binaries in /bin and /sbin installed in /lib. Only the versioned files
reside in /lib, the .so symlink continues to live /usr/lib so the
toolchain doesn't need to be modified.
idea after all.
Fix cross-builds and ia64 builds. gnu/lib/csu/Makefile is modified to
pre-include osreldate.h and gnu/usr.bin/cc/cc_tools/auto-host.h
will avoid including sys/param.h if __FreeBSD_version is already defined.
shared library being built for amd64. The problem is that libstdc++.so
is produced with 'cc -shared'. This has an internal -lgcc, which is
not PIC. libstdc++.so uses exceptions and the dwarf2 unwinder, which
are in libgcc.a. As a result, non-PIC code gets pulled into libstdc++.so.
This is fatal on amd64 when certain relocation types cannot be used in
PIC mode. The official FSF solution to this is to have libgcc.so with
internal ELF symbol versioning to solve the ABI problem, but I dont want
to fight that battle yet. I tried making libgcc_pic.a (which worked
fine), but thats not something for the 11th hour before a release.
Approved by: re (amd64 "safe" stuff)
not to blindly undef isnan() and other functions that became macros in C99.
Enable use of newly grown C99 functions: strtof(), strtold(), wcstof()
Submitted by: das
shared object of libobjc, we end up linking in from the archive
version. This is wrong, because we don't compile the archive version
suitable for inclusion in shared objects. On ia64 this causes actual
breakages. Compile the archive version with PIC on ia64 to avoid
the breakage there and also to avoid changing the status quo on
other architectures. If other architectures have the same problem,
we probably should start building a shared library. There's no
indication however that other architectures actually need it.
Building the archive version with PIC on ia64 does pessimize linking
complete binaries (ie fully archive), but we don't use Objective-C
ourselves and so far I haven't seen non-shared executables written
in Objective-C, so I'm sure this will be nothing but academic.
Trigger case: ports/lang/gnustep-base
under way to move the remnants of the a.out toolchain to ports. As the
comment in src/Makefile said, this stuff is deprecated and one should not
expect this to remain beyond 4.0-REL. It has already lasted WAY beyond
that.
Notable exceptions:
gcc - I have not touched the a.out generation stuff there.
ldd/ldconfig - still have some code to interface with a.out rtld.
old as/ld/etc - I have not removed these yet, pending their move to ports.
some includes - necessary for ldd/ldconfig for now.
Tested on: i386 (extensively), alpha
to work at least for the non-hairy stuff. The main wrinkle here is that
a whole mess of include files get installed and under different names.
An earlier version of this built a shadow include tree first in the obj
directory, but this depends on the 'make includes' functionality.
More tweaking is certainly going to be needed.
sparc64 looked for the nonexistent sparc64/lb1spc.asm file instead
of the sparc/lb1spc.asm file.
arm probably looked for arm/arm/lib1funcs.asm instead of arm/lib1funcs.asm
ia64 probably looked for ia64/ia64/lib1funcs.asm instead of ia64/lib1funcs.asm
i386 and alpha don't seen to use the LIB1ASMSRC.
later. Otherwise make will try and build the supposedly assembler .o
files from libgcc2.c - which does not work too well (the .o's have no
content)
Reviewed by: obrien
again. Try and deal with platforms that provide their own crtbegin/end asm
files (ia64 for example). crtstuff.c does not actually work on ia64 since
libgcc.a doesn't have a few key support functions when built on ia64 so it
is compulsory to use crtbegin.asm and crtend.asm.
Reviewed by: obrien
Get rid of the INTERNALSTATICLIB knob and just use plain INTERNALLIB.
INTERNALLIB now means to build static library only and don't install
anything. Added a NOINSTALLLIB knob for libpam/modules. To not
build any library at all, just do not set LIB.
via INCS. Implemented INCSLINKS (equivalent to SYMLINKS) to
handle symlinking include files. Allow for multiple groups of
include files to be installed, with the powerful INCSGROUPS knob.
Documentation to follow.
Added standard `includes' and `incsinstall' targets, use them
in Makefile.inc1. Headers from the following makefiles were
not installed before (during `includes' in Makefile.inc1):
kerberos5/lib/libtelnet/Makefile
lib/libbz2/Makefile
lib/libdevinfo/Makefile
lib/libform/Makefile
lib/libisc/Makefile
lib/libmenu/Makefile
lib/libmilter/Makefile
lib/libpanel/Makefile
Replaced all `beforeinstall' targets for installing includes
with the INCS stuff.
Renamed INCDIR to INCSDIR, for consistency with FILES and SCRIPTS,
and for compatibility with NetBSD. Similarly for INCOWN, INCGRP,
and INCMODE.
Consistently use INCLUDEDIR instead of /usr/include.
gnu/lib/libstdc++/Makefile and gnu/lib/libsupc++/Makefile changes
were only lightly tested due to the missing contrib/libstdc++-v3.
I fully tested the pre-WIP_GCC31 version of this patch with the
contrib/libstdc++.295 stuff.
These changes have been tested on i386 with the -DNO_WERROR "make
world" and "make release".
We now fake out the native libgcc.mk + GNU autoconf'ed Makefile.
This gives us the flexability we will need to support our new arches
(StrongARM, Sparc64, PowerPC, and IA-64). If this new way proves to
be too much a hassle, I still have a close-to-being-finished version
that is more like the 2.95 version of this file.
the components and trigger actions based on its position. This reduces
the need to remember the functions of various keys, and makes the
interface more consistant across library.
~
I have held this back for over a year, as we will always have to wrestle
with the question of "*which* libiberty sources to use". Sigh, if only
the GNU people would treat it as a totally separate library from GCC, et al.
and release it as such...
non-threaded programs. This provides threaded programs with the
needed exception frame symbols.
parts submitted by: Max Khon <fjoe@iclub.nsu.ru>
PR: 23252
present questinos with a different default answer. Somebody submitted
a patch to me once which did something this but I lost it (my bad) so
I'm just going to re-implement it with thanks to whomever it was who
gave me the idea.
when using the egcs and gcc-devel ports, along with GCC built from stock
public FSF sources. With out this change, FreeBSD will be removed from
the list of systems GCC 3.0 must be evaluated on before release. With
the effort some of us put into getting FreeBSD on this list, we should
not turn this effort into a waste, else we might not be worth fighting
for in the future. (note that Alpha and IA-64 versions of crt{i,n}.S
are needed)
* Switch from our own crt{begin,in} to those created from GCC's crtstuff.c.
This will allow us to switch to DWARF2 exceptions in the future, along with
staying in sync with any future GCC requirements.
* Break out our ELF branding bits into a seperate file. Currently this
is now included by our crt1.c files (since this functionality was part of
our native crtbegin.c). Later crtbrand.o will be merged in the creation
of crti.o.
I smite thee, vile buildworld breakage!
The story is that these were added to beforeinstall improperly. In our
beforeinstall, a full mtree has not been populated. Since the tree is
not populated, we explode from missing directories on doc install. It
should not be done in beforeinstall (includes) anyway.
${LIB} was wrong at dependency-parsing time, so dependencies for
libgcc_r*.a were wrong. This somehow worked right, except libgcc_r*.a
were always out of date.
-----------------------------
Most of the userland changes are in libc. For both the alpha
and the i386 setjmp has been changed to accomodate for the
new sigset_t. Internally, libc is mostly rewritten to use the
new syscalls. The exception is in compat-43/sigcompat.c
The POSIX thread library has also been rewritten to use the
new sigset_t. Except, that it currently only handles NSIG
signals instead of the maximum _SIG_MAXSIG. This should not
be a problem because current applications don't use any
signals higher than NSIG.
There are version bumps for the following libraries:
libdialog
libreadline
libc
libc_r
libedit
libftpio
libss
These libraries either a) have one of the modified structures
visible in the interface, or b) use sigset_t internally and
may cause breakage if new binaries are used against libraries
that don't have the sigset_t change. This not an immediate
issue, but will be as soon as applications start using the
new range to its fullest.
NOTE: libncurses already had an version bump and has not been
given one now.
NOTE: doscmd is a real casualty and has been disconnected for
the moment. Reconnection will eventually happen after
doscmd has been fixed. I'm aware that being the last one
to touch it, I'm automaticly promoted to being maintainer.
According to good taste this means that I will receive a
badge which either will be glued or mechanically stapled,
drilled or otherwise violently forced onto me :-)
NOTE: pcvt/vttest cannot be compiled with -traditional. The
change cause sys/types to be included along the way which
contains the const and volatile modifiers. I don't consider
this a solution, but more a workaround.
- Sort xrefs
- Be consistent with section names as outlined in mdoc(7).
- Other misc mdoc cleanup.
PR: doc/13144
Submitted by: Alexey M. Zelkin <phantom@cris.net>
Add an emply MAIN__() function. This avoid an unresolved reference error
during link phase when using fortran subroutines with non-fortran 'main()'.
Obtained from: src/lib/libF77/MAIN.c rev 1.1 by jmz
aren't needed as those files aren't part of libstdc++ any longer. Another
isn't needed as Cygnus doesn't compile with -frtti.
Noticed by: bde & my initial mispelling of ".So".
I knew better... too dependant on the environment we generate in, but...
This fixes the
/usr/lib/libstdc++.so: undefined reference to `filebuf virtual table'
/usr/lib/libstdc++.so: undefined reference to `stdiobuf virtual table'
errors seen after the initial bootstrap from gcc 2.7.2 to EGCS.
Agreed with by: bde & jdp
than ".so". The old extension conflicted with well-established
naming conventions for dynamically loadable modules.
The "clean" targets continue to remove ".so" files too, to deal with
old systems.
shared versions should not need to add -lm unless the program uses libm
itself. Strictly speaking, libg++ depends on libstdc++, but libstdc++
has dynamic dependencies on some exception tables and binutils doesn't
seem to like it when a secondary library has undefined references. It
doesn't seem to care when -lstdc++ is added on the command line to ld
though. Anyway, the c++ driver adds -lstdc++ explicitly, so that should
be OK. c++ also adds -lm explicitly too, even though it wouldn't need
to now. [except for statically linked binaries as .a files don't have an
equivalent of automatic internal shared object dependencies.]
shamefully dropped on the floor. I need to add it now since it does a
minor number bump, but otherwise the current functionality of libdialog
is unchanged (in all its evil glory) and the change is non-intrusive.
Submitted by: "Anatoly A. Orehovsky" <tolik@mpeks.tomsk.su>
`XCC= <relative cc> -B<path to relative cc1> ...'. This is equivalent
when cc and cc1, etc. have just been bootstrapped by `make world'.
The relative versions normally won't work if the target system is
not binary compatible. Bootstrapping different versions of gcc
without going through `make world' is slightly more broken than
before.
Uniformized macro names (P1OBJS -> LIB1POBJS, etc.).
Don't give full paths to sources.
fix of putting generated source files in SRCS breaks many special
cases (many dependencies had to be incomplete for ${.ALLSRC}
not to give .h files that would break compiling with c++ -c).
Reduce these special cases to the general case so that SRCS works
normally and bsd.lib.mk handles most of the complications. Now
we only have to duplicate rules from bsd.lib.mk to add special
CFLAGS in some cases.
