1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-23 11:18:54 +00:00
Commit Graph

50285 Commits

Author SHA1 Message Date
Warner Losh
ad5536b59f When we're just reading info from the driver, attempt to open the apm
device read only so we can suppot a readonly apm device.
2000-07-19 06:34:02 +00:00
Sheldon Hearn
785c4f1a3d Clean up this new manual page. This delta includes content and
whitespace changes, which should not be a problem because this
is only the second revision of the file and translators are
unlikely to have gotten started yet.

Reviewed by:	abial
2000-07-19 06:33:34 +00:00
Warner Losh
3c91d95c96 Except for the information gathering IOCTLs, require apm device be
opened for write.  This should make the apm device read only safe.
2000-07-19 06:32:00 +00:00
Hajimu UMEMOTO
05c36511b9 To define A RR to root (.) is valid in DNS. So, h_name = "" shouldn't
be treated as NULL.

PR:		bin/19816
Submitted by:	Bill Fenner <fenner@research.att.com>
Reviewed by:	Atsushi Onoe <onoe@sm.sony.co.jp>
2000-07-19 06:22:01 +00:00
Coleman Kane
48f6bffc18 Studied the tech docs for the Voodoo3 and Banshee, and hopefully fixed the
errors that plagued those cards with XFree86 4.0. They have two memory
ranges as well as an IO port range to them. Also cleaned up the three
warning messages that I got, from inb(), outb() and linuxulator. Also, I
noticed that the DRI and Glide support for the Voodoo4 and 5 has been
placed upon linux.3dfx.com, too bad they haven't released the tech docs
yet. Apparently, they are still pushing glide for all of us, so I will try
and add support once those tech docs are up.
2000-07-19 05:41:14 +00:00
Marcel Moolenaar
767ab900c6 Save any binaries we use by installworld, so that we won't use the
binaries we just installed. This allows a future upgrade target to
install a new system without intermediate reboots and also
prevents conflicts for parallel make runs where we might exec a
binary that's being installed at the same time.
2000-07-19 04:41:59 +00:00
Brian Somers
1038894eb0 Support link identification from rfc1570
Two new commands are available; ``ident'' and ``sendident''.
2000-07-19 02:10:35 +00:00
Ben Smithurst
5523e1ab86 From the PR:
1.  Correct FTP site for 4.0-stable snapshots and delete sentence
    fragment immediately following.
    [ not applicable to HEAD ]

2.  Add FDDI section to table of contents (see  below) and add
    one line of whitespace.

3.  In userland section, document csh->tcsh, more->less, and
    colorized ls.

4.  In Ethernet section, do:

        s/gigabit ethernet/Gigabit Ethernet/
        s/fast ethernet/Fast Ethernet/
        s/ethernet/Ethernet/

5.  Pull DEC DEFPA/DEFEA *FDDI* cards out of the *Ethernet* section
    and into their own second-level section.

6.  Add missing period in section header in ATM section.

7.  Tweak upgrading sectio with some new text, not sure if this is
    much better though.

8.  Add a blurb about the -stable mailing list.
    [ changed to -current list in HEAD ]

PR:		20015
Submitted by:	Bruce A. Mah <bmah@cisco.com>
2000-07-19 00:05:59 +00:00
Archie Cobbs
6e64168369 Const'ify parameters to ethers(3) routines as appropriate. 2000-07-18 22:44:52 +00:00
Archie Cobbs
d80e7aa796 Make "ifconfig" with no arguments equivalent to "ifconfig -a". 2000-07-18 22:07:31 +00:00
Jonathan Lemon
2ba03123c5 Fix a bug which would cause some knotes to get lost when two kqueues
were being used in a process at the same time.

Test case provided by:  Chris Peiffer <peifferc@CS.Stanford.EDU>
2000-07-18 21:41:47 +00:00
Cameron Grant
d98c7b9a99 make this file suitable for 4-stable as well as 5-current 2000-07-18 21:23:48 +00:00
Ben Smithurst
cf575052df * Remove description of obsolete -t option.
* Insert newline before "and" in ".Fl c and".

Approved by:	des
2000-07-18 21:05:11 +00:00
Richard Seaman Jr.
307754cbe2 PR:19945
Reviewed by:tanimura
Fix boot panic introduced by newmidi code.
2000-07-18 20:18:16 +00:00
Nick Hibma
ef36241a4a Remove an unused variable warning. 2000-07-18 20:16:36 +00:00
Jonathan Lemon
5f4afc137c FreeBSD_version bump for changed kqueue API. 2000-07-18 20:16:26 +00:00
Nick Hibma
677cec5b04 Fix the detection of parallel port Zip drives.
Submitted by:	j mckitrick <jcm@freebsd-uk.eu.org>
Reviewed by:	nsouchu
2000-07-18 20:16:16 +00:00
Justin T. Gibbs
aa6dfd9d3d o Convert to <inttypes.h> style fixed sized types to facilitate porting to
other systems.

 o Normalize copyright text.

 o Clean up probe code function interfaces by passing around a single
   structure of common arguments instead of passing "too many" args
   in each function call.

 o Add support for the AAA-131 as a SCSI adapter.

 o Add support for the AHA-4944 courtesy of "Matthew N. Dodd" <winter@jurai.net

 o Correct manual termination support for PCI cards.  The bit definitions
   for manual termination control in the SEEPROM were incorrect.

 o Add support for extracting NVRAM information from SCB 2 for BIOSen
   that use this mechanism to pass this data to OS drivers.

 o Properly set the STPWLEVEL bit in PCI config space based on the
   setting in an SEEPROM.

 o Go back to useing 32byte SCBs for all controllers.  The current
   firmware allows us to embed 12byte cdbs on all controllers in
   a 32byte SCB, and larger cdbs are rarely used, so it is a
   better use of this space to offer more SCBs (32).

 o Add support for U160 transfers.

 o Add an idle loop executed during data transfers that prefetches
   S/G segments on controllers that have a secondary DMA engine
   (aic789X).

 o Improve the performance of reselections by avoiding an extra
   one byte DMA in the case of an SCB lookup miss for the reselecting
   target.  We now keep a 16byte "untagged target" array on the card
   for dealing with untagged reselections.  If the controller has
   external SCB ram and can support 64byte SCBs, then we use an
   "untagged target/lun" array to maximize concurrency.  Without
   external SCB ram, the controller is limited to one untagged
   transaction per target, auto-request sense operations excluded.

 o Correct the setup of the STPWEN bit in SXFRCTL1.  This control
   line is tri-stated until set to one, so set it to one and then
   set it to the desired value.

 o Add tagged queuing support to our target role implementation.

 o Handle the common cases of the ignore wide residue message
   in firmware.

 o Add preliminary support for 39bit addressing.

 o Add support for assembling on big-endian machines.  Big-endian
   support is not complete in the driver.

 o Correctly remove SCBs in the waiting for selection queue when
   freezing a device queue.

 o Now that we understand more about the autoflush bug on the
   aic7890, only use the workaround on devices that need it.

 o Add a workaround for the "aic7890 hangs the system when you
   attempt to pause it" problem.  We can now pause the aic7890
   safely regardless of what instruction it is executing.
2000-07-18 20:12:14 +00:00
Justin T. Gibbs
d4e2be3050 scsi_all.c:
Clean up the comments related to the high speed
	sync rate table for SPI.

scsi_message.h:
	Bring in some SCSI3 message terminology.  All SCSI2 names
	are still preserved for backwards compatibility.
2000-07-18 19:48:58 +00:00
Justin T. Gibbs
dd5bac9d0f cam_ccb.h:
Bring back the CAM_NEGOTIATE ccb flag.  This flag indicates
	that SPI transfer negotiation should occur concurrently with the
	execution of this CCB.  The flag is not yet used by the XPT but
	is required for proper support of multi-initiator configurations
	where topology scans cannot rely on a bus reset to invalidate
	prior negotiations.

cam_xpt.c:
	Don't allow DT transmission rates to be specified for devices
	that don't have the DT feature listed in their inquiry data.
2000-07-18 19:47:14 +00:00
Jonathan Lemon
727a4ed619 Convert calls to match new kqueue API. 2000-07-18 19:38:38 +00:00
Jonathan Lemon
a8e65b915e Simplify kqueue API slightly.
Discussed on:	-arch
2000-07-18 19:31:52 +00:00
Poul-Henning Kamp
f8fc6141fb Fix the IRQ9/IRQ2 confusion.
Submitted by:	Alan Clegg <abc@bsdi.com>
2000-07-18 18:50:24 +00:00
Nik Clayton
3d48b53ecf Correct the attribution for yes(1).
PR:		docs/19401
Submitted by:	s.c.sprong@student.utwente.nl
2000-07-18 18:32:08 +00:00
David E. O'Brien
433364bb77 Remove an OBE comment. 2000-07-18 18:27:06 +00:00
David E. O'Brien
6b02e06806 KNF'ize. 2000-07-18 18:26:03 +00:00
Wilko Bulte
5d3d180a97 document serial console habits of AS2100[a] 2000-07-18 17:50:16 +00:00
Sheldon Hearn
893d2b85cd Cross-reference mount_nfs(8) and showmount(8).
PR:		20008
Reported by:	Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>
2000-07-18 17:34:23 +00:00
Sheldon Hearn
ffc717e235 Order the cross-references in the SEE ALSO section, in preparation
for PR 20008.
2000-07-18 17:31:00 +00:00
Sheldon Hearn
edeb84a1b2 Import the new truncate(1) utility.
Approved by:	jdp
2000-07-18 17:03:58 +00:00
Poul-Henning Kamp
f928d1a2f2 Add the '-l' flag to nghook which loops the received data back. 2000-07-18 16:52:27 +00:00
Matt Jacob
e2f7ff26d3 oops- need reboot.h file 2000-07-18 16:47:49 +00:00
Sheldon Hearn
571214d4fe Fix a comment which was broken in rev 1.36.
PR:		19947
Submitted by:	Tetsuya Isaki <isaki@net.ipc.hiroshima-u.ac.jp>
2000-07-18 16:43:29 +00:00
Matt Jacob
116da9daa7 Add case that David missed about setting RB_SERIAL. 2000-07-18 16:25:14 +00:00
Ben Smithurst
37cc56f575 Remove <center> tags from with <title> section.
PR:		20002
Submitted by:	James Johnson <bonk1138@msn.com>
Approved by:	patrick (from freebsd-small mailing list)
2000-07-18 15:20:55 +00:00
Ben Smithurst
dff9235e4a Define what is meant by brackets' and braces'.
Suggested by:	grog
2000-07-18 14:41:01 +00:00
Neil Blakey-Milner
42c4c88ae9 Add an empty crunch.inc with instructions that you can use it to adjust
the building of the crunched binary.

I'll add examples when I add the post-include mechanism, since the
crunch.mk environment stomps on the pre-included crunch.inc's variables
at the moment.
2000-07-18 13:49:17 +00:00
Neil Blakey-Milner
cb42083e46 Make a separate build directory in which to put all the generated
objects, to simplify working with PicoBSD.

Add the ability to put make instructions in crunch.inc to pass to the
build process.

Now explicitly make the objects in our own object tree, since we want to
build the objects with our own defines, and allow this to occur in a
common object tree for all PicoBSD builds, if required.  This is
controlled by the COMM_OBJ variable, for those who don't want this -
setting it to /usr/obj again will just pick up the objects from your
last make buildworld, as before.
2000-07-18 13:43:38 +00:00
Neil Blakey-Milner
1b9d3e55e0 Update PICOBSD-C kernel configuration to the new world order, grabbing
hints simply from GENERIC.hints.

Added a bunch of comments about usb devices, new network cards, and
IPv6.
2000-07-18 13:25:51 +00:00
Sheldon Hearn
9400b2896e Order the cross-references in the SEE ALSO section correctly. 2000-07-18 13:03:09 +00:00
Neil Blakey-Milner
ec082028ef Fix the one 'obj'-related breakage, and quieten the build. Also change
symlinks from '/sbin' to 'sbin', so following the links make sense when
not on the disk itself.
2000-07-18 12:17:54 +00:00
Neil Blakey-Milner
d295906767 First part of PicoBSD makeover, adding basic 'obj' facilities, allowing
for read-only src tree.

While I'm there:
1) Use kgzip, not kzip, since kzip certainly doesn't make bootable
kernels anymore.  loader still isn't built separately, let alone without
forth support.  This needs to be fixed.

2) Expand the mount/vnconfig examples to be the defacto way of making
sure the filesystems are mounted, unmounted, or not configured.  This
needs more work.

3) quieten the build substantially, so errors are more prominent

4) Start of '-j' ability.  Current style isn't quite in the correct
dependency format for this, but obvious mistakes (changing directories
in main shell) are fixed.

Approved by:	grog, dwhite, luigi (no objections to me doing a makeover)
2000-07-18 12:04:33 +00:00
Sheldon Hearn
888d5fad11 Fix one grammar problem which crept in from rev 1.40 to rev 1.42, and
one mdoc problem from rev 1.40 (unnecessarily populated Nm macro).
2000-07-18 12:02:15 +00:00
Poul-Henning Kamp
cdd075277a Driver for LMC1504 card: four port E1 or fractional E1.
T1 support is possible but I have no T1 hardware to test with.

The vendor can be found at: www.lanmedia.com
2000-07-18 11:34:15 +00:00
Sheldon Hearn
93238a0c40 Substitute UT_NAMESIZE for 8 when truncating long usernames.
PR:		19886
Reported by:	Gregory Bond <gnb@itga.com.au>
2000-07-18 11:32:27 +00:00
Sheldon Hearn
47e05f6091 Fix header inclusions in preparation for a fix for PR 19886.
The CVS Id tag FreeBSD was added to satisfy commit_prep.pl.
2000-07-18 11:29:13 +00:00
Poul-Henning Kamp
f21dbedd56 Driver for LMC1504 card: four port E1 or fractional E1.
T1 support is possible but I have no T1 hardware to test with.

The vendor can be found at: www.lanmedia.com
2000-07-18 11:17:25 +00:00
Nick Hibma
e9fb12d38a Add the umodem driver. 2000-07-18 10:49:45 +00:00
David E. O'Brien
628224b176 Set `boothowto' approapiately if our console is a serial one.
The "debug.boothowto" sysctl can now be used (as on the i386) to determine
if the console is a serial one.
2000-07-18 10:05:10 +00:00
David E. O'Brien
7090abf525 Allow the Fix-it functionality to detect that we are on a serial console,
and DTRT rather than start the fixit shell on a non-existant vty.

PR:	19837
Submitted by:	Doug Ambrisko <ambrisko@whistle.com>
Approved by:	JKH
2000-07-18 09:14:06 +00:00