Traditionally, fsck is invoked before the filesystems are mounted
and all checks are done to completion at that time. If background
checking is available, fsck is invoked twice. It is first invoked
at the traditional time, before the filesystems are mounted, with
the -F flag to do checking on all the filesystems that cannot do
background checking. It is then invoked a second time, after the
system has completed going multiuser, with the -B flag to do checking
on all the filesystems that can do background checking. Unlike
the foreground checking, the background checking is started
asynchonously so that other system activity can proceed even on
the filesystems that are being checked.
At the moment, only the fast filesystem supports background checking.
To be able to do background checking, a filesystem must have been
running with soft updates, not have been marked as needing a
foreground check, and be mounted and writable when the background
check is to be done (i.e., not listed as `noauto' in /etc/fstab).
These changes are the final piece needed to support background
filesystem checking. They will not have any effect until you update
your /etc/rc to invoke fsck in its new mode of operation. I am
still playing around with exactly what those changes should be
and should be committing them later this week.
Consider this /etc/fstab:
# Device Mountpoint FStype Options Dump Pass#
/dev/ad1s1b none swap sw 0 0
/dev/ad0s1b none swap sw 0 0
/dev/ad0s1a / ufs rw 1 1
/dev/ad0s1e /home ufs rw 2 2
/dev/ad1s1e /tmp ufs rw 2 2
/dev/ad1s1f /usr ufs rw 2 2
/dev/ccd0c /syv ufs rw 2 11
proc /proc procfs rw 0 0
ccd0c is striped over /dev/ad0f and /dev/ad1g
Without this pass, fsck in preen mode will check ad0s1a first,
and then issue three processes in parallel:
One process doing ad0s1e
One process doing ad1s1e and ad1s1f
One process doing ccd0c
There is no way to tell it that ccd0c overlaps ad0 and ad1.
With the patch, it will do it this way:
pass 2:
One process doing ad0s1e
One process doing ad1s1e and ad1s1f
and when they are complete:
pass 11:
One process doing ccd0c
This is much faster and more sane.
Valid pass numbers are anything from 1 to INTMAX-1.
I retired the '-l' option which tried to allow people to do
something like this, but which didn't work and which complicated
the code an awful lot.
parallel fsck's one per drive, use the shortest prefix ending in
a digit rather than the longest prefix ending in a digit.
This makes "/dev/ad0s1a" and "/dev/ad0s2a" appear to both reside
on the disk "/dev/ad0" and consequently they will be fsck'ed
sequentially rather than in parallel as now.
In general this heuristic is rather soft and errorprone. For
instance ccd may often reside on two or more physical disks. A
good solution would be to look for passes larger than 1 until no
disks are found in a particular pass, that way people could put
ccd stripes in pass 3... and have them fsck'ed sequentially.
Reviewed by: mjacob
Approved by: rwatson
Obtained from: NetBSD source tree
Second part of the fsck wrappers commit. This commit enables the new fsck
code (removing the fsck/* code and replacing it with the netbsd fsck
wrapper code), and enabling some FFS-based utilities to compile.
Details:
* quotacheck, fsdb required modification to use the fsck_ffs/ code rather
than fsck/ . This might change later since quotacheck requires preen.c
which should exist in fsck/ rather than fsck_ffs/
* src/Makefile has fsck_ffs added to it so it it built as part of the tree
now
* share/doc/smm/03.fsck/ uses the SMM.doc/ stuff from fsck_ffs, not fsck.
I've tested this, and it shouldn't require any changes on your machine.
The fsck wrapper reads /etc/fsck and is command-line-compatible enough
to not require rc changes (well, most changes unless you want to do
anything nifty by specifying the fs types explicityly, read the man page
if you want further details on what it can do.)
This now allows us to support multiple filesystem types during bootup.
which sets the inoinfo's i_parent and i_dotdot to 0, but they never get
set to ROOTINO. This means that propagate will never find lost+found and
its descendents, subdirectories will remain DSTATE (instead of DFOUND)
even though they *are* correctly linked in, and pass4.c will try to
clear them unsuccessfully, thinking that there is no link count from the
DSTATE directory's parent. The result is that you need to run fsck twice
and get link count increasing errors (which are unexpected and fatal
when running in preen mode). The fix is to set i_parent and i_dotdot to
"parent" after the second cacheino() call in dir.c:allocdir().
Obtained from: "Ethan Solomita" <ethan@geocast.com> (of the NetBSD Project)
all have zero length. A non-zero length panic's the kernel when one
of these is deleted.
PR: 19426
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
Reviewed by: dwmalone@FreeBSD.org
effect on operation of fsck on filesystems without snapshots.
If you get compilation errors, be sure that you have copies of
/usr/include/sys/mount.h (1.94), /usr/include/sys/stat.h (1.21),
and /usr/include/ufs/ffs/fs.h (1.16) as of July 4, 2000 or later.
DIR I=64512 CONNECTED. PARENT WAS I=4032
fsck: cannot find inode 995904
fsdb found the inodes with no problem:
fsdb (inum: 64512)> inode 995904
current inode: directory
I=995904 MODE=40777 SIZE=512
MTIME=Feb 14 15:27:07 2000 [0 nsec]
CTIME=Feb 14 15:27:07 2000 [0 nsec]
ATIME=Feb 24 10:31:58 2000 [0 nsec]
OWNER=nobody GRP=nobody LINKCNT=4 FLAGS=0 BLKCNT=2 GEN=38a41386
Direct blocks: 8094568 0 0 0 0 0 0 0 0 0 0 0
Indirect blocks: 0 0 0
The problem turns out to be a program logic error in fsck. It stores
directory inodes internally in hash lists, using the number of
directories to form the hash key:
inpp = &inphead[inumber % numdirs];
Elsewhere, however, it increments numdirs when it finds unattached
directories. I've made the following fix, which solved the problem in
the case in hand.
Submitted by: Greg Lehey <grog@lemis.com>
Reviewed by: Matthew Dillon <dillon@apollo.backplane.com>
Approved by: Kirk McKusick <mckusick@mckusick.com>
Also, in addition to the previous log message, the last change had a fix
for the case where where f.mntfromname is a relative path like da0a.
Submitted by: bde
- Don't use realpath as stat does the right thing.
- Only check ufs filesystems in getmntpt.
- Dont' bother checking that the ufs-mounted-on
device is a special file. It *must* be a special
file, or ufs wouldn't have mounted it.
Submitted by: Paul Saab <ps@yahoo-inc.com>
Submitted by: Kirk McKusick <mckusick@McKusick.COM>
Obtained from: Mckusick, BSDI and a host of others
This exactly matches Kirks sources imported under the
Tag MCKUSICK2. These are as supplied by kirk with one small
change needed to compile under freeBSD.
Some FreeBSD patches will be added back, though many have been
added to Kirk's sources already.
which caused the reference count of a directory to get doubly
decremented.
PR: bin/8030
Reviewed by: nate
Submitted by: Don Lewis <Don.Lewis@tsc.tdk.com>
bug was the cause of the 'freeing free frag' panics that people have been
seeing with FreeBSD/alpha. I have a similar patch to newfs but I've not
finished testing it.
support, which need a final "\n". I only observed one line of
mangled output, but I think there is another one which suffers
from the same problem, and thus I provide a patch that covers
both.
PR: 7483
Reviewed by: phk
Submitted by: Stefan Esser <se@FreeBSD.org>
that `fsck -p' doesn't check multiple slices on the same drive
concurrently. Don't invoke undefined behaviour when searching for
the drive number in strange device names.
PR: 6129
Reviewed by: phk
Submitted by: Yuichi MATSUTAKA <matutaka@osa.att.ne.jp>, but rewritten
by me.
