journaling and can be tought about marking file system as clean before
doing journal switch, which easly allows to add journaling to file
systems that don't have this feature.
Sponsored by: home.pl
This bug results in data corruption with NFS/TCP. Writes are silently dropped
on EWOULDBLOCK (because socket send buffer is full and sockbuf timer fires).
Reviewed by: ups@
during detach() similar to other NIC drivers rather than allocating them
during init() and freeing them during stop():
- Move creation of tx bus_dma tag amd maps and tx_buffer_area from
em_setup_transmit_structures() to em_allocate_transmit_structures().
- Call em_allocate_xxx_structures() in em_attach().
- Only call em_free_xxx_structures() in em_detach().
- Change em_setup_xxx_structures() to free any existing tx or rx buffers
and in the case of rx repopulate the ring with newer buffers.
Reviewed by: jfv
the EOP descriptor in the first descriptor of the packet. And then
in em_txeof() search for DD bits set only in the EOP descriptors,
embedding the cleanup of all packet's descriptors into inner loop.
This change is important for future chips, where DD bit is going
to be set only on the EOP descriptors.
Submitted by: jfv
Details:
o if_em.c changes:
- Added several new PCI ids.
- Check em_check_phy_reset_block() before doing SIOCSIFMEDIA ioctl.
- Don't touch TARC registers, they are now handled in shared
code in if_em_hw.c.
- Move RDH and RDT setting to the end of
em_initialize_receive_unit().
- Declare em_read_pcie_cap_reg(), now empty.
o if_em_hw.c dropped in from vendor, then restored rev. 1.15.
o if_em_hw.h dropped in from vendor, then modified:
- Added RX overrun interrupt flag to interrupt enable mask.
- Remove declarations of em_io_read(), em_io_write().
Approved by: jfv
the CAM_NEW_TRAN_CODE that has been in the tree for some years now.
This first step consists solely of adding to or correcting
CAM_NEW_TRAN_CODE pieces in the kernel source tree such
that a both a GENERIC (at least on i386) and a LINT build
with CAM_NEW_TRAN_CODE as an option will compile correctly
and run (at least with some the h/w I have).
After a short settle time, the other pieces (making
CAM_NEW_TRAN_CODE the default and updating libcam
and camcontrol) will be brought in.
This will be an incompatible change in that the size of structures
related to XPT_PATH_INQ and XPT_{GET,SET}_TRAN_SETTINGS change
in both size and content. However, basic system operation and
basic system utilities work well enough with this change.
Reviewed by: freebsd-scsi and specific stakeholders
argument in parentheses so these macros are safe to use and invocations
with an expression as the argument like __bswap32_const(42 << 23 | 13)
work as expected. Additionally, mask all the individually shifted bytes
as appropriate so the bytes which exceed the width of the respective
__bswapN_const() macro in invocations like __bswap16_const(0xdead600d)
are ignored like it's the case with the corresponding __bswapN_var()
function.
MFC after: 3 days
only those bars that had addresses assigned by the BIOS and where the
bridges were properly programmed. Now even unprogrammed ones work.
This was needed for sun4v. We still only implement up to 2GB memory
ranges, even for 64-bit bars. PCI standards at least through 2.2 say
that this is the max (or 1GB is, I only know it is < 32bits).
o Always define pci_addr_t as uint64_t. A pci address is always 64-bits,
but some hosts can't address all of them.
o Preserve the upper half of the 64-bit word during resource probing.
o Test to make sure that 64-bit values can fit in a u_long (true on some
platforms, but not others). Don't use those that can't.
o minor pedantry about data sizes.
o Better bridge resource reporting in bootverbose case.
o Minor formatting changes to cope with different data types on different
platforms.
Submitted by: jmg, with many changes by me to fully support 64-bit
addresses.
Though it is named after overclocking tool for ASUS motherboards,
it is not capable to change clock ratio or CPU core voltage.
This driver exports Templature, Power output voltage, Fan RPM under
dev.acpi_aiboost.0.*.
Descriptions for these values are set to sysctl describe, which can be
get by sysctl -d.
in #ifdef __NO_STRICT_ALIGNMENT rather than #ifdef __i386__. This
means that amd64 now also uses the optimized code. [1]
While at it, fix a nearby style(9) bug.
- Remove the hw.dc_quick SYSCTL, which allowed to turn off the above
mentioned optimization, as like the equivalent and already removed
- In dc_setcfg() suppress printing a warning when forcing the receiver
and transceiver to idle state times out for chips where the status
bits in question just never change (observed in detail with DM9102A)
and therefore the warning would be highly likely false positive. [2]
- In dc_ifmedia_sts() add a missing DC_UNLOCK().
Tested by: Hans-Joerg Sirtl on amd64 [1]
PR: 82681 [2]
Obtained from: NetBSD tlp(4) [2]
MFC after: 1 week
in #ifdef __NO_STRICT_ALIGNMENT rather than #if defined(__i386__) ||
defined(__amd64__). Currently this change is cosmetic only though.
While at it, fix a nearby style(9) bug and remove a no longer used
header.
are no longer limited to a virtual address space of 16 megabytes,
only mask high two bits of a virtual address. This allows to load
larger kernels (up to 1 gigabyte). Not masking addresses at all
was a bad idea on machines with less than >3G of memory -- kernels
are linked at 0xc0xxxxxx, and that would attempt to load a kernel
at above 3G. By masking only two highest bits we stay within the
safe limits while still allowing to boot larger kernels.
(This is a safer reimplmentation of sys/boot/i386/boot2/boot.2.c
rev. 1.71.)
Prodded by: jhb
Tested by: nyan (pc98)
dynamic nature (if no native aio code is available, the linux part
returns ENOSYS because of missing requisites) should be solved differently
than it is.
All this will be done in P4.
Not included in this commit is a backout of the changes to the native aio
code (removing static in some places). Those changes (and some more) will
also be needed when the reworked linux aio stuff will reenter the tree.
Requested by: rwatson
Discussed with: rwatson
- Pay respect to net.isr.direct: use netisr_dispatch() instead of ip_input()
Reviewed by: glebius, rwatson
- purge_flow_set():
- Do not leak memory while purging queues which are not bound to pipe.
- style(9) cleanup
MFC after: 2 months
not completely decided at config time. Just don't default to using
the TSC if there are multiple active CPUs. Also, don't default to
using the TSC if it is broken. SMP ifdefs are still used to disallow
using perfmon since perfmon is always broken if SMP is just configured.
This only helps much for SMP kernels running on 1 CPU. The overheads
for using the i8254 cputime clock were a bit too high on 486/33's, and
now on multi-GHz CPUs they are usually in the 99-99.9% range. Switching
from the old default of an i8254 clock to the TSC works poorly because
the overheads are not recalibrated.
Use the same condition for declaring perfmon stuff as for using it.
Call vfs_setdirty_locked_object() from vfs_busy_pages() instead of
vfs_setdirty(), thereby eliminating a second acquisition and release
of the same vm object lock.
queues lock to BIO_READ operations. Recent changes to the implementation
of the per-page flags have eliminated the need for the page queues lock
in the other cases.
- Don't use a frame pointer. Our callers need a frame pointer, but we
could only use one to support things that aren't supported. (These
things are:
- profiling of profiling
- debugging of profiling. The core ENTRY() macro doesn't support
forcing a frame pointer for debugging, so don't do more here.)
- Ensure that we are in the text section and have normal alignment.
- Use the normal syntax for `.type'.
Fixed a syntax error for the (!__KERNEL && !__GNUCLIKE_ASM) case in
rev.1.36. Apparently, this case has never been reached even by lint.
Submitted by: stefanf
{amd64,i386}/include/profile.h:
In case the above case is actually reached, break it properly by
providing null support that will fail at link time instead of a stub
that gives wrong (null) profiling at runtime.
Rename MAX_SAMPLE_RATES macro to OSS_MAX_SAMPLE_RATES. The old
macro clashed with those used in other applications and libaries
(ex: RtAudio). 4Front responded by updating their spec, so we
will follow suit.
Submitted by: ryanb
Noticed by: pointyhat/kris
was only used in the GUPROF case, so the messes to get its i386 prerequisites
included shouldn't have been needed.
Fixed some style bugs. Quote #error contents, and don't repeat an #error
directive on amd64.
this used to be slightly cleaner than using ifdefs in a few places to
support both a.out and elf, but using it now just causes messes and
unportabilities. It seems to be impossible to implement the elf
HIDENAME() portably in cpp (since token pasting of "." and <name> is
invalid).
*/prof_machdep.c:
- Removed all uses of CNAME(). CNAME() is easy enough to use in pure
asm code, but using it in inline asm requires messy quoting. The
core pure asm code has been hacked on more and all uses of CNAME() in
it have already gone away. Just assume the elf convention here too.
- Removed now-uneeded include of <machine/asmacros.h>.
- Removed the workaround for a namespace conflict with this include.
new device support, and it is hoped a more stable driver for 6.2. RELEASE.
This checkin was discussed and approved today by RE, scottl, jhb, and pdeuskar
profiling is configured but high resolution profiling is not configured.
Only functions in *.[Ss] called the stub, so efficiency was not
significantly affected.
net.inet.ip.dummynet.curr_time
net.inet.ip.dummynet.searches
net.inet.ip.dummynet.search_steps
to SYSCTL_LONG nodes. It will prevent frequent wrap around on 64bit archs.
- Implement simple mechanics for dummynet(4) internal time correction.
Under certain circumstances (system high load, dummynet lock contention, etc)
dummynet's tick counter can be significantly slower than it should be.
(I've observed up to 25% difference on one of my production servers).
Since this counter used for packet scheduling, it's accuracy is vital for
precise bandwidth limitation.
Introduce new sysctl nodes:
net.inet.ip.dummynet.
tick_lost - number of ticks coalesced by taskqueue thread.
tick_adjustment - number of time corrections done.
tick_diff - adjusted vs non-adjusted tick counter difference
tick_delta - last vs 'standard' tick differnece (usec).
tick_delta_sum - accumulated (and not corrected yet) time
difference (usec).
Reviewed by: glebius
MFC after: 2 month
