1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-28 11:57:28 +00:00
Commit Graph

330 Commits

Author SHA1 Message Date
John-Mark Gurney
a2bc81bf7c Make IPsec work with AES-GCM and AES-ICM (aka CTR) in OCF... IPsec
defines the keys differently than NIST does, so we have to muck with
key lengths and nonce/IVs to be standard compliant...

Remove the iv from secasvar as it was unused...

Add a counter protected by a mutex to ensure that the counter for GCM
and ICM will never be repeated..  This is a requirement for security..
I would use atomics, but we don't have a 64bit one on all platforms..

Fix a bug where IPsec was depending upon the OCF to ensure that the
blocksize was always at least 4 bytes to maintain alignment... Move
this logic into IPsec so changes to OCF won't break IPsec...

In one place, espx was always non-NULL, so don't test that it's
non-NULL before doing work..

minor style cleanups...

drop setting key and klen as they were not used...

Enforce that OCF won't pass invalid key lengths to AES that would
panic the machine...

This was has been tested by others too...  I tested this against
NetBSD 6.1.5 using mini-test suite in
https://github.com/jmgurney/ipseccfgs and the only things that don't
pass are keyed md5 and sha1, and 3des-deriv (setkey syntax error),
all other modes listed in setkey's man page...  The nice thing is
that NetBSD uses setkey, so same config files were used on both...

Reviewed by:	gnn
2015-08-04 17:47:11 +00:00
John-Mark Gurney
42e5fcbf2b these are comparing authenticators and need to be constant time...
This could be a side channel attack...  Now that we have a function
for this, use it...

jmgurney/ipsecgcm:	24d704cc and 7f37a14
2015-07-31 00:31:52 +00:00
John-Mark Gurney
817c7ed900 Clean up this header file...
use CTASSERTs now that we have them...

Replace a draft w/ RFC that's over 10 years old.

Note that _AALG and _EALG do not need to match what the IKE daemons
think they should be..  This is part of the KABI...  I decided to
renumber AESCTR, but since we've never had working AESCTR mode, I'm
not really breaking anything..  and it shortens a loop by quite
a bit..

remove SKIPJACK IPsec support...  SKIPJACK never made it out of draft
(in 1999), only has 80bit key, NIST recommended it stop being used
after 2010, and setkey nor any of the IKE daemons I checked supported
it...

jmgurney/ipsecgcm: a357a33, c75808b, e008669, b27b6d6

Reviewed by:	gnn (earlier version)
2015-07-31 00:23:21 +00:00
Ermal Luçi
59959de526 Correct IPSec SA statistic keeping
The IPsec SA statistic keeping is used even for decision making on expiry/rekeying SAs.
When there are multiple transformations being done the statistic keeping might be wrong.

This mostly impacts multiple encapsulations on IPsec since the usual scenario it is not noticed due to the code path not taken.

Differential Revision:	https://reviews.freebsd.org/D3239
Reviewed by:		ae, gnn
Approved by:		gnn(mentor)
2015-07-30 20:56:27 +00:00
John-Mark Gurney
a09a7146a7 RFC4868 section 2.3 requires that the output be half... This fixes
problems that was introduced in r285336...  I have verified that
HMAC-SHA2-256 both ah only and w/ AES-CBC interoperate w/ a NetBSD
6.1.5 vm...

Reviewed by:	gnn
2015-07-29 07:15:16 +00:00
Ermal Luçi
705f4d9c6a IPSEC, remove variable argument function its already due.
Differential Revision:		https://reviews.freebsd.org/D3080
Reviewed by:	gnn, ae
Approved by:	gnn(mentor)
2015-07-21 21:46:24 +00:00
George V. Neville-Neil
0b75d21e18 Summary: Fix LINT build. The names of the new AES modes were not
correctly used under the REGRESSION kernel option.
2015-07-10 02:23:50 +00:00
George V. Neville-Neil
16de9ac1b5 Add support for AES modes to IPSec. These modes work both in software only
mode and with hardware support on systems that have AESNI instructions.

Differential Revision:	D2936
Reviewed by:	jmg, eri, cognet
Sponsored by:	Rubicon Communications (Netgate)
2015-07-09 18:16:35 +00:00
Andrey V. Elsukov
280d77a3bb Fill the port and protocol information in the SADB_ACQUIRE message
in case when security policy has it as required by RFC 2367.

PR:		192774
Differential Revision:	https://reviews.freebsd.org/D2972
MFC after:	1 week
2015-07-06 12:40:31 +00:00
Ermal Luçi
c1fc5e9601 Reduce overhead of IPSEC for traffic generated from host
When IPSEC is enabled on the kernel the forwarding path has an optimization to not enter the code paths
for checking security policies but first checks if there is any security policy active at all.

The patch introduces the same optimization but for traffic generated from the host itself.
This reduces the overhead by 50% on my tests for generated host traffic without and SP active.

Differential Revision:	https://reviews.freebsd.org/D2980
Reviewed by:	ae, gnn
Approved by:	gnn(mentor)
2015-07-03 15:31:56 +00:00
John-Mark Gurney
49672bcc54 drop key_sa_stir_iv as it isn't used...
Reviewed by:	eri, ae
2015-06-11 13:05:37 +00:00
Jung-uk Kim
fd90e2ed54 CALLOUT_MPSAFE has lost its meaning since r141428, i.e., for more than ten
years for head.  However, it is continuously misused as the mpsafe argument
for callout_init(9).  Deprecate the flag and clean up callout_init() calls
to make them more consistent.

Differential Revision:	https://reviews.freebsd.org/D2613
Reviewed by:	jhb
MFC after:	2 weeks
2015-05-22 17:05:21 +00:00
Andrey V. Elsukov
dc4ea824d4 In the reply to SADB_X_SPDGET message use the same sequence number that
was in the request. Some IKE deamons expect it will the same. Linux and
NetBSD also follow this behaviour.

PR:		137309
MFC after:	2 weeks
2015-05-20 11:59:53 +00:00
Andrey V. Elsukov
4ec5fcbe09 Remove unneded mbuf length adjustment, M_PREPEND() already did that.
PR:		139387
MFC after:	1 week
2015-05-19 17:14:27 +00:00
Andrey V. Elsukov
5bae2b34a4 Change SA's state before sending SADB_EXPIRE message. This state will
be reported to keying daemon.

MFC after:	2 weeks
2015-05-19 08:37:03 +00:00
Andrey V. Elsukov
664802113f Teach key_expire() send SADB_EXPIRE message with the SADB_EXT_LIFETIME_HARD
extension header type. The key_flush_sad() now will send SADB_EXPIRE
message when HARD lifetime expires. This is required by RFC 2367 and some
keying daemons rely on these messages. HARD lifetime messages have
precedence over SOFT lifetime messages, so now they will be checked first.
Also now SADB_EXPIRE messages will be send even the SA has not been used,
because keying daemons might want to rekey such SA.

PR:		200282, 200283
Submitted by:	Tobias Brunner <tobias at strongswan dot org>
MFC after:	2 weeks
2015-05-19 08:30:04 +00:00
George V. Neville-Neil
a9b294b433 Summary: Remove spurious, extra, next header comments.
Correct the name of the pad length field.
2015-05-15 18:04:49 +00:00
Andrey V. Elsukov
6508929bc2 Fix the comment. We will not do SPD lookup again, because
ip[6]_ipsec_output() will find PACKET_TAG_IPSEC_OUT_DONE mbuf tag.

Sponsored by:	Yandex LLC
2015-04-28 11:03:47 +00:00
Andrey V. Elsukov
574fde00be Since PFIL can change mbuf pointer, we should update pointers after
calling ipsec_filter().

Sponsored by:	Yandex LLC
2015-04-28 09:29:28 +00:00
Andrey V. Elsukov
a9b9f6b6c6 Make ipsec_in_reject() static. We use ipsec[46]_in_reject() instead.
Sponsored by:	Yandex LLC
2015-04-27 01:12:51 +00:00
Andrey V. Elsukov
3d80e82d60 Fix possible use after free due to security policy deletion.
When we are passing mbuf to IPSec processing via ipsec[46]_process_packet(),
we hold one reference to security policy and release it just after return
from this function. But IPSec processing can be deffered and when we release
reference to security policy after ipsec[46]_process_packet(), user can
delete this security policy from SPDB. And when IPSec processing will be
done, xform's callback function will do access to already freed memory.

To fix this move KEY_FREESP() into callback function. Now IPSec code will
release reference to SP after processing will be finished.

Differential Revision:	https://reviews.freebsd.org/D2324
No objections from:	#network
Sponsored by:	Yandex LLC
2015-04-27 00:55:56 +00:00
Andrey V. Elsukov
962ac6c727 Change ipsec_address() and ipsec_logsastr() functions to take two
additional arguments - buffer and size of this buffer.

ipsec_address() is used to convert sockaddr structure to presentation
format. The IPv6 part of this function returns pointer to the on-stack
buffer and at the moment when it will be used by caller, it becames
invalid. IPv4 version uses 4 static buffers and returns pointer to
new buffer each time when it called. But anyway it is still possible
to get corrupted data when several threads will use this function.

ipsec_logsastr() is used to format string about SA entry. It also
uses static buffer and has the same problem with concurrent threads.

To fix these problems add the buffer pointer and size of this
buffer to arguments. Now each caller will pass buffer and its size
to these functions. Also convert all places where these functions
are used (except disabled code).

And now ipsec_address() uses inet_ntop() function from libkern.

PR:		185996
Differential Revision:	https://reviews.freebsd.org/D2321
Reviewed by:	gnn
Sponsored by:	Yandex LLC
2015-04-18 16:58:33 +00:00
Andrey V. Elsukov
1d3b268c04 Requeue mbuf via netisr when we use IPSec tunnel mode and IPv6.
ipsec6_common_input_cb() uses partial copy of ip6_input() to parse
headers. But this isn't correct, when we use tunnel mode IPSec.

When we stripped outer IPv6 header from the decrypted packet, it
can become IPv4 packet and should be handled by ip_input. Also when
we use tunnel mode IPSec with IPv6 traffic, we should pass decrypted
packet with inner IPv6 header to ip6_input, it will correctly handle
it and also can decide to forward it.

The "skip" variable points to offset where payload starts. In tunnel
mode we reset it to zero after stripping the outer header. So, when
it is zero, we should requeue mbuf via netisr.

Differential Revision:	https://reviews.freebsd.org/D2306
Reviewed by:	adrian, gnn
Sponsored by:	Yandex LLC
2015-04-18 16:51:24 +00:00
Andrey V. Elsukov
1ae800e7a6 Fix handling of scoped IPv6 addresses in IPSec code.
* in ipsec_encap() embed scope zone ids into link-local addresses
  in the new IPv6 header, this helps ip6_output() disambiguate the
  scope;
* teach key_ismyaddr6() use in6_localip(). in6_localip() is less
  strict than key_sockaddrcmp(). It doesn't compare all fileds of
  struct sockaddr_in6, but it is faster and it should be safe,
  because all SA's data was checked for correctness. Also, since
  IPv6 link-local addresses in the &V_in6_ifaddrhead are stored in
  kernel-internal form, we need to embed scope zone id from SA into
  the address before calling in6_localip.
* in ipsec_common_input() take scope zone id embedded in the address
  and use it to initialize sin6_scope_id, then use this sockaddr
  structure to lookup SA, because we keep addresses in the SADB without
  embedded scope zone id.

Differential Revision:	https://reviews.freebsd.org/D2304
Reviewed by:	gnn
Sponsored by:	Yandex LLC
2015-04-18 16:46:31 +00:00
Andrey V. Elsukov
61f376155d Remove xform_ipip.c and code related to XF_IP4.
The only thing is used from this code is ipip_output() function, that does
IPIP encapsulation. Other parts of XF_IP4 code were removed in r275133.
Also it isn't possible to configure the use of XF_IP4, nor from userland
via setkey(8), nor from the kernel.

Simplify the ipip_output() function and rename it to ipsec_encap().
* move IP_DF handling from ipsec4_process_packet() into ipsec_encap();
* since ipsec_encap() called from ipsec[64]_process_packet(), it
  is safe to assume that mbuf is contiguous at least to IP header
  for used IP version. Remove all unneeded m_pullup(), m_copydata
  and related checks.
* use V_ip_defttl and V_ip6_defhlim for outer headers;
* use V_ip4_ipsec_ecn and V_ip6_ipsec_ecn for outer headers;
* move all diagnostic messages to the ipsec_encap() callers;
* simplify handling of ipsec_encap() results: if it returns non zero
  value, print diagnostic message and free mbuf.
* some style(9) fixes.

Differential Revision:	https://reviews.freebsd.org/D2303
Reviewed by:	glebius
Sponsored by:	Yandex LLC
2015-04-18 16:38:45 +00:00
Gleb Smirnoff
6d947416cc o Use new function ip_fillid() in all places throughout the kernel,
where we want to create a new IP datagram.
o Add support for RFC6864, which allows to set IP ID for atomic IP
  datagrams to any value, to improve performance. The behaviour is
  controlled by net.inet.ip.rfc6864 sysctl knob, which is enabled by
  default.
o In case if we generate IP ID, use counter(9) to improve performance.
o Gather all code related to IP ID into ip_id.c.

Differential Revision:		https://reviews.freebsd.org/D2177
Reviewed by:			adrian, cy, rpaulo
Tested by:			Emeric POUPON <emeric.poupon stormshield.eu>
Sponsored by:			Netflix
Sponsored by:			Nginx, Inc.
Relnotes:			yes
2015-04-01 22:26:39 +00:00
Andrey V. Elsukov
ba76ce40b4 Remove extra '&'. sin6 is already a pointer.
PR:		195011
MFC after:	1 week
2015-03-07 18:44:52 +00:00
Andrey V. Elsukov
47568136c5 Fix possible memory leak and several races in the IPsec policy management
code.

Resurrect the state field in the struct secpolicy, it has
IPSEC_SPSTATE_ALIVE value when security policy linked in the chain,
and IPSEC_SPSTATE_DEAD value in all other cases. This field protects
from trying to unlink one security policy several times from the different
threads.

Take additional reference in the key_flush_spd() to be sure that policy
won't be freed from the different thread while we are sending SPDEXPIRE message.

Add KEY_FREESP() call to the key_unlink() to release additional reference
that we take when use key_getsp*() functions.

Differential Revision:	https://reviews.freebsd.org/D1914
Tested by:		Emeric POUPON <emeric.poupon at stormshield dot eu>
Reviewed by:	hrs
Sponsored by:	Yandex LLC
2015-02-24 10:35:07 +00:00
Andrey V. Elsukov
b489a49fc0 key_spdget uses key_setdumpsp() without SPTREE_RLOCK held (it uses
referenced pointer to sp). Remove SPTREE_RLOCK_ASSERT from
key_setdumpsp() to fix wrong assertion.

Reported by:	Emeric POUPON
Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2015-01-27 17:46:55 +00:00
Robert Watson
2a8c860fe3 In order to reduce use of M_EXT outside of the mbuf allocator and
socket-buffer implementations, introduce a return value for MCLGET()
(and m_cljget() that underlies it) to allow the caller to avoid testing
M_EXT itself.  Update all callers to use the return value.

With this change, very few network device drivers remain aware of
M_EXT; the primary exceptions lie in mbuf-chain pretty printers for
debugging, and in a few cases, custom mbuf and cluster allocation
implementations.

NB: This is a difficult-to-test change as it touches many drivers for
which I don't have physical devices.  Instead we've gone for intensive
review, but further post-commit review would definitely be appreciated
to spot errors where changes could not easily be made mechanically,
but were largely mechanical in nature.

Differential Revision:	https://reviews.freebsd.org/D1440
Reviewed by:	adrian, bz, gnn
Sponsored by:	EMC / Isilon Storage Division
2015-01-06 12:59:37 +00:00
Andrey V. Elsukov
fe07a9d08f Fix VIMAGE build. 2014-12-25 13:38:51 +00:00
Andrey V. Elsukov
93201211e9 Rename ip4_def_policy variable to def_policy. It is used by both IPv4 and
IPv6. Initialize it only once in def_policy_init(). Remove its
initialization from key_init() and make it static.

Remove several fields from struct secpolicy:
* lock - it isn't so useful having mutex in the structure, but the only
  thing we do with it is initialization and destroying.
* state - it has only two values - DEAD and ALIVE. Instead of take a lock
  and change the state to DEAD, then take lock again in GC function and
  delete policy from the chain - keep in the chain only ALIVE policies.
* scangen - it was used in GC function to protect from sending several
  SADB_SPDEXPIRE messages for one SPD entry. Now we don't keep DEAD entries
  in the chain and there is no need to have scangen variable.

Use TAILQ to implement SPD entries chain. Use rmlock to protect access
to SPD entries chain. Protect all SP lookup with RLOCK, and use WLOCK
when we are inserting (or removing) SP entry in the chain.

Instead of using pattern "LOCK(); refcnt++; UNLOCK();", use refcount(9)
API to implement refcounting in SPD. Merge code from key_delsp() and
_key_delsp() into _key_freesp(). And use KEY_FREESP() macro in all cases
when we want to release reference or just delete SP entry.

Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2014-12-24 18:34:56 +00:00
Andrey V. Elsukov
a91150da31 Treat errors when retrieving security policy as policy violation.
Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2014-12-11 18:46:11 +00:00
Andrey V. Elsukov
e65ada3e3c Initialize error variable.
Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2014-12-11 18:40:56 +00:00
Andrey V. Elsukov
0275b2e369 Remove flag/flags argument from the following functions:
ipsec_getpolicybyaddr()
 ipsec4_checkpolicy()
 ip_ipsec_output()
 ip6_ipsec_output()

The only flag used here was IP_FORWARDING.

Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2014-12-11 18:35:34 +00:00
Andrey V. Elsukov
619764beab Remove flags and tunalready arguments from ipsec4_process_packet()
and make its prototype similar to ipsec6_process_packet.
The flags argument isn't used here, tunalready is always zero.

Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2014-12-11 17:34:49 +00:00
Andrey V. Elsukov
f0514a8b8a Remove now unused mtag argument from ipsec*_common_input_cb.
Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2014-12-11 17:14:49 +00:00
Andrey V. Elsukov
08537f4526 Remove code related to PACKET_TAG_IPSEC_IN_CRYPTO_DONE mbuf tag.
It isn't used in FreeBSD.

Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2014-12-11 17:07:21 +00:00
Andrey V. Elsukov
566cbcc82a Remove unused mtag variable.
Obtained from:	Yandex LLC
Sponsored by:	Yandex LLC
2014-12-11 17:01:53 +00:00
Andrey V. Elsukov
4268212124 key_getspacq() returns holding the spacq_lock. Unlock it in all cases.
MFC after:	1 week
Sponsored by:	Yandex LLC
2014-12-07 06:47:00 +00:00
Andrey V. Elsukov
3d6aff5615 Fix style(9) and remove m_freem(NULL).
Add XXX comment, it looks incorrect, because m_pkthdr.len is already
incremented by M_PREPEND().

Sponsored by:	Yandex LLC
2014-12-04 05:02:12 +00:00
Andrey V. Elsukov
18961126cb Remove __P() macro.
Suggested by:	kevlo
Sponsored by:	Yandex LLC
2014-12-03 04:08:41 +00:00
Andrey V. Elsukov
2e84e6eac9 ANSIfy function declarations.
Sponsored by:	Yandex LLC
2014-12-03 03:50:54 +00:00
Andrey V. Elsukov
bd766f3425 Remove unneded check. No need to do m_pullup to the size that we prepended.
Sponsored by:	Yandex LLC
2014-12-02 05:28:40 +00:00
Andrey V. Elsukov
2d957916ef Remove route chaching support from ipsec code. It isn't used for some time.
* remove sa_route_union declaration and route_cache member from struct secashead;
* remove key_sa_routechange() call from ICMP and ICMPv6 code;
* simplify ip_ipsec_mtu();
* remove #include <net/route.h>;

Sponsored by:	Yandex LLC
2014-12-02 04:20:50 +00:00
Andrey V. Elsukov
1fea1b0889 Remove unused structure declarations.
Sponsored by:	Yandex LLC
2014-12-02 02:41:44 +00:00
Andrey V. Elsukov
0e23cc372d Remove unused declartations.
Sponsored by:	Yandex LLC
2014-12-02 02:32:28 +00:00
Andrey V. Elsukov
ffbf9cdeb6 Remove ip4_input() declaration. It was removed in r275133.
MFC after:	1 month
2014-11-27 00:27:39 +00:00
Andrey V. Elsukov
b05765d75f Do not use xform_ipip as decapsulation fallback.
xform_ipip was used as fallback with low priority for IPIP
encapsulated packets that were decrypted. In some cases
it can decapsulate packets, that it shouldn't. This leads to situations,
when wrong configurations are magically working. Also it can propagate
wrong ingress interface and this can break security.

Now we redesigned the IPSEC code and IPIP encapsulation is called directly
from ipsec_output, and decapsulation is done in the ipsec_input with m_striphdr.

Differential Revision:	https://reviews.freebsd.org/D1220
MFC after:	1 month
Sponsored by:	Yandex LLC
2014-11-26 17:44:49 +00:00
Andrey V. Elsukov
f9d8f66552 Count statistics for the specific address family.
MFC after:	1 week
Sponsored by:	Yandex LLC
2014-11-13 12:58:33 +00:00