ev6 or pca56 etc this downgrades the cpu specification passed to gas.
As a result, gas will fail when gcc generates media instructions (in
uipc_usrreq.c). This only affects what gas will accept, not what gcc
generates or what our *.s file contain.
TARGET_ARCH and TARGET. This is problematic when one has the =
(unconditional) type of assigment for CPUTYPE in /etc/make.conf.
(This would override what was set on the command line to "make
buildworld".)
Add a (horrible) kludge to Makefile.inc1 to check the type of
assignment for CPUTYPE (only for those who attempts to set it to
a different value). Fix an example make.conf. Fix the kernel's
build-tools target (aicasm only at the moment) to catch up with
bsd.cpu.mk,v 1.15 (BOOTSTRAPPING replaced with NO_CPU_CFLAGS in
Makefile.inc1's BMAKE).
Reviewed by: jhb
bsd.cpu.mk doesn't have to worry about compilers other than the current
version.
- Allow TARGET_CPUTYPE to override CPUTYPE in bsd.cpu.mk.
- Treat an empty CPUTYPE the same as an undefined CPUTYPE.
- For buildworld, buildkernel, etc., define TARGET_CPUTYPE to CPUTYPE for
native builds and define it to be empty for cross-builds.
TARGET_CPUTYPE is only defined if it is not already defined via the
commandline or environment.
- To minimize whitespace changes, remove a test that didn't define
_CPUCFLAGS if both NO_CPU_CFLAGS and NO_CPU_COPTFLAGS were defined
since it is redundant (we don't use _CPUCFLAGS if those are defined).
to tune for more advanced processors while still supporting the minimum
processor in an architecture. We can do this with the '-mtune=' option
to gcc for alpha, sparc64, and powerpc and with the mis-named '-mcpu='
option for i386.
This defaults to tuning i386 builds for i686 machines though not using
any instructions that aren't found on an 80386. For alpha it defaults
to tuning for an EV5.
Approved by: peter
Peril sensitive sunglasses borrowed from: peter
to make it call `install' in the bsd.subdir.mk-driven makefiles
too. (share/examples/Makefile,v 1.29 changed the bsd.prog.mk
to bsd.subdir.mk and many stuff was lost during "make release".
I then merged this change in rev. 1.28.2.2 to work around the
namespace pollution (FILES) in this makefile.)
There was an added complexity here. Both the `distribute' and
`install' targets are recursive (they propagate to SUBDIRs).
So `distribute' first calls `install' in the ${.CURDIR}, then
calls `distribute' in each SUBDIR, etc. The problem is that
`install' (being also recursive) causes the stuff from SUBDIR
to be installed twice, first time thru `install' in ${.CURDIR}
triggered by `distribute', second time by `distribute' run in
the SUBDIR. This problem is not new, but it became apparent
only after I moved the `distribute' target from bsd.obj.mk to
bsd.subdir.mk. My first attempt testing the fix failed due to
this, because the whole world was distributed twice, causing
all the imaginable mess (kerberos5 stuff was installed into both
"base" and "krb5" dists, there was /sbin/init.bak, etc.)
I say the problem is not new because bsd.prog.mk and bsd.lib.mk
makefiles with SUBDIR (even without this fix) had this problem
for years. Try e.g. running ``make distribute DISTDIR=/foo''
from usr.bin/bzip2 or from lib/libcom_err (without the fix) and
watch the output.
So the solution was to make `install' behave non-recursive when
executed by `distribute'. My first attempt in passing SUBDIR=
to the `install' in the `distribute' body failed because of the
way how src/Makefile and src/Makefile.inc1 communicate with each
other. SUBDIR='s assignment precedence on the "make install
SUBDIR=" command line is lowered after src/Makefile wrapper calls
"make ... -f ${.CURDIR}/Makefile.inc1 install" because SUBDIR=
is moved into environment, and Makefile.inc1's assignments now
take higher precedence. This may be fixed someday when we merge
Makefile with Makefile.inc1. For now, this is implemented as a
NO_SUBDIR knob.
Spotted by: Dmitry Pryanishnikov <dmitry@atlantis.dp.ua>
Prodded by: des
MFC after: 3 days
directives to ensure that all realinstall sub-tasks are executed
after beforeinstall, similarly ensure that all afterinstall sub-
tasks are executed after realinstall. Demonstration:
all: task1 task2
.ORDER: task1 task2
task2: task2_subtask
.ORDER: task1 task2_subtask
task1 task2 task2_subtask:
@sleep `jot -r 1 0 1.0`
@echo ${.TARGET}
Without the second .ORDER directive, task2_subtask can be run in
parallel with task1.
Spotted by: Andrea Campi <andrea@webcom.it>
Provided the (previously missing) dependency on source files
for intermediate .msg files.
Provided the default for NLSSRCDIR (defaults to .CURDIR).
Slightly changed the API: NLS should now list plain locale
names, without the .msg suffix.
When included from bsd.prog.mk, NLSNAME defaults to PROG.
and afterinstall targets. Make sure they are run in sequence in the
-j case.
This fixes the recent breakage with beforeinstall being run _after_
realinstall.
Reported by: knu
same set of features as in recently added bsd.incs.mk
(FILESGROUPS, accessibility from both bsd.prog.mk and
bsd.lib.mk, de-pessimized typical installation path,
etc.) New standard targets: buildfiles, installfiles,
and files (buildfiles + installfiles).
back to -fformat-extensions (or whatever) when we have the functionality.
We are gaining warnings again that should be fixed but the are being hidden
by NO_WERROR and all the -Wformat noise.
Rename `incsinstall' to `installincludes'.
Make `includes' a -j safe shortcut for `buildincludes' + `installincludes'.
`buildincludes' and `installincludes' are SUBDIR friendly, if run directly.
Get rid of the INTERNALSTATICLIB knob and just use plain INTERNALLIB.
INTERNALLIB now means to build static library only and don't install
anything. Added a NOINSTALLLIB knob for libpam/modules. To not
build any library at all, just do not set LIB.
via INCS. Implemented INCSLINKS (equivalent to SYMLINKS) to
handle symlinking include files. Allow for multiple groups of
include files to be installed, with the powerful INCSGROUPS knob.
Documentation to follow.
Added standard `includes' and `incsinstall' targets, use them
in Makefile.inc1. Headers from the following makefiles were
not installed before (during `includes' in Makefile.inc1):
kerberos5/lib/libtelnet/Makefile
lib/libbz2/Makefile
lib/libdevinfo/Makefile
lib/libform/Makefile
lib/libisc/Makefile
lib/libmenu/Makefile
lib/libmilter/Makefile
lib/libpanel/Makefile
Replaced all `beforeinstall' targets for installing includes
with the INCS stuff.
Renamed INCDIR to INCSDIR, for consistency with FILES and SCRIPTS,
and for compatibility with NetBSD. Similarly for INCOWN, INCGRP,
and INCMODE.
Consistently use INCLUDEDIR instead of /usr/include.
gnu/lib/libstdc++/Makefile and gnu/lib/libsupc++/Makefile changes
were only lightly tested due to the missing contrib/libstdc++-v3.
I fully tested the pre-WIP_GCC31 version of this patch with the
contrib/libstdc++.295 stuff.
These changes have been tested on i386 with the -DNO_WERROR "make
world" and "make release".
and `maninstall' targets. This fixes the issue where each subdir
was descended into twice during "make all", and also resurrects
the standardization of `maninstall'.
Urged by: bde
in progress, and should not have been committed in revision 1.114.
This broke gnu/usr.bin/binutils/strip and usr.bin/strip makefiles;
they were now attempting to install and strip "strip" from objdir.
Pointed out by: bde
This has nothing to do with PR misc/37516.
Do not install games and profiled libraries to the ${CHROOTDIR}
with the initial installworld.
Eliminate the need in the second installworld. For that, make sure
_everything_ is built in the "world" environment, using the right
tool chain.
Added SUBDIR_OVERRIDE helper stuff to Makefile.inc1. Split the
buildworld process into stages, and skip some stages when
SUBDIR_OVERRIDE is set (used to build crypto, krb4, and krb5
dists).
Added NO_MAKEDB_RUN knob to Makefile.inc1 to avoid running
makewhatis(1) at the end of installworld (used when making crypto,
krb4, and krb5 dists).
In release/scripts/doFS.sh, ensure that the correct boot blocks are
used.
Moved the creation of the "crypto" dist from release.5 to
release.2.
In release.3 and doMFSKERN, build kernels in the "world"
environment. KERNELS now means "additional" kernels, GENERIC is
always built.
Ensure we build crunched binaries in the "world" environment.
Obfuscate release/Makefile some more (WMAKEENV) to achieve this.
Inline createBOOTMFS target.
Use already built GENERIC kernel modules to augment mfsfd's
/stand/modules. GC doMODULES as such.
Assorted fixes:
Get rid of the "afterdistribute" target by moving the single use
of it from sys/Makefile to etc/Makefile's "distribute".
Makefile.inc1: apparently "etc" no longer needs to be last for
"distribute" to succeed.
gnu/usr.bin/perl/library/Makefile.inc: do not override the
"install" and "distribute" targets, do it the "canonical" way.
release/scripts/{man,cat}pages-make.sh: make sure Perl manpages and
catpages appear in the right dists. Note that because Perl does
not respect the MANBUILDCAT (and NOMAN), this results in a loss of
/usr/share/perl/man/cat* empty directories. This will be fixed
soon.
Turn MAKE_KERBEROS4 into a plain boolean variable (if it is set it
means "make KerberosIV"), as documented in the make.conf(5)
manpage. Most of the userland makefiles did not test it for "YES"
anyway.
XXX Should specialized kerberized libpam versions be included into
the krb4 and krb5 dists? (libpam.a would be incorrect anyway if
both krb4 and krb5 dists were choosen.)
Make sure "games" dist is made before "catpages", otherwise games
catpages settle in the wrong dist.
Fast build machine provided by: Igor Kucherenko <kivvy@sunbay.com>
to build kernel and kernel modules so stop supporting them in
bsd.subdir.mk and reimplement them in kern.post.mk and kmod.mk
as special versions of the install and reinstall targets, and
only define them if DEBUG is also defined (when debug versions
are really built).
Prompted by: bde
Ensure all standard targets honor SUBDIR. Now `make obj' descends into
SUBDIRs even if NOOBJ is set (some descendants may still need an object
directory, but we do not have such precedents). Now `make install' in
non-bsd.subdir.mk makefiles runs `afterinstall' target _after_ `install'
in SUBDIRs, like we do in bsd.subdir.mk. Nothing depended on the wrong
order anyway.
Fixed `distribute' targets (except for the bsd.subdir.mk version) so that
they do not depend on _SUBDIR; `distribute' calls `install' which already
depends on _SUBDIR.
De-standardize `maninstall', otherwise manpages would be installed twice.
(To be revised later.)
to use ``.if defined()'' inside bsd.own.mk to test for defines
in individual makefiles. For example, setting DEBUG_FLAGS in
Makefile didn't take the desired effect on the STRIP assignment.
Added bsd.init.mk (like in NetBSD) that handles the inclusion
of ../Makefile.inc and bsd.own.mk from all bsd.*.mk files that
"build something".
Back out bsd.own.mk,v 1.15: moved OBJFORMAT initialization back
to sys.mk (several source tree makefiles want to check it early)
and removed MACHINE_ARCH initialization (it's hard to see from
looking at the commitlogs what the problem was at the time, but
now it serves no purpose).
Prohibit the direct inclusion of bsd.man.mk and bsd.libnames.mk.
Protect bsd.obj.mk from repetitive inclusion. Prohibiting the
direct inclusion of bsd.obj.mk might be a good idea too.
indeed a good change, I shouldn't have made it after testing
with the -DNOCLEAN buildworld. There are far too many users
of this misfeature under sys/boot/. I will reapply the change
after I fix these.
This change has been tested with the clean buildworld.
Make the defined(SRCS) case similar to the !defined(SRCS)
case - only define ${PROG}: ${OBJS} if the ${PROG} target
does not exist. This has only one precedence in the entire
source tree, usr.bin/doscmd, and its Makefile is horribly
broken. I will temporarily unconnect it from build until
I'm working on the fix.
have the __FBSDID() macro in <sys/cdefs.h>. Fix this once and for all
for tools that need to be bootstrapped.
PR: bin/36747
MFC after: 3 days
Prodded by: obrien
the .PATH (but not in the ${.OBJDIR}) would result in a leak of
the ${OBJS}: ${SRCS:M*.h} dependency hint.
Spotted by: fixing the broken gnu/usr.bin/cc/cc1obj build
MFC after: 1 day
(See commit log for usr.bin/xlint/Makefile,v 1.11 for what was wrong
with enabling build of lint libraries in rev. 1.12.)
This fixes cross-arch compiles (running binaries for a different arch
when generating lint.7 and lint libraries) and cross-branch compiles
(4.x -> 5.0 buildworld should be working again).
"env name=value ... cmd ..." was just a pessimized way of doing
"name=value ... cmd ...". Note that make(1) can't optimize
either of these to an exec of env(1) or "cmd" even if the second
"..." is simple, since it can't tell that the shell metacharacter
in "name=value" is actually handled by env(1).
Use this where we are now using /etc/make.conf.
This allows people to override the current default of always including
/etc/make.conf. Setting __MAKE_CONF to /dev/null disables it
completely, while setting it to something else allows one to override
what is on the system. This can be desirable in situations where a
machine has many users and some of them want different defaults, or
defaults appropriate to cross building to be different than those for
normal building.
Not objected to by: arch@
lint, so this is turned off by default. Setting WANT_LINT will turn
on generation of lint libraries for /usr/libdata/lint/*.ln.
Reviewd by: silence in -audit.
to pick up the correct cross-tools (the compiler executables and binutils)
and special linker files (crt*.o). This is now controlled by a single knob,
TOOLS_PREFIX, when building cross-tools.
Fixed regression in Makefile.inc1,v 1.203 (-nostdinc). This clobbered target
architecture's CFLAGS with building host's CPUTYPE setting in /etc/make.conf,
and had a nice but nasty side effect of exposing some (normally hidden) bugs
in system headers.
(Attempt to move the "-nostdinc -I..." part of CFLAGS into the new CINCLUDES
(modeled after a similar CXXINCLUDES) eventually failed because hard-coding
${WORLDTMP}/usr/include to be the first in the include list does not always
work, e.g. lib/libbind.)
Compensate the -nostdinc removal by making cpp(1) built in the cross-tools
stage to not look for <> header files in the building host's /usr/include
(already committed as gnu/usr.bin/cc/cc_tools/freebsd-native.h, revisions
1.10-1.12, STANDARD_INCLUDE_DIR).
: $ /usr/obj/usr/src/i386/usr/bin/cpp -v /dev/null
:
: Before:
:
: #include <...> search starts here:
: /usr/obj/usr/src/i386/usr/include
: /usr/include
: End of search list.
:
: After:
:
: #include <...> search starts here:
: /usr/obj/usr/src/i386/usr/include
: /usr/obj/usr/src/i386/usr/include
(Disabling the use of GCC_INCLUDE_DIR in the FREEBSD_NATIVE case would fix
the duplicate above.)
Get rid of the (now unneeded) -I${DESTDIR}/usr/include magic in bsd.prog.mk
and bsd.lib.mk. Finish the removal of LDDESTDIR in bsd.lib.mk,v 1.55 -- we
no longer have users of it.
The required changes to gcc were already committed as contrib/gcc.295/gcc.c,
revisions 1.23 and 1.24.
Basically, this allows for the changes above plus makes gcc(1) persistent
about path configuration, whether it's configured as a native or a cross
compiler:
: $ /usr/obj/usr/src/i386/usr/bin/cc -print-search-dirs
: install: /usr/obj/usr/src/i386/usr/libexec/(null)
: programs: /usr/obj/usr/src/i386/usr/libexec/elf/:/usr/obj/usr/src/i386/usr/libexec/
: libraries: /usr/obj/usr/src/i386/usr/lib/
:
: $ /usr/obj/alpha/usr/src/i386/usr/bin/cc -print-search-dirs
: install: /usr/obj/alpha/usr/src/i386/usr/libexec/(null)
: programs: /usr/obj/alpha/usr/src/i386/usr/libexec/elf/:/usr/obj/alpha/usr/src/i386/usr/libexec/
: libraries: /usr/obj/alpha/usr/src/i386/usr/lib/
Reviewed by: bde, obrien
- Spam /usr/lib some more by making libssh a standard library.
- Tweak ${LIBPAM} and ${MINUSLPAM}.
- Garbage collect unused libssh_pic.a.
- Add fake -lz dependency to secure/ makefiles needed for
dynamic linkage with -lssh.
Reviewed by: des, markm
Approved by: markm
libraries a little by not passing all of ${CFLAGS} to lint. Pass
only options matching -[DIU]*. The important -nostdinc option can't
be passed like I first thought because lint misinterprets as
"-n -o stdinc". The unimportant -B* option can't be passed because
lint doesn't support it. Otherwise, we pass the same options as
to mkdep, exept for a bug in the latter: -U* is not passed. All
this depends on option args not being separated from option flags
by a space.
Small tweaks to kldxref may be necessary to avoid the surprising (but harm-
less) behaviour of 'kldload foo' loading foo.ko.debug instead of foo.ko if
it is present in the kernel directory.
Approved by: a week of silence on -arch
MFC after: 2 weeks
1. To cross-build, one now needs to set TARGET_ARCH, and not the
MACHINE_ARCH. MACHINE_ARCH should never be changed manually!
2. Initialize DESTDIR= explicitly for bootstrap-tools, build-tools,
and cross-tools stages. This fixes broken header and library
dependencies problem. We build them in the host environment,
and obviously want them to depend on host headers and libraries.
The problem with broken header dependencies for bootstrap-tools
and cross-tools was already partially solved (see BOOTSTRAPPING
tests in bsd.prog.mk and bsd.lib.mk), but it was still there for
build-tools if the user ran "make world DESTDIR=/foo". Also,
for all of these stages, the library dependencies were broken
because of how bsd.libnames.mk define DPADD members.
We still provide a glue to install bootstrap- and cross-tools
under the ${WORLDTMP}.
Removed PATH overrides for bootstrap-, build-, and cross-tools
stages. There is just no reason why we would need to override
it, and the hacks to clean up the ${WORLDTMP} in the -DNOCLEAN
case are no longer needed with fixes from this step.
That is, we now never use ${WORLDTMP} headers and libraries,
and we don't use any ${WORLDTMP} installed binaries during
these stages. Again, these stages depend solely on the host
environment, including compiler, headers, and libraries.
3. Moved "miniperl" back from cross-tools (it has nothing to do
with a cross-compiler) to build-tools where it belongs. The
change from step 1 let to do this. Also, to make this work,
build-tools targets of "cc_tools" and "miniperl" were modified
to call "depend". Here follow the detailed explanations.
There are two categories of build tools, for now. In the first
category there are "cc_tools" and "miniperl". They occupy the
whole (sub)directory, and nothing needs to be done in this
subdirectory later during the "all" stage. They are also
constructed using system makefiles. We must build the .depend
early in the build-tools stage because:
1) They use (and depend on) the host environment.
2) If we don't do this in build-tools, the "depend" stage of
buildworld will do this for us; wrong library and header
dependencies will be recorded (DESTDIR=${WORLDTMP}) and,
what's worse, the "all" stage may then clobber the
build-architecture format tools (that we built in the
build-tools stage) with the target-architecture format
ones, breaking cross build.
In the second category there are all other build-tools. They
share their directory with the "main" module that needs them
in the "all" stage, and they don't show up themselves in the
.depend file. The portion of this fix was already committed
in gnu/usr.bin/cc/cc_tools/Makefile,v 1.52.
4. "libperl" is no longer a build tool, and "miniperl" is the
stand-alone application. I had to make this change because
build-tools and "all" stages share the same object directory.
Without this change, if we cross compile, libperl.a is first
built for the build architecture during the build-tools stage
(for the purposes of immediate linkage with "miniperl").
Later on, the "all" stage sees this library as up-to-date,
and doesn't rebuild it. The effect is that the wrong format
static libperl library is installed with installworld.
5. Fixed "includes" to install secure/lib/libtelnet headers if
required.
Reviewed by: bde
supposed to be edited by the user and didn't define important things,
thus we can just skip it (that's where it differs from the make.conf.local
change).
Submitted by: ru
discussed on the arch@ mailinglist (after repo-copy).
sys.mk will .error if it finds /etc/defaults/make.conf but include
it anyways (this is the same behaviour as with the make.conf.local
removal).
/usr/share/examples/etc/make.conf has BDEFLAGS commented out now,
since it's only an example file.
Adjust all textes that talk about make.conf or defaults/make.conf to
match the new situation.
and MINUSLPAM must be kept in sync with the libraries linked to by libpam
to support static linkage.
Moved libmd to the end of LIBPAM and MINUSLPAM. It was before libopie,
but libopie references it, so static linkage only worked accidentally.
have been fatal since it gave a dependency on a nonexistent file, but it
worked because of an undocumented bugfeature in make(1): missing source
files named *.a are silently assumed to be up to date.
Fixed some style bugs (formatting).
(While there, I also moved the single suffix C rules beside the double
suffix ones so they are easier to find)
PR: 24438
Submitted by: Georg-W. Koltermann <gwk@sgi.com>
to avoid polluting sys.mk. This directive controls the addition of
compiler warning flags to CFLAGS in a relatively compiler-neutral manner.
The idea is that WARNS can be set in Makefile.inc or in individual
Makefiles as they become clean, to prevent the introduction of new
warnings in the code. -Werror is added by default
- the changes that renamed libf2c to libg2c had not reached here
- there were no definitions for LIBDEVINFO, LIBMENU, LIBPANEL, LIBTINFO,
LIBUSB or LIBVGL. LIBUSB was used without it being defined, and
LIBDEVINFO and LIBVGL should have been used.
- the definitions of LIBDESCRYPT, LIBGCC_PIC, LIBGPLUSPLUS, LIBKZHEAD,
LIBKZTAIL, LIBSCRYPT and LIBSCSI were garbage.
Fixed some old bugs:
- LIBC_PIC and LIBCOM_ERR were assigned to using "=" instead of "?=".
- the definition of LIBC_R was disordered.
- LIBFORM was misspelled LIBFORMS (but not actually used).
