bytes syncronized.
The rationale behind this is the following: for large disks the
percent synchronisation counter ticks too seldom, and monitoring
software (as well as human operator) can't tell whether
synchronisation goes on or one of disks got stuck. On an idle
server one can look into gstat and see whether synchronisation goes
on or not, but on a busy server that won't work. Also, new value
monitored can be differentiated obtaining the synchronisation speed
quite precisely.
Submitted by: Konstantin Kukushkin <dark ramtel.ru>
Reviewed by: pjd
If GELI provider was created on FreeBSD HEAD r238116 or later (but before this
change), it is using very weak keys and the data is not protected.
The bug was introduced on 4th July 2012.
One can verify if its provider was created with weak keys by running:
# geli dump <provider> | grep version
If the version is 7 and the system didn't include this fix when provider was
initialized, then the data has to be backed up, underlying provider overwritten
with random data, system upgraded and provider recreated.
Reported by: Fabian Keil <fk@fabiankeil.de>
Tested by: Fabian Keil <fk@fabiankeil.de>
Discussed with: so
MFC after: 3 days
This fixes "Negative sc_ref" panic possible when sysctl_kern_geom_confxml()
is run simultaneously with destroying GATE device.
Reviewed by: pjd
MFC after: 3 days
This change triggered interesting foot shooting condition in GEOM when
RW access to root partition by fsck spoils VFS geom there, which has it
opened RO at the same time. Seems spoiling concept needs some rework.
It includes three parts:
1) Modifications to CAM to detect media media changes and report them to
disk(9) layer. For modern SATA (and potentially UAS) devices it utilizes
Asynchronous Notification mechanism to receive events from hardware.
Active polling with TEST UNIT READY commands with 3 seconds period is used
for incapable hardware. After that both CD and DA drivers work the same way,
detecting two conditions: "NOT READY: Medium not present" after medium was
detected previously, and "UNIT ATTENTION: Not ready to ready change, medium
may have changed". First one reported to disk(9) as media removal, second
as media insert/change. To reliably receive second event new
AC_UNIT_ATTENTION async added to make UAs broadcasted to all periphs by
generic error handling code in cam_periph_error().
2) Modifications to GEOM core to handle media remove and change events.
Media removal handled by spoiling all consumers attached to the provider.
Media change event also schedules provider retaste after spoiling to probe
new media. New flag G_CF_ORPHAN was added to consumers to reflect that
consumer is in process of destruction. It allows retaste to create new
geom instance of the same class, while previous one is still dying.
3) Modifications to some GEOM classes: DEV -- to report media change
events to devd; VFS -- to handle spoiling same as orphan to prevent
accessing replaced media. PART class already handles spoiling alike to
orphan.
Reviewed by: silence on geom@ and scsi@
Tested by: avg
Sponsored by: iXsystems, Inc. / PC-BSD
MFC after: 2 months
is an error set on the provider. With GEOM resizing, class can become
orphaned when it doesn't implement resize() method and the provider size
decreases.
Reviewed by: mav
Sponsored by: FreeBSD Foundation
This will allow HAST to read directly from the local component without
even communicating userland daemon.
Sponsored by: Panzura, http://www.panzura.com
MFC after: 1 month
Before this change the IV-Key was used to generate encryption keys,
which was incorrect, but safe - for the XTS mode this key was unused
anyway and for CBC mode it was used differently to generate IV
vectors, so there is no risk that IV vector collides with encryption
key somehow.
Bump version number and keep compatibility for older versions.
MFC after: 2 weeks
we need to pass BIO_DELETE requests down to providers that support
it. Also, we need to announce our support for BIO_DELETE to upper
consumer. This requires:
- In g_mirror_start() return true for "GEOM::candelete" request.
- In g_mirror_init_disk() probe below provider for "GEOM::candelete"
attribute, and mark disk with a flag if it does support BIO_DELETE.
- In g_mirror_register_request() distribute BIO_DELETE requests only
to those disks, that do support it.
Note that we announce "GEOM::candelete" as true unconditionally of
whether we have TRIM-capable media down below or not. This is made
intentionally, because upper consumer (usually UFS) requests the
attribite only once at mount time. And if user ever migrates his
mirror from HDDs to SSDs, then he/she would get TRIM working without
remounting filesystem.
Reviewed by: pjd
a da(4) instance going away while GEOM is still probing it.
In this case, the GEOM disk class instance has been created by
disk_create(), and the taste of the disk is queued in the GEOM
event queue.
While that event is queued, the da(4) instance goes away. When the
open call comes into the da(4) driver, it dereferences the freed
(but non-NULL) peripheral pointer provided by GEOM, which results
in a panic.
The solution is to add a callback to the GEOM disk code that is
called when all of its resources are cleaned up. This is
implemented inside GEOM by adding an optional callback that is
called when all consumers have detached from a provider, and the
provider is about to be deleted.
scsi_cd.c,
scsi_da.c: In the register routine for the cd(4) and da(4)
routines, acquire a reference to the CAM peripheral
instance just before we call disk_create().
Use the new GEOM disk d_gone() callback to register
a callback (dadiskgonecb()/cddiskgonecb()) that
decrements the peripheral reference count once GEOM
has finished cleaning up its resources.
In the cd(4) driver, clean up open and close
behavior slightly. GEOM makes sure we only get one
open() and one close call, so there is no need to
set an open flag and decrement the reference count
if we are not the first open.
In the cd(4) driver, use cam_periph_release_locked()
in a couple of error scenarios to avoid extra mutex
calls.
geom.h: Add a new, optional, providergone callback that
is called when a provider is about to be deleted.
geom_disk.h: Add a new d_gone() callback to the GEOM disk
interface.
Bump the DISK_VERSION to version 2. This probably
should have been done after a couple of previous
changes, especially the addition of the d_getattr()
callback.
geom_disk.c: Add a providergone callback for the disk class,
g_disk_providergone(), that calls the user's
d_gone() callback if it exists.
Bump the DISK_VERSION to 2.
geom_subr.c: In g_destroy_provider(), call the providergone
callback if it has been provided.
In g_new_geomf(), propagate the class's
providergone callback to the new geom instance.
blkfront.c: Callers of disk_create() are supposed to pass in
DISK_VERSION, not an explicit disk API version
number. Update the blkfront driver to do that.
disk.9: Update the disk(9) man page to include information
on the new d_gone() callback, as well as the
previously added d_getattr() callback, d_descr
field, and HBA PCI ID fields.
MFC after: 5 days
Without it, it fails to create labels for filesystems resized by
growfs(8).
PR: kern/165962
Submitted by: Olivier Cochard-Labbe <olivier at cochard dot me>
into partitions.
Partitions are created based on data in dts file which are
extracted and interpreted by slicer.
Obtained from: Semihalf
Supported by: FreeBSD Foundation, Juniper Networks
failed while write to some other succeeded. Instead mark disk as failed.
- Make RAID1E less aggressive in failing disks to avoid volume breakage.
MFC after: 2 weeks
defined by the SNIA Common RAID Disk Data Format Specification v2.0.
Supports multiple volumes per array and multiple partitions per disk.
Supports standard big-endian and Adaptec's little-endian byte ordering.
Supports all single-layer RAID levels. Dual-layer RAID levels except
RAID10 are not supported now because of GEOM RAID design limitations.
Some work is still to be done, but the present code already manages basic
interoperation with RAID BIOS of the Adaptec 1430SA SATA RAID controller.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
- Implement "configure" command to allow switching operation mode of
running device on-fly without destroying and recreation.
- Implement Active/Read mode as hybrid of Active/Active and Active/Passive.
In this mode all paths not marked FAIL may handle reads same time,
but unlike Active/Active only one path handles write requests at any
point in time. It allows to closer follow original write request order
if above layers need it for data consistency (not waiting for requisite
write completion before sending dependent write).
- Hide duplicate messages about device status change.
- Remove periodic thread wake up with 10Hz rate.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
accounting for I/O counts at completion of I/O operation. Also switch
from using global devmtx to vnode mutex to reduce contention.
Suggested and reviewed by: kib
to enable the collection of counts of synchronous and asynchronous
reads and writes for its associated filesystem. The counts are
displayed using `mount -v'.
Ensure that buffers used for paging indicate the vnode from
which they are operating so that counts of paging I/O operations
from the filesystem are collected.
This checkin only adds the setting of the mount point for the
UFS/FFS filesystem, but it would be trivial to add the setting
and clearing of the mount point at filesystem mount/unmount
time for other filesystems too.
Reviewed by: kib
KLD is preloaded with loader(8) and leads to infinity loops.
Also do not return EEXIST error code from MOD_LOAD handler, because
we have undocumented(?) ability replace kernel's module with preloaded one.
And if we have so, then preloaded module will be initialized first.
Thus error in MOD_LOAD handler will be triggered for the kernel.
PR: kern/165573
MFC after: 3 weeks
scheme. The LDM is a logical volume manager for MS Windows NT and it
is also known as dynamic volumes. It supports about 2000 partitions
and also provides the capability for software RAID implementations.
This version implements only partitioning scheme capability and based
on the linux-ntfs project documentation and several publications across
the Web. NOTE: JBOD, RAID0 and RAID5 volumes aren't supported.
An access to the LDM metadata is read-only. When LDM is on the disk
partitioned with MBR we can also destroy metadata. For the GPT
partitioned disks destroy action is not supported.
Reviewed by: ivoras (previous version)
MFC after: 1 month
It's not clear to a user what they should do after seeing the "geometry
does not match label" kernel message, and it does not appear to present
a problem in practice. Thus, just remove the messages.
Approved by: marcel
types 0x05 and 0x0f, but 0x05 is preferred and used when partition is
created with "gpart add -t ebr ...".
This should keep EBR partitions accessible after r231754 for those,
who have EBR on the partition with type 0x0f.
don't try probe and create EBR scheme when parent partition type
is not "ebr". This fixes error messages about corrupted EBR for
some partitions where is actually another partition scheme.
NOTE: if you have EBR on the partition with different than "ebr"
(0x05) type, then you will lost access to partitions until it will be
changed.
MFC after: 2 weeks
mnt_noasync counter to temporary remove MNTK_ASYNC mount option, which
is needed to guarantee a synchronous completion of the initiated i/o
before syscall or VOP return. Global removal of MNTK_ASYNC option is
harmful because not only i/o started from corresponding thread becomes
synchronous, but all i/o is synchronous on the filesystem which is
initiated during sync(2) or syncer activity.
Instead of removing MNTK_ASYNC from mnt_kern_flag, provide a local
thread flag to disable async i/o for current thread only. Use the
opportunity to move DOINGASYNC() macro into sys/vnode.h and
consistently use it through places which tested for MNTK_ASYNC.
Some testing demonstrated 60-70% improvements in run time for the
metadata-intensive operations on async-mounted UFS volumes, but still
with great deviation due to other reasons.
Reviewed by: mckusick
Tested by: scottl
MFC after: 2 weeks
primitives by breaking stop_scheduler into a per-thread variable.
Also, store the new td_stopsched very close to td_*locks members as
they will be accessed mostly in the same codepaths as td_stopsched and
this results in avoiding a further cache-line pollution, possibly.
STOP_SCHEDULER() was pondered to use a new 'thread' argument, in order to
take advantage of already cached curthread, but in the end there should
not really be a performance benefit, while introducing a KPI breakage.
In collabouration with: flo
Reviewed by: avg
MFC after: 3 months (or never)
X-MFC: r228424
as the system dump device. This was already allowed for GPT. The Linux
swap metadata at the beginning of the partition should not be disturbed
because the crash dump is written at the end.
Reviewed by: alfred, pjd, marcel
MFC after: 2 weeks
have reserved free space in the APM area.
Also instead of one write request per each APM entry, use MAXPHY
sized writes when we are updating APM.
MFC after: 1 month
Before r215687, if some withered geom or provider could not be destroyed,
g_event thread went to sleep for 0.1s before retrying. After that change
it is just restarting immediately. r227009 made orphaned (withered) provider
to not detach immediately, but only after context switch. That made loop
inside g_event thread infinite on UP systems without PREEMPTION.
To address original problem with possible dead lock addressed by r227009
we have to fix r215687 change first, that needs some time to think and test.
- Improved locking and destruction process to fix crashes.
- Improved "automatic" configuration method to make it consistent and safe
by reading metadata back from all specified paths after writing to one.
- Added provider size check to reduce chance of ordering conflict with
other GEOM classes.
- Added "manual" configuration method without using on-disk metadata.
- Added "add" and "remove" commands to allow manage paths manually.
- Failed paths are no longer dropped from geom, but only marked as FAIL
and excluded from I/O operations.
- Automatically restore failed paths when all others paths are marked
as failed, for example, because of device-caused (not transport) errors.
- Added "fail" and "restore" commands to manually control FAIL flag.
- geom is now destroyed on last path disconnection.
- Added optional Active/Active mode support. Unlike Active/Passive
mode, load evenly distributed between all working paths. If supported by
the device, it allows to significantly improve performance, utilizing
bandwidth of all paths. It is controlled by -A option during creation.
Disabled by default now.
- Improved `status` and `list` commands output.
Sponsored by: iXsystems, inc.
MFC after: 1 month
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
- delay consumer closing and detaching on orphan() until all I/Os complete;
- prevent new I/Os submission after orphan() called.
Previous implementation could destroy consumers still having active
requests and worked only because of global workaround made on GEOM level.
instead of destroy_dev(). It moves device destruction waiting out of the
topology lock and so fixes dead lock between orphanization and closing.
Real provider and geom destruction called from swi context after device
destroyed as callback of the destroy_dev_sched_cb().
Do not close/destroy opened consumer directly in case of disconnect. Instead
keep it existing until it will be closed in regular way in response to
upstream provider destruction. Delay geom destruction in the same way.
Previous implementation could destroy consumers still having active
requests and worked only because of global workaround made on GEOM level.
Do not close/destroy opened consumer directly in case of disconnect. Instead
keep it existing until it will be closed in regular way in response to
upstream provider destruction. Delay geom destruction in the same way.
Previous implementation could destroy consumers still having active
requests and worked only because of global workaround made on GEOM level.
r162200 delays provider orphanization until all running requests complete,
to workaround broken orphan() method implementation in some classes.
r215687 removes persistent periodic (10Hz) event thread wake ups.
Together these changes can indefinitely delay orphanization until some
other event wake up the event thread. One consequence of this is inability
of CAM to destroy device disconnected when busy and, as consequence, create
new one after reconnection.
While the best solution would be to revert r162200, it is not easy, as
some classes still look broken in that way. Instead conditionally wake up
event thread if there are some providers waiting for orphanization.
MFC after: 1 week
providers and consumers will be destroyed. Before take some actions
with a geom, check that it is not destroyed at the moment.
Tested by: nwhitehorn
MFC after: 1 week
start only one worker thread. For software crypto it will start by default
N worker threads where N is the number of available CPUs.
This is not optimal if hardware crypto is AES-NI, which uses CPU for AES
calculations.
Change that to always start one worker thread for every available CPU.
Number of worker threads per GELI provider can be easly reduced with
kern.geom.eli.threads sysctl/tunable and even for software crypto it
should be reduced when using more providers.
While here, when number of threads exceeds number of CPUs avilable don't
reduce this number, assume the user knows what he is doing.
Reported by: Yuri Karaban <dev@dev97.com>
MFC after: 3 days
- add support for volumes above 2TiB with Promise metadata format;
- enforse and document other limitations:
- Intel and Promise metadata formats do not support disks above 2TiB;
- NVIDIA metadata format does not support volumes above 2TiB.
Sponsored by: iXsystems, Inc.
MFC after: 2 weeks
with older FreeBSD versions:
- Add -V option to 'geli init' to specify version number. If no -V is given
the most recent version is used.
- If -V is given don't allow to use features not supported by this version.
- Print version in 'geli list' output.
- Update manual page and add table describing which GELI version is
supported by which FreeBSD version, so one can use it when preparing GELI
device for older FreeBSD version.
Inspired by: Garrett Cooper <yanegomi@gmail.com>
MFC after: 3 days
o Detect when Boot Camp is enabled (i.e. the MBR mirrors the GPT).
o When Boot Camp is enabled, update the MBR whenever we write the GPT.
o Creation of a Boot Camp enabled GPT is not supported.
o Automatically disable Boot Camp when the GPT has been changed so that
there's either no EFI partition or no HFS+ partition.
o The first 4 partitions (by index) get mirrored in the MBR.
Requested by, discussed with and tested by: kris@pcbsd.org
MFC after: 1 week
filesystems to be opened for writing. This functionality used to
be special-cased for just the root filesystem, but with this change
is now available for all UFS filesystems. This change is needed for
journaled soft updates recovery.
Discussed with: Jeff Roberson
This fixes the problem, when the secondary GPT header is not erased when
partition table destroyed. Move equal operations from g_part_gpt_create
and g_part_gpt_recover to the separate function g_gpt_set_defaults.
Reported by: dwhite
MFC after: 1 week
Remove message about non empty bootcode, we can not break something
while GEOM_PART_EBR_COMPAT is defined.
But without GEOM_PART_EBR_COMPAT any changes in EBR are allowed and we
can accidentally wipe the boot code. To do not break anything save
the first EBR chunk and keep it untouched each time when we are
changing EBR. Note that we are still not support boot code for EBR.
PR: kern/141235
MFC after: 1 month
disk drive. The boot0cfg(8) utility preserves these 4 bytes when is
writing bootcode to keep a multiboot ability.
Change gpart's bootcode method to keep DSN if it is not zero. Also
do not allow writing bootcode with size not equal to MBRSIZE.
PR: kern/157819
Tested by: Eir Nym
MFC after: 1 month
Since the only parameter that we check is size of bootcode, then
allow only two sizes: size of boot1 and size of /boot/boot.
This partially protects users from losing ability to boot if incorrect
bootcode is specified.
Requested by: ru
DEVFS, and make it accessible via the diskinfo utility.
Extend GEOM's generic attribute query mechanism into generic disk consumers.
sys/geom/geom_disk.c:
sys/geom/geom_disk.h:
sys/cam/scsi/scsi_da.c:
sys/cam/ata/ata_da.c:
- Allow disk providers to implement a new method which can override
the default BIO_GETATTR response, d_getattr(struct bio *). This
function returns -1 if not handled, otherwise it returns 0 or an
errno to be passed to g_io_deliver().
sys/cam/scsi/scsi_da.c:
sys/cam/ata/ata_da.c:
- Don't copy the serial number to dp->d_ident anymore, as the CAM XPT
is now responsible for returning this information via
d_getattr()->(a)dagetattr()->xpt_getatr().
sys/geom/geom_dev.c:
- Implement a new ioctl, DIOCGPHYSPATH, which returns the GEOM
attribute "GEOM::physpath", if possible. If the attribute request
returns a zero-length string, ENOENT is returned.
usr.sbin/diskinfo/diskinfo.c:
- If the DIOCGPHYSPATH ioctl is successful, report physical path
data when diskinfo is executed with the '-v' option.
Submitted by: will
Reviewed by: gibbs
Sponsored by: Spectra Logic Corporation
Add generic attribute change notification support to GEOM.
sys/sys/geom/geom.h:
Add a new attrchanged method field to both g_class
and g_geom.
sys/sys/geom/geom.h:
sys/geom/geom_event.c:
- Provide the g_attr_changed() function that providers
can use to advertise attribute changes.
- Perform delivery of attribute change notifications
from a thread context via the standard GEOM event
mechanism.
sys/geom/geom_subr.c:
Inherit the attrchanged method from class to geom (class instance).
sys/geom/geom_disk.c:
Provide disk_attr_changed() to provide g_attr_changed() access
to consumers of the disk API.
sys/cam/scsi/scsi_pass.c:
sys/cam/scsi/scsi_da.c:
sys/geom/geom_dev.c:
sys/geom/geom_disk.c:
Use attribute changed events to track updates to physical path
information.
sys/cam/scsi/scsi_da.c:
Add AC_ADVINFO_CHANGED to the registered asynchronous CAM
events for this driver. When this event occurs, and
the updated buffer type references our physical path
attribute, emit a GEOM attribute changed event via the
disk_attr_changed() API.
sys/cam/scsi/scsi_pass.c:
Add AC_ADVINFO_CHANGED to the registered asynchronous CAM
events for this driver. When this event occurs, update
the physical patch devfs alias for this pass instance.
Submitted by: gibbs
Sponsored by: Spectra Logic Corporation
They are media-dependent and may change in run-time, same as sectorsize
and/or mediasize.
SCSI devices return physical sector size and offset via READ CAPACITY(16)
command and so can not report it until media inserted or at least until
probe sequence completed. UNMAP support is also reported there.
geometry and partitions may start from withing the first track.
If we found such partitions, then do not reserve space of the
first track, only first sector.
partition tables and lost an ability to boot after r221788.
Also unhide an error message from bootverbose, this would help to
easier determine the problem.
probed and read successfull, but it contains invalid values (e.g.
overlapped partitions, offset or size is out of bounds), then table
will be rejected.
MFC after: 1 month
was not updated to pass CRD_F_KEY_EXPLICIT flag to opencrypto. This resulted in
always using first key.
We need to support providers created with this bug, so set special
G_ELI_FLAG_FIRST_KEY flag for GELI provider in integrity mode with version
smaller than 6 and pass the CRD_F_KEY_EXPLICIT flag to opencrypto only if
G_ELI_FLAG_FIRST_KEY doesn't exist.
Reported by: Anton Yuzhaninov <citrin@citrin.ru>
MFC after: 1 week
cpuset_t objects.
That is going to offer the underlying support for a simple bump of
MAXCPU and then support for number of cpus > 32 (as it is today).
Right now, cpumask_t is an int, 32 bits on all our supported architecture.
cpumask_t on the other side is implemented as an array of longs, and
easilly extendible by definition.
The architectures touched by this commit are the following:
- amd64
- i386
- pc98
- arm
- ia64
- XEN
while the others are still missing.
Userland is believed to be fully converted with the changes contained
here.
Some technical notes:
- This commit may be considered an ABI nop for all the architectures
different from amd64 and ia64 (and sparc64 in the future)
- per-cpu members, which are now converted to cpuset_t, needs to be
accessed avoiding migration, because the size of cpuset_t should be
considered unknown
- size of cpuset_t objects is different from kernel and userland (this is
primirally done in order to leave some more space in userland to cope
with KBI extensions). If you need to access kernel cpuset_t from the
userland please refer to example in this patch on how to do that
correctly (kgdb may be a good source, for example).
- Support for other architectures is going to be added soon
- Only MAXCPU for amd64 is bumped now
The patch has been tested by sbruno and Nicholas Esborn on opteron
4 x 12 pack CPUs. More testing on big SMP is expected to came soon.
pluknet tested the patch with his 8-ways on both amd64 and i386.
Tested by: pluknet, sbruno, gianni, Nicholas Esborn
Reviewed by: jeff, jhb, sbruno
device in /dev/ create symbolic link with adY name, trying to mimic old ATA
numbering. Imitation is not complete, but should be enough in most cases to
mount file systems without touching /etc/fstab.
- To know what behavior to mimic, restore ATA_STATIC_ID option in cases
where it was present before.
- Add some more details to UPDATING.
bytes. Remove bogus assertion and while here remove another too obvious
assertion.
Reported by: Fabian Keil <freebsd-listen@fabiankeil.de>
MFC after: 2 weeks
allocate all of them at attach time. This allows to avoid moving
keys around in the most-recently-used queue and needs no mutex
synchronization nor refcounting.
MFC after: 2 weeks
create reasonably large cache for the keys that is filled when
needed. The previous version was problematic for very large providers
(hundreds of terabytes or serval petabytes). Every terabyte of data
needs around 256kB for keys. Make the default cache limit big enough
to fit all the keys needed for 4TB providers, which will eat at most
1MB of memory.
MFC after: 2 weeks
embedded flash stores.
Some devices - notably those with uboot - don't have an
explicit partition table (eg like Redboot's FIS.)
geom_map thus provides an easy way to export the hard-coded
flash layout as geom providers for use by filesystems and
other tools.
It also includes a "search" function which allows for
dynamic creation of partition layouts where the device only
has a single hard-coded partition. For example, if
there is a "kernel+rootfs" partition, a single image can
be created which appends the rootfs after the kernel with
an appropriate search string. geom_map can be told to
search for said search string and create a partition
beginning after it.
Submitted by: Aleksandr Rybalko <ray@dlink.ua>
bio_children > 1, g_destroy_bio() is never called and the bio
leaks. Fix this by calling g_destroy_bio() earlier, before the check.
Submitted by: Victor Balada Diaz <victor@bsdes.net> (initial version)
Approved by: pjd (mentor)
MFC after: 1 week
g_io_deliver(). In such case it increases 'pace' counter on each ENOMEM and
reschedules the request. The 'pace' counter is decreased for each request going
down, but until 'pace' is greater than zero, GEOM will handle at most 10
requests per second. For GEOM GATE users that are proxy to local GEOM providers
(like ggatel(8) and HAST) we can end up with almost permanent slow down of GEOM
down queue. This is because once we reach GEOM GATE queue limit, we return
ENOMEM to the GEOM. This means that we have, eg. 1024 I/O requests in the GEOM
GATE queue. To make room in the queue and stop returning ENOMEM we need to
proceed the requests of course, but those requests are handled by userland
daemons that handle them by reading/writing also from/to local GEOM providers.
For example with HAST, a new requests comes to /dev/hast/data, which is GEOM
GATE provider. GEOM GATE passes the request to hastd(8) and hastd(8)
reads/writes from/to /dev/da0. Once we reach GEOM GATE queue limit, to free up
a slot in GEOM GATE queue, hastd(8) has to read/write from/to /dev/da0, but
this request will also be very slow, because GEOM now slows down all the
requests. We end up with full queue that we can unload at the speed of 10
requests per second. This simply looks like a deadlock.
Fix it by allowing userland daemons that work with both GEOM GATE and local
GEOM providers to specify unlimited queue size, so GEOM GATE will never return
ENOMEM to the GEOM.
MFC after: 1 week
registered in g_gate_units array and when its sc_provider field is
filled. If during this period g_gate_units is accessed by another
thread that is checking for provider name collision the crash is
possible.
Fix this by adding sc_name field to struct g_gate_softc. In
g_gate_create() when g_gate_softc is created but sc_provider is still
not sc_name points to provider name stored in the local array.
Approved by: pjd (mentor)
Reported by: Freddie Cash <fjwcash@gmail.com>
MFC after: 1 week
Add new RAID GEOM class, that is going to replace ataraid(4) in supporting
various BIOS-based software RAIDs. Unlike ataraid(4) this implementation
does not depend on legacy ata(4) subsystem and can be used with any disk
drivers, including new CAM-based ones (ahci(4), siis(4), mvs(4), ata(4)
with `options ATA_CAM`). To make code more readable and extensible, this
implementation follows modular design, including core part and two sets
of modules, implementing support for different metadata formats and RAID
levels.
Support for such popular metadata formats is now implemented:
Intel, JMicron, NVIDIA, Promise (also used by AMD/ATI) and SiliconImage.
Such RAID levels are now supported:
RAID0, RAID1, RAID1E, RAID10, SINGLE, CONCAT.
For any all of these RAID levels and metadata formats this class supports
full cycle of volume operations: reading, writing, creation, deletion,
disk removal and insertion, rebuilding, dirty shutdown detection
and resynchronization, bad sector recovery, faulty disks tracking,
hot-spare disks. For Intel and Promise formats there is support multiple
volumes per disk set.
Look graid(8) manual page for additional details.
Co-authored by: imp
Sponsored by: Cisco Systems, Inc. and iXsystems, Inc.
Introduce new type of BIO_GETATTR -- GEOM::setstate, used to inform lower
GEOM about state of it's providers from the point of upper layers.
Make geom_disk use led(4) subsystem to illuminate states in such fashion:
FAILED - "1" (on), REBUILD - "f5" (slow blink), RESYNC - "f1" (fast blink),
ACTIVE - "0" (off).
LED name should be set for each disk via kern.geom.disk.%s.led sysctl.
Later disk API could be extended to allow disk driver to report this info
in custom way via it's own facilities.
Change BIO_GETATTR("GEOM::kerneldump") API to make set_dumper() called by
consumer (geom_dev) instead of provider (geom_disk). This allows any geom
insert it's code into the dump call chain, implementing more sophisticated
functionality then just disk partitioning.
'/boot', which confuses the devfs code and can cause userland programs to
fail reading /dev/ext2fs directory with weird error code, such as any
program that uses pwlib.
Strip any leading slashes before feeding the label to the geom_label code.
Sponsored by: Sippy Software, Inc.
MFC after: 1 week
No FreeBSD version bump, the userland application to query the features will
be committed last and can serve as an indication of the availablility if
needed.
Sponsored by: Google Summer of Code 2010
Submitted by: kibab
Reviewed by: silence on geom@ during 2 weeks
X-MFC after: to be determined in last commit with code from this project
