other schedsoft*() functions since they have never been used.
Removed confused comment about not needing these functions. The
functions delay scheduling of SWIs until the next hardclock tick.
For devices that only deliver a few characters per interrupt, this
reduces the number of calls to the scheduler by a large factor (about
115 for each sio port at 115200 bps).
the 128-bit sigset_t changes by moving conditionally (rarely) executed
code to the beginning where it is always executed, and since this code
now involves 3 128-bit operations, the pessimization was relatively
large. This change speeds up lmbench's pipe latency benchmark by
3.5%.
Fixed style bugs in CURSIG().
very bloated, first with 128-bit sigset_t's, then with locking in the
SMP case, then with locking in all cases. The space bloat was probably
also time bloat, partly because the fast path through CURSIG() was
pessimized by the sigset_t changes. This change speeds up lmbench's
pipe-based latency benchmark by 4% on a Celeron. <sys/signalvar.h>
had become very polluted to support the bloat.
in favor of the new-style per-vif socket.
this does not affect the behavior of the ISI rsvpd but allows
another rsvp implementation (e.g., KOM rsvp) to take advantage
of the new style for particular sockets while using the old style
for others.
in the future, rsvp supporn should be replaced by more generic
router-alert support.
PR: kern/20984
Submitted by: Martin Karsten <Martin.Karsten@KOM.tu-darmstadt.de>
Reviewed by: kjc
is enabling as all entries are still called with Giant being held.
Maintaining compatability with NetBSD makes what should be very simple
kinda ugly.
Reviewed by: Jason Evans
filesystem lookup() routine if it unlocks parent directory. This flag should
be carefully tracked by filesystems if they want to work properly with nullfs
and other stacked filesystems.
VFS takes advantage of this flag to perform symantically correct usage
of vrele() instead of vput() if parent directory already unlocked.
If filesystem fails to track this flag then previous codepath in VFS left
unchanged.
Convert UFS code to set PDIRUNLOCK flag if necessary. Other filesystmes will
be changed after some period of testing.
Reviewed in general by: mckusick, dillon, adrian
Obtained from: NetBSD
Separate our platform independent hooks from core driver functionality
shared between platforms (FreeBSD and Linux at this time).
Add sequencer workarounds for several chip->chipset interactions.
Correct external SCB corruption problem on aic7895 based cards (3940AUW).
Lots of cleanups resulting from the port to another OS.
used by start to find the kernel. Fix this.
Also, boot would proceed immediately in the absence of a path as
argument. Check first if a kernel has already been loaded, and, if
not, fall back to load kernel&modules behavior.
Some further factorizing. I deem this code to be mostly readable by
now! :-)
Many thanks to: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
that it looks for an acceptible one. Once it finds it, it should set
the resources for the device. I say "should" because I've not written
that. Also set an ivar for the child of pccard. Minor fix to the
attach message printed, we lose the slot number, which I'll have to
restore later. Adjust the pccard ivar so that we can save the
function that corresponds to this driver so we can enable and disable
it more easily. Save a pointer to the function so we know what we're
dealing with.
There should be some way for the driver to specify which cfg it wants
to activate. For now the pccard_function_init function just picks
one, but we'll have to revisit this going forward. I'm not doing it
now because I'd need some way to activate the card many times and I'm
not sure that is desirable or even safe with some cards.
but have a network interrupt arrive and deactivate the timeout before
the callout routine runs. Check for this case in the callout routine;
it should only run if the callout is active and not on the wheel.
The boot-conf and boot code had various bugs, and some of it was big,
ugly, unwieldy, and, sometimes, plain incorrect. I'm just about
completely replaced these ugly parts with something much more manageable.
Minor changes were made to the well-factorized parts of it, to accomodate
the new code.
Of note:
* make sure boot-conf has the exact same behavior wrt boot order
as start.
* Correct both boot and boot-conf so they'll work correctly when
compiled in, as they both had some bugs, minor and major.
* Remove all the crud from loader.4th back into support.4th, for
the first time since boot-conf was first improved. Hurray!
I'm fairly satisfied with the code at this time. Time to see about those
man pages...
thread for each interrupt that comes in. If we don't, log the event and
return immediately for a hardware interrupt. For a softinterrupt, panic
instead.
Submitted by: ben
The code for suspend/resume is derived from APM device driver.
Some people suggested the original code is somewhat buggy, but I'd
like to just move it from apm.c without any major changes for the
initial version. This code should be refined later.
To use pmtimer to adjust time at resume time, add
device pmtimer
in your kernel config file, and add
hint.pmtimer.0.at="isa"
in your device.hints
Reviewed by: -current, bde
newbus for referencing device interrupt handlers.
- Move the 'struct intrec' type which describes interrupt sources into
sys/interrupt.h instead of making it just be a x86 structure.
- Don't create 'ithd' and 'intrec' typedefs, instead, just use 'struct ithd'
and 'struct intrec'
- Move the code to translate new-bus interrupt flags into an interrupt thread
priority out of the x86 nexus code and into a MI ithread_priority()
function in sys/kern/kern_intr.c.
- Remove now-uneeded x86-specific headers from sys/dev/ata/ata-all.c and
sys/pci/pci_compat.c.
re-enable interrupts when actually releasing the lock.
- Bring across some fixes to propagate_priority from the x86 code.
(It still doesn't work properly, however.)
- Use the SMTX state when putting a process that blocks on a mutex to sleep.
- Use mi_switch instead of cpu_switch so that accounting works properly as
well as other things.
- Bring across DDB protection of the spinlock timeout panic which is useful
in a multiple CPU system when 1 CPU enters the debugger holding the
sched_lock so that the other CPU doesn't panic as well resulting in all
sorts of fun things.
- Bring across various other small changes in format strings and comments
to sync up with the x86 code.
in the boot. The cleanup must be done in one of the few ways that
db_numargs() understands, so that early backtraces in ddb don't underrun
the stack. The underruns caused reboots a few years ago when there
was an unmapped page above the stack (trapping to abort the command
doesn't work early).
Cleaned up some nearby code.
filesystem may hold the lock. Otherwise unavoidable deadlock will occur.
This shouldn't have any side effects as long as we hold vfs lock.
Obtained from: NetBSD