There were no serious problem reports on this in spite of my concern.
To get debug output from acpi_pci_link, just enable bootverbose flag
in usual manner (boot -v).
Approved by: re
aicasm_gram.y:
Use a direct move from allzeros to emulate a
mvi of 0.
aicasm_insformat.h:
sync $Id$
aicasm_symbol.c:
Minor header change.
Approved by: re (blanket)
pci_get_ether accesor, which gets it from the CIS for cardbus cards
(and from other pci-like buses via whatever mechanism is used there).
Submitted by: sam
Approved by: re (blanket)
sometimes, so return it when requested and it does. Also a little
more infrastructure for a few other things.
Submitted by: sam
Approved by: re (blanket for NEWCARD)
buses support querying the MAC address in a standard-for-that-bus way.
The base pci bus returns NULL for this IVAR always.
Submitted by: sam
Approved by: re (blanket for NEWCARD)
Fix a bug with the 3.3V code for the ricoh bridges. I got the bit
detect backwards. Also, we can only detect 3.3V cards when the GPI
interrupt is disabled. So when it is enabled assume 5.0V card.
Obtained from: NetBSD (takemura-san from patches by ngc@ff.iij4u.or.jp)
Approved by: re (blanket)
on this.
o Update the `cur' pointer in the cluster loop in m_getm() to avoid
incorrect truncation and leaked mbufs.
Reviewed by: bmilekic
Approved by: re
create an ABI that encodes offsets and sizes of structures into client
drivers. The functions isolate the ABI from changes to the resource
structure. Since these are used very rarely (once at startup), the
speed penalty will be down in the noise.
Also, add r_rid to the structure so that clients can save the 'rid' of
the resource in the struct resource, plus accessor functions. Future
additions to newbus will make use of this to present a simplified
interface for resource specification.
Approved by: re (jhb)
Reviewed by: jhb, jake
the old 8-bit fs_old_flags to the new location the first time that the
filesystem is mounted by a new kernel. One of the unused flags in
fs_old_flags is used to indicate that the flags have been moved.
Leave the fs_old_flags word intact so that it will work properly if
used on an old kernel.
Change the fs_sblockloc superblock location field to be in units
of bytes instead of in units of filesystem fragments. The old units
did not work properly when the fragment size exceeeded the superblock
size (8192). Update old fs_sblockloc values at the same time that
the flags are moved.
Suggested by: BOUWSMA Barry <freebsd-misuser@netscum.dyndns.dk>
Sponsored by: DARPA & NAI Labs.
1) "ubt" driver did not work when system is booted with the device attached
2) missing "break;" in ubt_rcvmsg() function;
Submitted by: Maksim Yevmenkin <Maksim.Yevmenkin@cw.com>
Approved by: re (jhb)
problem was a locked directory vnode), do not give the process a chance
to sleep in state "stopevent" (depends on the S_EXEC bit being set in
p_stops) until most resources have been released again.
Approved by: re
Control) as a MAC Framework policy module. Unlike the existing
src/sys/security/lomac implementation, this one has its fingers out
of the kernel lock order and doesn't make use of flags in existing
kernel structures. This greatly reduces the quantity of replicated
code with src/sys/kern, simplifies the implementation (3000 vs 8500
lines), and correctes a number of known stability problems with
the existing LOMAC implementation, which will be removed. A bit
more hooking up to do here.
Approved by: re
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
instead of panicing. Also, perform some of the simpler sanity checks on
the fds before acquiring the filedesc lock.
Approved by: re
Reported by: Dan Nelson <dan@emsphone.com> and others
by policy modules making use of downgrades in the MAC AST event. This
is required by the mac_lomac port of LOMAC to the MAC Framework.
Approved by: re
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
- If a PCI device is not present, then a 32-bit read_config() is going to
return 0xffffffff not 0xffff.
- For the 82454NX chipset, the MIOC that we read the bus numbers of the
various host-PCI bridges from is at function (slot) 0x10 not 0x0.
Approved by: re (rwatson)
1. Detect the revision of the Rhine chip we're using.
2. Use the force reset command on revisions which support
it whenever the normal reset command fails.
This should solve a wide range of "my vr0 locks up with reset
failed messages" problems. (Although the root causes should
be eventually tracked down.)
Tested by: grenville armitage <garmitage@swin.edu.au>
Obtained from: Via's if_fet driver
MFC after: 3 days
Approved by: re
to the sparc64 implementation. (Note: With modest effort on the alpha and
ia64 this function could migrate to the MI part of the kernel.)
Approved by: re (blanket)
Add function map_port_space() to map the memory mapped I/O port
range as uncacheable virtual memory and call it prior to probing
for a console. This removes the dependency on the loader to have
done this for us. Note that this change does not include doing
the same for APs.
Approved by: re (blanket)
