in tcp_outout(). This is currently not strictly necessary but paves
the way to simplify the entire SYN options handling quite a bit.
Clarify comment. No change in effective behavour with this commit.
RFC1323 requires the window field in a SYN (i.e., a <SYN> or
<SYN,ACK>) segment itself never be scaled.
and simplify handling of the send/receive window scaling. No
change in effective behavour.
RFC1323 requires the window field in a SYN (i.e., a <SYN> or
<SYN,ACK>) segment itself never be scaled.
Noticed by: yar
a timer issues a shutdown and a simultaneous close on the socket
happens. This race condition is inherent in the current socket/
inpcb life cycle system but can be handled well.
Reported by: kris
Tested by: kris (on 8-core machine)
- Reorder send failed to be in correct order.
- Fixed calulation of init-ack to be right off
mbuf lengths instead of the precalculated value. This
will fix one 64 bit platform issue.
algoritm would not go through the proper initialization.
- The initialization was incorrect as well, causing problems in
sat networks with > 1sec RTT
- Get rid of magic numbers in RTT calculations.
cache size limit but this bucket row is empty. Normally we want to
recycle the oldest entry in the bucket row. If there isn't any the
TAILQ_REMOVE leads to a panic by trying to remove a non-existing
element. Fix this by just returning NULL and failing the insert.
This is not a problem as the TCP hostache is only advisory.
Submitted by: jhb
when coping out association data.
- Fixes a small bug that prevented the SCTP_UNORDERED indication
from going up to the app on a recv in the sinfo_flags field.
sysctl_handle_int is not sizeof the int type you want to export.
The type must always be an int or an unsigned int.
Remove the instances where a sizeof(variable) is passed to stop
people accidently cut and pasting these examples.
In a few places this was sysctl_handle_int was being used on 64 bit
types, which would truncate the value to be exported. In these
cases use sysctl_handle_quad to export them and change the format
to Q so that sysctl(1) can still print them.
default_vrf_id
- Missing lock/unlock of inp added as well in the v6 side.
- IFN hash table moves to sctppcbinfo since indexes are
unique across systems (including different VRFs) this makes it easier
to do ifn lookups.
concept that is NOT well thought out for a multi-homed transport
protocol. So the useless table-id entries passed around need to
be removed.
- Add a event timer for the zero copy api.
- Fix a bug in sctp_timer.c when searching for an alternate
with the largest ssthresh (the compare was wrong).
td_ru. This removes the requirement for per-process synchronization in
statclock() and mi_switch(). This was previously supported by
sched_lock which is going away. All modifications to rusage are now
done in the context of the owning thread. reads proceed without locks.
- Aggregate exiting threads rusage in thread_exit() such that the exiting
thread's rusage is not lost.
- Provide a new routine, rufetch() to fetch an aggregate of all rusage
structures from all threads in a process. This routine must be used
in any place requiring a rusage from a process prior to it's exit. The
exited process's rusage is still available via p_ru.
- Aggregate tick statistics only on demand via rufetch() or when a thread
exits. Tick statistics are kept in the thread and protected by sched_lock
until it exits.
Initial patch by: attilio
Reviewed by: attilio, bde (some objections), arch (mostly silent)
- Fixed a LOR in handling a cookie. Turns out create lock is applied.
And if we abort processing, this causes LOR. Changed to force the
timer to clean up, that way create lock is released.
is expanded, size of expansion was not taken int consideration.
- Fix so vtag hash is 1 bigger so that it modulo's out
correctly, avoids a panic when restart with right modulo happens.
- do not dereference stcb when control->do_not_ref_stcb is set
- Fix up packet logging to not often use a lock and also to
add to options.
- Fix some logging option duplication in the sctputil.h
hold a wq lock for the iterator. Panda uses a
silly recursive lock they hold through the timer.
- Add poor mans wireshark compile option..
- Allocate and start using SCTP_M_XXX for all SCTP_MALLOC() calls.
- sysctl now will get back the refcnt for viewing by onlookers.
Reviewed by: gnn
- bounded cookie-life to 1 second minimum in socket option set.
- Delayed_ack_time becomes delayed_ack per new socket api document.
- Improve port number selection, we now use low/high bounds and
no chance of a endless loop. Only one call to random per bind
as well.
- fixes so set_peer_primary pre-screens addresses to be
valid to this host.
- maxseg did not allow setting on an assoc basis. We needed
to thus track and use an association value instead of a inp value.
- Fixed ep get of HB status to report back properly.
- use settings flag to tell if assoc level hb is on off not
the timer.. since the timer may still run if unconf address
are present.
- check for crazy ENABLE/DISABLE conditions.
- set and get of pmtud (fixed path mtu) not always taking into account ovh.
- Getting PMTU info on stcb only needs to return PMTUD_ENABLED if
any net is doing PMTU discovery.
- Panic or warning fixed to not do so when a valid ip frag is
taking place.
- sndrcvinfo appearing in both inp and stcb was full size, instead
of the non-pad version. This saves about 92 bytes from each struct
by carefully converting to use the smaller version.
- one-2-one model get(maxseg) would always get ep value, never the
tcb's value.
- The delayed ack time could be under a tick, this fixes so
it bounds it to at least 1 tick for platforms whos tick
is more than a ms.
- Fragment interleave level set to wrong default value.
- Fragment interleave could not set level 0.
- Defered stream reset was broken due to a guard check and ntohl issue.
- Found two lock order reversals and fixed.
- Tighten up address checking, if the user gives an address the sa_len
had better be set properly.
- Get asoc by assoc-id would return a locked tcb when it was asked
not to if the tcb was in the restart hash.
- sysctl to dig down and get more association details
Reviewed by: gnn
in tcp_input():
o tighten the checks on allowed TCP flags to be RFC793 and
tcp-secure conform
o log check failures to syslog at LOG_DEBUG level
o rearrange the code flow to be easier to follow
o add KASSERTs to validate assumptions of the code flow
Add sysctl net.inet.tcp.syncache.rst_on_sock_fail defaulting to enable
that controls the behavior on socket creation failure for a otherwise
successful 3-way handshake. The socket creation can fail due to global
memory shortage, listen queue limits and file descriptor limits. The
sysctl allows to chose between two options to deal with this. One is
to send a reset to the other endpoint to notify it about the failure
(default). The other one is to ignore and treat the failure as a
transient error and have the other endpoint retransmit for another try.
Reviewed by: rwatson (in general)
o add the hex output of the th_flags field to the example log
line in comments
o simplify the log line length calculation and make it less
evil
o correct the test for the length panic; the line isn't on
the stack but malloc'ed
for use thoughout the tcp subsystem.
It is IPv4 and IPv6 aware creates a line in the following format:
"TCP: [1.2.3.4]:50332 to [1.2.3.4]:80 tcpflags <RST>"
A "\n" is not included at the end. The caller is supposed to add
further information after the standard tcp log header.
The function returns a NUL terminated string which the caller has
to free(s, M_TCPLOG) after use. All memory allocation is done
with M_NOWAIT and the return value may be NULL in memory shortage
situations.
Either struct in_conninfo || (struct tcphdr && (struct ip || struct
ip6_hdr) have to be supplied.
Due to ip[6].h header inclusion limitations and ordering issues the
struct ip and struct ip6_hdr parameters have to be casted and passed
as void * pointers.
tcp_log_addrs(struct in_conninfo *inc, struct tcphdr *th, void *ip4hdr,
void *ip6hdr)
Usage example:
struct ip *ip;
char *tcplog;
if (tcplog = tcp_log_addrs(NULL, th, (void *)ip, NULL)) {
log(LOG_DEBUG, "%s; %s: Connection attempt to closed port\n",
tcplog, __func__);
free(s, M_TCPLOG);
}
specified in RFC4620. A new flag for icmp6_nodeinfo was added to enable the
feature.
- Also cleaned up the code so that the semantics of the icmp6_nodeinfo
flags is clearer (i.e., defined specific macro names instead of using
hard-coded values).
Approved by: gnn (mentor)
MFC after: 1 week
- Fixed RTOinfo for bounding.
- Fixed connect() to return ECONNREFUSED when an ABORT is received.
- Added comments to direct Static Analysis not to look at some things
it does not understand (comments are /* sa_ignore XXXXX */)
- Bind when colliding was broken, missing not_found = 1 before
checking to see if the port was in use caused endless bind loop.
- Cookie life needs to be in milliseconds to conform to socket api.
- Cookie life is not supposed to change if its 0, On the assoc
level set we changed it to 0 opps.
- Two more static analysis issues identified by the cisco
tool. Null checks needed.
- An issue for sendfile(). Need to validate the correct
input argument.
- When sending failed due to a no route to host, we leaked
the mbuf chain failing to call m_freem().
- Fix #ifdef issue for getting hash block len when HAVE_SHA2 is NOT defined
Reviewed by: gnn
other than repo copied tcp_subr.c into tcp_timewait.c#1.284:
tcp_input.c#1.350 tcp_timewait() -> tcp_twcheck()
tcp_timer.c#1.92 tcp_timer_2msl_reset() -> tcp_tw_2msl_reset()
tcp_timer.c#1.92 tcp_timer_2msl_stop() -> tcp_tw_2msl_stop()
tcp_timer.c#1.92 tcp_timer_2msl_tw() -> tcp_tw_2msl_scan()
This is a mechanical move with appropriate renames and making
them static if used only locally.
The tcp_tw_2msl_scan() cleanup function is still run from the
tcp_slowtimo() in tcp_timer.c.
value in the mbuf with the result of the calculation. Previously,
if we chose to return an ICMP message, the quoted UDP checksum bytes
would be different to what was sent.
PR: 112471
Submitted by: Matthew Luckie <mluckie@cs.waikato.ac.nz>
MFC after: 3 weeks
functions from their origininal place to their own files.
TCP Reassembly from tcp_input.c -> tcp_reass.c
TCP Timewait from tcp_subr.c -> tcp_timewait.c
