This prepares for the upcoming transparent VF support.
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11708
Don't enable the oscillator when it is found to be stopped at init time,
just let the first setting of valid time start it. But still report a dead
battery if it's stopped at init time.
Don't force the chip into 24hr mode, just cope with whatever mode it is
already in.
Schedule the clock_settime() callbacks to align the RTC clock to top of
second when setting it.
subr_rtc code, switch from CLOCKF_SETTIME_NO_TS to CLOCKF_SETTIME_NO_ADJ
so that we get fed a timestamp, but it's not adjusted to compensate for
inaccuracy in setting time.
Update the use of the B_CACHE flag (since the May 1999 commit
that made it the correct test here).
Reported by: Andreas Longwitz <longwitz@incore.de>
Reviewed by: kib
Tested by: Peter Holm
MFC after: 1 week
Atomic updates to v_wire_count are a significant source of contention, so
combine multiple updates into one in this easy case. Also remove an old
printf that gets executed if the page is shared-busied, which is a case
that will lead to a panic anyway.
Reviewed by: alc, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11791
In this case we shouldn't assume that the thread has a valid frame pointer.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11787
This change adds two new tunables, allowing to control serialization for
read and write NFS requests separately. It does not change the default
behavior since there are too many factors to consider, but gives additional
space for further experiments and tuning.
The main motivation for this change is very low write speed in case of ZFS
with sync=always or when NFS clients requests sychronous operation, when
every separate request has to be written/flushed to ZIL, and requests are
processed one at a time. Setting vfs.nfsd.fha.write=0 in that case allows
to increase ZIL throughput by several times by coalescing writes and cache
flushes. There is a worry that doing it may increase data fragmentation
on disks, but I suppose it should not happen for pool with SLOG.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
from enc_hhook().
This should solve the problem when pf is used with if_enc(4) interface,
and outbound packet with existing PCB checked by pf, and this leads to
deadlock due to pf does its own PCB lookup and tries to take rlock when
wlock is already held.
Now we pass PCB pointer if it is known to the pfil hook, this helps to
avoid extra PCB lookup and thus rlock acquiring is not needed.
For inbound packets it is safe to pass NULL, because we do not held any
PCB locks yet.
PR: 220217
MFC after: 3 weeks
Sponsored by: Yandex LLC
request that their clock_settime() methods be called at a given offset
from top-of-second. This adds a timeout_task to the rtc_instance so that
each clock can be separately added to taskqueue_thread with the scheduling
it prefers, instead of looping through all the clocks at once with a
single task on taskqueue_thread. If a driver doesn't call clock_schedule()
the default is the old behavior: clock_settime() is queued immediately.
The motivation behind this is that I was on the path of adding identical
code to a third RTC driver to figure out a delta to top-of-second and
sleep for that amount of time because writing the the RTC registers resets
the hardware's concept of top-of-second. (Sometimes it's not top-of-second,
some RTC clocks tick over a half second after you set their time registers.)
Worst-case would be to sleep for almost a full second, which is a rude thing
to do on a shared task queue thread.
over the scheduling precision than 'ticks' can offer, and because sometimes
you're already working with sbintime_t units and it's dumb to convert them
to ticks just so they can get converted back to sbintime_t under the hood.
Since device can pass multiple frames in a single payload temporary
Rx buffer was big enough to hold all of them; now the driver can
concatenate a single frame from multiple payloads.
The Rx buffer size may be configured via tunable (dev.rtwn.%d.rx_buf_size).
Tested with:
- rtl8188cus, rtl8188eu and rtl8821au (STA mode).
- (by kevlo) rtl8192cu and rtl8188eu.
PR: 218527
Reviewed by: kevlo
Differential Revision: https://reviews.freebsd.org/D11705
the informational print functions. Collapse the debug API a bit to be
more generic and not require as much code duplication. While here, fix
a bug in MPS that was already fixed in MPR.
between 12/24 hour mode. Also fix conversion between 12 and 24 hour mode.
It's not as easy as adding/subtracting 12, because the clock doesn't roll
over 11->0, it rolls over 12->1; 0 isn't a valid hour in AM/PM mode.
Don't enable the oscillator when it is found to be stopped at init time,
just let the first setting of valid time start it. But still report a dead
battery if it's stopped at init time.
Don't force the chip into 24hr mode, just cope with whatever mode it is
already in.
Align the RTC clock to top of second when setting it.
Resource allocation for parent device does not look good by itself, but
attempt to allocate them for unrelated device just does not end up good.
On Asus X99-E WS/USB3.1 system reporting ISA bridge via both PCI and ACPI
this reported to cause kernel panic on shutdown due to messed resources:
https://bugs.freenas.org/issues/25237.
MFC after: 1 week
Do the allocation before requesting the IOCFacts message. This triggers
the LSI firmware to recognize the multiqueue should be enabled if available.
Multiqueue isn't used by the driver yet, but this also fixes a problem with
the cached IOCFacts not matching latter checks, leading to potential problems
with error recovery.
As a side-effect, fetch the driver tunables as early as possible.
Reviewed by: slm
Obtained from: Netflix
Differential Revision: D9243
all the chips in the NXP PCA212x and PCA/PCF85xx series. In addition to
supporting more chips, this driver uses the countdown timer on the chips as
a fractional seconds counter, giving it a resolution of about 15 milliseconds.
No functional change.
This is handy for FreeBSD derivatives that want to modify the value of
MAXPATHLEN, but not the kld_file_stat ABI.
Submitted by: Siddhant Agarwal <sagarwal AT isilon.com>
Sponsored by: Dell EMC Isilon
When an NFS mount is hung against an unresponsive NFS server, the "umount -f"
option can be used to dismount the mount. Unfortunately, "umount -f" gets
hung as well if a "umount" without "-f" has already been done. Usually,
this is because of a vnode lock being held by the "umount" for the mounted-on
vnode.
This patch adds kernel code so that a new "-N" option can be added to "umount",
allowing it to avoid getting hung for this case.
It adds two flags. One indicates that a forced dismount is about to happen
and the other is used, along with setting mnt_data == NULL, to handshake
with the nfs_unmount() VFS call.
It includes a slight change to the interface used between the client and
common NFS modules, so I bumped __FreeBSD_version to ensure both modules are
rebuilt.
Tested by: pho
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D11735
Use them in some existing code that is vulnerable to roundoff errors.
The existing constant SBT_1NS is a honeypot, luring unsuspecting folks into
writing code such as long_timeout_ns*SBT_1NS to generate the argument for a
sleep call. The actual value of 1ns in sbt units is ~4.3, leading to a
large roundoff error giving a shorter sleep than expected when multiplying
by the trucated value of 4 in SBT_1NS. (The evil honeypot aspect becomes
clear after you waste a whole day figuring out why your sleeps return early.)
Currently in Virtio driver without TSO/GSO features enabled, the max scatter
gather segments for the TX path can be 4, which limits the support for 9K JUMBO
frames. 9K JUMBO frames results in more than 4 scatter gather segments and
virtio driver fails to send the frame down to host OS. With TSO/GSO feature
enabled max scatter gather segments can be 64, then 9K JUMBO frames are fine,
this is making virtio driver to support JUMBO frames only with TSO/GSO.
Increasing the VTNET_MIN_TX_SEGS which is the case for non TSO/GSO to 32 to
support upto 64K JUMBO frames to Host.
Submitted by: Lohith Bellad <lohithbsd@gmail.com>
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D8803
If the nfsrpc_createlayoutrpc() call in nfsrpc_getcreatelayout() fails,
the code used nfhpp when it might be set NULL. This patch checks for
the error cases (laystat != 0) and avoids using nfhpp for the failure case.
This would only affect NFSv4.1 mounts with the "pnfs" option.
Found while testing the "umount -N" patch not yet in head.
MFC after: 2 weeks
pmap_remap_vm_attr() function requires indexes to
pte2_attr_tab as the arguments (VM_MEMATTR_).
Mistakenly, instead of them, actual values from the
table were used (PTE2_ATTR_), when applying
work-around for Marvell Armada 38x SoCs.
Submitted by: Marcin Wojtas (mw@semihalf.com)
Reported by: Rafal Kozik (rk@semihalf.com)
Reviewed by: cognet (mentor)
Approved by: cognet (mentor)
Obtained from: Semihalf
Differential Revision: https://reviews.freebsd.org/D11704
The ksyms(4) device was added specifically for use by lockstat(1), which
as a DTrace consumer must run as root.
Discussed with: emaste
MFC after: 3 days
The TEX index is selected using (TEX0 C B) bits
from the L2 descriptor. Use correct index by masking
and shifting those bits accordingly.
Differential Revision: https://reviews.freebsd.org/D11703
queue lock when the uppoer stack is called inside TCP_LRO
Submitted by: Kevin Bowling <kevin.bowling@kev009.com>
Reviewed by: erj
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D11724
were redundant and not being used to set anything up.
Submitted by: Matt Macy <mmacy@mattmacy.io>
Reported by: Jeb Cramer <cramerj@intel.com>
Sponsored by: Limelight Networks
This patch defines a macro that checks for MNTK_UNMOUNTF and replaces
explicit checks with this macro. It has no effect on semantics, but
prepares the code for a future patch where there will also be a
NFS specific flag for "forced dismount about to occur".
Suggested by: kib
MFC after: 2 weeks
New kern.lognosys values are
1 - log to ctty
2 - log to console
3 - log to both.
Inspired by: eugen
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This largely reverts FreeBSD SVN change 289937 from October 25th, 2015.
The intent of that change was to keep loop IDs persistent across
chip reinits.
The problem is that the change turned on the PREVLOOP /
PREV_ADDRESS bit (bit 7 in Firmware Options 2), which tells the
Qlogic chip to not participate in the loop if it can't get the
requested loop address. It also turned off soft addressing on 2400
(4Gb) and newer controllers.
The isp(4) driver defaults to loop address 0, and the tape drives
I have tested default to loop address 0 if hard addressing is turned
on. So when hard loop addressing is turned on on the drive, the isp(4)
driver just refuses to participate in the loop.
The solution is to largely revert that change. I left some elements
in place that are related to virtual ports, since they were new.
This does work with IBM tape drives with hard and soft addressing
turned on. I have tested it with 4Gb, 8Gb, and 16Gb controllers.
sys/dev/isp.c:
Largely revert FreeBSD SVN change 289937. I left the
ispmbox.h changes in place.
Don't use the PREV_ADDRESS bit on initialization. It tells
the chip to not participate if it can't get the requested
loop ID.
Do use soft addressing on 2400 and newer chips.
Use hard addressing when the user has requested a specific
initiator ID. (hint.isp.X.iid=N in /boot/loader.conf)
Leave some of the virtual port options from that change in
place, but don't turn on the PREV_ADDRESS bit.
Reviewed by: mav
MFC after: 3 days
Sponsored by: Spectra Logic
this to be too restrictive. We need to have both broadcast and unicast
enabled for loader to work. Set them in all cases to ensure this is true.
This allows the Cavium ThunderX 2s in the netperf cluster to netboot using
a USB NIC.
PR: 221001
Reviewed by: emaste, tsoome
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11732
flowtable anymore (as flowtable was never considered to be useful in
the forwarding path).
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D11448
The attached patch lets adaasync() set ADA_STATE_WCACHE based on
ADA_FLAG_CAN_WCACHE instead of ADA_FLAG_CAN_RAHEAD.
This fixes a regression introduced in r300207 which changed
the flag names.
PR: 220948
Submitted by: Fabian Keil <fk@fabiankeil.de>
Obtained from: ElectroBSD
MFC after: 1 week
Reduce the use of local copies of switch register data.
The switch now works with the upstream dsa node (i.e. the upstream DTS).
Tested on: ClearFog Pro (88E6176), SG-3100 (88E6141)
Sponsored by: Rubicon Communications, LLC (Netgate)
for embedded slots. Fail in the sdhci(4) initialization for slot type
shared, which is completely unsupported by this driver at the moment. [1]
For Intel eMMC controllers, taking the embedded slot type into account
obsoltes setting SDHCI_QUIRK_ALL_SLOTS_NON_REMOVABLE so remove these quirk
entries.
- Hide the 1.8 V VDD capability when the slot is detected as non-embedded,
as the SDHCI specification explicitly states that 1.8 V VDD is applicable
to embedded slots only. [2]
- Define some easy bits of the SDHCI specification v4.20. [3]
- Don't leak bus_dma(9) resources in failure paths of sdhci_init_slot().
Obtained from: DragonFlyBSD 65704a46 [1], 7ba10b88 [2], 0df14648 [3]
r307901 was reverted in r321480, restoring an incorrect block
delimitation bug present in the original cc_cubic commit. Restore
only the bugfix (brace addition) from r307901.
CID: 1090182
Approved by: sbruno
Usually it is sufficient to use iicbus_transfer_excl(), or one of the
higher-level convenience functions that use it, to reserve the bus for the
duration of each register access. Occasionally it is important that a
series of accesses or read-modify-write operations must be done without any
other intervening access to the device, to prevent corrupting state.
Without support for nested request/release, slave device drivers would have
to stop using high-level convenience functions and resort to working with
arrays of iic_msg structs just for a few operations (often involving
one-time device setup or infrequent configuration changes).
The changes here appear large from a glance at the diff, but in fact they're
nearly trivial, and the large diff is because of changes in indentation and
the re-wrapping of comments caused by that. One notable change is that
iicbus_release_bus() now ignores the IICBUS_CALLBACK(IIC_RELEASE_BUS) return
value. The old error handling left the bus in a kind of limbo state where
it was still owned at the iicbus layer, but drivers rarely check the return
of the release call, and it's unclear what they would do to recover from an
error return anyway. No existing low-level drivers return any kind of error
from IIC_RELEASE_BUS except one EINVAL for "you don't own the bus", to which
the right response is probably to carry on with the process of releasing the
reference to the bus anyway.
on i2c devices, where the "register" can be any length.
Many (perhaps most) common i2c devices are organized as a collection of
(usually 1-byte-wide) registers, and are accessed by first writing a 1-byte
register index/offset number, then by reading or writing the data.
Generally there is an auto-increment feature so the when multiple bytes
are read or written, multiple contiguous registers are accessed.
Most existing slave device drivers allocate an array of iic_msg structures,
fill in all the transfer info, and invoke iicbus_transfer(). These new
functions commonize all that and reduce register access to a simple call
with a few arguments.
Suppose that a file on NFS has partially filled last page, and this
page is dirty. NFS VOP_PAGEOUT() method only marks the the page clean
up to the block of the last written byte, leaving other blocks dirty.
Also any page which erronously exists in the vnode vm_object past EOF
is also left marked as dirty.
With the introduction of the buf-cache coherent pager, each pass of
syncer over the object with such page results in creation of B_DELWRI
buffer due to VOP_WRITE() call. This buffer is noted on next syncer
pass, which results e.g. a visible manifestation of shutdown never
finishing vnode sync. Note that before buf-cache coherency commit, a
dirty page might left never synced to server if a partial writes
occur.
Fix this by clearing dirty bits after EOF. Only blocks of the partial
page which are completely after EOF are marked clean, to avoid
possible user data loss.
Reported by: mav
Reviewed by: alc, markj
Tested by: mav, pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D11697
The CloudABI specification has had some minor changes over the last half
year. No substantial features have been added, but some features that
are deemed unnecessary in retrospect have been removed:
- mlock()/munlock():
These calls tend to be used for two different purposes: real-time
support and handling of sensitive (cryptographic) material that
shouldn't end up in swap. The former use case is out of scope for
CloudABI. The latter may also be handled by encrypting swap.
Removing this has the advantage that we no longer need to worry about
having resource limits put in place.
- SOCK_SEQPACKET:
Support for SOCK_SEQPACKET is rather inconsistent across various
operating systems. Some operating systems supported by CloudABI (e.g.,
macOS) don't support it at all. Considering that they are rarely used,
remove support for the time being.
- getsockname(), getpeername(), etc.:
A shortcoming of the sockets API is that it doesn't allow you to
create socket(pair)s, having fake socket addresses associated with
them. This makes it harder to test applications or transparently
forward (proxy) connections to them.
With CloudABI, we're slowly moving networking connectivity into a
separate daemon called Flower. In addition to passing around socket
file descriptors, this daemon provides address information in the form
of arbitrary string labels. There is thus no longer any need for
requesting socket address information from the kernel itself.
This change also updates consumers of the generated code accordingly.
Even though system calls end up getting renumbered, this won't cause any
problems in practice. CloudABI programs always call into the kernel
through a kernel-supplied vDSO that has the numbers updated as well.
Obtained from: https://github.com/NuxiNL/cloudabi
The PCTRIE macro will be shortly applied in a situation where
LOOKUP_LE is not needed.
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
X-Differential revision: https://reviews.freebsd.org/D11435
* While there clean up alignments and line wrapping in existing
definitions for rs API in if_iwmreg.h
Obtained from: dragonflybsd.git 085e37a042bdb17081e495e46919359ce43aa118
* iwm_xmit_queue_drain() calls ieee80211_free_node(), removing a possible
memory leak, compared to using just mbufq_drain().
* Remove duplicate mbufq_drain() from iwm_mvm_rm_sta(), this should be
handled in the caller.
Obtained from: dragonflybsd.git 339d45fda40072e0aca5ece639173204716f11fe
* Limiting the channel list with "ifconfig wlan0 chanlist ..." now will
actually set the list of channels scanned by iwm.
Tested:
* Intel 7260, STA mode, setting chanlist to 1-14 and 36-254, and indeed it does what
it should!
This was discussed between various transport@ members and it was
requested to be reverted and discussed.
Submitted by: Kevin Bowling <kevin.bowling@kev009.com>
Reported by: lawrence
Reviewed by: hiren
Sponsored by: Limelight Networks
This was discussed between various transport@ members and it was
requested to be reverted and discussed.
Submitted by: kevin
Reported by: lawerence
Reviewed by: hiren
of LOR detection and a bit of lock release/acquire collision when using LRO.
Submitted by: Kevin Bowling <kevin.bowling@kev009.com>
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D11712
That is required to support reboot -r with a new root filesystem being
on an already imported pool.
PR: 210721
Reported by: Jan Bramkamp <crest_maintainer@rlwinm.de>
MFC after: 2 weeks
and keepalive in the sysctl MIB. Provide tunables to change some of
these parameters. These are supposed to be setup by the firmware so
these tunables are for experimentation only.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
"leaf" functions for alloc, free, and fill. After the change, the interface
functions call "meta" unconditionally, and the "meta" functions recur
unconditionally in looping over their descendants. The "meta" functions
start with a validity test, and then a test for the "leaf" case, before
falling into the general recursive case. This simplifies and shrinks the
code, and, for "free" and "fill" moves panic tests that check the same meta
node repeatedly in a loop to a place that will have each node tested once.
Remove irrelevant null checks from blist_free and blist_fill.
Make the code that initializes a meta node the same in blist_meta_alloc and
blist_meta_fill.
Parenthesize return expressions in blst_meta_fill.
Submitted by: Doug Moore <dougm@rice.edu>
MFC after: 1 week
This status will be reported if the backend NIC is wireless; it's not
useful. Due to the high frequency of the reporting, this could be
pretty annoying; ignore it.
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11651
The VF-HN map will be used later on to implement "transparent VF".
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11618
ifnet_arrival_event may not be adequate under certain situation; e.g.
when the LLADDR is needed. So the ethernet ifattach event is announced
after all necessary bits are setup.
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11617
Most realtime clocks store the year as 2 BCD digits. Some add a century bit
to extend the range another hundred years. Every clock driver has its own
code to determine the century and pass a full year value to clock_ct_to_ts().
Now clock drivers can just convert BCD to bin and store the result in the
clocktime struct and let the common code figure out the century. Clocks
with a century bit can just add 100 to year if the century bit is on.
doesn't seem to have one. This lets the driver recover automatically
from incomplete firmware upgrades (panic, reboot, power loss, etc. in
the middle of an upgrade).
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision discusses the benefits of this change.)
Add a function, vm_reserv_to_superpage(), that returns the superpage
containing the specified base page.
Reviewed by: kib, markj
Tested by: pho
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D11556
sdhci(4), mmc(4) and mmcsd(4). For the most part, this consists of:
- Correcting and extending the infrastructure for negotiating and
enabling post-DDR52 modes already added as part of r315598. In
fact, HS400ES now should work as well but hasn't been activated
due to lack of corresponding hardware.
- Adding support executing standard SDHCI initial tuning as well
as re-tuning as required for eMMC HS200/HS400 and the fast UHS-I
SD card modes. Currently, corresponding methods are only hooked
up to the ACPI and PCI front-ends of sdhci(4), though. Moreover,
sdhci(4) won't offer any modes requiring (re-)tuning to the MMC/SD
layer in order to not break operations with other sdhci(4) front-
ends. Likewise, sdhci(4) now no longer offers modes requiring the
set_uhs_timing method introduced in r315598 to be implemented/
hooked up (previously, this method was used with DDR52 only, which
in turn is only available with Intel controllers so far, i. e. no
such limitation was necessary before). Similarly for 1.2/1.8 V VCCQ
support and the switch_vccq method.
- Addition of locking to the IOCTL half of mmcsd(4) to prevent races
with detachment and suspension, especially since it's required to
immediately switch away from RPMB partitions again after an access
to these (so re-tuning can take place anew, given that the current
eMMC specification v5.1 doesn't allow tuning commands to be issued
with a RPMB partition selected). Therefore, the existing part_mtx
lock in the mmcsd(4) softc is additionally renamed to disk_mtx in
order to denote that it only refers to the disk(9) half, likewise
for corresponding macros.
On the system where the addition of DDR52 support increased the read
throughput to ~80 MB/s (from ~45 MB/s at high speed), HS200 yields
~154 MB/s and HS400 ~187 MB/s, i. e. performance now has more than
quadrupled compared to pre-r315598.
Also, with the advent of (re-)tuning support, most infrastructure
necessary for SD card UHS-I modes up to SDR104 now is also in place.
Note, though, that the standard SDHCI way of (re-)tuning is special
in several ways, which also is why sending the actual tuning requests
to the device is part of sdhci(4). SDHCI implementations not following
the specification, MMC and non-SDHCI SD card controllers likely will
use a generic implementation in the MMC/SD layer for executing tuning,
which hasn't been written so far, though.
However, in fact this isn't a feature-only change; there are boards
based on Intel Bay Trail where DDR52 is problematic and the suggested
workaround is to use HS200 mode instead. So far exact details are
unknown, however, i. e. whether that's due to a defect in these SoCs
or on the boards.
Moreover, due to the above changes requiring to be aware of possible
MMC siblings in the fast path of mmc(4), corresponding information
now is cached in mmc_softc. As a side-effect, mmc_calculate_clock(),
mmc_delete_cards(), mmc_discover_cards() and mmc_rescan_cards() now
all are guaranteed to operate on the same set of devices as there no
longer is any use of device_get_children(9), which can fail in low
memory situations. Likewise, mmc_calculate_clock() now longer will
trigger a panic due to the latter.
o Fix a bug in the failure reporting of mmcsd_delete(); in case of an
error when the starting block of a previously stored erase request
is used (in order to be able to erase a full erase sector worth of
data), the starting block of the newly supplied bio_pblkno has to be
returned for indicating no progress. Otherwise, upper layers might
be told that a negative number of BIOs have been completed, leading
to a panic.
o Fix 2 bugs on resume:
- Things done in fork1(9) like the acquisition of an SX lock or the
sleepable memory allocation are incompatible with a MTX_DEF taken.
Thus, mmcsd_resume() must not call kproc_create(9), which in turn
uses fork1(9), with the disk_mtx (formerly part_mtx) held.
- In mmc_suspend(), the bus is powered down, which in the typical
case of a device being selected at the time of suspension, causes
the device deselection as part of the bus acquisition by mmc(4) in
mmc_scan() to fail as the bus isn't powered up again before later
in mmc_go_discovery(). Thus, power down with the bus acquired in
mmc_suspend(), which will trigger the deselection up-front.
o Fix a memory leak in mmcsd_ioctl() in case copyin(9) fails. [1]
o Fix missing variable initialization in mmc_switch_status(). [2]
o Fix R1_SWITCH_ERROR detection in mmc_switch_status(). [3]
o Handle the case of device_add_child(9) failing, for example due to
a memory shortage, gracefully in mmc(4) and sdhci(4), including not
leaking memory for the instance variables in case of mmc(4) (which
might or might not fix [4] as the latter problem has been discovered
independently).
o Handle the case of an unknown SD CSD version in mmc_decode_csd_sd()
gracefully instead of calling panic(9).
o Again, check and handle the return values of some additional function
calls in mmc(4) instead of assuming that everything went right or mark
non-fatal errors by casting the return value to void.
o Correct a typo in the Linux IOCTL compatibility; it should have been
MMC_IOC_MULTI_CMD rather than MMC_IOC_CMD_MULTI.
o Now that we are reaching ever faster speeds (more improvement in this
regard is to be expected when adding ADMA support to sdhci(4)), apply
a few micro-optimizations like predicting mmc(4) and sdhci(4) debugging
to be off or caching erase sector and maximum data sizes as well support
of block addressing in mmsd(4) (instead of doing 2 indirections on every
read/write request for determining the maximum data size for example).
Reported by: Coverity
CID: 1372612 [1], 1372624 [2], 1372594 [3], 1007069 [4]
* Add in the hints needed for AR933x ath(4) support - this is the nicer way
that allows ath to be a module;
* ATH_EEPROM_FIRMWARE is also required for all AR933x chipsets.
Tested:
* Carambola2, AR933x
add support for explicitly requesting that pmap_enter() create a 2MB page
mapping. (Essentially, this feature allows the machine-independent layer to
create superpage mappings preemptively, and not wait for automatic promotion
to occur.)
Export pmap_ps_enabled() to the machine-independent layer.
Add a flag to pmap_pv_insert_pde() that specifies whether it should fail or
reclaim a PV entry when one is not available.
Refactor pmap_enter_pde() into two functions, one by the same name, that is
a general-purpose function for creating PDE PG_PS mappings, and another,
pmap_enter_2mpage(), that is used to prefault 2MB read- and/or execute-only
mappings for execve(2), mmap(2), and shmat(2).
Submitted by: Yufeng Zhou <yz70@rice.edu> (an earlier version)
Reviewed by: kib, markj
Tested by: pho
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D11556
superpage all belong to the same object. To date, that check has not been
needed, but upcoming changes require it. (See the Differential Revision.)
Reviewed by: kib, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11556
It looks like the __acquire and __release macros are for the consumption
of static analysis tools and have no semantic effect. Transform the
definitions from constant expressions to empty statements in order to
avoid -Wunused-value from gcc.
Likewise avoid future warnings for __chk_{user,io}_ptr, but with a cast
to void, because it looks like some linux kernel code may use those in
expression contexts.
Reviewed by: hselasky, markj
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11695
5.0.0 (trunk r308421). Upstream has branched for the 5.0.0 release,
which should be in about a month. Please report bugs and regressions,
so we can get them into the release.
Please note that from 3.5.0 onwards, clang, llvm and lldb require C++11
support to build; see UPDATING for more information.
MFC after: 2 months
For freshly allocated snapdata, Lock sn_lock in advance, so
si_snapdata readers see the locked snapdata and not race.
For existing snapdata, if the thread was put to sleep waiting for
sn_lock, re-read si_snapdata. This either closes the race or makes
the reliance on LK_DRAIN less important.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
It is possible for ffs_snapblkfree() to race and lock snaplock while
the devvp snapdata is instantiated, but no snapshots exist. In this
case the loop over snapshots in ffs_snapblkfree() is not executed, and
the local variable vp is left initialized to NULL.
Unlock using &sn->sn_lock and not vp->v_vnlock. For the inodes on the
snapshot list, the locks are same.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
in ffs_snapremove().
Apparently ffs_snapremove() may be called with the snap lock recursed,
at least one trace demonstrated this when snapshot vnode was unlinked
while synced. It was inactivated from the syncer thread.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Pollution from counter.h made __pcpu visible in amd64/pmap.c. Delete
the existing extern decl of __pcpu in amd64/pmap.c and avoid referring
to that symbol, instead accessing the pcpu region via PCPU_SET macros.
Also delete an unused extern decl of __pcpu from mp_x86.c.
Reviewed by: kib
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11666
P1022 and MPC8536 include a 'jog' feature for clock control
(jog being a slower form of run mode). This is done by changing the
PLL multiplier, and cannot be done if any core is in doze or sleep mode.
The generic support in netmap send the packets using if_transmit() and the
loopback do not support packets coming from if_transmit()/if_start().
This avoids the use of the loopback interface and the subsequent crash that
happens when the application send packets to the loopback interface.
Details in: https://github.com/luigirizzo/netmap/issues/322
Reported by: Vincenzo Maffione <v.maffione@gmail.com>
Sponsored by: Rubicon Communications, LLC (Netgate)
r320062 used nm_rsize, nm_wsize to set the maximum request/response sizes for
the NFSv4.1 session. If rsize,wsize are not specified as options, the
value of nm_rsize, nm_wsize is 0 at session creation, resulting in
values for request/response that are too small.
This patch fixes the problem. A workaround is to specify rsize=N,wsize=N
mount options explicitly, so they are set before session creation.
This bug only affects NFSv4.1 mounts against some non-FreeBSD servers.
MFC after: 1 week
r320062 used nm_rsize, nm_wsize to set the maximum request/response sizes for
the NFSv4.1 session. If rsize,wsize are not specified as options, the
value of nm_rsize, nm_wsize is 0 at session creation, resulting in
values for request/response that are too small.
This patch fixes the problem. A workaround is to specify rsize=N,wsize=N
mount options explicitly, so they are set before session creation.
This bug only affects NFSv4.1 mounts against some non-FreeBSD servers.
MFC after: 1 week
Clang 5.0.0 got better warnings about printf format strings using %zd,
and this leads to the following -Werror warning on e.g. arm:
sys/net/iflib.c:1517:8: error: format specifies type 'ssize_t' (aka 'int') but the argument has type 'bus_size_t' (aka 'unsigned long') [-Werror,-Wformat]
sctx->isc_tx_maxsize, nsegments, sctx->isc_tx_maxsegsize);
^~~~~~~~~~~~~~~~~~~~
sys/net/iflib.c:1517:41: error: format specifies type 'ssize_t' (aka 'int') but the argument has type 'bus_size_t' (aka 'unsigned long') [-Werror,-Wformat]
sctx->isc_tx_maxsize, nsegments, sctx->isc_tx_maxsegsize);
^~~~~~~~~~~~~~~~~~~~~~~
Fix this by casting bus_size_t arguments to uintmax_t, and using %ju
instead.
Reviewed by: emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D11679
Clang 5.0.0 got better warnings about print format strings using %zd,
and this leads to the following -Werror warning on e.g. arm:
sys/boot/efi/boot1/zfs_module.c:186:18: error: format specifies type 'ssize_t' (aka 'int') but the argument has type 'off_t' (aka 'long long') [-Werror,-Wformat]
"(%lu)\n", st.st_size, spa->spa_name, filepath, EFI_ERROR_CODE(status));
^~~~~~~~~~
Fix this by casting off_t arguments to intmax_t, and using %jd instead.
Reviewed by: tsoome
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D11678
This unbreaks the CDROM attaching on GEN2 VMs. On GEN1 VMs, CDROM is
attached to emulated ATA controller.
PR: 220790
Submitted by: Hongjiang Zhang <honzhan microsoft com>
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11634
- restore newer code for vf, i350, i210, i211
- restore dmac init code for i354 and i350
- restore WUC/WUFC update
- check for igb mac type before attempting trying to assert
a media changed event.
- handle link events for igb(4) and em(4) devices differently
and appropriately for their respective model types.
Submitted by: Matt Macy <mmacy@mattmacy.io>
Sponsored by: Limelight Networks
Without this change, modules will match the default compiler
configuration which may not be the same as the kernel values.
Reviewed by: imp
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11633
vm_radix trie.
Existing vm_radix_init() function is renamed to vm_radix_zinit().
Inlines moved out of the _ headers.
Reviewed by: alc, markj (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D11661
Commit message for r321173 incorrectly stated that the change disables
automatic stack growth from the AIO daemons contexts, with explanation
that this is currently prevents applying wrong resource limits. Fix
this by actually disabling the growth.
Noted by: alc
Reviewed by: alc, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
The description is FreeBSD-specific and was added in r266497
to fix PR189865.
PR: 220825
Submitted by: Fabian Keil
Obtained from: ElectroBSD
MFC after: 1 week
mps_wait_command() and mpr_wait_command() were using getmicrotime() to
determine elapsed time when checking for a timeout in polled mode.
getmicrotime() isn't guaranteed to monotonically increase, and that
caused spurious timeouts occasionally.
Switch to using getmicrouptime(), which does increase monotonically.
This fixes the spurious timeouts in my test case.
Reviewed by: slm, scottl
MFC after: 3 days
Sponsored by: Spectra Logic
It applies to both NFS client and NFS server, and is useful for both.
This is different from vfs.nfsd.enable_stringtouid, which is specific
to server side.
Reviewed by: rmacklem@
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
check blocking grow from other processes accesses.
Debugger may access stack grow area with ptrace(2). In this case,
real state of the process is to not have the stack grown, which
provides more accurate inspection. Technical reason to avoid the grow
is to avoid applying wrong process (debugger) stack limit.
This change also has a consequence of making aio workers accesses past
the bottom of stacks into EFAULT, arguably the situation is a
programmers mistake.
Reported by: jhb
Discussed with: alc, jhb
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
If we cannot get a phy, do not detach the driver, some boards have phy
always enabled and not exposed.
While here do not release the clocks if we fails as we release them
in a10_ehci_detach.
Tested-on: OrangePi-One
I overlooked the fact that vdev_op_io_done hook is called even if the
actual I/O is skipped, for example, in the case of a missing vdev.
Arguably, this could be considered an issue in the zio pipeline engine,
but for now I am adding defensive code to check for io_bp being NULL
along with assertions that that happens only when it can be really
expected.
PR: 220691
Reported by: peter, cy
Tested by: cy
MFC after: 1 week
X-MFC with: r320156, r320452
Propagate warning flags from kern.opts.mk and then fix minor -Werror
issues when building with gcc from -Wredundant-decls, -Wnested-externs,
-Wuninitialized.
Reviewed by: davidcs
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11413
ZPL_VERSION is unsigned long long, not an int. With this change, a zpool can be
created on a 32-bit system (tested on powerpcspe) and mounted correctly.
Reviewed by: allanjude
of-line whitespace, remove excessive whitespace and blank lines, remove
dead code, follow our standard style for function definitions, and
correct grammatical and factual errors in some of the comments.
Submitted by: Doug Moore <dougm@rice.edu>
MFC after: 1 week
It turns out the /next/ dragonflybsd git actually uses the scan channel list,
so just kick this along to make the next commit easier.
Obtained from: dragonflybsd.git 53a009d6f66108b40d622ed90ea95eba5c0e5432
From the original commit:
==
* Actually look at the first channel in the list. If it's a 2.4GHz channel,
set IWM_PHY_BAND_24 flag. The IWM_PHY_BAND_5 flag is 0 anyway, so we
don't need to look further.
* While there factor out the iwm_mvm_rrm_scan_needed() tlv capability check.
Taken-From: Linux iwlwifi
==
However, this only really does the latter. The sc_ic channel list isn't the
scan channel list, it's the /whole list/ for the set of active channels,
so I don't know what the right thing to do is here.
So I'll commit this as an intermediary commit and we'll have to revisit whether
to finish the refactor as-is.
Tested:
* Intel 7260, STA mode
Obtained from: dragonflybsd.git 53a009d6f66108b40d622ed90ea95eba5c0e5432
- Deal with changes to port_type, and not just port_mod when a
transceiver is changed. This fixes hot swapping of transceivers of
different types (QSFP+ or QSA or QSFP28 in a QSFP28 port, SFP+ or
SFP28 in a SFP28 port, etc.).
- Always refresh media information for ifconfig if the port is down.
The firmware does not generate tranceiver-change interrupts unless at
least one VI is enabled on the physical port. Before this change
ifconfig diplayed potentially stale information for ports that were
administratively down.
- Always recalculate and reapply L1 config on a transceiver change.
- Display PAUSE settings in ifconfig. The driver sysctls for this
continue to work as well.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
that start in 1970, assume most conversions are going to be for recent dates
and use a precomputed number of days through the end of 2016.
This is a do-over of r320997, hopefully this time with 100% more workiness.
The first attempt had an off-by-one error, but instead of just adding
another mysterious +1 adjustment, this rearranges the relationship between
recent_base_year and recent_base_days so that the latter is the number of
days that occurred before the start of the associated year (instead of the
count thru the end of that year). This makes the recent_base stuff work
more like the original loop logic that didn't need any +1 adjustments.
While there, appropriately handle the overhead depending on
the usage of DATA or I-DATA chunks. Take the overhead only
into account, when required.
Joint work with rrs@
MFC after: 1 week
this file. Previously, half of the pointers to a vm_page being used as
a page directory page were named "pdpg" and the rest were named "mpde".
Discussed with: kib
MFC after: 1 week
pmap_remove_ptes(). (This new function will also be used by an upcoming
change to pmap_enter() that adds support for psind == 1 mappings.)
Submitted by: Yufeng Zhou <yz70@rice.edu> (an earlier version)
Reviewed by: kib, markj
MFC after: 1 week
This appears to have been an oversight in r213536.
Reviewed by: markj
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11521
the IO type (Admin or NVM) using XPT op-codes XPT_NVME_ADMIN or
XPT_NVME_IO.
Submitted by: Chuck Tuffli <chuck@tuffli.net>
Differential Revision: https://reviews.freebsd.org/D10247
Using the https://github.com/google/capsicum-test/ suite, the
PosixMqueue.CapModeForked test was failing due to an ECAPMODE after
calling kmq_notify(). On further inspection, the dynamically
loaded syscall entry was initialized with sy_flags zeroed out, since
SYSCALL_INIT_HELPER() left sysent.sy_flags with the default value.
Add a new helper SYSCALL{,32}_INIT_HELPER_F() which takes an
additional argument to specify the sy_flags value.
Submitted by: Siva Mahadevan <smahadevan@freebsdfoundation.org>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D11576
Fix minor -Werror issues when building with gcc from -Wredundant-decls,
-Wunused, -Wbool-operations. Also ensure the M_IXL malloc type is only
defined once.
Reviewed by: efj
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11414
This also avoids compiling in pci_iov support into the kernel if_ixoif
the PCI_IOV option is disabled.
Reviewed by: rstone
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11573
From Brett:
In short, busdma maps for received packets were not being unloaded in the
interrupt handler before the packets were passed up the network stack. The fix
was to add a busdma sync and unload for the two receive maps.
This bug is significant for certain busdma providers, for example IOMMUs,
where not unloading the maps means that 1) the IOMMU mappings that allow the
NIC to DMA the received packets into host memory stay open indefinitely,
potentially violating a desired security policy, and 2) resources such as
device address space addresses and host memory for bookkeeping are never freed.
Without an IOMMU or bounce buffering enabled for the ixl device, I don't think
adding these calls will have any significant performance impact. With the
IOMMU enabled, I have noticed a performance impact on the receive side, which
is expected.
Submitted by: Brett Gutstein <bgutstein@rice.edu>
Reviewed by: erj@
MFC after: 1 week
Also add some checks for overflow to existing functions.
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11533
Previously, GRE packets in IPv6 tunnels would be dropped by IPFW (unless
net.inet6.ip6.fw.deny_unknown_exthdrs was unset).
PR: 220640
Submitted by: Kun Xie <kxie@xiplink.com>
MFC after: 1 week
It turns out that this is more than a power optization. The OTG port
won't work on boards that have this property unless this setting is honored.
Also ensure that the usb phy device attaches before ehci.
This was a regression in r320220 due to improper porting of the
same logic from share/mk/bsd.dep.mk and having only tested with
-DNO_FILEMON at the time.
Pointyhat to: bdrewery
Reported by: Mark Millard, dhw, O. Hartmann
Sponsored by: Dell EMC Isilon
Make the %b formatter accept number formatting flags. It will now accept
alternate form, precision, and length modifiers. It also now partially
supports field width (but forces left justification).
Reviewed by: markj
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11284
on clock drivers.
This tracks multiple concurrent realtime clock drivers in a list sorted by
clock resolution. When system time changes (and periodically) the
clock_settime() methods of all registered clocks are invoked.
To initialize system time, each driver is tried in turn from best to worst
resolution, until one succesfully returns a valid time.
The code no longer holds a mutex while calling the clock_settime() and
clock_gettime() methods of the registered clocks. This allows clock drivers
to do whatever kind of locking or sleeping is necessary (this is especially
important for i2c clock chips since i2c drivers often need to sleep).
A new clock_register_flags() function allows the clock driver to pass
flags. The flags currently defined help support drivers that use their own
techniques to avoid roundoff errors (prevents the 4/5 rounding done by the
subr_rtc code). A driver which may need to wait for resources (such as bus
ownership) may pass a flag to indicate that it will obtain system time for
itself after waiting for resources; this is merely an optimization to avoid
the common code retrieving a timespec that will never get used.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D11484
The mutex protecting access to the registered realtime clock should not be
overloaded to protect access to the atrtc hardware, which might not even be
the registered rtc. More importantly, the resettodr mutex needs to be
eliminated to remove locking/sleeping restrictions on clock drivers, and
that can't happen if MD code for amd64 depends on it. This change moves the
protection into what's really being protected: access to the atrtc date and
time registers.
This change also adds protection when the clock is accessed from
xentimer_settime(), which bypasses the resettodr locking.
Differential Revision: https://reviews.freebsd.org/D11483
Update filesystems not currently using vop_stdpathconf() in pathconf
VOPs to use vop_stdpathconf() for any configuration variables that do
not have filesystem-specific values. vop_stdpathconf() is used for
variables that have system-wide settings as well as providing default
values for some values based on system limits. Filesystems can still
explicitly override individual settings.
PR: 219851
Reported by: cem
Reviewed by: cem, kib, ngie
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D11541
This allows multiple instances of SoCs that use the pl310 driver to be
built within the same kernel:
* Add access to the platform_t object from outside platform.c
* Use this with the pl310 driver
There is a new platform_pl310 interface to replace the existing code. SoCs
need to implement the init method, and if they have special requirements to
write to the two registers we care about will also need to implement the
write_ctrl and write_debug methods.
Differential Revision: https://reviews.freebsd.org/D11546
The iteration index is unsigned, so testing for larger than or equal
to zero makes little sense.
Submitted by: Sebastian Huber <sebastian.huber@embedded-brains.de>
MFC after: 3 days
code was used, so the lightness bit was not flipped, so the flipping
was unnecessarily null in some cases. E.g., the unusal color scheme
of lightwhite on white (white = lightgrey in kernelspeak) is not
completely unusable, except null flipping of it gave no visible marks
for cut marking. Now flipping it works in pixel mode only.
Fix text cursor attribute adjustment over cut marking in text mode for
the usual cursor type (non-blinking full block). Apply the flipping
for cut marking first and adjust that instead of vice versa. This
gives a uniform color scheme for the usual text cursor type in text
mode: a white block background with no change to the character
foreground except for variations to avoid collisions. The old order
gave a white character fg with no change in the bg in non-colliding
cases. Versions before r316636 changed the bg to the non-cut-marked
one about half the time using a saveunder bug; this accidentally gave
something resembling a block cursor half the time.
pf_purge_thread() breaks up the work of iterating all states (in
pf_purge_expired_states()) and tracks progress in the idx variable.
If multiple vnets exist this results in pf_purge_thread() only calling
pf_purge_expired_states() for part of the states (the first part of the
first vnet, second part of the second vnet and so on).
Combined with the mark-and-sweep approach to cleaning up old rules (in
V_pf_unlinked_rules) that resulted in pf freeing rules that were still
referenced by states. This in turn caused panics when pf_state_expires()
encounters that state and attempts to access the rule.
We need to track the progress per vnet, not globally, so idx is moved
into a per-vnet V_pf_purge_idx.
PR: 219251
Sponsored by: Hackathon Essen 2017
This emulated device attaches to the ISA bus and registers itself as
HBA supporting MMC/SD cards. This allows to develop and test MMC XPT
and MMC / SDIO peripheral drivers even in the VM such as bhyve.
Submitted by: Ilya Babulin
Implement the MMC/SD/SDIO protocol within a CAM framework. CAM's
flexible queueing will make it easier to write non-storage drivers
than the legacy stack. SDIO drivers from both the kernel and as
userland daemons are possible, though much of that functionality will
come later.
Some of the CAM integration isn't complete (there are sleeps in the
device probe state machine, for example), but those minor issues can
be improved in-tree more easily than out of tree and shouldn't gate
progress on other fronts. Appologies to reviews if specific items
have been overlooked.
Submitted by: Ilya Bakulin
Reviewed by: emaste, imp, mav, adrian, ian
Differential Review: https://reviews.freebsd.org/D4761
merge with first commit, various compile hacks.
Reported by: antoine
Tested by: Stefan Ehmann <shoesoft@gmx.net>,
Jan Kokemueller <jan.kokemueller@gmail.com>
PR: 220493
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Notable changes:
Allwinner:
* H3/H5 were merged into a common dtsi file
* include/dt-bindings/sun4i-a10.h is not included anymore
in a lot of dts files
* Add sun8i-h3-nanopi-neo-air board DTS file
text cursors to functions so that it is easier to fix and improve.
This commit doesn't fix anything except for removing unnecessary
complications and adding comments.
Access to the dri device gives effectively access to the entire memory of the machine (you can program
the graphic card to do DMA).
For current/stable/release this is a NOP, as access to memory is not allowed in a jail. This puts the dri
device into the same (in)security class than /dev/mem for future use.
Discussed with: anholt(?) several years ago
Sponsored by: Hackathon Essen 2017
have available to use in the future.
- Add kmem_access flag as a placeholder (reserve it), not used yet.
Differential Revision: D11451
Reviewed by: jamie
Sponsored by: Hackathon Essen 2017
