namespace pollution in <sys/vnode.h>.
Sort the include of <sys/mutex.h> instead of unsorting it after
<sys/vnode.h> and depending on the pollution there.
Approved by: re (kensmith) (blanket)
sector, instead of failing the whole mount if it is garbage. Fields
in the fsinfo sector are only advisory, so there are better sanity
checks than this, and we already silently fix up the only other advisory
field in the fsinfo (the free cluster count).
This wasn't handled quite right in rev.1.92, 1.117, or in NetBSD. 1.92
also failed the whole mount for the non-garbage magic value 0xffffffff
1.117 fixed this well enough in practice since garbage values shouldn't
occur in practice, but left the error handling larger and more convoluted
than necessary. Now we handle the magic value as a special case of
fixing up all out of bounds values.
Also fix up the estimated next free cluster number when there is no
fsinfo sector. We were using 0, but CLUST_FIRST is safer.
Approved by: re (kensmith)
message explained why the size is 1 sector, but the code used a
size of 1 cluster.
I/o sizes larger than necessary may cause serious coherency problems
in the buffer cache. Here I think there were only minor efficiency
problems, since a too-large fsinfo buffer could only get far enough
to overlap buffers for the same vnode (the device vnode), so mappings
are coherent at the page level although not at the buffer level, and
the former is probably enough due to our limited use of the fsinfo
buffer.
Approved by: re (kensmith)
- Copy before testing a pointer. This closes a race window.
- Use msleep with the node interlock instead of tsleep.
- Do proper locking around access to tn_vpstate.
- Assert vnode VOP lock for dir_{atta,de}tach to capture
inconsistent locking.
Suggested by: kib
Submitted by: delphij
Reviewed by: Howard Su
Approved by: re (tmpfs blanket)
This fixes tmpfs caculations on 32-bit systems equipped with more than
4GB swap.
Reported by: Craig Boston <craig xfoil gank org>
PR: kern/114870
Approved by: re (tmpfs blanket)
o Initialize ownerships and permissions. They were garbage (0) for
root mounts since vfs_mountroot_try() doesn't ask for them to be set
and msdosfs's old incomplete code to set them was removed. The
garbage happened to give the correct ownerships root:wheel, but it
gave permissions 000 so init could not be execed. Use the macros
for root: wheel and 0755. (The removed code gave 0:0 and 0777. 0755
is more normal and secure, thought wrong for /tmp.)
o Check the readonly flag for initial (non-MNT_UPDATE) mounts in the
correct place, as in ffs. For root mounts, it is only passed in
mp->mnt_flags, since vfs_mountroot_try() only passes it as a flag
and nothing translates the flag to the "ro" option string. msdosfs
only looked for it in the string, so it gave a rw mount for root
mounts without even clearing the flag in mp->mnt_flags, so the final
state was inconsistent. Checking the flag only in mp->mnt_flags
works for initial userland mounts too. The MNT_UPDATE case is
messier.
The main point that should work but doesn't is fsck of msdosfs root
while it is mounted ro. This needs mainly MNT_RELOAD support to work.
It should be possible to run fsck -p and succeed provided the fs is
consistent, not just for msdosfs, but this fails because fsck -p always
tries to open the device rw. The hack that allows open for writing
in ffs is not implemented in msdosfs, since without MNT_RELOAD support
writing could only be harmful. So fsck must be turned off to use
msdosfs as root. This is quite dangerous, since msdosfs is still missing
actually using its fs-dirty flag internally, so it is happy to mount
dirty fileystems rw.
Unrelated changes:
- Fix missing error handling for MNT_UPDATE from rw to ro.
- Catch up with renaming msdos to msdosfs in a string.
Approved by: re (kensmith)
physical memory pages into account for tm_maxfilesize.
Reported by: Dominique Goncalves <dominique.goncalves gmail.com>
Submitted by: Howard Su
Approved by: re (tmpfs blanket)
This gives a very large speedup for small block sizes (in my tests,
about 5 times for write and 3 times for read with a block size of 512,
if clustering is possible) and a moderate speedup for the moderatatly
large block sizes that should be used on non-small media (4K is the
best size in most cases, and the speedup for that is about 1.3 times
for write and 1.2 times for read). mmap() should benefit from clustering
like read()/write(), but the current implementation of vm only supports
clustering (at least for getpages) if the fs block size is >= PAGE SIZE.
msdosfs is now only slightly slower than ffs with soft updates for
writing and slightly faster for reading when both use their best block
sizes. Writing is slower for msdosfs because of more sync writes.
Reading is faster for msdosfs because indirect blocks interfere with
clustering in ffs.
The changes in msdosfs_read() and msdosfs_write() are simpler merges
of corresponding code in ffs (after fixing some style bugs in ffs).
msdosfs_bmap() needs fs-specific code. This implementation loops
calling a lower level bmap function to do the hard parts. This is a
bit inefficient, but is efficient enough since msdsfs_bmap() is only
called when there is physical i/o to do.
Approved by: re (hrs)
In msdosfs_read(), mainly reorder the main loop to the same order as in
ffs_read().
In msdosfs_write() and extendfile(), use vfs_bio_clrbuf() instead of
clrbuf(). I think this just just a bogus optimization, but ffs always
does it and msdosfs already did it in one place, and it is what I've
tested.
In msdosfs_write(), merge good bits from a comment in ffs_write(), and
fix 1 style bug.
In the main comment for msdosfs_pcbmap(), improve wording and catch
up with 13 years of changes in the function. This comment belongs in
VOP_BMAP.9 but that doesn't exist.
In msdosfs_bmap(), return EFBIG if the requested cluster number is out
of bounds instead of blindly truncating it, and fix many style bugs.
Approved by: re (hrs)
We allocate coda_ctlvp when /coda is mounted, but never release it.
During the unmount this vnode was marked as UNMOUNTING and when venus
is started a second time the system would hang, possibly waiting for
the old vnode to disappear.
So now we call vrele on the control vnode when file system is unmounted
to drop the reference we got during the mount. I'm pretty sure it is
also necessary to not skip the handling in coda_inactive for the control
vnode, it seems like that is the place we actually get rid of the vnode
once the refcount has dropped to 0.
Submitted by: Jan Harkes <jaharkes at cs dot cmu dot edu>
Approved by: re (kensmith)
should finally fix fsx test case.
The printf's added here would be eventually turned into
assertions.
Submitted by: Mingyan Guo (mostly)
Approved by: re (tmpfs blanket)
by removing files from src/sys/coda, and updating include paths in the
new location, kernel configuration, and Makefiles. In one case add
$FreeBSD$.
Discussed with: anderson, Jan Harkes <jaharkes@cs.cmu.edu>
Approved by: re (kensmith)
Repo-copy madness: simon
to the FAT is possible.
Make the FAT block size less arbitrary before it is rounded up:
- for FAT12, default to 3*512 instead of to 3 sectors. The magic 3 is
the default number of 512-byte FAT sectors on a floppy drive. That
many sectors is too many if the sector size is larger.
- for !FAT12, default to PAGE_SIZE instead of to 4096. Remove
MSDOSFS_DFLTBSIZE since it only obfuscated this 4096.
For reading the BPB, use a block size of 8192 instead of 2048 so that
sector sizes up to 8192 can work. We should try several sizes, or just
try the maximum supported size (MAXBSIZE = 64K). I use 8192 because
that is enough for DVD-RW's (even 2048 is enough) and 8192 has been
tested a lot in use by ffs.
This completes fixing msdosfs for some large sector sizes (up to 8K
for read and 64K for write). Microsoft documents support for sector
sizes up to 4K in mdosfs. ffs is currently limited to 8K for both
read and write.
Approved by: re (kensmith)
Approved by: nyan (several years ago)
part of fixing msdosfs for large sector sizes. One of the fixed bugs
was fatal for large sector sizes.
1. The fsinfo block has size 512, but it was misunderstood and declared
as having size 1024, with nothing in the second 512 bytes except a
signature at the end. The second 512 bytes actually normally (if
the file system was created by Windows) consist of a second boot
sector which is normally (in WinXP) empty except for a signature --
the normal layout is one boot sector, one fsinfo sector, another
boot sector, then these 3 sectors duplicated. However, other
layouts are valid. newfs_msdos produces a valid layout with one
boot sector, one fsinfo sector, then these 2 sectors duplicated.
The signature check for the extra part of the fsinfo was thus
normally checking the signature in either the second boot sector
or the first boot sector in the copy, and thus accidentally
succeeding. The extra signature check would just fail for weirder
layouts with 512-byte sectors, and for normal layouts with any other
sector size.
Remove the extra bytes and the extra signature check.
2. Old versions did i/o to the fsinfo block using size 1024, with the
second half only used for the extra signature check on read. This
was harmless for sector size 512, and worked accidentally for sector
size 1024. The i/o just failed for larger sector sizes.
The version being fixed did i/o to the fsinfo block using size
fsi_size(pmp) = (1024 << ((pmp)->pm_BlkPerSec >> 2)). This
expression makes no sense. It happens to work for sector small
sector sizes, but for sector size 32K it gives the preposterous
value of 64M and thus causes panics. A sector size of 32768 is
necessary for at least some DVD-RW's (where the minimum write size
is 32768 although the minimum read size is 2048).
Now that the size of the fsinfo block is 512, it always fits in
one sector so there is no need for a macro to express it. Just
use the sector size where the old code uses 1024.
Approved by: re (kensmith)
Approved by: nyan (several years ago for a different version of (2))
ENOTTY. Make the control vnode a regular file so that ioctls are passed
through to our kernel module.
Submitted by: Jan Harkes <jaharkes@cs.cmu.edu>
Approved by: re (kensmith)
some previously disabled code which according to the comment caused a
problem during shutdown. But even that is still better than
triggering a kernel panic whenever venus is started.
Submitted by: Jan Harkes <jaharkes@cs.cmu.edu>
Approved by: re (kensmith)
we can't open container files by device/inode number pair anymore.
Replace the CODA_OPEN upcall with CODA_OPEN_BY_FD, where venus returns
an open file descriptor for the container file. We can then grab a
reference on the vnode coda_psdev.c:vc_nb_write and use this vnode for
further accesses to the container file.
Submitted by: Jan Harkes <jaharkes@cs.cmu.edu>
Approved by: re (kensmith)
operations. But we don't have to, if we find the coda_mntinfo structure
for this device in our linked list, we know the device is good.
Submitted by: Jan Harkes <jaharkes@cs.cmu.edu>
Approved by: re (kensmith)
need to initialize dev so that we can actually find the allocated
coda_mntinfo structure later on.
Submitted by: Jan Harkes <jaharkes@cs.cmu.edu>
Approved by: re (kensmith)
of the the first cluster in a file (and, if the allocation cannot be
continued contiguously, for subsequent clusters in a file) was randomized
in an attempt to leave space for contiguous allocation of subsequent
clusters in each file when there are multiple writers. This reduced
internal fragmentation by a few percent, but it increased external
fragmentation by up to a few thousand percent.
Use simple sequential allocation instead. Actually maintain the fsinfo
sequence index for this. The read and write of this index from/to
disk still have many non-critical bugs, but we now write an index that
has something to do with our allocations instead of being modified
garbage. If there is no fsinfo on the disk, then we maintain the index
internally and don't go near the bugs for writing it.
Allocating the first free cluster gives a layout that is almost as good
(better in some cases), but takes too much CPU if the FAT is large and
the first free cluster is not near the beginning.
The effect of this change for untar and tar of a slightly reduced copy
of /usr/src on a new file system was:
Before (msdosfs 4K-clusters):
untar: 459.57 real untar from cached file (actually a pipe)
tar: 342.50 real tar from uncached tree to /dev/zero
Before (ffs2 soft updates 4K-blocks 4K-frags)
untar: 39.18 real
tar: 29.94 real
Before (ffs2 soft updates 16K-blocks 2K-frags)
untar: 31.35 real
tar: 18.30 real
After (msdosfs 4K-clusters):
untar 54.83 real
tar 16.18 real
All of these times can be improved further.
With multiple concurrent writers or readers (especially readers), the
improvement is smaller, but I couldn't find any case where it is
negative. 342 seconds for tarring up about 342 MB on a ~47MB/S partition
is just hard to unimprove on. (This operation would take about 7.3
seconds with reasonably localized allocation and perfect read-ahead.)
However, for active file systems, 342 seconds is closer to normal than
the 16+ seconds above or the 11 seconds with other changes (best I've
measured -- won easily by msdosfs!). E.g., my active /usr/src on ffs1
is quite old and fragmented, so reading to prepare for the above
benchmark takes about 6 times longer than reading back the fresh copies
of it.
Approved by: re (kensmith)
- Plug memory leak.
- Respect underlying vnode's properties rather than assuming that
the user want root:wheel + 0755. Useful for using tmpfs(5) for
/tmp.
- Use roundup2 and howmany macros instead of rolling our own version.
- Try to fix fsx -W -R foo case.
- Instead of blindly zeroing a page, determine whether we need a pagein
order to prevent data corruption.
- Fix several bugs reported by Coverity.
Submitted by: Mingyan Guo <guomingyan gmail com>, Howard Su, delphij
Coverity ID: CID 2550, 2551, 2552, 2557
Approved by: re (tmpfs blanket)
destroy_dev() from d_close() cdev method would self-deadlock.
devfs_close() bump device thread reference counter, and destroy_dev()
sleeps, waiting for si_threadcount to reach zero for cdev without
d_purge method.
destroy_dev_sched() could be used instead from d_close(), to
schedule execution of destroy_dev() in another context. The
destroy_dev_sched_drain() function can be used to drain the scheduled
calls to destroy_dev_sched(). Similarly, drain_dev_clone_events() drains
the events clone to make sure no lingering devices are left after
dev_clone event handler deregistered.
make_dev_credf(MAKEDEV_REF) function should be used from dev_clone
event handlers instead of make_dev()/make_dev_cred() to ensure that created
device has reference counter bumped before cdev mutex is dropped inside
make_dev().
Reviewed by: tegge (early versions), njl (programming interface)
Debugging help and testing by: Peter Holm
Approved by: re (kensmith)
- Remove unnecessary NULL checks after M_WAITOK allocations.
- Use VOP_ACCESS instead of hand-rolled suser_cred()
calls. [1]
- Use malloc(9) KPI to allocate memory for string. The
optimization taken from NetBSD is not valid for FreeBSD
because our malloc(9) already act that way. [2]
Requested by: rwatson [1]
Submitted by: Howard Su [2]
Approved by: re (tmpfs blanket)
- Remove tmpfs_zone_xxx KPI, the uma(9) wrapper, since
they does not bring any value now.
- Use |= instead of = when applying VV_ROOT flag.
- Remove tm_avariable_nodes list. Use uma to hold the
released nodes.
- init/destory interlock mutex of node when init/fini
instead of ctor/dtor.
- Change memory computing using u_int to fix negative
value in 2G mem machine.
- Remove unnecessary bzero's
- Rely uma logic to make file id allocation harder to
guess.
- Fix some unsigned/signed related things. Make sure
we respect -o size=xxxx
- Use wire instead of hold a page.
- Pass allocate_zero to obtain zeroed pages upon first
use.
Submitted by: Howard Su
Approved by: re (tmpfs blanket, kensmith)
Please note that, this is currently considered as an
experimental feature so there could be some rough
edges. Consult http://wiki.freebsd.org/TMPFS for
more information.
For now, connect tmpfs to build on i386 and amd64
architectures only. Please let us know if you have
success with other platforms.
This work was developed by Julio M. Merino Vidal
for NetBSD as a SoC project; Rohit Jalan ported it
from NetBSD to FreeBSD. Howard Su and Glen Leeder
are worked on it to continue this effort.
Obtained from: NetBSD via p4
Submitted by: Howard Su (with some minor changes)
Approved by: re (kensmith)
some cases, move to priv_check() if it was an operation on a thread and
no other flags were present.
Eliminate caller-side jail exception checking (also now-unused); jail
privilege exception code now goes solely in kern_jail.c.
We can't yet eliminate suser() due to some cases in the KAME code where
a privilege check is performed and then used in many different deferred
paths. Do, however, move those prototypes to priv.h.
Reviewed by: csjp
Obtained from: TrustedBSD Project
This patch fixes places where they should be called atomically changing
their locking requirements (both assume per-proc spinlock held) and
introducing rufetchcalc which wrappers both calls to be performed in
atomic way.
Reviewed by: jeff
Approved by: jeff (mentor)
- Use thread_lock() rather than sched_lock for per-thread scheduling
sychronization.
- Use the per-process spinlock rather than the sched_lock for per-process
scheduling synchronization.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
Now, we assume no more sched_lock protection for some of them and use the
distribuited loads method for vmmeter (distribuited through CPUs).
Reviewed by: alc, bde
Approved by: jeff (mentor)
argument from being file descriptor index into the pointer to struct file:
part 2. Convert calls missed in the first big commit.
Noted by: rwatson
Pointy hat to: kib
