These command take an int. The tests work by accident on little-endian,
64-bit systems.
PR: 218919
Tested with: qemu-cheri and CheriBSD built for mips64
Reviewed by: asomers, ngie
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D10518
available and if that is true make use of them.
Thank you very much to Andrew Turner for providing help and review the patch!
Reviewed by: andrew
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10499
This test was failing if run twice because rtadvd takes too long to die.
The rtadvd process from the first run was still running when the
second run created its interfaces. The solution is to use SIGKILL during
the cleanup instead of SIGTERM so rtadvd will die faster.
While I'm here, randomize the addresses used for the test, which makes bugs
like this easier to spot, and fix the cleanup order to be the opposite of
the setup order
PR: 217871
MFC after: 18 days
X-MFC-With: 315458
Sponsored by: Spectra Logic Corp
A couple of the ptrace tests make assumptions about which thread in a
multithreaded process will run after a halt. This makes the tests less
portable across branches, and susceptible to future breakage. Instead,
twiddle thread scheduling and priorities to match the tests'
expectation.
X-MFC with: r313992
Sponsored by: Dell EMC
sys/netinet6/icmp6.c
Use the interface's FIB for source address selection in ICMPv6 error
responses.
sys/netinet6/in6.c
In in6_newaddrmsg, announce arrival of local addresses on the
interface's FIB only. In in6_lltable_rtcheck, use a per-fib ND6
cache instead of a single cache.
sys/netinet6/in6_src.c
In in6_selectsrc, use the caller's fib instead of the default fib.
In in6_selectsrc_socket, remove a superfluous check.
sys/netinet6/nd6.c
In nd6_lle_event, use the interface's fib for routing socket
messages. In nd6_is_new_addr_neighbor, check all FIBs when trying
to determine whether an address is a neighbor. Also, simplify the
code for point to point interfaces.
sys/netinet6/nd6.h
sys/netinet6/nd6.c
sys/netinet6/nd6_rtr.c
Make defrouter_select fib-aware, and make all of its callers pass in
the interface fib.
sys/netinet6/nd6_nbr.c
When inputting a Neighbor Solicitation packet, consider the
interface fib instead of the default fib for DAD. Output NS and
Neighbor Advertisement packets on the correct fib.
sys/netinet6/nd6_rtr.c
Allow installing the same host route on different interfaces in
different FIBs. If rt_add_addr_allfibs=0, only install or delete
the prefix route on the interface fib.
tests/sys/netinet/fibs_test.sh
Clear some expected failures, but add a skip for the newly revealed
BUG217871.
PR: 196361
Submitted by: Erick Turnquist <jhujhiti@adjectivism.org>
Reported by: Jason Healy <jhealy@logn.net>
Reviewed by: asomers
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9451
The ptrace() user has the option of discarding the signal. In such a
case, p_ptevents should not be modified. If the ptrace() user decides to
send a SIGKILL, ptevents will be cleared in ptracestop(). procfs events
do not have the capability to discard the signal, so continue to clear
the mask in that case.
Reviewed by: jhb (initial revision)
MFC after: 1 week
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9939
This change moves the tests added in r313962 to an existing directory
structure used by the geli TAP tests. It also, renames the test from
pbkdf2 to pbkdf2_test .
The changes to ObsoleteFiles.inc are being committed separately as they
aren't needed for the MFC to ^/stable/11, etc, if the MFC for the tests
is done all in one commit.
MFC after: 2 weeks
X-MFC with: r313962, r313972-r313973
Reviewed by: allanjude
Sponsored by: Dell EMC Isilon
Differential Revision: D9985
Suppose a traced process is stopped in ptracestop() due to receipt of a
SIGSTOP signal, and is awaiting orders from the tracing process on how
to handle the signal. Before sending any such orders, the tracing
process exits. This should kill the traced process. But suppose a second
thread handles the SIGKILL and proceeds to exit1(), calling
thread_single(). The first thread will now awaken and will have a chance
to check once more if it should go to sleep due to the SIGSTOP. It must
not sleep after P_SINGLE_EXIT has been set; this would prevent the
SIGKILL from taking effect, leaving a stopped orphan behind after the
tracing process dies.
Also add new tests for this condition.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D9890
Tests that an interface can get a SLAAC address and that it inserts its
routes into the correct fib. Does not test anything to do with NDP.
PR: 196361
Reviewed by: Erick Turnquist <jhujhiti@adjectivism.org>
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9776
In the Kyua era, it's no longer necessary to set PJDFSTEST_TEST_PATH. Just
use TMPDIR instead.
Reviewed by: ngie
MFC after: 3 weeks
Relnotes: yes
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D9340
When a thread is stopped in ptracestop(), the ptrace(2) user may request
a signal be delivered upon resumption of the thread. Heretofore, those signals
were discarded unless ptracestop()'s caller was issignal(). Fix this by
modifying ptracestop() to queue up signals requested by the ptrace user that
will be delivered when possible. Take special care when the signal is SIGKILL
(usually generated from a PT_KILL request); no new stop events should be
triggered after a PT_KILL.
Add a number of tests for the new functionality. Several tests were authored
by jhb.
PR: 212607
Reviewed by: kib
Approved by: kib (mentor)
MFC after: 2 weeks
Sponsored by: Dell EMC
In collaboration with: jhb
Differential Revision: https://reviews.freebsd.org/D9260
committed in r313972
The code committed in r313962 implicitly relies on python 2.x to generate
testvect.h . There are a handful of issues with this approach:
- python is not an explicit build dependency for FreeBSD
- python 2.x is deprecated and will be removed sometime in the future
(potentially before 11.x's EOL), and the script does not function with
python 3.5 (it uses deprecated idioms and incompatible function calls).
- python(1) (by default) lives in /usr/local/bin (${LOCALBASE}/bin) and
gentestvect.py is a dependency of testvect.h (prior to r313972) which
means that if the mtime of the generator script was newer than the
mtime of the test vector, it could cause a spurious build failure in
build time or at install time.
A better solution using C/C++ should be devised.
Discussed with: allanjude
MFC after: 2 weeks
X-MFC with: r313962, r313972
Sponsored by: Dell EMC Isilon
Using relative paths imply working directory (in this case .OBJDIR), whereas the
sources live in the .CURDIR-relative path.
MFC after: 2 weeks
X-MFC with: r313962
Pointyhat to: allanjude
Sponsored by: Dell EMC Isilon
The PBKDF2 in sys/geom/eli/pkcs5v2.c is around half the speed it could be
GELI's PBKDF2 uses a simple benchmark to determine a number of iterations
that will takes approximately 2 seconds. The security provided is actually
half what is expected, because an attacker could use the optimized
algorithm to brute force the key in half the expected time.
With this change, all newly generated GELI keys will be approximately 2x
as strong. Previously generated keys will talk half as long to calculate,
resulting in faster mounting of encrypted volumes. Users may choose to
rekey, to generate a new key with the larger default number of iterations
using the geli(8) setkey command.
Security of existing data is not compromised, as ~1 second per brute force
attempt is still a very high threshold.
PR: 202365
Original Research: https://jbp.io/2015/08/11/pbkdf2-performance-matters/
Submitted by: Joe Pixton <jpixton@gmail.com> (Original Version), jmg (Later Version)
Reviewed by: ed, pjd, delphij
Approved by: secteam, pjd (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8236
Some recent changes to vm related to mmap(2) have broken the prot checks that
would result with an EINVAL with this case
I suspect r313352 is the root-cause the issue
PR: 216976
Sponsored by: Dell EMC Isilon
results of commands
As noted in r313008, the underlying issue was that geom_gate device
creation wasn't created at ggatel command completion, but some short
time after. ggatec(8) employs similar logic when creating geom_gate(4)
devices.
Switch from retry loops (after the ggatec/dd write calls) to
wait_for_ggate_device function calls after calling ggatec(8) instead
to detect the presence of the /dev/ggate* device, as this function is
sufficient for determining whether or not the character device is ready
for testing
While here, use atf_check consistently with all dd calls to ensure that
data output is as expected.
MFC after: 1 week
Reviewed by: asomers
Differential Revision: D9409
Sponsored by: Dell EMC Isilon
The test assumed that `ggatel create` created a device on completion, but that's
incorrect. This squashes the race by waiting for the device to appear, as
`ggatel create` daemonizes before issuing an ioctl to geom_gate(4) if not called
with `-v`.
Discussed with: asomers
MFC after: 1 week
PR: 204616
Sponsored by: Dell EMC Isilon
Derived from an implementation by Mark Adler.
The fast loop performs three simultaneous CRCs over subsets of the data
before composing them. This takes advantage of certain properties of
the CRC32 implementation in Intel hardware. (The CRC instruction takes 1
cycle but has 2-3 cycles of latency.)
The CRC32 instruction does not manipulate FPU state.
i386 does not have the crc32q instruction, so avoid it there. Otherwise
the implementation is identical to amd64.
Add basic userland tests to verify correctness on a variety of inputs.
PR: 216467
Reported by: Ben RUBSON <ben.rubson at gmail.com>
Reviewed by: kib@, markj@ (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D9342
* Add tests for aio_suspend(2).
* Add tests for polled completion notification.
* Test the full matrix of file descriptor types and completion notification
mechanisms.
* Don't bother with mkstemp, because ATF runs every test in its own temp dir.
* Fix some typos.
* Remove extraneous ATF_REQUIRE_KERNEL_MODULE calls.
Reviewed by: jhb
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D9045
between exp(3) and `exp` var.
The approach taken previously was not ideal for multiple
functional and stylistic reasons.
Add to existing sed call in Makefile to replace `exp` with
`exponent` instead.
MFC after: 13 days
Requested by: bde
The primary goal for doing this is to leverage the work done in r312114
for enabling WARNS to address trivial code quality issues with new tests
MFC after: 6 days
Tested with: make tinderbox
Sponsored by: Dell EMC Isilon
The primary goal for doing this is to leverage the work done in r312114
for enabling WARNS to address trivial code quality issues with new tests
MFC after: 6 days
Tested with: make tinderbox
Sponsored by: Dell EMC Isilon
Use %zu for printing out results from nitems, as it's size_t based
MFC after: 1 week
X-MFC with: r312120
Reported by: gcc (mips:mipsel tinderbox)
Sponsored by: Dell EMC Isilon
State that execve failed instead of just printing out the program name
and strerror(errno) via err(3).
MFC after: 3 days
X-MFC with: r312118
Sponsored by: Dell EMC Isilon
Don't implement some terrible hack on a test by test basis. The
framework fix is straightforward and can be chased up in the original
bug.
Reviewed by: ngie ("be my guest")
This ensures their cleanup routines will be run even if they should timeout.
tests/sys/geom/class/gate/ggate_test.sh
tests/sys/geom/class/gate/Makefile
Add an ATF test with three testcases, one for each TAP test. Use
ATF-style cleanup functions, and convert sleeps to polling loops.
ObsoleteFiles.inc
tests/sys/geom/class/gate/conf.sh
tests/sys/geom/class/gate/1_test.sh
tests/sys/geom/class/gate/2_test.sh
tests/sys/geom/class/gate/3_test.sh
Delete TAP test files
Reviewed by: ngie
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D8891
The tests don't work when reading/writing to file descriptors in the
sandbox after entering capability mode (and wouldn't have, regardless
of the framework), so adjust the tests so they function within the
framework.
For tests that enter capability mode over the course of the test, the
following is now done:
1. Fork child process for capability mode test.
2. In child...
i. Enter capability mode.
ii. Test invariants.
iii. Exit after calling test function.
3. Collect status for child and determine whether or not it completed
successfully.
In order to test the invariants in the child process, they now use assert(3)
instead of ATF_REQUIRE*, as the atf-c-api functions right to results files
in the directories in order to determine where and how tests fail.
While in the area, fix several -Wshadow and -Wunused warnings found when I
bumped WARNS up to 6, and fix some minor style(9) issues with indentation
and type alignment.
PR: 215690
Also, add test cases for the -p, -P, and -s options to gnop create
Reviewed by: ngie
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D8892
There is no reduction in test coverage. On my system runtime is reduced
from 38m32s to 6m24s.
tests/sys/geom/class/eli/conf.sh
tests/sys/geom/class/eli/init_a_test.sh
tests/sys/geom/class/eli/init_test.sh
tests/sys/geom/class/eli/integrity_copy_test.sh
tests/sys/geom/class/eli/integrity_data_test.sh
tests/sys/geom/class/eli/integrity_hmac_test.sh
tests/sys/geom/class/eli/onetime_a_test.sh
tests/sys/geom/class/eli/onetime_test.sh
Move the looping code into common functions in conf.sh, and remove
alias ciphers from the list.
tests/sys/geom/class/eli/init_a_test.sh
tests/sys/geom/class/eli/init_test.sh
tests/sys/geom/class/eli/integrity_copy_test.sh
tests/sys/geom/class/eli/integrity_data_test.sh
tests/sys/geom/class/eli/integrity_hmac_test.sh
tests/sys/geom/class/eli/onetime_a_test.sh
Move a few commands that don't need to be in the inner loop out.
tests/sys/geom/class/eli/init_test.sh
tests/sys/geom/class/eli/onetime_a_test.sh
Reduce the sector count
tests/sys/geom/class/eli/Makefile
tests/sys/geom/class/eli/init_alias_test.sh
Add a test for initializing a GELI device using one of the cipher
aliases, and check that the alias is correctly interpreted.
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D8814
Note: this test still requires binutils readelf (from ports) to pass, until a
few issues are resolved in elftoolchain.
PR: 215019
Reported by: ngie@
Sponsored by: Dell EMC Isilon
Changes were made to ZFS in the past year with respect to how ACLs
are handled, causing failures in this test. Mark it TODO so (hopefully)
someone more knowledgeable (like mav or trasz) will fix the code or the
test.
PR: 212323
The requirement is set via `atf_set "require.config" "allow_sysctl_side_effects"',
not `atf_set "require.config" "allow_sysctl_side_effects"'
X-MFC with: r308177
Pointyhat to: cmeyer
have both big and little-endian images in tree).
Also we don't known the endianness of the platform the
image was generated on.
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
file descriptor for the given posix mqueue. Export the
timer_oshandle_np() symbol to get ktimer id for the given posix timer.
Requested by: Lewis Donzis <lew@perftech.com>
Reviewed by: jilles
Discussed with: kan
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This is a safety belt to ensure that the /tmp sticky bit stuff doesn't
get whacked by accident if someone runs the script outright
MFC after: 1 week
X-MFC with: r305916
Sponsored by: Dell EMC Isilon
This is required to ensure that the temporary script can be executed,
as the default mode is apparently too restrictive
MFC after: 3 days
Sponsored by: Dell EMC Isilon
If wait4() or wait6() return 0 because of WNOHANG, the status, rusage and
wrusage information should not be returned.
PR: 212048
Reported by: Casey Lucas
MFC after: 2 weeks
This is being done to clearly distinguish the libkqueue tests
from the (soon to be imported) NetBSD tests.
MFC after: 58 days
Sponsored by: EMC / Isilon Storage Division
This will make the exit info more meaningful if/when zpool create fails,
and establishes parity with the other 2 zfs acl testcases (01, 03).
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
Change the vnode tests to use the current directory when creating temporary
files, which we can assume is a volatile work directory, and then make the
kqueue_test.sh driver _not_ abandon the directory created by Kyua.
This makes the various kqueue tests independent of each other, and ensures
the temporary file is cleaned up on failure.
Problem spotted by asomers@ when reviewing D4254.
- Use correct lock in aio_cancel_sync when dequeueing job.
- Add _locked variants of aio_set/clear_cancel_function and use those
to avoid lock recursion when adding and removing fsync jobs to the
per-process sync queue.
- While here, add a basic test for aio_fsync().
PR: 211390
Reported by: Randy Westlund <rwestlun@gmail.com>
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7339
First, PL_FLAG_FORKED events now also set a PL_FLAG_VFORKED flag when
the new child was created via vfork() rather than fork(). Second, a
new PL_FLAG_VFORK_DONE event can now be enabled via the PTRACE_VFORK
event mask. This new stop is reported after the vfork parent resumes
due to the child calling exit or exec. Debuggers can use this stop to
reinsert breakpoints in the vfork parent process before it resumes.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7045
ptrace() now stores a mask of optional events in p_ptevents. Currently
this mask is a single integer, but it can be expanded into an array of
integers in the future.
Two new ptrace requests can be used to manipulate the event mask:
PT_GET_EVENT_MASK fetches the current event mask and PT_SET_EVENT_MASK
sets the current event mask.
The current set of events include:
- PTRACE_EXEC: trace calls to execve().
- PTRACE_SCE: trace system call entries.
- PTRACE_SCX: trace syscam call exits.
- PTRACE_FORK: trace forks and auto-attach to new child processes.
- PTRACE_LWP: trace LWP events.
The S_PT_SCX and S_PT_SCE events in the procfs p_stops flags have
been replaced by PTRACE_SCE and PTRACE_SCX. PTRACE_FORK replaces
P_FOLLOW_FORK and PTRACE_LWP replaces P2_LWP_EVENTS.
The PT_FOLLOW_FORK and PT_LWP_EVENTS ptrace requests remain for
compatibility but now simply toggle corresponding flags in the
event mask.
While here, document that PT_SYSCALL, PT_TO_SCE, and PT_TO_SCX both
modify the event mask and continue the traced process.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D7044
setting a 32 bit value on each socket. This can be used by applications
and DTrace as a rendezvous point so that an applicaton's data can
more easily be captured at run time. Expose the user cookie via
DTrace by updating the translator in tcp.d and add a quick test
program, a TCP server, that sets the cookie on each connection
accepted.
Reviewed by: hiren
MFC after: 1 week
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D7152
sys/sys/bitstring.h
Fix a rounding calculation that could undersize a bitstring on
32-bit platforms.
tests/sys/sys/bitstring_test.h
Add a test for bitstr_size
PR: 210260
Reported by: Mark Millard
Reviewed by: gibbs
Approved by: re (marius)
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6848
File and disk-backed I/O requests store counts of read/written disk
blocks in each AIO job so that they can be charged to the thread that
completes an AIO request via aio_return() or aio_waitcomplete(). This
change extends AIO jobs to store counts of received/sent messages and
updates socket backends to set these counts accordingly. Note that
the socket backends are careful to only charge a single messages for
each AIO request even though a single request on a blocking socket might
invoke sosend or soreceive multiple times. This is to mimic the
resource accounting of synchronous read/write.
Adjust the UNIX socketpair AIO test to verify that the message resource
usage counts update accordingly for aio_read and aio_write.
Approved by: re (hrs)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D6911
tests/sys/acl/Makefile
add perl to the required_programs for all tests in this directory
Reviewed by: ngie
Approved by: re (gjb)
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6870
Always create loopback routes on every fib, for both IPv4 and IPv6
etc/rc.d/routing
Create loopback IPv4 and IPv6 routes on every fib at boot. Revert
278302; now that all FIBs have IPv6 loopback routes, the
"route add -reject" commands won't fail.
tests/etc/rc.d/routing_test.sh
Greatly simplify static_ipv6_loopback_route_for_each_fib. It was
written under the assumption that loopback routes would be added to
a given fib by the kernel as soon as an interface is configured on
that fib. However, the logic can be much simpler now that we simply
add loopback routes to all fibs at boot. This also removes the need
to run the test as root, removes the restriction that
net.add_addr_allfibs=0, and removes the need to configure fibs in
kyua.conf.
Also, add a test case for IPv4 loopback routes
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6582
After the previous changes to fix requests on blocking sockets to complete
across multiple operations, an edge case exists where a request can be
cancelled after it has partially completed. POSIX doesn't appear to
dictate exactly how to handle this case, but in general I feel that
aio_cancel() should arrange to cancel any request it can, but that any
partially completed requests should return a partial completion rather
than ECANCELED. To that end, fix the socket AIO cancellation routine to
return a short read/write if a partially completed request is cancelled
rather than ECANCELED.
Sponsored by: Chelsio Communications
Always requeue an AIO job at the head of the socket buffer's queue if
sosend() or soreceive() returns EWOULDBLOCK on a blocking socket.
Previously, requests were only requeued if they returned EWOULDBLOCK
and completed no data. Now after a partial completion on a blocking
socket the request is queued and the remaining request is retried when
the socket is ready. This allows writes larger than the currently
available space on a blocking socket to fully complete. Reads on a
blocking socket that satifsy the low watermark can still return a short
read (same as read()).
In order to track previously completed data, the internal 'status'
field of the AIO job is used to store the amount of previously
computed data.
Non-blocking sockets continue to return short completions for both
reads and writes.
Add a test for a "large" AIO write on a blocking socket that writes
twice the socket buffer size to a UNIX domain socket.
Sponsored by: Chelsio Communications
Add a bit_count function, which efficiently counts the number of bits set in
a bitstring.
sys/sys/bitstring.h
tests/sys/sys/bitstring_test.c
share/man/man3/bitstring.3
Add bit_alloc
sys/kern/subr_unit.c
Use bit_count instead of a naive counting loop in check_unrhdr, used
when INVARIANTS are enabled. The userland test runs about 6x faster
in a generic build, or 8.5x faster when built for Nehalem, which has
the POPCNT instruction.
sys/sys/param.h
Bump __FreeBSD_version due to the addition of bit_alloc
UPDATING
Add a note about the ABI incompatibility of the bitstring(3)
changes, as suggested by lidl.
Suggested by: gibbs
Reviewed by: gibbs, ngie
MFC after: 9 days
X-MFC-With: 299090, 300538
Relnotes: yes
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6255
tests/sys/kern/Makefile
Reenable a disabled compiler warning, the need for which was
eliminated by r299090.
Reviewed by: ngie
MFC after: 4 weeks
X-MFC-With: 299090
Sponsored by: Spectra Logic Corp
after r298107
Summary of changes:
- Replace all instances of FILES/TESTS with ${PACKAGE}FILES. This ensures that
namespacing is kept with FILES appropriately, and that this shouldn't need
to be repeated if the namespace changes -- only the definition of PACKAGE
needs to be changed
- Allow PACKAGE to be overridden by callers instead of forcing it to always be
`tests`. In the event we get to the point where things can be split up
enough in the base system, it would make more sense to group the tests
with the blocks they're a part of, e.g. byacc with byacc-tests, etc
- Remove PACKAGE definitions where possible, i.e. where FILES wasn't used
previously.
- Remove unnecessary TESTSPACKAGE definitions; this has been elided into
bsd.tests.mk
- Remove unnecessary BINDIRs used previously with ${PACKAGE}FILES;
${PACKAGE}FILESDIR is now automatically defined in bsd.test.mk.
- Fix installation of files under data/ subdirectories in lib/libc/tests/hash
and lib/libc/tests/net/getaddrinfo
- Remove unnecessary .include <bsd.own.mk>s (some opportunistic cleanup)
Document the proposed changes in share/examples/tests/tests/... via examples
so it's clear that ${PACKAGES}FILES is the suggested way forward in terms of
replacing FILES. share/mk/bsd.README didn't seem like the appropriate method
of communicating that info.
MFC after: never probably
X-MFC with: r298107
PR: 209114
Relnotes: yes
Tested with: buildworld, installworld, checkworld; buildworld, packageworld
Sponsored by: EMC / Isilon Storage Division
Two new functions are provided, bit_ffs_at() and bit_ffc_at(), which allow
for efficient searching of set or cleared bits starting from any bit offset
within the bit string.
Performance is improved by operating on longs instead of bytes and using
ffsl() for searches within a long. ffsl() is a compiler builtin in both
clang and gcc for most architectures, converting what was a brute force
while loop search into a couple of instructions.
All of the bitstring(3) API continues to be contained in the header file.
Some of the functions are large enough that perhaps they should be uninlined
and moved to a library, but that is beyond the scope of this commit.
sys/sys/bitstring.h:
Convert the majority of the existing bit string implementation from
macros to inline functions.
Properly protect the implementation from inadvertant macro expansion
when included in a user's program by prefixing all private
macros/functions and local variables with '_'.
Add bit_ffs_at() and bit_ffc_at(). Implement bit_ffs() and
bit_ffc() in terms of their "at" counterparts.
Provide a kernel implementation of bit_alloc(), making the full API
usable in the kernel.
Improve code documenation.
share/man/man3/bitstring.3:
Add pre-exisiting API bit_ffc() to the synopsis.
Document new APIs.
Document the initialization state of the bit strings
allocated/declared by bit_alloc() and bit_decl().
Correct documentation for bitstr_size(). The original code comments
indicate the size is in bytes, not "elements of bitstr_t". The new
implementation follows this lead. Only hastd assumed "elements"
rather than bytes and it has been corrected.
etc/mtree/BSD.tests.dist:
tests/sys/Makefile:
tests/sys/sys/Makefile:
tests/sys/sys/bitstring.c:
Add tests for all existing and new functionality.
include/bitstring.h
Include all headers needed by sys/bitstring.h
lib/libbluetooth/bluetooth.h:
usr.sbin/bluetooth/hccontrol/le.c:
Include bitstring.h instead of sys/bitstring.h.
sbin/hastd/activemap.c:
Correct usage of bitstr_size().
sys/dev/xen/blkback/blkback.c
Use new bit_alloc.
sys/kern/subr_unit.c:
Remove hard-coded assumption that sizeof(bitstr_t) is 1. Get rid of
unrb.busy, which caches the number of bits set in unrb.map. When
INVARIANTS are disabled, nothing needs to know that information.
callapse_unr can be adapted to use bit_ffs and bit_ffc instead.
Eliminating unrb.busy saves memory, simplifies the code, and
provides a slight speedup when INVARIANTS are disabled.
sys/net/flowtable.c:
Use the new kernel implementation of bit-alloc, instead of hacking
the old libc-dependent macro.
sys/sys/param.h
Update __FreeBSD_version to indicate availability of new API
Submitted by: gibbs, asomers
Reviewed by: gibbs, ngie
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6004
Build and install the subr_unit test program originally written by phk, and
run it with the other ATF tests.
tests/sys/kern/Makefile
* Build and install the subr_unit test as a plain test
sys/kern/subr_unit.c
* Reduce the default number of repetitions from 100 to 1, and add a
command-line parser to override it.
* Don't be so noisy by default
* Fix an include problem for the test build
Reviewed by: ngie
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6038
Fix a related typo while here.
Note, this change results in the Kyuafile inclusion in the runtime
package, which needs to be fixed, however addresses the PR as far
as I can tell in my tests.
PR: 209114
Submitted by: ngie
Sponsored by: The FreeBSD Foundation
- Always munmap memory regions after mmap'ing them.
- Make sure getpagesize() returns a value greater than 0 and use a
cached value instead of always calling getpagesize(3).
- Remove intermediate variable for assigning from $TMPDIR if set in the
environment to eliminate warnings about pointer conversions with "/tmp",
and to mute an invalid buffer overflow concern from Coverity
(snprintf and tacking on a NUL terminator was alleviating that concern
before).
- Remove useless self-test of psize before it's initialized.
- Check the return values of getrlimit/setrlimit.
Cosmetic changes:
- Replace a `(void*)0` with NULL.
- Do some minor whitespace clean up.
- Remove an unnecessary cast to mmap.
- Make all munmap calls use ATF_REQUIRE_MSG instead of using the:
> if (munmap(..) == -1)
> atf_tc_fail(..)
idiom. Employ the new idiom consistently when calling munmap.
CID: 1331351, 1331382-1331386, 1331513, 1331514, 1331565, 1331583, 1331694
Differential Revision: https://reviews.freebsd.org/D6012
MFC after: 2 weeks
Reported by: Coverity
Reviewed by: markj
Sponsored by: EMC / Isilon Storage Division
- close file descriptors after use.
- Always munmap memory regions after mmap'ing them.
- Make sure getpagesize() returns a value greater than 0 and use a
cached value instead of always calling getpagesize(3).
CID: 1331374-1331377, 1331653-1331662
Differential Revision: https://reviews.freebsd.org/D6011
MFC after: 2 weeks
Reported by: Coverity
Reviewed by: cem
Sponsored by: EMC / Isilon Storage Division
The older AIO code awakened all pending AIO requests on a socket
when any data arrived. This could result in AIO daemons blocking on
an empty socket buffer. These requests could not be cancelled
which led to a deadlock during process exit. This test reproduces
this case. The newer AIO code is able to cancel the pending AIO
request correctly.
Reviewed by: ngie (-ish)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D4363
The large read test uses an empty file created via mkstemp() rather than
/dev/null as character devices are subject to two different clamping
sysctls. However, I forgot to update some of the error messages after
changing to mkstemp() that were still referring to /dev/null.
root, or the geom class can't be loaded cleanly [*]
This makes sure that scenarios that are easy to hit aren't counted
as false positives with kyua test
MFC after: 1 week
PR: 208101
Sponsored by: EMC / Isilon Storage Division
First, update the return types of aio_return() and aio_waitcomplete() to
ssize_t.
POSIX requires aio_return() to return a ssize_t so that it can represent
all return values from read() and write(). aio_waitcomplete() should use
ssize_t for the same reason.
aio_return() has used ssize_t in <aio.h> since r31620 but the manpage and
system call entry were not updated. aio_waitcomplete() has always
returned int.
Note that this does not require new system call stubs as this is
effectively only an API change in how the compiler interprets the return
value.
Second, allow aio_nbytes values up to IOSIZE_MAX instead of just INT_MAX.
aio_read/write should now honor the same length limits as normal read/write.
Third, use longs instead of ints in the aio_return() and aio_waitcomplete()
system call functions so that the 64-bit size_t in the in-kernel aiocb
isn't truncated to 32-bits before being copied out to userland or
being returned.
Finally, a simple test has been added to verify the bounds checking on the
maximum read size from a file.
improve cancellation robustness.
Introduce a new file operation, fo_aio_queue, which is responsible for
queueing and completing an asynchronous I/O request for a given file.
The AIO subystem now exports library of routines to manipulate AIO
requests as well as the ability to run a handler function in the
"default" pool of AIO daemons to service a request.
A default implementation for file types which do not include an
fo_aio_queue method queues requests to the "default" pool invoking the
fo_read or fo_write methods as before.
The AIO subsystem permits file types to install a private "cancel"
routine when a request is queued to permit safe dequeueing and cleanup
of cancelled requests.
Sockets now use their own pool of AIO daemons and service per-socket
requests in FIFO order. Socket requests will not block indefinitely
permitting timely cancellation of all requests.
Due to the now-tight coupling of the AIO subsystem with file types,
the AIO subsystem is now a standard part of all kernels. The VFS_AIO
kernel option and aio.ko module are gone.
Many file types may block indefinitely in their fo_read or fo_write
callbacks resulting in a hung AIO daemon. This can result in hung
user processes (when processes attempt to cancel all outstanding
requests during exit) or a hung system. To protect against this, AIO
requests are only permitted for known "safe" files by default. AIO
requests for all file types can be enabled by setting the new
vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have
been updated to skip operations on unsafe file types if the sysctl is
zero.
Currently, AIO requests on sockets and raw disks are considered safe
and are enabled by default. aio_mlock() is also enabled by default.
Reviewed by: cem, jilles
Discussed with: kib (earlier version)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D5289
r274560 modified kqueue_register() to only test the event condition if the
corresponding knote is not disabled. However, this check takes place before
the EV_ENABLE flag is used to clear the KN_DISABLED flag on the knote, so
enabling a previously-disabled kevent would not result in a notification for
a triggered event. This change fixes the problem by testing for EV_ENABLED
before possibly checking the event condition.
This change also updates a kqueue regression test to exercise this case.
PR: 206368
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5307
before calling dd to defeat a race when writing out to the geom_gate(4)
device
MFC after: 1 month
Reported by: Jenkins
Sponsored by: EMC / Isilon Storage Division
fact that Jenkins hardcodes image sizes to 2GB with the FreeBSD_HEAD
job
This is to stop the unnecessary failure emails because we've gone
over the 2GB limit
MFC after: 1 week
X-MFC with: r295341
Sponsored by: EMC / Isilon Storage Division
For cases where these utilities aren't installed, the tests would fail today
in a non-intuitive manner on sub-testcase #3 in each of the test scripts
MFC after: 1 week
Reviewed by: markj
Sponsored by: EMC / Isilon Storage Division
ggated(8) daemon used by the tests is the instance specifically invoked by
the tests instead of one or more daemon instances running on the system
MFC after: 1 month
Sponsored by: EMC / Isilon Storage Division
dd to defeat a race when writing out to the geom_gate(4) device
This will quell the Jenkins failure emails until I come up with a better
solution
MFC after: 1 month
Reported by: Jenkins
Sponsored by: EMC / Isilon Storage Division
NOTE_CHILD and NOTE_EXIT return something in kevent.data: the parent
pid (ppid) for NOTE_CHILD and the exit status for NOTE_EXIT.
Do not let the two events be combined, since one would overwrite
the other's data.
PR: 180385
Submitted by: David A. Bright <david_a_bright@dell.com>
Reviewed by: jhb
MFC after: 1 month
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D4900
tools/regression/geom_{concat,eli,gate,mirror,nop,raid3,shsec,stripe,uzip}
in to the FreeBSD test suite as
tests/sys/geom/class/{concat,eli,gate,mirror,nop,raid3,shsec,stripe,uzip}
The tools/regression/geom and tools/regression/geom_part testcases are being
left alone because both test sets are both currently broken.
The majority of this work was done on ^/user/ngie/more-tests2 . The differences
are as follows:
- tests/sys/geom/class/Makefile.inc is not present; it was
inlined into the class's Makefiles for explicitness.
- The testcases officially require root via kyua
- The geom_gate(4) tests don't use the pidfile changes proposed in
https://reviews.freebsd.org/D4836 .
MFC after: 1 month
Sponsored by: EMC / Isilon Storage Division
suite as tests/sys/kern/unix_passfd_test
- Convert testcases to ATF
- Fix an alignment issues
- Mark rights_creds_payload(..) as an expected failure (see PR # 181741)
Based [in part] on the following Differential Revision:
https://reviews.freebsd.org/D689
MFC after: 1 week
Submitted by: markj
Sponsored by: EMC / Isilon Storage Division
Add two new LWPINFO flags: PL_FLAG_BORN and PL_FLAG_EXITED for reporting
thread creation and destruction. Newly created threads will stop to report
PL_FLAG_BORN before returning to userland and exiting threads will stop to
report PL_FLAG_EXIT before exiting completely. Both of these events are
only enabled and reported if PT_LWP_EVENTS is enabled on a process.
- Add #ifdef TEST_SEQ_PACKET_SOURCE_ADDRESS` for untestable code
because FreeBSD doesn't have a means to map source addresses for
SEQ_PACKET AF_UNIX sockets (paraphrased). Put pathname variable
under the #ifdef to mute another unused but set variable warning
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
sane
- Push the kqueue(2) initialization down so the errno will correspond with
the failure instead of potentially being stomped on by functions called
by `PLAIN_REQUIRE_KERNEL_MODULE`
- Delete trailing whitespace
- Add spaces between braces for conditional and control blocks (for/if)
- Use err/errx instead of perror+printf+exit/printf+exit.
- Remove braces for single-line conditionals
Tested with and without -DDEBUG
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
-Wunused-but-set-variable warnings reported by gcc 4.9
Remove some trailing whitespace as well
Tested with and without -DDEBUG
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
I realize that these tests could be run before mac_bsdextended is loaded, but
it would overcomplicate things to special case handle the testcases before doing
the mac_bsdextended(4) feature check
The testcases will be split up so they can be run separately in the near future
MFC after: 3 days
Sponsored by: EMC / Isilon Storage Division
tools/regression/mac/mac_portacl into the FreeBSD test suite as
tests/sys/mac/bsdextended and tests/sys/mac/portacl, respectively
MFC after: 1 month
Sponsored by: EMC / Isilon Storage Division
testing for kernel features via the feature_present(3) libcall
The semantics are similar to the other macros in the header (skip
testcase with ATF macro; exit with appropriate exit code with the
PLAIN macro)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
Really this should not be a DPSRCS. The acct_test.c should not #include
convert.c, but just link it in as a normal SRCS.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
- Use a temporary file for convert.c to reduce likelihood of an interrupted
build resulting in bad code being written to convert.c
- Truncate the file instead of appending to it to ensure that the file being
touched will not result in duplicate declarations/definitions from
kern_acct.c if/when kern_acct.c changes.
MFC after: 1 week
tests/sys/kern/pipe
- Fix style(9) bugs
- Fix compiler warnings
- Use `nitems(x)` instead of `sizeof(x) / sizeof(*x)` pattern
The testcases will be converted over to ATF eventually, but for now will be
integrated in as plain C tests
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
The :encode_tv_random_million testcase fails the epsilon tests a few thousand
times out of one million, so expect the testcase to fail
MFC after: 1 week
Submitted by: keramida
Sponsored by: EMC / Isilon Storage Division
- Make the requirements more complete for the testcases
- Detect prerequisites so the tests won't fail (zfs.ko is loaded, zpool(1)
is available, ACL support is enabled with UFS, etc).
- Work with temporary files/directories/mountpoints that work with atf/kyua
- Limit the testcases to work on temporary filesystems to reduce tainting the
test host
MFC after: 2 weeks
Reviewed by: trasz (earlier version)
Differential Revision: https://reviews.freebsd.org/D3810
test suite as tests/sys/posixshm
Some other highlights:
- Convert the testcases over to ATF
- Don't use hardcoded paths to /tmp (which violate the ATF/kyua samdbox); use
mkstemp to generate temporary paths for non-SHM_ANON shm objects.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
netbsd-tests.test.mk (r289151)
- Eliminate explicit OBJTOP/SRCTOP setting
- Convert all ad hoc NetBSD test integration over to netbsd-tests.test.mk
- Remove unnecessary TESTSDIR setting
- Use SRCTOP where possible for clarity
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Divison
- Always set td_dbg_sc_* when P_TRACED is set on system call entry
even if the debugger is not tracing system call entries. This
ensures the fields are valid when reporting other stops that
occur at system call boundaries such as for PT_FOLLOW_FORKS or
when only tracing system call exits.
- Set TDB_SCX when reporting the stop for a new child process in
fork_return(). This causes the event to be reported as a system
call exit.
- Report a system call exit event in fork_return() for new threads in
a traced process.
- Copy td_dbg_sc_* to new threads instead of zeroing. This ensures
that td_dbg_sc_code in particular will report the system call that
created the new thread or process when it reports a system call
exit event in fork_return().
- Add new ptrace tests to verify that new child processes and threads
report system call exit events with a valid pl_syscall_code via
PT_LWPINFO.
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D3822
getppid() after a debugger process that is not the parent has attached.
Reviewed by: kib (earlier version)
Differential Revision: https://reviews.freebsd.org/D3615
- Add cdev-related tests for bad args.
- Add two simple tests cases for mapping /dev/zero that test for
MAP_ANON-like behavior.
Reviewed by: alc, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D3323
original parent. Otherwise the debugee will be set as an orphan of
the debugger.
Add tests for tracing forks via PT_FOLLOW_FORK.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D2809
cleanup routines can be executed at any point during the execution of the
body, including even before the body has done any real work. In those
cases, cleanup routines should be careful to not raise spurious errors so
as to not "override" the actual result of the test case.
This is just general good coding style but is not a problem in practice
for these specific tests. (The way I discovered the issue, though, was
due to a regression I introduced in Kyua itself while refactoring some
internals.)
MFC after: 1 week
processes and do not rely on EOF due to a close() in the debugger.
PR: 200489
Differential Revision: https://reviews.freebsd.org/D2674
Reviewed by: kib, ngie, rodrigc
traced by another process such as a debugger). The parent process does
need to check for matching orphan pids to avoid returning ECHILD if an
orphan has exited, but it should not return the exited status for the
child until after the debugger has detached from the orphan process
either explicitly or implicitly via wait().
Add two tests for for this case: one where the debugger is the direct
child (thus the parent has a non-empty children list) and one where
the debugger is not a direct child (so the only "child" of the parent
is the orphan).
Differential Revision: https://reviews.freebsd.org/D2644
Reviewed by: kib
MFC after: 2 weeks
not the old parent. Otherwise, proc_reap() will leave the zombie in place
resulting in the process' status being returned twice to its parent.
Add test cases for PT_TRACE_ME and PT_ATTACH which are fixed by
this change.
Differential Revision: https://reviews.freebsd.org/D2594
Reviewed by: kib
MFC after: 2 weeks
This is being done to fix breakage with make distribution with read-only
source trees as make distribution doesn't use make obj like building
tests/ does in all cases
Reported by: Wolfgang Zenker <wolfgang@lyxys.ka.sub.org>
Suggested by: jhb
X-MFC with: r282059
MFC after: 1 week
no longer bombs out
PLAIN_REQUIRE_KERNEL_MODULE: use printf + _exit, no err so the testcase no
longer bombs out if it prints to stderr
MFC after: 5 days
As jhb noted, the actual mmap(2) implementation is under sys/vm, not
sys/kern/, so the correct logical place is tests/sys/vm/, not
tests/sys/kern/
X-MFC with: r282076
MFC after: 6 days
for counter mode), and AES-GCM. Both of these modes have been added to
the aesni module.
Included is a set of tests to validate that the software and aesni
module calculate the correct values. These use the NIST KAT test
vectors. To run the test, you will need to install a soon to be
committed port, nist-kat that will install the vectors. Using a port
is necessary as the test vectors are around 25MB.
All the man pages were updated. I have added a new man page, crypto.7,
which includes a description of how to use each mode. All the new modes
and some other AES modes are present. It would be good for someone
else to go through and document the other modes.
A new ioctl was added to support AEAD modes which AES-GCM is one of them.
Without this ioctl, it is not possible to test AEAD modes from userland.
Add a timing safe bcmp for use to compare MACs. Previously we were using
bcmp which could leak timing info and result in the ability to forge
messages.
Add a minor optimization to the aesni module so that single segment
mbufs don't get copied and instead are updated in place. The aesni
module needs to be updated to support blocked IO so segmented mbufs
don't have to be copied.
We require that the IV be specified for all calls for both GCM and ICM.
This is to ensure proper use of these functions.
Obtained from: p4: //depot/projects/opencrypto
Relnotes: yes
Sponsored by: FreeBSD Foundation
Sponsored by: NetGate
Using PROG instead of PROGS will in cases of high -j with -DNO_ROOT cause
the PROG to show up more than once as it's handling the SCRIPTS install case
in a recursive manner, separate from the non-recursive case
After the recent batch of commits to bsd.progs.mk to fix behavior with how
variables are defaulted to, explicitly setting SRCS for a PROG is no longer
required
MFC after: 1 week
Reviewed by: asomers
Phabric: D1130
Sponsored by: EMC / Isilon Storage Division
This causes the directory traversing Kyuafile to be installed, which in turn
causes tests/sys/pjdfstest to always be run from /usr/tests/sys
Let KYUAFILE default to auto, so the file generated by suite.test.mk gets
installed instead
MFC after: 1 week
pjdfstest execution is opt-in and must be done as root due to some of the
assumptions made by the test suite and lack of error checking in the non-root
case
A description of how to execute pjdfstest with kyua is provided in
share/pjdfstest/README
Phabric: D824 (an earlier prototype patch)
MFC after: 1 month
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
fibs. Use the mbuf's or the socket's fib instead of RT_ALL_FIBS. Fixes PR
187553. Also fixes netperf's UDP_STREAM test on a nondefault fib.
sys/netinet/ip_output.c
In ip_output, lookup the source address using the mbuf's fib instead
of RT_ALL_FIBS.
sys/netinet/in_pcb.c
in in_pcbladdr, lookup the source address using the socket's fib,
because we don't seem to have the mbuf fib. They should be the same,
though.
tests/sys/net/fibs_test.sh
Clear the expected failure on udp_dontroute.
PR: 187553
CR: https://reviews.freebsd.org/D772
MFC after: 3 weeks
Sponsored by: Spectra Logic
tests/sys/kern/unix_seqpacket_test.c
* Remove a duplicate error check in mk_pair_of_sockets
* Always close sockets in the success path of ATF test cases. Don't
bother with the error paths, because those are mostly assertions
anyway. Most of these socket leaks were reported by Coverity.
All of them are harmless, because each ATF test case runs in its
own process.
* Fix the len argument to send in shutdown_send and
shutdown_send_sigpipe. The old version was using sizeof a pointer
instead of sizeof the char array. Reported by Coverity.
* Change a few ATF_CHECK to ATF_REQUIRE if the test can't reasonably
continue past a failure.
Reported by: Coverity Scan
CID: 1229995, 1229991, 1229988, 1229994, 1229989, 1229992
CID: 1229993, 1229990, 1229984, 1229967, 1230005, 1229977
CID: 1229966, 1230004, 1229976
MFC after: 1 week
Sponsored by: Spectra Logic
ifa_ifwithnet() and ifa_ifwithdstaddr() The legacy functions will call the
_fib() versions with RT_ALL_FIBS, preserving legacy behavior.
sys/net/if_var.h
sys/net/if.c
Add legacy-compatible functions as described above. Ensure legacy
behavior when RT_ALL_FIBS is passed as fibnum.
sys/netinet/in_pcb.c
sys/netinet/ip_output.c
sys/netinet/ip_options.c
sys/net/route.c
sys/net/rtsock.c
sys/netinet6/nd6.c
Call with _fib() functions if we must use a specific fib, or the
legacy functions otherwise.
tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
Improve the udp_dontroute test. The bug that this test exercises is
that ifa_ifwithnet() will return the wrong address, if multiple
interfaces have addresses on the same subnet but with different
fibs. The previous version of the test only considered one possible
failure mode: that ifa_ifwithnet_fib() might fail to find any
suitable address at all. The new version also checks whether
ifa_ifwithnet_fib() finds the correct address by checking where the
ARP request goes.
Reported by: bz, hrs
Reviewed by: hrs
MFC after: 1 week
X-MFC-with: 264905
Sponsored by: Spectra Logic
exists on another interface. The panic was introduced by change 264887, which
changed the fibnum parameter in the call to rtalloc1_fib() in
ifa_switch_loopback_route() from RT_DEFAULT_FIB to RT_ALL_FIBS. The solution
is to use the interface fib in that call. For the majority of users, that will
be equivalent to the legacy behavior.
PR: kern/189089
Reported by: neel
Reviewed by: neel
MFC after: 3 weeks
X-MFC with: 264887
Sponsored by: Spectra Logic
These two bugs are closely related. The root cause is that ifa_ifwithnet
does not consider FIBs when searching for an interface address.
sys/net/if_var.h
sys/net/if.c
Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those
functions will only return an address whose interface fib equals the
argument.
sys/net/route.c
Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib
arguments.
sys/netinet/in.c
Update in_addprefix to consider the interface fib when adding
prefixes. This will prevent it from not adding a subnet route when
one already exists on a different fib.
sys/net/rtsock.c
sys/netinet/in_pcb.c
sys/netinet/ip_output.c
sys/netinet/ip_options.c
sys/netinet6/nd6.c
Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet.
In some cases it there wasn't a clear specific fib number to use.
In others, I was unable to test those functions so I chose
RT_DEFAULT_FIB to minimize divergence from current behavior. I will
fix some of the latter changes along with PR kern/187553.
tests/sys/netinet/fibs_test.sh
tests/sys/netinet/udp_dontroute.c
tests/sys/netinet/Makefile
Revert r263738. The udp_dontroute test was right all along.
However, bugs kern/187550 and kern/187553 cancelled each other out
when it came to this test. Because of kern/187553, ifa_ifwithnet
searched the default fib instead of the requested one, but because
of kern/187550, there was an applicable subnet route on the default
fib. The new test added in r263738 doesn't work right, however. I
can verify with dtrace that ifa_ifwithnet returned the wrong address
before I applied this commit, but route(8) miraculously found the
correct interface to use anyway. I don't know how.
Clear expected failure messages for kern/187550 and kern/187552.
PR: kern/187550
PR: kern/187552
Reviewed by: melifaro
MFC after: 3 weeks
Sponsored by: Spectra Logic
sys/net/route.c
In rtinit1, use the interface fib instead of the process fib. The
latter wasn't very useful because ifconfig(8) is usually invoked
with the default process fib. Changing ifconfig(8) to use setfib(2)
would be redundant, because it already sets the interface fib.
tests/sys/netinet/fibs_test.sh
Clear the expected ATF failure
sys/net/if.c
Pass the interface fib in calls to rtrequest1_fib and rtalloc1_fib
sys/netinet/in.c
sys/net/if_var.h
Add a fibnum argument to ifa_switch_loopback_route, a subroutine of
in_scrubprefix. Pass it the interface fib.
PR: kern/187549
Reviewed by: melifaro
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
restricted to a single FIB in a multifib system.
Restricting an interface's routes to the FIB to which it is assigned (by
setting net.add_addr_allfibs=0) causes ARP updates to fail with "arpresolve:
can't allocate llinfo for x.x.x.x". This is due to the ARP update code hard
coding it's lookup for existing routing entries to FIB 0.
sys/netinet/in.c:
When dealing with RTM_ADD (add route) requests for an interface, use
the interface's assigned FIB instead of the default (FIB 0).
sys/netinet/if_ether.c:
In arpresolve(), enhance error message generated when an
lla_lookup() fails so that the interface causing the error is
visible in logs.
tests/sys/netinet/fibs_test.sh
Clear ATF expected error.
PR: kern/167947
Submitted by: Nikolay Denev <ndenev@gmail.com> (previous version)
Reviewed by: melifaro
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
tests/sys/netinet/fibs.sh
Replace fibs:udp_dontroute with fibs:src_addr_selection_by_subnet.
The original test was poorly written; it was actually testing
kern/167947 instead of the desired kern/187553. The root cause of the
bug is that ifa_ifwithnet did not have a fib argument. The new test
more directly targets that behavior.
tests/sys/netinet/udp_dontroute.c
Delete the auxilliary binary used by the old test
PR: kern/187553
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
Change {atf,plain,tap}.test.mk to be internal implementation details of
bsd.test.mk. Makefiles that build tests should now only include bsd.test.mk
and declaratively specify what they want to build, without worrying about
the internal implementation of the mk files.
The reason for this change is to permit building test programs of different
interfaces from a single directory, which is something I had a need for
while porting tests over from src/tools/regression/.
Additionally, this change makes it possible to perform some other requested
changes to bsd.test.mk in an easier manner. Coming soon.
mechanism, based on the new SB_STOP sockbuf flag. The old hack dynamically
changed the sending sockbuf's high water mark whenever adding or removing
data from the receiving sockbuf. It worked for stream sockets, but it never
worked for SOCK_SEQPACKET sockets because of their atomic nature. If the
sockbuf was partially full, it might return EMSGSIZE instead of blocking.
The new solution is based on DragonFlyBSD's fix from commit
3a6117bbe0ed6a87605c1e43e12a1438d8844380 on 2008-05-27. It adds an SB_STOP
flag to sockbufs. Whenever uipc_send surpasses the socket's size limit, it
sets SB_STOP on the sending sockbuf. sbspace() will then return 0 for that
sockbuf, causing sosend_generic and friends to block. uipc_rcvd will
likewise clear SB_STOP. There are two fringe benefits: uipc_{send,rcvd} no
longer need to call chgsbsize() on every send and receive because they don't
change the sockbuf's high water mark. Also, uipc_sense no longer needs to
acquire the UIPC linkage lock, because it's simpler to compute the
st_blksizes.
There is one drawback: since sbspace() will only ever return 0 or the
maximum, sosend_generic will allow the sockbuf to exceed its nominal maximum
size by at most one packet of size less than the max. I don't think that's
a serious problem. In fact, I'm not even positive that FreeBSD guarantees a
socket will always stay within its nominal size limit.
sys/sys/sockbuf.h
Add the SB_STOP flag and adjust sbspace()
sys/sys/unpcb.h
Delete the obsolete unp_cc and unp_mbcnt fields from struct unpcb.
sys/kern/uipc_usrreq.c
Adjust uipc_rcvd, uipc_send, and uipc_sense to use the SB_STOP
backpressure mechanism. Removing obsolete unpcb fields from
db_show_unpcb.
tests/sys/kern/unix_seqpacket_test.c
Clear expected failures from ATF.
Obtained from: DragonFly BSD
PR: kern/185812
Reviewed by: silence from freebsd-net@ and rwatson@
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
Set WARNS=5 for all files in this directory
kern/unix_seqpacket_test.c
Fix compiler warnings. Most were benign, but rcvbuf_oversized
wasn't working as intended because I forgot to set the buffer sizes.
MFC after: 2 weeks
Reported by: pho
Sponsored by: Spectra Logic Corporation
buffers drop packets". It was caused by a check for the space available
in a sockbuf, but it was checking the wrong sockbuf.
sys/sys/sockbuf.h
sys/kern/uipc_sockbuf.c
Add sbappendaddr_nospacecheck_locked(), which is just like
sbappendaddr_locked but doesn't validate the receiving socket's
space. Factor out common code into sbappendaddr_locked_internal().
We shouldn't simply make sbappendaddr_locked check the space and
then call sbappendaddr_nospacecheck_locked, because that would cause
the O(n) function m_length to be called twice.
sys/kern/uipc_usrreq.c
Use sbappendaddr_nospacecheck_locked for SOCK_SEQPACKET sockets,
because the receiving sockbuf's size limit is irrelevant.
tests/sys/kern/unix_seqpacket_test.c
Now that 185813 is fixed, pipe_128k_8k fails intermittently due to
185812. Make it fail every time by adding a usleep after starting
the writer thread and before starting the reader thread in
test_pipe. That gives the writer time to fill up its send buffer.
Also, clear the expected failure message due to 185813. It actually
said "185812", but that was a typo.
PR: kern/185813
Reviewed by: silence from freebsd-net@ and rwatson@
MFC after: 3 weeks
Sponsored by: Spectra Logic Corporation
blocking sockets. The error was not exposed as long as the kernel
suffered from PR kern/185812. Now corrected, these tests pass on
DragonFlyBSD 3.6.0.
PR: kern/185812
Sponsored by: Spectra Logic Corporation
MFC after: 2 weeks
This is to let Kyua descend into any tests that may have been installed by
ports under /usr/local/tests when running the test suite from /usr/tests.
Some ports (namely those that build Kyua) already install test programs
into /usr/local/tests. Just make sure to select the TEST option while
building them.
MFC after: 3 days
use TESTS_SUBDIRS for kern instead of SUBDIRS. I don't think it
makes a difference in this case, but TESTS_SUBDIRS is generally
correct for subdirectories that contain tests.
Sponsored by: Spectra Logic
MFC after: 5 days
X-MFC-With: r261133
were a little broken and not automatable, with unix_seqpacket_test.
It's coverage is a superset of the old tests and it uses ATF. It
includes test cases for bugs kern/185813 and kern/185812.
PR: kern/185812
PR: kern/185813
Sponsored by: Spectra Logic
MFC after: 2 weeks
Move the installation of /usr/tests/lib/Kyuafile from src/tests/lib/
to src/lib/. This is to keep the src/tests/ hierarchy unaware of the
rest of the tree, which makes things clearer in general. In particular:
1) Everything related to the construction of /usr/tests/lib/ is kept
in src/lib/. There is no need to think about different directories
and how they relate to each other. (The same applies for libexec,
usr.bin, etc. but these are not yet handled.)
2) src/tests becomes the place to keep cross-functional test programs
and nothing else, which also helps in simplifying things.
Reviewed by: freebsd-testing
Approved by: rpaulo (mentor)
Populate /usr/tests with the only test programs that currently live
in the tree (those in lib/libcrypt/tests/) and add all the build
machinery to accompany this change.
In particular:
- Add a WITHOUT_TESTS variable that users can define to request that
no tests be put in /usr/tests.
- Add a top-level Kyuafile for /usr/tests and a way to create similar
Kyuafiles in top-level subdirectories.
- Add a BSD.tests.dist file to define the directory layout of
/usr/tests.
Submitted by: Julio Merino jmmv google.com
Reviewed by: sjg
MFC after: 2 weeks
