Things seem to get stuck in low memory conditions where no bufs are available,
the reclamation path is called to wakeup the daemon, but no sleeping is done.
Because of this, we are stuck in a tight loop in the current process and
never run said reclamation path.
This was introduced in r289279 . This is only a temporary workaround
to restore system usefulness until the more permanent solutions can be
found.
Tested:
* Carambola2, 64MB (and 32MB by manual config.)
edition 2013. No need anymore to disable the protection if one set
the POXILY_CORRECT environment variable.
Reviewed by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D4092
Add S8, S16, S32, and U32 types; add SYSCTL*() macros for them, as well
as for the existing 64-bit types. (While SYSCTL*QUAD and UQUAD macros
already exist, they do not take the same sort of 'val' parameter that
the other macros do.)
Clean up the documented "types" in the sysctl.9 document. (These are
macros and thus not real types, but the manual page documents intent.)
The sysctl_add_oid(9) arg2 has been bumped from intptr_t to intmax_t to
accommodate 64-bit types on 32-bit pointer architectures.
This is just the kernel support piece; the userspace sysctl(1) support
will follow in a later patch.
Submitted by: Ravi Pokala <rpokala@panasas.com>
Reviewed by: cem
Relnotes: no
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D4091
This is required for fragments and encapsulated data (eg tunneling) to be redistributed
to the RSS bucket based on the eventual IPv6 header and protocol (TCP, UDP, etc) header.
* Add an mbuf tag with the state of IPv6 options parsing before the frame is queued
into the direct dispatch handler;
* Continue processing and complete the frame reception in the correct RSS bucket /
netisr context.
Testing results are in the phabricator review.
Differential Revision: https://reviews.freebsd.org/D3563
Submitted by: Tiwei Bie <btw@mail.ustc.edu.cn>
As reported by Coverity a null pointer de-reference panic would be triggered
when zfs_recover was set so switch to straight panic as it can never be
recovered.
Reported by: Coverity Scan
MFC after: 1
X-MFC-With: r290401
Sponsored by: Multiplay
This is a follow-up to r289845, which only fixed one occurence of CID
1009429.
Coverity CID: 1009429
Reviewed by: markj
MFC after: 2 weeks
X-MFC-With: r289845
Sponsored by: Spectra Logic
Differential Revision: https://reviews.freebsd.org/D4096
interrupt status register to process shared interrupts only if the bit
is active and only on core to which they are routed.
Reviewed by: imp, loos
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D3723
Add net.link.lagg.lacp.default_strict_mode which defines
the default value for LACP strict compliance for created
lagg devices.
Also:
* Add lacp_strict option to ifconfig(8).
* Fix lagg(4) creation examples.
* Minor style(9) fix.
MFC after: 1 week
The mbuf length fields must be set before m_adj() is called else
m_adj() will not always adjust the mbuf and an unaligned read
exception can trigger inside the network stack. This can happen on
platforms where unaligned reads are not supported. Adjust a length
check to include the 2-byte ethernet alignment while at it.
MFC after: 3 days
- Drop TSF initialization; device can discover it without our help.
- Do not touch R92C_BCN_CTRL_EN_BCN bit in STA mode.
- Add 'static' keyword for function definition.
Tested with RTL8188EU, STA mode.
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D3801
On the mpc85xx SoC family, writes to any part of a word in the CCSR affect the
full word. This prevents single-byte writes from taking the desired effect.
Code copied directly from ARM.
This speeds up buildworld by 16% on my system and buildkernel by 35%.
Rather than calling mkdep(1), which is just a wrapper around 'cc -E',
use the modern -MD -MT -MF flags to gather and generate dependencies during
compilation. This flag was introduced in GCC "a long time ago", in GCC 3.0,
and is also supported by Clang. (It appears that ICC also supports this but I
do not have access to test it). This avoids running the preprocessor *twice*
for every build, in both 'make depend' and 'make all'. This is especially
noticeable when using ccache since it does not cache preprocessor results from
mkdep(1) / 'cc -E', but still speeds up compilation with the -MD flags.
For 'make depend' a tree-walk is still done to ensure that all DPSRCS
are generated when expected, and that beforedepend/afterdepend and
_EXTRADEPEND are all still respected. In time this may change but for now
I've been conservative. The time for a tree-walk with -j combined with
SUBDIR_PARALLEL is not significant. For example, it takes about 9 seconds
with -j15 to walk all of src/ for 'make depend' now on my system.
A .depend file is still generated with the various rules that apply to
the final target, or custom rules. Otherwise there are now
per-built-object-file .depend files, such as .depend.filename.o. These
are included directly by make rather than populating .depend with a loop
and .depend lines, which only added overhead to the now almost-NOP 'make
depend' phase.
Before this I experimented with having mkdep(1) called in parallel per-file.
While this improved the kernel and lib/libc 'make depend' phase, it resulted
in slower build times overall.
The -M flags are removed from CFLAGS when linking since they have no effect.
Enabling this by default, for src or out-of-src, can be done once more testing
has been done, such as a ports exp-run, and with more compilers.
The system I used for testing was:
WITNESS
Build options: -j20 WITH_LLDB=yes WITH_DEBUG_FILES=yes WITH_FAST_DEPEND=yes
DISK: ZFS 3-way mirror with very slow disks using SSD l2arc/log.
The arc was fully populated with src tree files.
RAM: 76GiB
CPU: Intel(R) Xeon(R) CPU L5520 @2.27GHz
2 package(s) x 4 core(s) x 2 SMT threads = hw.ncpu=16
buildworld:
x buildworld-before
+ buildworld-fastdep
+-------------------------------------------------------------------------------+
|+ |
|+ |
|+ xx x|
| |_MA___||
|A |
+-------------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 3 3744.13 3794.31 3752.25 3763.5633 26.935139
+ 3 3153.34 3155.16 3154.2 3154.2333 0.91045776
Difference at 95.0% confidence
-609.33 +/- 43.1943
-16.1902% +/- 1.1477%
(Student's t, pooled s = 19.0569)
buildkernel:
x buildkernel-before
+ buildkernel-fastdep
+-------------------------------------------------------------------------------+
|+ x |
|++ xx|
| A||
|A| |
+-------------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 3 571.57 573.94 571.79 572.43333 1.3094401
+ 3 369.12 370.57 369.3 369.66333 0.79033748
Difference at 95.0% confidence
-202.77 +/- 2.45131
-35.4225% +/- 0.428227%
(Student's t, pooled s = 1.0815)
Sponsored by: EMC / Isilon Storage Division
MFC after: 3 weeks
Relnotes: yes
