modules from src/bin/ls, and handling exec(_PATH_LS,..) as a
special case, very useful in an environment where many users
are given chroot access. "~/etc/{s}pwd.db" files are still
needed if uid/gid->user/group translation is desired.
To enable this it must be compiled with the make variable
FTP_INTERNAL_LS defined, either in /etc/make.conf or the
environment.
ld-specific flags. LDFLAGS is really for ld-related flags for cc,
not for ld, and some flags, e.g., -Bshareable, mean completely
different things to cc and ld. Having the wrong things in LDFLAGS
also broke the standard ${PROG} target. This was kludged around
by using a special rule that depended on LDFLAGS being bogus.
Fixing `make depend' broke the special rule but fixed the standard
rule (except in the DESTDIR case, which was handled more strictly
here than elsewhere).
'sane' standard (not raw) settings before abort/exiting; move
responsibility of setting raw mode for chat-handling out of
chat.c to avoid doing redundant tc{s,g}etattr()s; move DE
pause prior setting standard mode before issue/login prompt to
avoid echoing modem connect strings. Fixed up comment styles
in a couple of places.
Rev 1.16 deraadt:
do not warn about valid options; invalid options correctly quit
Rev 1.15 deraadt:
need not clear options since bad ones cause exit;
provos@ws1.physnet.uni-hamburg.de
Rev 1.14 deraadt:
IPOPT_LSRR/IPOPT_SSRR must exit() due to tcp sequencing; pointed
out by provos@wserver.physnet.uni-hamburg.de. also another 1-char
buffer overflow.
Reviewed by: Peter Wemm
Obtained from: OpenSBD
Rev 1.13 deraadt:
do not warn about valid options; invalid options correctly quit
Rev 1.12 deraadt:
need not clear options since bad ones cause exit;
provos@ws1.physnet.uni-hamburg.de
Rev 1.11 deraadt:
IPOPT_LSRR/IPOPT_SSRR must exit() due to tcp sequencing; pointed
out by provos@wserver.physnet.uni-hamburg.de. also another 1-char
buffer overflow.
Reviewed by: Peter Wemm
Obtained from: OpenSBD
If it is set to a nonempty string, then simply skip any missing
shared libraries. This came up in a discussion long ago as a
potentially useful feature at sysinstall time. For example, an
X11 utility could be used without the X libraries being present,
provided the utility had a mode in which no X functions were actually
called.
- Use MAP_FAILED instead of the constant -1 to indicate
failure (required by POSIX).
- Removed flag arguments of '0' (required by POSIX).
- Fixed code which expected an error return of 0.
- Fixed code which thought any address with the high bit set
was an error.
- Check for failure where no checks were present.
Discussed with: bde
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
nonempty string, then function calls are relocated at program start-up
rather than lazily. This variable is standard on Sun and SVR4 systems.
The dlopen() function now supports both lazy and immediate binding, as
determined by its "mode" argument, which can be either 1 (RTLD_LAZY) or
2 (RTLD_NOW). I will add defines of these symbols to <dlfcn.h> as soon
as I've done a little more checking to make sure they won't cause
collisions or bootstrapping problems that would break "make world".
The "LD_*" environment variables which alter dynamic linker behavior are
now treated as unset if they are set to the empty string. This agrees
with the standard SVR4 conventions for the dynamic linker.
Add a work-around for programs compiled with certain buggy versions of
crt0.o. The buggy versions failed to set the "crt_ldso" member of the
interface structure. This caused certain error messages from the
dynamic linker to begin with "(null)" instead of the pathname of the
dynamic linker.
nonempty string, then function calls are relocated at program start-up
rather than lazily. This variable is standard on Sun and SVR4 systems.
The dlopen() function now supports both lazy and immediate binding, as
determined by its "mode" argument, which can be either 1 (RTLD_LAZY) or
2 (RTLD_NOW). I will add defines of these symbols to <dlfcn.h> as soon
as I've done a little more checking to make sure they won't cause
collisions or bootstrapping problems that would break "make world".
more manageable and convenient referencing by login.conf (login
class database) and (e.g.) login.access.
This is the first of a group of commits which implements the login
class capabilities database.
emitting the initial prompt.
This is useful in a number of circumstances :
- you have (a) stupid modem(s) that assert(s) DCD too soon.
- you have dialin users with stupid diallers and poorly
written chatscripts. (esp. some Winsock diallers)
BSD/OS also has this capability.
Submitted by: damian@cablenet.net (Damian Hamill)
matches what's in ypserv/yp_extern.h (which I changed when I added the
async DNS stuff). The conflict broke the build of rpc.yppasswdd.
Pointed out by: bde
do it themselves. (Some of these programs actually depended on this
beyond compiling the definition of struct ifinfo!) Also fix up some
other #include messes while we're at it.
it is both uneeded and breaks certain lock-step timing in the rexec
protocol.
Yes, an attacker can "relay" connections using this trick, but a properly
configured firewall that would make this sort of subterfuge necessary in the
first place (instead of direct packet spoofing) would also thwart useful
attacks based on this.
succeeded.
Never allow the reverse channel to be to a privileged port.
Cannidate for: 2.1 and 2.2 branches
Reviewed by: pst (with local cleanups)
Submitted by: Cy Shubert <cy@cwsys.cwent.com>
Obtained from: Jaeger <jaeger@dhp.com> via BUGTRAQ
and YP_SECURE flags so that it can properly add them to newly created
maps when needed. This applies only when using the 'standard' method
for map transfers. When using rpc.ypxfrd, the whole map is copied
verbatim, along with any special entries that may be encoded in it.
Also made -Wall a little quieter for ypxfrd_getmap.c.
the main program, report them directly from the dynamic linker and die
there, rather than returning an error message to crt0.o. This enables
the printing of error messages even for old executables, whose version
of crt0.o is not able to print them.
This fix closes PR bin/1869.
The code in crt0.o for printing error messages from the dynamic linker
is no longer used, because of this change. But it must remain, for
backward compatibility with older dynamic linkers.
When an rsh is denied by rshd because the client is lacking appropriate
.rhosts permission, an error message is formatted for syslog which contains
the client's hostname. The hostname portion of the message relies on a pointer
to a field within gethostbyname()'s internal struct hostent which changes state
between when the pointer is initialized and when it is dereferenced to create th
e
message.
Submitted by: skynyrd@opus.cts.cwu.edu
>Description:
/usr/libexec/mail.local runs as root. As such is can fill up a
mailbox on a quota'd filesystem, and keep going... Makes quota's
almost useless in an ISP environment.
Closes: PR#bin/1111
Submitted by: Charles Henrich <henrich@crh.cl.msu.edu>
or rpc.ypxfrd processes on remote systems that aren't bound to reserved
ports. The servers already do reserved port checks on the clients.
Obtained from: scrutinizing the OpenBSD ypxfr sources. (Note that this
applies to the ypserv check only; OpenBSD doesn't have an rpc.ypxfrd.)
password: ask for it, but don't tell that S/key password required.
It looks like non-s/key system from outside.
Additionally tell that s/key required when it is so for normal case
It happens if 1) regular passwords not allowed, 2) skey database
not activated for given user.
Under some rare circumstanes skey_challenge can return empty
diagnostic or even previous buffer, fix it.
opened. After that, the directories are already present, and there is
no point in adding them again. This doesn't fix any bugs; it's just for
efficiency.
since rt_readenv() already takes care of not setting unsafe variables.
This was part of the changes I submitted to Peter and John during the
review which must have gotten missed.
how I managed to get this out of sync, but I did. I guess that's what I
get for directly committing from different machines that I was testing on.
Pointed out by: Paul Traina <pst@freebsd.org>
configurable fallback search paths, as well as new crt interface version.
Also:
- even faster getenv(), get all environment variable settings in a single
pass.
- ldd printf-like format specifications
- minor code cleanups, one vsprintf -> vsnprintf (harmless)
The library search sequence is a little more complete now. Before,
it'd search $LD_LIBRARY_PATH (by opendir/readdir/closedir), then read
the hints file, then read /usr/lib (again by scanning thr directory). It
would then fail if there was no "found" library.
Now, it does LD_LIBRARY_PATH and the hints file the same, but then uses
a longer fallback path. The -R path is fetched from the executable if
specified at build time, the ldconfig path is appended, and /usr/lib is
appended to that. Duplicates are suppressed. This means that simply
placing a new library in /usr/local/lib will work (the same as it did in
/usr/lib) without needing ldconfig -m. It will find it quicker if the
ldconfig is run though.
Similar changes have been made to the NetBSD ld.so, but ours is rather
different now due to John Polstra's speedups and fixes from a while back.
The ldd printf-like format support came direct from NetBSD.
Reviewed by: nate, jdp
with the -R option and store the path in the dynamic header when specified.
The $LD_RUN_PATH environment variable is not checked yet.
While here, split up the code a bit more to enable more selective replacing
of GPL'ed components that are linked with ld.so with others.
Obtained from: NetBSD (mostly, the breakup is my fault)
Reviewed by: Garrett Wollman <wollman@freebsd.org>
Submitted by: Warner Losh <imp@village.org>
Close PR bin/1145:
Add -s flag to tftpd. This enables the so-called secure mode
of tftpd where it chroots to a given directory before allowing access
to the files. In addition, it runs as nobody when in this mode.
Reviewed a long time ago by Bill and Garrett. Apply my patch from the
pr, and close the PR.
for gcc >= 2.5 and no-ops for gcc >= 2.6. Converted to use __dead2
or __pure2 where it wasn't already done, except in math.h where use
of __pure was mostly wrong.
as atomically as possible.
(Immutable targets can't be renamed without opening a window when
neither the source nor the target is immutable. Perhaps there
should be a rename_immutable syscall to do this if unsetting the
immutable flags would work.)
"." means the object directory, so it is just confusing to use it
when nothing is included from the object directory unless the object
directory is also the source directory. It is confusing for "."
not to mean the source directory anyway, so used `-I.'s should be
replaced by `-I${.OBJDIR}'.
Document the new -R (relax paranoia) option.
From NetBSD/Lite2: code and man page cleanups, Kerberos IV hooks
(relax, we're still exportable), and /etc/ftpchroot feature for
semi-anonymous accounts
or addresses other than the requestor's address. This violates the FTP
protocol (hmm...as I write this, I'm going to change this to a run-time var.)
Require login before PASV and RNTO commands.
Close unused PASV ports so they don't hang around forever.
Do not allow file overwrites via rename or STOR when anonymous
(suspenders).
Clean up buffer utilization.
My code, but heavily inspired by Hobbit's changes to wu-ftpd as pointed out
by Mike Prettejohn and Kit Knox.
hash table size from 256 to 1024.
Generate output that looks more like the SunOS mknetid: uses a space
instead of tabs for white space.
Fix typo in comment in hash.h: Groupit -> Groupid.
the Himalayas and become a hermit.)
Import new mknetid program. This replaces the crufty, soon to be defunct
mknetid script packaged with ypserv.
This program parses the group, passwd, hosts and netid databases into
the netid.byname map. Duplicate checking is performed using hash tables.
Testing on my 486DX2/66 with FreeBSD 2.1.0 showed that this program can
process a 30,000-entry passwd database into a netid map (along with
assorted group and hosts information) in about 22 seconds. On my SPARC IPX
with SunOS 4.1.3, it takes about 15 seconds. This compares favorably with
the SunOS mknetid program, which parses the same database(s) in 13 seconds.
(With smaller databases, my program is actually slightly faster. Go
figure.)
which ypxfr links with. (Sorry: left over development bogon.)
Just a reminder: you must rebuild librpcsvc before you build
this program.
Pointed out by: Stephen Hocking
Also generallize the yp_dbwrite functions a little: allow the caller
to specify certain flags. I need this mostly for some changes to
rpc.yppasswdd to allow in-place updates.
Also change Makefile a little to use the same format as ypserv.
been loaded, look for a match by device and inode number if the
traditional pathname comparisons don't find a match. This detects
the case in which a library is requested using two different names
which are really links to the same file, and avoids loading it
twice.
Requested by: peter@freebsd.org
Reviewed by: peter@freebsd.org
- Fix typos in comments in hash.c.
- Remove unneeded and unused member from grouplist struct in hash.h.
(Curiously, the compiler never complained about this even though the
member was of type 'struct grps' which is not defined anywhere in
this program.)
- char ch -> int ch in revnetgroup.c.
- char *argv[0]; -> char *argv[]; also in revnetgroup.c.
- Force the user to specify at least one of the -u or -h flags
and complain if they specify both.
COMPAT_43 cruft. This is supposedly the last core utility that has
been using it! (So now, one should be able to remove this option from
the config files. Be aware that the last officially released xterm
however still requires it.)
The getty has been running now for several weeks on my modem line, so
i feel safe about it.
Obtained from: mostly from the NetBSD vendor-branch
R_NOOVERWRITE flag and process return codes so that we can tell the
difference between a failure due to a duplicate database entry and
failure due to some other error.
descriptions of LD_NO_INTERN_SEARCH and LD_NOSTD_PATH from the manual
page, since they are not supported.
Submitted by: Doug Ambrisko <ambrisko@ambrisko.roble.com>
accepting connections on the FTP port and forking children processes to
handling them. This is lower overhead than spawning ftpd from inetd and
can be a significant win on busy FTP servers. Be sure to disable ftpd in
inetd.conf if you decide to use this option.
These changes are based on similar changes I made to wu-ftpd and have
been in use on wcarchive for several months.
man pages up to mdoc guidelines and fix some minor formatting glitches.
Also fixed a number of man pages to not abuse the .Xr macro to
display functions and path names and a lot of other junk.
- Handle 'empty' maps more gracefully. By empty I mean a valid map that
just happens not to have any entries in it, such as you would get if
you built a map database from an empty file. Previously, trying to
ypxfr such a map would yield an 'NIS map/database error' which is not
the correct behavior.
ypxfr_misc:
- Make sure to free() or xdr_free() dynamically allocated memory in
ypxfr_get_master() as necessary.
It addresses a number of problems that were present in earlier
versions.
The calls to the "init" and "fini" functions of shared libraries
have been reordered, so that they are called in a strictly nested
fashion, as is required for C++ constructors and destructors. In
addition, the "init" functions are called in better order relative
to each other. That makes the system more tolerant of C++ programs
which depend on a library's being initialized before its clients.
The dynamic linker is now more tolerant of shared libraries in
which dependencies on other shared libraries are incompletely
recorded.
Cleanup in the event of errors has been improved throughout the
dynamic linker. A number of memory leaks were eliminated.
The warning message for a shared library whose minor version number
is too old has been clarified.
The code dealing with the "ld.so.hints" file has been cleaned up.
A bug that caused the hints file to be unmapped incompletely has
been fixed. A different bug that could potentially cause the hints
file to be mapped on top of a loaded object has been fixed.
The code that searches for shared libraries has been cleaned up.
The searching is now more compatible with that done by SunOS and
SVR4. Also, some unnecessary and useless searches of both the
hints file and library directories have been eliminated.
Reviewed by: nate@freebsd.org
on a failure, but if we're checking a corrupt map we could also get back
a zero from ypserv without really encountering any actual error. Flag this
condition and generate an meaningful error message.
- Fix transmission of ypxfr_clear to ypserv: error checking was wrong
and we sending YPXFR_YPERR as an error status instead of YPXFR_CLEAR.
- To help avoid a race condition (or at least reduce the likelyhood of
it occuring), use rename() to move a newly transfered map into place
instead of unlink()ing the old one first and then renaming. Da man page
sez that rename should do the unlink() for us. This prevents ypserv
from returning 'no such map in domain' when asked to query a map which
ypxfr has just unlink()ed but not yet replaced.
- Fix a SEGV condition in ypxfr_main.c that reared its ugly head while I
was working on the 'parallel jobs' feature of the new yppush. After we've
completed the map transfer and created a local temporary copy, we check
the order number of the map on ypserv again to make sure it didn't change
while the transfer was in progress (map skew). If for some reason we flat
out fail to get the order number from the server, we flag this as an
error and bail, telling ypxfr_exit() to clean up our temporary files
for us. However, ypxfr_exit() tries to close the database before unkining
it, not realizing that it has already been closed prior to the skew check.
The second attempt to close the database causes a SEGV somewhere inside
the DB code.
(Well, it does on my 2.0.5 machine anyway. I haven't seen anyone modify
the DB library code in ages, so the condition is probably still there.)
To work around this, we deliberately set dbp to NULL after closing the
database and check for the condition in ypxfr_exit(), being careful to
avoid the second close if we see the NULL.
- In yp_dbwrite.c, make yp_open_db_rw() open the database with O_EXLOCK
flag set. This probably won't affect much of anything, but I feel better
having it there.
to the old one, except that it supports an additional option (-p path)
that lets you specify the top level path wiere your NIS maps live.
(ypserv allows you to specify a path like this, so it makes sense that
ypxfr should too. ypserv will automagically pass the -p flag to ypxfr
if you use a path other than /var/yp when you start it.)
This program uses client stub code generated by rpcgen as well as
the yp_dblookup.c module from ypserv.