1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-20 11:11:24 +00:00
Commit Graph

17 Commits

Author SHA1 Message Date
Poul-Henning Kamp
c92a064d21 Reinstate AUTO_EOI_1. This did break suspend/resume on some portables.
In particular mine.  We may want to make it a negative option to
keep GENERIC sane, ie NO_AUTO_EOI_1.
1996-01-19 23:38:07 +00:00
Mark Murray
0738b16169 random_machdep.c: New version, also includes revectored interrupts, rather
than hooking permanently.
vector.s:       : Remove the interrupt hook. This is done dynamically, now.
1995-12-27 11:22:05 +00:00
David Greenman
e8636c6c19 Made "AUTO_EOI_1" standard. auto-EOI on the master ICU is a documented
feature of the ICU. auto-EOI on the slave is not safe, however, so it
remains an option. Killed religious FASTER_NOP when writing the ICU.

Reviewed by:	bde
1995-12-23 16:53:57 +00:00
Mark Murray
96441a8c38 Remove the #ifdev DEVRANDOM's, as promised.
/dev/random is now a part of the kernel! you will need to make
the device in /dev: sh MAKEDEV random
and take a look at some test code in src/tools/test/random.
1995-11-04 16:00:56 +00:00
Mark Murray
1bb2d3142b Theodore Ts'po's random number gernerator for Linux, ported by me.
This code will only be included in your kernel if you have
'options DEVRANDOM', but that will fall away in a couple of days.
Obtained from: Theodore Ts'o, Linux
1995-10-28 16:58:05 +00:00
Bruce Evans
7897b3ce69 Don't waste time sending an EOI to ICU1 if option AUTO_EOI_1 is defined.
Previously, this worked right if both AUTO_EOI_1 and AUTO_EOI_2 are
defined, but not if AUTO_EOI_1 is defined and AUTO_EOI_2 is not defined.
The latter case should be the default.  DUMMY_NOPS should be the default
too.  Currently there are only two NOPs slowing down rtcin() (although
there are no delays in writertc()) and several FASTER_NOPs slowing down
interrupt handling in vector.s.

Fix stack offsets for the (previously) unused untested
FAST_INTR_HANDLER_USES_ES case.
1995-04-15 21:32:18 +00:00
Bruce Evans
b39b673d37 i386/exception.s,
Keep track of interrupt nesting level.  It is normally 0
	for syscalls and traps, but is fudged to 1 for their exit
	processing in case they metamorphose into an interrupt
	handler.

i386/genassym.c;
	Remove support for the obsolete pcb_iml and pcb_cmap2.

	Add support for pcb_inl.

i386/swtch.s:
	Fudge the interrupt nesting level across context switches and in
	the idle loop so that the work for preemptive context switches
	gets counted as interrupt time, the work for voluntary context
	switches gets counted mostly as system time (the part when
	curproc == 0 gets counted as interrupt time), and only truly idle
	time gets counted as idle time.

	Remove obsolete support (commented out and otherwise) for pcb_iml.

	Load curpcb just before curproc instead of just after so that
	curpcb is always valid if curproc is.  A few more changes like
	this may fix tracing through context switches.

	Remove obsolete function swtch_to_inactive().

include/cpu.h:
	Use the new interrupt nesting level variable to implement a
	non-fake CLF_INTR() so that accounting for the interrupt state
	works.

	You can use top, iostat or (best) an up to date systat to see
	interrupt overheads.  I see the expected huge interrupt overheads
	for ISA devices (on a 486DX/33, about 55% for an IDE drive
	transferring 1250K/sec and the same for a WD8013EBT network card
	transferring 1100K/sec).  The huge interrupt overheads for serial
	devices are unfortunately normally invisible.

include/pcb.h:
	Remove the obsolete pcb_iml and pcb_cmap2.  Replace them by
	padding to preserve binary compatibility.

	Use part of the new padding for pcb_inl.

isa/icu.s:
isa/vector.s:
	Keep track of interrupt nesting level.
1994-12-03 10:03:19 +00:00
Bruce Evans
f23c6e08df Fix a very old, very stupid race clearing the mask bit for the current
interrupt.  Other bits in imen and icu+1 are volatile.

INTREN() and INTRDIS() in icu.h need to be changed similarly.

Change #include's to 2.0 style.
1994-11-01 23:29:50 +00:00
Bruce Evans
38a03467df Don't supply the `usermode' arg to softclock(). The 2.0 softclock() doesn't
take an arg.
1994-09-20 21:35:49 +00:00
David Greenman
8912c0ed61 Bruce Evans' dynamic interrupt support.
/usr/src/sys/i386/isa/clock.c:
	o Garrett's statclock changes.
	o Wire xxxintr, not Vclk.
	o Wire using register_intr(), not setidt().

/usr/src/sys/i386/isa/icu.s:
	o Garrett's statclock changes.
	o Removed unused variable high_imask.
	o Fake int 8 for rtc as well as int 0 for clk.  Required for kernel
	  profiling with statclock, harmless otherwise.

/usr/src/sys/i386/isa/isa.c:
	o Allow isdp->id_irq and other things in *isdp to be changed by
	  probes.  Changing interrupts later requires direct calls to
	  register_intr() and unregister_intr() and more care.
	  ALLOW_CONFLICT_* is brought over from 1.1.5, except
	  ALLOW_CONFLICT_IRQ is not supported.  IRQ conflict checking is
	  delayed until after probing so that drivers can change the IRQ
	  to a free one; real conflicts require more cooperation between
	  drivers to handle.
	o Too many details to list.
	o This file requires splitting and a lot more work.

/usr/src/sys/i386/isa/isa_device.h:
	o Declare more things more completely.

/usr/src/sys/i386/isa/sio.c:
	o Prepare to register interrupt handlers as fast.

/usr/src/sys/i386/isa/vector.s:
	o Generate entry code for 16 fast interrupt handlers and 16 normal
	  interrupt handlers.  Changed some constants to variables:
	  # $unit is now intr_unit[intr].  Type is int.  Someday it should
	    be a cookie suitable for the handler (e.g., a struct com_s for
	    sio).
	  # $handler is now intr_handler[intr].
	  # intrcnt_actv[id_num] is now *intr_countp[intr].  The indirection
	    is required to get a contiguous range of counters for vmstat
	    and so that the drivers depend more in the driver than on the
	    interrupt number (drivers could take turns using an interrupt
	    and the counts would remain correct).  There is a separate
	    counter for each device and for each stray interrupt.  In
	    1.1.5, stray interrupt 7 clobbers the count for device 7 or
	    something worse if there is no device 7 :-(.
	  # mask is now intr_mask[intr] (was already indirect).
	 o Entry points are now _XintrI and _XfastintrI (I = intr = 0-15),
	   not _VdevU (U = unit).
	 o Removed BUILD_VECTORS stuff.  There's a trace of it left for
	   the string table for vmstat but config now generates the
	   string in one piece because nothing more is required.
	 o Removed old handling of stray interrupts and older comments
	   about it.

Submitted by:	 Bruce Evans
1994-08-18 05:09:36 +00:00
David Greenman
d230622648 New interrupt code from Bruce Evans. In additional to Bruce's attached
list of changes, I've made the following additional changes:

1) i386/include/ipl.h renamed to spl.h as the name conflicts with the
   file of the same name in i386/isa/ipl.h.
2) changed all use of *mask (i.e. netmask, biomask, ttymask, etc) to
   *_imask (net_imask, etc).
3) changed vestige of splnet use in if_is to splimp.
4) got rid of "impmask" completely (Bruce had gotten rid of netmask),
   and are now using net_imask instead.
5) dozens of minor cruft to glue in Bruce's changes.

   These require changes I made to config(8) as well, and thus it must
be rebuilt.

-DG

from Bruce Evans:

sio:
	o No diff is supplied.  Remove the define of setsofttty().  I hope
	  that is enough.

*.s:
	o i386/isa/debug.h no longer exists.  The event counters became too
	  much trouble to maintain.  All function call entry and exception
	  entry counters can be recovered by using profiling kernel (the new
	  profiling supports all entry points; however, it is too slow to
	  leave enabled all the time; it also).  Only BDBTRAP() from debug.h
	  is now used.  That is moved to exception.s.  It might be worth
	  preserving SHOW_BITS() and calling it from _mcount() (if enabled).
	o T_ASTFLT is now only set just before calling trap().
	o All exception handlers set SWI_AST_MASK in cpl as soon as possible
	  after entry and arrange for _doreti to restore it atomically with
	  exiting.  It is not possible to set it atomically with entering
	  the kernel, so it must be checked against the user mode bits in
	  the trap frame before committing to using it.  There is no place
	  to store the old value of cpl for syscalls or traps, so there are
	  some complications restoring it.

Profiling stuff (mostly in *.s):
	o Changes to kern/subr_mcount.c, gcc and gprof are not supplied yet.
	o All interesting labels `foo' are renamed `_foo' and all
	  uninteresting labels `_bar' are renamed `bar'.  A small change
	  to gprof allows ignoring labels not starting with underscores.
	o MCOUNT_LABEL() is to provide names for counters for times spent
	  in exception handlers.
	o FAKE_MCOUNT() is a version of MCOUNT() suitable for exception
	  handlers.  Its arg is the pc where the exception occurred.  The
	  new mcount() pretends that this was a call from that pc to a
	  suitable MCOUNT_LABEL().
	o MEXITCOUNT is to turn off any timer started by MCOUNT().

/usr/src/sys/i386/i386/exception.s:
	o The non-BDB BPTTRAP() macros were doing a sti even when interrupts
	  were disabled when the trap occurred.  The sti (fixed) sti is
	  actually a no-op unless you have my changes to machdep.c that make
	  the debugger trap gates interrupt gates, but fixing that would
	  make the ifdefs messier.  ddb seems to be unharmed by both
	  interrupts always disabled and always enabled (I had the branch in
	  the fix back to front for some time :-().
	o There is no known pushal bug.
	o tf_err can be left as garbage for syscalls.

/usr/src/sys/i386/i386/locore.s:
	o Fix and update BDE_DEBUGGER support.
	o ENTRY(btext) before initialization was dangerous.
	o Warm boot shot was longer than intended.

/usr/src/sys/i386/i386/machdep.c:
	o DON'T APPLY ALL OF THIS DIFF.  It's what I'm using, but may require
	  other changes.
	  Use the following:
		o Remove aston() and setsoftclock().
	  Maybe use the following:
		o No netisr.h.
		o Spelling fix.
		o Delay to read the Rebooting message.
		o Fix for vm system unmapping a reduced area of memory
		  after bounds_check_with_label() reduces the size of
		  a physical i/o for a partition boundary.  A similar
		  fix is required in kern_physio.c.
		o Correct use of __CONCAT.  It never worked here for non-
		  ANSI cpp's.  Is it time to drop support for non-ANSI?
		o gdt_segs init.  0xffffffffUL is bogus because ssd_limit
		  is not 32 bits.  The replacement may have the same
		  value :-), but is more natural.
		o physmem was one page too low.  Confusing variable names.
	  Don't use the following:
		o Better numbers of buffers.  Each 8K page requires up to
		  16 buffer headers.  On my system, this results in 5576
		  buffers containing [up to] 2854912 bytes of memory.
		  The usual allocation of about 384 buffers only holds
		  192K of disk if you use it on an fs with a block size
		  of 512.
		o gdt changes for bdb.
		o *TGT -> *IDT changes for bdb.
		o #ifdefed changes for bdb.

/usr/src/sys/i386/i386/microtime.s:
	o Use the correct asm macros.  I think asm.h was copied from Mach
	  just for microtime and isn't used now.  It certainly doesn't
	  belong in <sys>.  Various macros are also duplicated in
	  sys/i386/boot.h and libc/i386/*.h.
	o Don't switch to and from the IRR; it is guaranteed to be selected
	  (default after ICU init and explicitly selected in isa.c too, and
	  never changed until the old microtime clobbered it).

/usr/src/sys/i386/i386/support.s:
	o Non-essential changes (none related to spls or profiling).
	o Removed slow loads of %gs again.  The LDT support may require
	  not relying on %gs, but loading it is not the way to fix it!
	  Some places (copyin ...) forgot to load it.  Loading it clobbers
	  the user %gs.  trap() still loads it after certain types of
	  faults so that fuword() etc can rely on it without loading it
	  explicitly.  Exception handlers don't restore it.  If we want
	  to preserve the user %gs, then the fastest method is to not
	  touch it except for context switches.  Comparing with
	  VM_MAXUSER_ADDRESS and branching takes only 2 or 4 cycles on
	  a 486, while loading %gs takes 9 cycles and using it takes
	  another.
	o Fixed a signed branch to unsigned.

/usr/src/sys/i386/i386/swtch.s:
	o Move spl0() outside of idle loop.
	o Remove cli/sti from idle loop.  sw1 does a cli, and in the
	  unlikely event of an interrupt occurring and whichqs becoming
	  zero, sw1 will just jump back to _idle.
	o There's no spl0() function in asm any more, so use splz().
	o swtch() doesn't need to be superaligned, at least with the
	  new mcounting.
	o Fixed a signed branch to unsigned.
	o Removed astoff().

/usr/src/sys/i386/i386/trap.c:
	o The decentralized extern decls were inconsistent, of course.
	o Fixed typo MATH_EMULTATE in comments. */
	o Removed unused variables.
	o Old netmask is now impmask; print it instead.  Perhaps we
	  should print some of the new masks.
	o BTW, trap() should not print anything for normal debugger
	  traps.

/usr/src/sys/i386/include/asmacros.h:
	o DON'T APPLY ALL OF THIS DIFF.  Just use some of the null macros
	  as necessary.

/usr/src/sys/i386/include/cpu.h:
	o CLKF_BASEPRI() changes since cpl == SWI_AST_MASK is now normal
	  while the kernel is running.
	o Don't use var++ to set boolean variables.  It fails after a mere
	  4G times :-) and is slower than storing a constant on [3-4]86s.

/usr/src/sys/i386/include/cpufunc.h:
	o DON'T APPLY ALL OF THIS DIFF.  You need mainly the include of
	  <machine/ipl.h>.  Unfortunately, <machine/ipl.h> is needed by
	  almost everything for the inlines.

/usr/src/sys/i386/include/ipl.h:
	o New file.  Defines spl inlines and SWI macros and declares most
	  variables related to hard and soft interrupt masks.

/usr/src/sys/i386/isa/icu.h:
	o Moved definitions to <machine/ipl.h>

/usr/src/sys/i386/isa/icu.s:
	o Software interrupts (SWIs) and delayed hardware interrupts (HWIs)
	  are now handled uniformally, and dispatching them from splx() is
	  more like dispatching them from _doreti.  The dispatcher is
	  essentially *(handler[ffs(ipending & ~cpl)]().
	o More care (not quite enough) is taken to avoid unbounded nesting
	  of interrupts.
	o The interface to softclock() is changed so that a trap frame is
	  not required.
	o Fast interrupt handlers are now handled more uniformally.
	  Configuration is still too early (new handlers would require
	  bits in <machine/ipl.h> and functions to vector.s).
	o splnnn() and splx() are no longer here; they are inline functions
	  (could be macros for other compilers).  splz() is the nontrivial
	  part of the old splx().

/usr/src/sys/i386/isa/ipl.h
	o New file.  Supposed to have only bus-dependent stuff.  Perhaps
	  the h/w masks should be declared here.

/usr/src/sys/i386/isa/isa.c:
	o DON'T APPLY ALL OF THIS DIFF.  You need only things involving
	  *mask and *MASK and comments about them.  netmask is now a pure
	  software mask.  It works like the softclock mask.

/usr/src/sys/i386/isa/vector.s:
	o Reorganize AUTO_EOI* macros.
	o Option FAST_INTR_HANDLER_USERS_ES for people who don't trust
	  fastintr handlers.
	o fastintr handlers need to metamorphose into ordinary interrupt
	  handlers if their SWI bit has become set.  Previously, sio had
	  unintended latency for handling output completions and input
	  of SLIP framing characters because this was not done.

/usr/src/sys/net/netisr.h:
	o The machine-dependent stuff is now imported from <machine/ipl.h>.

/usr/src/sys/sys/systm.h
	o DON'T APPLY ALL OF THIS DIFF.  You need mainly the different
	  splx() prototype.  The spl*() prototypes are duplicated as
	  inlines in <machine/ipl.h> but they need to be duplicated here
	  in case there are no inlines.  I sent systm.h and cpufunc.h
	  to Garrett.  We agree that spl0 should be replaced by splnone
	  and not the other way around like I've done.

/usr/src/sys/kern/kern_clock.c
	o splsoftclock() now lowers cpl so the direct call to softclock()
	  works as intended.
	o softclock() interface changed to avoid passing the whole frame
	  (some machines may need another change for profile_tick()).
	o profiling renamed _profiling to avoid ANSI namespace pollution.
	  (I had to improve the mcount() interface and may as well fix it.)
	  The GUPROF variant doesn't actually reference profiling here,
	  but the 'U' in GUPROF should mean to select the microtimer
	  mcount() and not change the interface.
1994-04-02 07:00:53 +00:00
Andrey A. Chernov
154f487097 Correct Vresume size, we have now 32 bits for it. 1994-01-10 23:15:09 +00:00
Garrett Wollman
a1f4319f4a Document use of counters 29 and 30 for CCITT netisrs. 1993-12-20 15:08:33 +00:00
Rodney W. Grimes
6f78ca6026 Removed all patch kit headers, sccsid and rcsid strings, put $Id$ in, some
minor cleanup.  Added $Id$ to files that did not have any version info, etc
1993-10-16 13:48:52 +00:00
Rodney W. Grimes
2a5017c0e0 Removed patch kit header, added $Id$
Added support of DONET({IMP,NS,ISO}) so you can now compile with options
NS and ISO, still missing some IMP code, but since the imp is old and
gone I doubt this will ever be used.
1993-09-06 16:12:05 +00:00
Rodney W. Grimes
1ce6e34045 Moved _eintr{names,cnt} so that vmstat -i does not report all the debugging
stuff of the fast interrupt code.
1993-08-09 18:20:26 +00:00
Rodney W. Grimes
5b81b6b301 Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00