This version supports both the keyserv v1 and v2 protocols. It uses the
new AF_LOCAL transport so that only local processes can use it for
storing/retrieving keys, and it uses the SCM_CREDS kernel hack for
authentication. With these two modifications, we don't need the keyenvoy
program normally used with RPC 4.0.
Note that if libdes.so.3.x is present on the system when keyserv
is started, Secure RPC will run with normal DES encryption. If not,
everything falls back to RC4 with a 40 bit key.
alias commands simply won't work. Only root may specify the
location of the alias lib (otherwise, it's hard-coded).
Make logprintf silently fail if LogOpen hasn't been called.
Suggested by: eivind
The standard SunOS ypbind(8) (and, until now, the FreeBSD ypbind)
only selects servers based on whether or not they respond to clnt_broadcast().
Ypbind(8) broadcasts to the YPPROC_DOMAIN_NONACK procedure and waits
for answers; whichever server answers first is the one ypbind uses
for the local client binding.
This mechanism fails when binding across subnets is desired. In order
for a client on one subnet to bind to a server on another subnet, the
gateway(s) between the client and server must be configured to forward
broadcasts. If this is not possible, then a slave server must be
installed on the remote subnet. If this is also not possible, you
have to force the client to bind to the remote server with ypset(8).
Unfortunately, this last option is less than ideal. If the remote
server becomes unavailable, ypbind(8) will lose its binding and
revert to its broadcast-based search behavior. Even if there are
other servers available, or even if the original server comes back
up, ypbind(8) will not be able to create a new binding since all
the servers are on remote subnets where its broadcasts won't be heard.
If the administrator isn't around to run ypset(8) again, the system
is hosed.
In some Linux NIS implementations, there exists a yp.conf file where
you can explicitly specify a server address and avoid the use of
ypbind altogether. This is not desireable since it removes the
possibility of binding to an alternate server in the event that the
one specified in yp.conf crashes.
Some people have mentioned to me how they though the 'restricted mode'
operation (using the -S flag) could be used as a solution for this
problem since it allows one to specify a list of servers. In fact,
this is not the case: the -S flag just tells ypbind(8) that when it
listens for replies to its broadcasts, it should only honor them if
the replying hosts appear in the specified restricted list.
This behavior has now been changed. If you use the -m flag in conjunction
with the -S flag, ypbind(8) will use a 'many-cast' instead of a broadcast
for choosing a server. In many-cast mode, ypbind(8) will transmit directly
to the YPPROC_DOMAIN_NONACK procedure of all the servers specified in
the restricted mode list and then wait for a reply. As with the broadcast
method, whichever server from the list answers first is used for the
local binding. All other behavior is the same: ypbind(8) continues
to ping its bound server every 60 seconds to insure it's still alive
and will many-cast again if the server fails to respond. The code used
to achieve this is in yp_ping.c; it includes a couple of modified RPC
library routines.
Note that it is not possible to use this mechanism without using
the restricted list since we need to know the addresses of the available
NIS servers ahead of time in order to transmit to them.
Most-recently-requested by: Tom Samplonius
of reconnect & -background.
o Fix reconnect anomolies.
o Make reconnect apply to failed LQR hangups (& mention in man page).
o Make reconnect effective in -background mode.
o Listen on socket in -background mode.
o Try all phone numbers in -background mode.
o Insist on system arg in -background mode.
o Make a control-connection close command exit in -background mode.
o Output status message to stdout on exit of parent in -background mode.
o Don't notify parent of success too soon.
o Describe termination EX_* code.
o Miscelaneous diagnostic corrections.
o Remove redundant connect_time from modem.c.
o Don't repeatedly DownConnection().
to FTS_LOGICAL (follow symlinks and return their targets)
Because
1) In the real system there is a lot of symlinks nowdays over
/var, /spool, etc. Mtree can't do anything for them, i.e. change
permissions/owner. I.e. if you have /var/mail -> /somewhere
it will never be changed to group "mail" 775 like -current does now,
symlink totally confuses mtree.
2) Mtree can't deal with symlinks properly in any case (they are created
separately in other places now), so we lost no functionality by making
them invisible for mtree.
can be specified without the flags field.
Fix bogus "trail" left in parse routine where the code jumps
past the end of the line and wanders into oblivion.
sysinstall about the dangerously dedicated message, and other
variables to allow pre-configuring the distribution sets.
Still todo: add a variable to define an initial set of packages that
should be loaded.
Reviewed by: jkh
(good thing for apache f.e.) This change is backward compatible with old
newsyslog.conf files.
2) Do not compress log if SIGHUP sending failed for some reason
(f.e. pid file deleted). Newcoming messages will be lost
otherwise.
3) Misc cleanup while I am here.
found that my syslogd is now running them for several months...
Add an option to syslogd to restrict the IP addresses that are allowed
to log to this syslogd. It's too late to develop the inter-syslogd
communications protocol mentioned in the BUGS section, some 10 years
too late. Thus, restricting the IP address range is about the most
effective change we can do if we want to allow incoming syslog
messages at all.
IMHO, we should encourage the system administrators to use this option,
and thus provide a knob in /etc/rc.* for it, defaulting to -a 127.0.0.1/32
(just as a hint about the usage).
Please state opinions about whether to merge this change into 2.2 or
not (i've got it running on RELENG_2_2 anyway).
Instead, reverse the order of the testing, so if a symbolic name starts with
a digit, we'll see if we can make a network address out of it first. If
that fails, then we'll call getnet...
the connection after an unexpected loss of carrier:
set reconnect timer ntries
The man page warns against using this command when your
timeout value is slightly more than the other sides :{}
Suggested by: burton@bsampley.vip.best.com (Burton Sampley)
Delete bogus local versions of mount*.[ch] and nfs_prot*.[ch].
Use v3 protocol by default for NFS mounts. If v3 is not supported, v2 is
used automatically. Add a new mount options for NFS, 'nfsv2' to allow the
administrator to force the use of the older protocol.
Document the new mount options and fix a couple of markup problems.
pppd now creates /var/run/ttyXn.if file containing the interface name;
check that a 'login' user is not listed in /etc/ppp/ppp.disabled;
check that a 'login' user's shell is listed in /etc/ppp/ppp.shells;
make sure that passwordless 'login' logins are recorded in wtmp and
utmp.
and chap-secrets files. This allows specific users
to have pre-allocated IP numbers while others get
assigned dynamically.
Submitted by: David Nugent <davidn@unique.usn.blaze.net.au>
list has been dialed. Alternate number dialing has no "pause".
Suggested by: joerg
Document this behaviour. Document that the number of dial attempts
applies to the number of phone calls rather than the number of times
each number is dialed. Add a missing .El. Give a decent description
of how to connect to an ISP.
in the transfer request actually exist. Technically ypxfr can do this too,
but why waste the cycles getting ypxfr off the ground for a transfer we
already know is going to fail.
Also apply stricter access control rules; ypproc_xfr_2_svc() is in a
different class than the normal map access procedures procedures.
nfs requests from non-privileged ports.
Change mountd such that it does never set this variable, but only clears
it when run with -n. Also document this in the man page.
and quitting telnet immediately (while phone number dialed)
Log client connection/disconnection with PHASE_BIT now.
Add more error recovery on client disconnection
(presumably because the kernel is old). Moved the declaration of a
variable realated to this sysctl outside of an unrelated ifdef.
Not fixed:
- this sysctl is badly named (nfs occurs twice).
- it's silly to have for FreeBSD in FreeBSD code, especially when
only half of the FreeBSD-dependent code is ifdefed.
in uu_lock(). Add uu_lockerr() for turning the results of
uu_lock into something printable. Remove bogus section in man page
about race conditions allowing both processes to get the lock.
Include libutil.h and use uu_lock() correctly where it should.
Suggested by: ache@freebsd.org
in the Lite2 merge to not export some nfs constants. It started causing
warnings when I added a kernel-only #define for DIRBLKSIZ.
Removed `#define NFS'. This was an old, bad interface for telling
<sys/mount.h> to export nfs stuff.
it's done for pci. This is so that systat and vmstat can get at the
interrupt counts for the Inter-Processor Interrupts when running a smp
kernel. This doesn't affect the normal kernel, but makes life easier for
the smp people who don't have to track two versions of config.
vnconfig doesn't seem to be in Lite2, although dev/vn is. The Lite2
merge in userland has converted all mount calls except this one and
one for devfs in init, so we can drop support for old mount args soon.
Vnconfig probably shouldn't support mounting - it only supports ufs.
non-standard and not used. "port auto" is equal to "port?" or missing "port"
keyword now. "port none" is really probe routine task (return -1 for
no ports).