device is an active kernel console and "off" otherwise. This is designed to
allow serial-booting x86 systems to provide a login prompt on the serial line
by default without providing one on all systems by default.
Comments and suggestions by: grehan, dteske, jilles
MFC after: 1 month
3-clause BSD license as specified by Oracle America, Inc. in 2010.
This license change was approved by Wim Coekaerts, Senior Vice
President, Linux and Virtualization at Oracle Corporation.
when there is an invalid character in the output codeset while it is
valid in the input. However, POSIX requires iconv() to perform an
implementation-defined conversion on the character. So, Citrus iconv converts
such a character to a special character which means it is invalid in the
output codeset.
This is not a problem in most cases but some software like libxml2 depends
on GNU's behavior to determine if a character is output as-is or another form
such as a character entity (&#NNN;).
FreeBSD systems usually implemented this as a third party module and
our implementation hasn't played as nicely with the old way as it could
have.
To that end:
* Rename the iconv* symbols in libc.so.7 to have a __bsd_ prefix.
* Provide .symver compatability with existing 10.x+ binaries that
referenced the iconv symbols. All existing binaries should work.
* Like on Linux/glibc systems, add a libc_nonshared.a to the ldscript
at /usr/lib/libc.so.
* Move the "iconv*" wrapper symbols to libc_nonshared.a
This should solve the runtime ambiguity about which symbols resolve
to where. If you compile against the iconv in libc, your runtime
dependencies will be unambiguous.
Old 9.x libraries and binaries will always resolve against their
libiconv.so.3 like they did on 9.x. They won't resolve against libc.
Old 10.x binaries will be satisified by the .symver helpers.
This should allow ports to selectively compile against the libiconv
port if needed and it should behave without ambiguity now.
Discussed with: kib
good. This caused libc to spoof the ports libiconv namespace and
provide a colliding libiconv.so.3 to fool rtld. This should have
been removed some time ago.
in net, to avoid compatibility breakage for no sake.
The future plan is to split most of non-kernel parts of
pfvar.h into pf.h, and then make pfvar.h a kernel only
include breaking compatibility.
Discussed with: bz
newvers.sh. Pass it in from include/Makefile. If it isn't passed in,
fall back to the old logic of using dirname $0.
Using dirname $0 does not yield the path to the script if it was
sourced in from another script in another directory; you end up with
the parent script's path. That was causing newvers.sh to look one
level below the FreeBSD src/ directory when building osreldate.h and it
may find something like a git or svn repo there that has nothing to do
with FreeBSD.
PR: 174422
Approved by: re ()
MFC after: 2 weeks
This would cause detection of old versions of SVN to cause fatal errors
instead of being caught and handled, which would make the build fail if
the tree had been checked out with an older version of SVN (e.g. 1.6).
Discussed with: gjb
Approved by: re (marius)
may come in from the environment and reflect the user's interactive shell.
Using bare "sh" is the dominant pattern in existing makefiles.
MFC this together with r255775.
Approved by: re ()
MFC after: 2 weeks
than launching the script directly and relying on #! to launch the shell.
This avoids problems when the source is mounted with the noexec flag.
MFC this together with r255775.
Approved by: re (kib)
MFC after: 2 weeks
newvers.sh into a temporary subshell with inline make rules.
Using a separate script fixes a variety of problems, including establishing
the correct dependencies in the makefiles. It also eliminates a problem
with the way newvers.sh uses `realpath $0`, because $0 expands differently
within a script sourced into a rule in a makefile depending on the version
of make and of /bin/sh being used. The latter can cause build breakage in a
cross-build environment, and can also make it difficult to compile 10.0 on
older pre-10.0 systems.
PR: 160646 174422
Submitted by: Garrett Cooper <yaneurabeya@gmail.com>
Approved by: re (gjb)
MFC after: 2 weeks
hrs@ provided this verison of the patch and showed me where all the needed
changes were to be made outside of gpioctl.c
Approved by: re (hrs)
MFC after: 2 weeks
function, but returns directory file descriptor instead of closing it.
Submitted by: Mariusz Zaborski <oshogbo@FreeBSD.org>
Sponsored by: Google Summer of Code 2013
I removed functionality not proposed for POSIX in Austin group issue #411.
A man page (my own) and test cases will follow in later commits.
PR: 176233
Submitted by: Jukka Ukkonen
extensions and also tried to be link time compatible with ports libiconv.
This splits that functionality and enables the parts that shouldn't
interfere with the port by default.
WITH_ICONV (now on by default) - adds iconv.h, iconv_open(3) etc.
WITH_LIBICONV_COMPAT (off by default) adds the libiconv_open etc API, linker
symbols and even a stub libiconv.so.3 that are good enough to be able
to 'pkg delete -f libiconv' on a running system and reasonably expect it
to work.
I have tortured many machines over the last few days to try and reduce
the possibilities of foot-shooting as much as I can. I've successfully
recompiled to enable and disable the libiconv_compat modes, ports that use
libiconv alongside system iconv etc. If you don't enable the
WITH_LIBICONV_COMPAT switch, they don't share symbol space.
This is an extension of behavior on other system. iconv(3) is a standard
libc interface and libiconv port expects to be able to run alongside it on
systems that have it.
Bumped osreldate.
but ACM formula we use have internal state (and return value) in the
[1, 0x7ffffffe] range, so our RAND_MAX (0x7fffffff) is never reached
because it is off by one, zero is not reached too.
Correct both RAND_MAX and rand(3) return value, shifting last one
to the 0 by 1 subtracted, resulting POSIXed [0, 0x7ffffffd(=new RAND_MAX)]
range.
2) Add a checks for not overflowing on too big seeds. It may happens on
the machines, where sizeof(unsigned int) > 32 bits.
Reviewed by: bde [1]
MFC after: 2 weeks
a macro with parameters. Remove a __DECONST hack and add consts instead
for gnu libiconv API compatability. This makes it work with things like
devel/boost-libs that expects to use "iconv" as though it were a pointer.
- Reconnect with some minor modifications, in particular now selsocket()
internals are adapted to use sbintime units after recent'ish calloutng
switch.
device names "md" or "md[0-9]*" and a "file" option are specified in
/etc/fstab like this:
md none swap sw,file=/swap.bin 0 0
- Add GBDE/GELI encrypted swap space specification support, which
rc.d/encswap supported. The /etc/fstab lines are like the following:
/dev/ada1p1.bde none swap sw 0 0
/dev/ada1p2.eli none swap sw 0 0
.eli devices accepts aalgo, ealgo, keylen, and sectorsize as options.
swapctl(8) can understand an encrypted device in the command line
like this:
# swapctl -a /dev/ada2p1.bde
- "-L" flag is added to support "late" option to defer swapon until
rc.d/mountlate runs.
- rc.d script change:
rc.d/encswap -> removed
rc.d/addswap -> just display a warning message if $swapfile is defined
rc.d/swap1 -> renamed to rc.d/swap
rc.d/swaplate -> newly added to support "late" option
These changes alleviate a race condition between device creation/removal
and swapon/swapoff.
MFC after: 1 week
Reviewed by: wblock (manual page)
implementations visible for use by applications. The functions $F that
are now weak symbols are:
allocm, calloc, dallocm, free, malloc, malloc_usable_size,
nallocm, posix_memalign, rallocm, realloc, sallocm
The non-weak implementations of $F are exported as __$F.
Submitted by: stevek@juniper.net
Reviewed by: jasone@, kib@
Approved by: jasone@ (jemalloc)
Obtained from: juniper Networks, Inc
It turns out that in C++11, char16_t and char32_t are built-in types;
language keywords. Just fix this by putting traditional _*_T_DECLARED
blocks around the definitions. We'll just predefine these in
<sys/_types.h>.
This also opens up the possibility to define char16_t in other header
files, if ever needed (e.g. if we would gain a <ctype.h> for
char16_t/char32_t).
The <uchar.h> header, part of C11, adds a small number of utility
functions for 16/32-bit "universal" characters, which may or may not be
UTF-16/32. As our wchar_t is already ISO 10646, simply add light-weight
wrappers around wcrtomb() and mbrtowc().
While there, also add (non-yet-standard) _l functions, similar to the
ones we already have for the other locale-dependent functions.
Reviewed by: theraven
The pipe2() function is similar to pipe() but allows setting FD_CLOEXEC and
O_NONBLOCK (on both sides) as part of the function.
If p points to two writable ints, pipe2(p, 0) is equivalent to pipe(p).
If the pointer is not valid, behaviour differs: pipe2() writes into the
array from the kernel like socketpair() does, while pipe() writes into the
array from an architecture-specific assembler wrapper.
Reviewed by: kan, kib
By using __has_extension(c_generic_selections), we can explicitly test
whether we're dealing with a version of Clang that supports _Generic().
That way we can use the improved <tgmath.h> code, even when not using
-std=c11. This massively reduces the compilation time when invoking
these functions.
This theoretically allows a compiler to optimize (parts of) the array
away if unused.
While there, make the array size implicit and use a _Static_assert() to
ensure that the definition matches up with the number of elements in the
list.
routines provide write-only stdio FILE objects that store their data in a
dynamically allocated buffer. They are a string builder interface somewhat
akin to a completely dynamic sbuf.
Reviewed by: bde, jilles (earlier versions)
MFC after: 1 month
