(which should be a PCIE Gen 3 slot for this adapter) by looking back thru the PCI
parent devices to the slot device.
The fix above also corrects the bandwidth display to GT/s rather than the
incorrect Gb/s
Next, allow the use of ALTQ if you select the compile option IXGBE_LEGACY_TX.
Allow the use of 'unsupported' optic modules by a compile option as well.
Add a phy reset capability into the stop code, this is so a static configured
driver will still behave properly when taken down (not being able to unload it).
This revision synchronizes the shared code with Intel internal current code,
and note that it now includes DCB supporting code, this was necessitated by
some internal changes with the code, but it also will provide the opportunity
to develop this feature in the core driver down the road.
I have edited the README to get rid of some of the worse anachronisms in it
as well, its by no means as robust as I might wish at this point however.
Oh, I also have included some conditional stuff in the code so it will be
compatible in both the 9.X and 10 environments.
Performance has been a focus in recent changes and I believe this revision
driver will perform very well in most workloads.
MFC after: 2 weeks
stops updating the vertical retrace indicator. The text mouse
renderer in syscons is executing from the callout and spins waiting
for the start of next frame. As result, after the X server finishes,
since the VGA cannot be turned on, but syscons does not know about
this, the clock swi spins forever.
Hack around the problem by disabling wait for the retrace if KMS is
activated.
Diagnosed and tested by: Michiel Boland <boland37@xs4all.nl>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
thread might fault on the same GTT offset meantime and instantiate the
mapping. Recheck that the mgt device object still does not have a
page at the current offset after relocking, and return a possibly
installed page.
Reported by: Oleg Sidorkin <osidorkin@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
to a memory-mapped file in the traced process's address space
even if neither the traced process nor the tracing process had
write access to that file.
Security: CVE-2013-2171
Security: FreeBSD-SA-13:06.mmap
Approved by: so
performance.
- Always free to the alloc bucket if there is space. This gives LIFO
allocation order to improve hot-cache performance. This also allows
for zones with a single bucket per-cpu rather than a pair if the entire
working set fits in one bucket.
- Enable per-cpu caches of buckets. To prevent recursive bucket
allocation one bucket zone still has per-cpu caches disabled.
- Pick the initial bucket size based on a table driven maximum size
per-bucket rather than the number of items per-page. This gives
more sane initial sizes.
- Only grow the bucket size when we face contention on the zone lock, this
causes bucket sizes to grow more slowly.
- Adjust the number of items per-bucket to account for the header space.
This packs the buckets more efficiently per-page while making them
not quite powers of two.
- Eliminate the per-zone free bucket list. Always return buckets back
to the bucket zone. This ensures that as zones grow into larger
bucket sizes they eventually discard the smaller sizes. It persists
fewer buckets in the system. The locking is slightly trickier.
- Only switch buckets in zalloc, not zfree, this eliminates pathological
cases where we ping-pong between two buckets.
- Ensure that the thread that fills a new bucket gets to allocate from
it to give a better upper bound on allocation time.
Sponsored by: EMC / Isilon Storage Division
optionally start the traversal from a previously found element by passing the
element in as "var". Passing a NULL "var" retains the same semantics as the
regular FOREACH macros.
Kudos to phk for suggesting the "FROM" suffix instead of my original proposal.
Reviewed by: jhb (previous version), rpaulo
MFC after: 1 week
inactive when upper layer tries to transmit packet. This
gives better feedback and meaningful errors for applications.
MFC after: 2 weeks
Reviewed by: thompsa
star for me. EVENTHANDLER_DEREGISTER() attempts to acquire the lock which is
held by the event handler framework while executing event handler functions,
leading to deadlock.
Move EVENTHANDLER_DEREGISTER() to alq_load_handler() and thus deregister the ALQ
shutdown_pre_sync handler at module unload time, which takes care of the
originally reported panic and fixes the deadlock introduced in r250951.
Reported by: Luiz Otavio O Souza
MFC after: 3 days
X-MFC with: 250951
needed for the last 10 years. Far too much of the internal API is
exposed, and every small adjustment causes applications to stop working.
To kick this off, bump the API version to 0x17 as should have been done
with r246713, but add shims to compensate. Thanks to the shims, there
should be no visible change in application behavior.
I have plans to do a significant overhaul of the API to harnen it for
the future, but until then, I welcome others to add shims for older
versions of the API.
Obtained from: Netflix
backing memory that is only a container for per-cpu caches of arbitrary
pointer items. These zones have no kegs.
- Convert the regular keg based allocator to use the new import/release
functions.
- Move some stats to be atomics since they would require excessive zone
locking/unlocking with the new import/release paradigm. Make
zone_free_item simpler now that callers can manage more stats.
- Check for these cache-only zones in the public APIs and debugging
code by checking zone_first_keg() against NULL.
Sponsored by: EMC / Isilong Storage Division
In the ext2fs driver we have a mixture of headers:
- The ext2_ prefixed headers have strong influence from NetBSD
and are carry specific ext2/3/4 information.
- The unprefixed headers are inspired on UFS and carry implementation
specific information.
Do some small adjustments so that the information is easier to
find coming from either UFS or the NetBSD implementation.
MFC after: 3 days
That way _Atomic() is defined next to all the other C11 keywords for
which we provide compatibility for pre-C11 compilers. While there, fix
the definition to place "volatile" at the end. Otherwise pointer types
will become "volatile T *" instead of "T * volatile".
In order to get some coverage of C11 atomics in kernelspace, switch at
least one piece of code in kernelspace to use C11 atomics instead of
<machine/atomic.h>.
While there, slightly improve the code by adding an assertion to prevent
the use count from going negative.
ensure all per-vnet related hhook initialisation is completed prior to any
virtualised hhook points attempting registration.
vnet_register_sysinit() requires that a stage later than SI_SUB_VNET be chosen.
There are no per-vnet initialisors in the source tree at this time which run
earlier than SI_SUB_INIT_IF. A quick audit of non-virtualised SYSINITs indicates
there are no subsystems pre SI_SUB_MBUF that would likely be interested in
registering a virtualised hhook point.
Settle on SI_SUB_MBUF as hhook's per-vnet initialisation stage as it's the first
overtly network-related initilisation stage to run after SI_SUB_VNET. If a
subsystem that initialises earlier than SI_SUB_MBUF ends up wanting to register
virtualised hhook points in future, hhook's use of SI_SUB_MBUF will need to be
revisited and would probably warrant creating a dedicated SI_SUB_HHOOK which
runs immediately after SI_SUB_VNET.
MFC after: 1 week
The atomic_load() and atomic_store() macros conflict with the equally
named macros from <stdatomic.h>. Remove them, as they are only used to
implement functions that are not present on any of the other
architectures.
Provide both __sync_*-style and __atomic_*-style functions that perform
the atomic operations on ARMv5 by using Restartable Atomic Sequences.
While there, clean up some pieces of code where it's sufficient to use
regular uint32_t to store register contents and don't need full reg_t's.
Also sync this back to the MIPS code.
hook functions into hhook points which register after the modules were loaded -
potentially useful during boot or if hhook points are dynamically registered.
MFC after: 1 week
only re-enable I/O when all reasons have cleared.
sys/dev/xen/blkfront/block.h:
In the block front driver softc, replace the boolean
XBDF_FROZEN flag with a count of commands and driver global
issues that freeze the I/O queue. So long xbd_qfrozen_cnt
is non-zero, I/O is halted.
Add flags to xbd_flags for tracking grant table entry and
free command resource shortages. Each of these classes can
increment xbd_qfrozen_cnt at most once.
Add a command flag (XBDCF_ASYNC_MAPPING) that is set whenever
the initial mapping attempt of a command fails with EINPROGRESS.
sys/dev/xen/blkfront/blkfront.c:
In xbd_queue_cb(), use new XBDCF_ASYNC_MAPPING flag to definitively
know if an async bus dmamap load has occurred.
Add xbd_freeze() and xbd_thaw() helper methods for managing
xbd_qfrozen_cnt and use them to implement all queue freezing logic.
Add missing "thaw" to restart I/O processing once grant references
become available.
Sponsored by: Spectra Logic Corporation
hhook_{add|remove}_hook_lookup() so that khelp (and other potential API
consumers) do not have to care when they attempt to (un)hook a particular hook
point identified by id and type.
Reviewed by: scottl
MFC after: 1 week
QEMU 1.4 made the descriptor requirement stricter - the size of buffer
descriptor must exactly match the number of MAC addresses provided.
PR: kern/178955
MFC after: 5 days
Move FreeBSD from interface version 0x00030204 to 0x00030208.
Updates are required to our grant table implementation before we
can bump this further.
sys/xen/hvm.h:
Replace the implementation of hvm_get_parameter(), formerly located
in sys/xen/interface/hvm/params.h. Linux has a similar file which
primarily stores this function.
sys/xen/xenstore/xenstore.c:
Include new xen/hvm.h header file to get hvm_get_parameter().
sys/amd64/include/xen/xen-os.h:
sys/i386/include/xen/xen-os.h:
Correctly protect function definition and variables from being
included into assembly files in xen-os.h
Xen memory barriers are now prefixed with "xen_" to avoid conflicts
with OS native primatives. Define Xen memory barriers in terms of
the native FreeBSD primatives.
Sponsored by: Spectra Logic Corporation
Reviewed by: Roger Pau Monné
Tested by: Roger Pau Monné
Obtained from: Roger Pau Monné (bug fixes)
KASSERT during TCP hhook registration at boot. Virtualised hook points only
require extra housekeeping and sanity checking when "options VIMAGE" is present.
Reported by: bdrewery,jh,dhw
Tested by: dhw
MFC after: 1 week
X-MFC with: 251732
scheme for defining inline command queuing functions.
Prefer enums to #defines.
sys/dev/xen/blkfront/block.h
Replace inline function generation performed by the
XBDQ_COMMAND_QUEUE() macro with single instances of each
inline function (init, enqueue, dequeue, remove). This was
made possible by using queue indexes instead of bit flags
in the command structure, and passing the index enum as
an argument to the functions.
Improve panic/assert messages in the queue functions.
Combine queue data and stats into a single data structure
and declare an array of them instead of each queue individually.
Convert command flags, softc state, and softc flags to enums.
sys/dev/xen/blkfront/blkfront.c
Mechanical adjustments for new queue api.
Sponsored by: Spectra Logic Corporation
MFC after: 1 week
This hasn't yet been tested as unfortunately the AR3012 I have doesn't
have the "real" firmware on it; it shipped with the cut down HCI firmware
that only understands enough to accept a new firmware image.
* Linux ath9k (GPIO constants)
NICs which have bluetooth coexistence enabled.
The WB225 NIC has the common antenna switch configuration set to 0x0 which
disables all external switch bit setting. This obviously won't work when
doing coexistence.
This value is a magic value from the windows .inf files. It _looks_ right
but I haven't yet verified it - unfortunately my AR9285+AR3012 BT combo
has an earlier BT device which doesn't actually _have_ firmware on it.
So I have to fix ath3kfw to handle loading in firmware into the newer
NICs before I can finish testing this.
This may not hold true for CUS198, which is another custom AR9485 board.
The bluetooth setup code actually does a channel lookup during setup,
even though we haven't yet programmed in a channel. Sigh.
Tested:
* WB225 (AR9485) + bluetooth
generic mii_phy_reset().
- Return the result of mii_mediachg() rather than blindly returning 0.
- on smsc(4), driver lock should be held to get current
mii_media_active/mii_media_status value.
Reviewed by: yongari
