support more than one architecture at a time, build as from the
default for the host and if CROSS_TOOLS defines other architectures,
build them as as_${arch}
are now included according to the cross-architecture support required,
default the BINDIR for i386 to /usr/libexec/elf here instead of in
all the i386 specific makefiles. For all other architectures, BINDIR
is just /usr/bin.
be defined (in /etc/make.conf, say) and set to the additional architectures
that need to be compiled in. So on alpha I set CROSS_TOOLS = i386.
On i386 you can't build alpha due to lack of 64-bit support on 32-bit
architectures, but that's a GNU problem.
This change relies on makefiles in the binutils sub-directories having
the extension defined in the CROSS_TOOLS, instead of those makefiles
being selected based on the host architecture.
worked because .ORDER prevented problems from concurrent generation
of multiple parsers (and their headers), and there were no missing
dependencies because the generated headers were not actually used.
with `make -jN' because they did the right things to generate cexp.h
without clobbering cexp.c, and there were no missing dependencies on
cexp.h because cexp.h isn't actually used.
Fixed style bugs.
bsd.man.mk doesn't include ${.CURDIR}/../Makefile.inc.
Removed GDBDIR-redefinition-prevention ifdef. It hasn't done anothing
for a long time, if ever. The directory is defined to the same value in
each subdir and had the same value because all subdirs are at the same
level. Keep defining it in the subdirs since that is more flexible and
no more verbose.
Prepare to inherit BINDIR by including ../Makefile.inc.
requires the new file.
Fixed stale near-copy of contrib/libreadline/doc/hsuser.texinfo. Patch
it at build ntime, and only keep the patch for it here.
Don't keep a copy of contrib/gdb/gdb/doc/all-cfg.texi here. Link to it
at build time.
Fixed stale near-copy of contrib/libreadline/doc/hsuser.texinfo. Patch
it at build ntime, and only keep the patch for it here.
Don't keep a copy of contrib/gdb/gdb/doc/all-cfg.texi here. Link to it
at build time.
$Id$ should be preceded by a tab
Don't include ../Makefile.inc when it is not used explicitly
Use the normal amount of horizontal and vertical whitspace (1 tab/none)
Don't override the (correct) default for MAN1
Use the correct order for -I paths
Use config.h generated by `configure', don't use a huge CFLAGS statement
Enable useage of libreadline in config.h, configure didn't enable it itself.
- Makefiles shouldn't have copyrights.
- $Id$ should be preceded by a tab.
- Don't include ../Makefile.inc when it is not used explicitly.
- Use the normal amount of horizontal and vertical whitspace (1 tab/none).
- Don't override the (correct) default for MAN1.
- Use the correct order for -I paths.
- Don't use += to initialize SUBDIR.
- use the config.h generated by `configure' and don't use a huge
CFLAGS statement.
I think the other Makefiles under src/gnu needs some polishing as well ;-)
Thanks to Bruce, everythig looks smarter now.
Obtained from: Bruce Evans <bde@zeta.org.au>
on bi-parser.h. Not having it sometimes (only with `make -j') triggered
a bug suite that led to ordinary cpp output being put in .depend files.
Various bugs (the main one only with `make -j') prevented timely detection
of failure to build and install gnu/usr.bin/cc. Eventually the missing
${WORLDTMP}/usr/libexec/cpp caused ${WORLDTMP}/usr/bin/cpp to be invoked
by cc, and this version of cpp is not suitable for such invocation.
Ordinary cpp output was put in .depend files when cpp terminated options
processing before seeing the -M flag.
Cleaned up.
magic number byte ordering for FreeBSD. This makes "file" describe
our object files as "FreeBSD/i386 object" instead of as NetBSD
object files. In case this seems drastic and risky, Bruce points
out that the "ld -r -x" step that is done on every object file when
building libraries fixes the byte ordering in the same way. I have
been running with this patch for over a month and have seen no
problems.
With -O3, egcs generates such forward references.
PR: gnu/6055
Reviewed by: jdp
Submitted by: Dmitrij Tejblum <tejblum@arc.hq.cti.ru> in slightly different form
be worth much effort. Install all i386 binutils programs in
"/usr/libexec/elf". Disable a.out support in libbfd. It's too
dangerous to leave it in. Some of the utilities think they can
handle a.out, but they generate bad object files.
These are equivalent to "fildq" and "fistpq" respectively. This
fixes the bad floating point object code that resulted after recent
changes in the compiler.
Test driven by: "Mike Burgett" <mburgett@awen.com>,
Amancio Hasty <hasty@rah.star-gate.com>
last fix of this type. Installing from a read-only object tree should
work now.
Install files using a single install command where this is easy; don't
use shell loops.
Don't use MANDEPEND to complicate things.
fix of putting generated source files in SRCS breaks many special
cases (many dependencies had to be incomplete for ${.ALLSRC}
not to give .h files that would break compiling with c++ -c).
Reduce these special cases to the general case so that SRCS works
normally and bsd.lib.mk handles most of the complications. Now
we only have to duplicate rules from bsd.lib.mk to add special
CFLAGS in some cases.
the source files. E.g., the stale version of locate.cc in the
source directory was sometimes used. We didn't even use beforedepend.
Added temporary files to CLEANFILES.
Fixed some style bugs.
generated source files in SRCS.
Don't use MANDEPEND to complicate things. Just put the generated
man page in CLEANFILES.
Partly fixed yacc header brokenness, as in ../eqn/Makefile.
Added temporary files to CLEANFILES.
Fixed some style bugs.
generated source files in SRCS.
Don't use MANDEPEND to complicate things. Just set MAN1 and put
generated man pages in CLEANFILES.
Added temporary files to CLEANFILES.
Partly fixed a potentially fatal bug involving the yacc header.
We generate eqn.cc (even if there is a version of it in the source
directory older than eqn.y) and a matching eqn.tab.h, but only use
the possibly-non-matching eqn.tab.h in the source directory. This
works because Cygnus's yacc happened to generate a y.tab.h identical
to the current generated one. The correct version will be used
when the wrong version is deleted from the source tree. Kludge to
get the header generated early enough. Yacc headers are mishandled
everywhere they are renamed (and used).
Generate neqn at build time, not at install time.
Fixed some style bugs.
target. .ORDER doesn't work right, but is used for things related
to the depend target. It "works" for the depend target by skipping
the build of .depend when N >= 2 and there is a non-default
beforedepend target with no rules. Recent fixes made almost all
the beforedepend targets in the tree a no-op except for this bug.
Removed vestiges of elf and aout targets.
the binutils headers for (machine)-unknown-freebsdelf.
Also copy the bfd.h header to an architecture specific directory
because there are two fundamental lines that differ (32-bit vs 64-bit)
between i386 and alpha.
The config.h for libbinutils generates the same on alpha as i386,
so I didn't change that (though I was tempted!).
support building it for variant architectures. It was already
becoming clear that the former structure was too rigid and didn't
scale well.
The usual sort of makefile magic arranges to .include an architecture
specific makefile "Makefile.${MACHINE_ARCH}" in each directory
where it exists. Also, sources will be found in each subdirectory
"${MACHINE_ARCH}" that exists. This is all taken care of automatically
by the top level "Makefile.inc0".
This all seems to work right for the i386 now. I have also converted
those alpha pieces already present to the new schema as best I
could.
Also: change the BINDIR on the i386 to /usr/libexec/elf for "ar"
and "ranlib". They are not object format independent enough to
put into /usr/bin.
a.out gas and the binutils gas (elf or a.out) with a single compiler.
This uses other infrastructure not yet committed, in order to support
both a.out and elf it needs to be able to get to both a.out and elf
gas, ld, libs, crt* etc. So for now, the support is pretty much dormant.
The new freebsd.h file is based on the old freebsd-elf.h file (which has a
long lineage, right back through linux and svr4 files). The change is
pretty dramatic from a gcc internals standpoint as it overrides a lot of
definitions in order to generate different output based on target mode.
There is potential for screw-ups, so please be on the lookout - gcc's
configuration mechanism wasn't really meant for this kind of thing.
It's believed to compile world etc just fine under both a.out and elf, can
handle global constructors and destructors, handles the differences in
a.out and elf stabs, and what sections things like exceptions go in.
The initial idea came from i386/osfrose.h which is a dual rose/elf format
target. These two are not as diverse as a.out and elf it would seem.
The cc front-end uses external configuration to determine default object
format (still being thrashed out, so read the source if you want to see
it so far), and has a '-aout' and '-elf' override command line switch.
There are some other internal switches that can be accessed, namely -maout,
-mno-aout, -munderscores and -mnounderscores. The underscore and local
symbol prefixing rules are controllable seperately to the output format.
(ie: it's possible to generate a.out without the _ prefixes on symbols and
also to generate elf with the _ prefixes. This isn't quite optimal, but
does seem to work pretty well, except the linkers don't always recognise
the local symbols without their normal names)
The default format is a.out (still), nobody should see any major changes.
With both elf and a.out tools and libraries installed:
[1:26pm]/tmp-223> cc -elf -o hello hello.c
peter@beast[1:27pm]/tmp-224> file hello
hello: ELF 32-bit LSB executable, Intel 80386, version 1 (FreeBSD), dynamically linked, not stripped
[1:27pm]/tmp-225> ./hello
hello world!
[1:27pm]/tmp-226> cc -aout -o hello hello.c
[1:27pm]/tmp-227> file hello
hello: FreeBSD/i386 compact demand paged dynamically linked executable not stripped
1:27pm]/tmp-228> ./hello
hello world!
Since my co-conspirators put a lot of effort into this too, I'll add them
so they can share the blame^H^H^H^H^Hglory. :-)
Reviewed by: sos, jdp
libraries so that `ld -f' in can create correct dependencies for
yet-to-be-built libraries.
Get the default BINDIR correctly (by including ../Makefile.inc recursively.
objects depend on all generated headers doesn't work because it gives
cyclic dependencies. Give enough dependencies explicitly. We no
longer need to use .SINGLESHELL for `make depend'. .SINGLESHELL was
more of a bottleneck than usual because `make depend' makes everything.
Fixed some spelling and English errors.
