Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.
Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/
Sponsored by: Netflix
Remove ancient SCCS tags from the tree, automated scripting, with two
minor fixup to keep things compiling. All the common forms in the tree
were removed with a perl script.
Sponsored by: Netflix
The difference between EXERROR and EXEXEC was that EXEXEC passed along
exitstatus and EXERROR set exitstatus to 2 in the handling code.
By changing the places that raised EXERROR to set exitstatus to 2, the
handling of EXERROR and EXEXEC becomes the same.
Similarly to how STPUTC was changed, change struct output to store the
pointer just past the end of the available space instead of the size of the
available space, so after writing a character it is only necessary to
increment a pointer and not to decrement a counter.
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
Some variables like PATH call a function when modified. Make sure to call
this also when leaving a function where such a variable was made local.
Make sure to restore local variables before shellparam, so getopts state is
not clobbered.
Command substitutions containing a single simple command and here-document
expansion are performed in a subshell environment, but may not fork. Any
modified state of the shell environment should be restored afterward.
The state that OPTIND=1 had been done was not saved and restored here.
Note that the other parts of shellparam need not be saved and restored,
since they are not modified in these situations (a fork is done before such
modifications).
This simplifies the code (e.g. allowing use of qsort(3) instead of a
hand-rolled mergesort) and should have better cache properties.
The waste of unused args arrays after resizes is approximately the same as
the savings from getting rid of the next pointers.
At the same time, remove a piece of global state and move some duplicated
code into a function.
EXP_REDIR was supposed to generate pathnames in redirection if exactly one
file matches, as permitted but not required by POSIX in interactive mode. It
is unlikely this will be implemented.
No functional change is intended.
MFC after: 1 week
POSIX does not permit to continuing a getopts loop with different
arguments. For parsing the positional parameters, we handle this case by
resetting the getopts state when the positional parameters are changed in
any way (and the getopts state is local to a function). However, in the
syntax getopts <optstring> <var> <arg...>, changes could lead to invalid
memory access.
In the syntax getopts <optstring> <var> <arg...>, store a copy of the
arguments and continue to use them until getopts is reset.
Formerly, return always returned from a function if it was called from a
function, even if there was a closer dot script. This was for compatibility
with the Bourne shell which only allowed returning from functions.
Other modern shells and POSIX return from the function or the dot script,
whichever is closest.
Git 1.8.4's rebase --continue depends on the POSIX behaviour.
Reported by: Christoph Mallon, avg
Replace the RESET blocks with regular functions and a reset() function that
calls them all.
This code generation tool is unusual and does not appear to provide much
benefit. I do not think isolating the knowledge about which modules need to
be reset is worth an almost 500-line build tool and wider scope for
variables used by the reset functions.
Also, relying on reset functions is often wrong: the cleanup should be done
in exception handlers so that no stale state remains after 'command eval'
and the like.
If a stack mark is set while the current stack block is empty, the stack
block may move later on (because of realloc()) and the stack mark needs to
be updated. This updating does not happen after popstackmark() has been
called; therefore, call setstackmark() again if the stack mark is still
being used.
For some reason, this only affects a few users. I cannot reproduce it. The
situation seems quite rare as well because an empty stack block would
usually be freed (by popstackmark()) before execution reaches a
setstackmark() call.
PR: 175922
Tested by: KT Sin
Expand here documents at the same point other redirections are expanded but
use a non-fork subshell environment (like simple command substitutions) for
compatibility. Substitition errors result in an empty here document like
before.
As a result, a fork is avoided for short (<4K) expanded here documents.
Unexpanded here documents (with quoted end marker after <<) are not affected
by this change. They already only forked when >4K.
Side effects:
* Order of expansion is slightly different.
* Slow expansions are not executed in parallel with the redirected command.
* A non-fork subshell environment is subtly different from a forked process.
If a loop contained certain commands (such as redirected compound commands),
the temporary memory for the redirection was not freed between iterations of
the loop but only after the loop.
Put a stackmark in evaltree(), freeing memory whenever a node has been
evaluated. Some other stackmarks are then redundant; remove them.
Example:
while :; do { :; } </dev/null; done
If there is a write error on stdout, a message will be printed (to stderr)
and the exit status will be changed to 2 if it would have been 0 or 1.
PR: bin/158206
This reduces code duplication and code size.
/usr/bin/printf is not affected.
Side effect: different error messages when certain builtins are passed
invalid options.
Examples:
export x=~
now expands the tilde
local y=$1
is now safe, even if $1 contains IFS characters or metacharacters.
For a word to "look like an assignment", it must start with a name followed
by an equals sign, none of which may be quoted.
The special treatment applies when the first word (potentially after
"command") is "export", "readonly" or "local". There may be quoting
characters but no expansions. If "local" is overridden with a function there
is no special treatment ("export" and "readonly" cannot be overridden with a
function).
If things like
local arr=(1 2 3)
are ever allowed in the future, they cannot call a "local" function. This
would either be a run-time error or it would call the builtin.
This matches Austin Group bug #351, planned for the next issue of POSIX.1.
PR: bin/166771
This uses vfork() for simple commands and command substitutions containing a
single simple command, invoking an external program under certain conditions
(no redirections or variable assignments, non-interactive shell, no job
control). These restrictions limit the amount of code executed in a vforked
child.
There is a large speedup (for example 35%) in microbenchmarks. The
difference in buildkernel is smaller (for example 0.5%) but still
statistically significant. See
http://lists.freebsd.org/pipermail/freebsd-hackers/2012-January/037581.html
for some numbers.
The use of vfork() can be disabled by setting a variable named
SH_DISABLE_VFORK.
In the first command of a 'for', $? should be the exit status of the last
pipeline (command substitution in the word list or command before 'for'),
not always 0.
Before this fix, only the first statement of the trap was executed if
evalskip was set. This is for example the case when:
o "-e" is set for this shell
o a trap is set on EXIT
o a function returns 1 and causes the script to abort
Reviewed by: jilles
MFC after: 2 weeks
Also, rework evalcase() to not evaluate any tree. Instead, return the
NCLISTFALLTHRU node and handle it in evaltree().
Fixed bugs:
* If a ;& list with non-zero exit status is followed by an empty ;; or final
list, the exit status of the case command should be equal to the exit
status of the ;& list, not 0.
* An empty ;& case should not reset $?.
* If no pattern is matched, POSIX says the exit status shall be 0 (even if
there are command substitutions).
* If a pattern is matched and there are no command substitutions, the first
command should see the $? from before the case command, not always 0.
This is not necessary: errors are already caught in evalbackcmd() and
forcelocal handles changes to variables.
Note that this depends on r223024.
MFC after: 4 weeks
Free expanded case text before executing commands.
Remove impossible evalskip checks (expanding an argument cannot set
evalskip anymore since $(break) and the like are properly executed in a
subshell environment).
