiness, the nature of which
is not completely clear, but it clearly has something to do with
dma buffer synchronization. But at least channel 1 makes noise now.
 2000-08-02 08:01:00 +00:00
Nick Sayer
8eb3acc9be Fix channel 1, sort of. recording now generates IRQs and the output 
appears to be the correct length, but quality of output has not yet
been tested. Also, full duplex audio (that is, playback on channel 1)
does not yet work. Two constants and I am there!

Obtained from:	major hints from ALSA
 2000-08-02 06:36:55 +00:00
Nick Sayer
80a8e065eb Reverse the sense of the signed/unsigned formatting bit. 
This dramatically cleans up playback quality, at least with mxaudio.
 2000-08-01 04:18:15 +00:00
Cameron Grant
fd1aaeccce almost-there ess solo-1 driver, committed so people can tell me why it 
doesn't generate irqs.
 2000-07-31 16:17:40 +00:00
Cameron Grant
5151584d21 add suspend/resume for yamaha chips 
Submitted by:	Ira L Cooper <ira@MIT.EDU>
 2000-07-30 21:15:35 +00:00
Cameron Grant
1c60ef3f3c fix a potential local DoS attack 2000-07-30 19:38:26 +00:00
Cameron Grant
e04387c95a fix a bug where opening /dev/dsp twice resulted in it being busy until reboot 2000-07-30 19:36:13 +00:00
Cameron Grant
3c1b957d66 do the ac97 init delay for all chips and increase it to 500ms 2000-07-30 02:33:37 +00:00
Cameron Grant
d98c7b9a99 make this file suitable for 4-stable as well as 5-current 2000-07-18 21:23:48 +00:00
Richard Seaman Jr.
307754cbe2 PR:19945 
Reviewed by:tanimura
Fix boot panic introduced by newmidi code.
 2000-07-18 20:18:16 +00:00
Seigo Tanimura
fb0ef52838 Finally merge newmidi. 
(I had been busy for my own research activity until the last weekend)

Supported devices:

SB Midi Port			(sbc + midi)
SB OPL3				(sbc + midi)
16550 UART			(midi, needs a trick in your hint)
CS461x Midi Port		(csa + midi)

OSS-compatible sequencer	(seq)

Supported playing software:

playmidi			(We definitely need more)

Notes:

/dev/midistat now reports installed midi drivers. /dev/sndstat reports
only pcm drivers. We need the new name(pcmstat?).

EMU8000(SB AWE) does not sound yet but does get probed so that the OPL3
synth on an AWE card works.

TODO:

MSS/PCI bridge drivers
Midi-tty interface to support general serial devices
Modules
 2000-07-11 11:49:33 +00:00
Cameron Grant
e71eb9c328 do-nothing module that depends on all sound drivers 2000-07-03 21:00:44 +00:00
Cameron Grant
f314f3dad2 add module metadata. this is a hack, sound drivers will eventually present a 
bus to which pcm, mixer, etc will attach.
 2000-07-03 20:52:27 +00:00
Ollivier Robert
c790e2240e This is the patch to make my soundcard, a Creative Ensoniq AudioPCI (an 
es1371 chip, device id 0x58801274 rev 0x02).

Submitted by:	Kenneth Wayne Culver <culverk@wam.umd.edu>
 2000-07-02 14:17:41 +00:00
Cameron Grant
946e608646 add record channel irq timeouts too 2000-06-20 23:42:08 +00:00
Cameron Grant
e4d5b2502d fix a bug where opening for write would not fail if channel allocation failed 
when playing, if we stall for 1s with no data advancing, abort and mark the
channel dead - fail all future operations
 2000-06-20 23:27:12 +00:00
Cameron Grant
03cab0581f make mixer reads return the value written instead of the value set 
people seem to want this even though it breaks oss spec compliance
 2000-06-19 20:31:58 +00:00
Cameron Grant
fa5e422d98 replace a line erroneously removed in 1.28, should fix xmms 
make buf_clear handle unaligned lengths
 2000-06-17 19:29:40 +00:00
Cameron Grant
70776a9c0b add alpha-quality recording code and handle pci error interrupts - this may 
prevent the card generating an nmi on ecc systems.  for now a message is
printed on every pci error and it seems every time we start playng we get one
 2000-06-13 23:24:40 +00:00
Cameron Grant
20a874f116 handle closing differently - should fix the end-of-sample cutoff bug 2000-06-13 23:18:43 +00:00
Brian Somers
a54185c7ba Add (another) PnP entry for the ESS ES1869 (Compaq OEM) 
Submitted by:	mdharnois@home.com
PR:		19206
 2000-06-12 09:09:37 +00:00
Peter Wemm
a99bef94ed Untangle some #include between gusc.c/mss.c - gusc.c could create 
an attachment node for something that may not have been compiled in.
 2000-06-10 07:20:54 +00:00
Peter Wemm
cb73359d42 Unused include: #include "sbc.h" 2000-06-10 07:17:29 +00:00
Peter Wemm
83fc8b6d34 Unused includes: #include "pci.h", #include "pcm.h" 2000-06-10 07:15:15 +00:00
Dan Moschuk
7bf9834a55 Increase delay from 10mu to 1000mu when reading play control size. This 
allows the YMF744 to initialize properly.
 2000-06-09 16:44:30 +00:00
Cameron Grant
1a50bd2e37 handle duplex properly in the AIOGCAP ioctl - this may (partially?) fix rat 2000-06-07 11:51:30 +00:00
Cameron Grant
2f9aa04e7f this driver does not support the cs4281 and probably never will, different code 
will be required
 2000-06-06 22:42:57 +00:00
Cameron Grant
dafad92c7d support recording 2000-06-06 22:34:09 +00:00
Cameron Grant
20cdda004b improve recording 2000-06-06 22:30:22 +00:00