1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-05 09:14:03 +00:00
Commit Graph

138167 Commits

Author SHA1 Message Date
Sam Leffler
bdc431a06b add support for driver-based RADIUS ACL's (committed on vendor branch as it's
been sent upstream)

Submitted by:	Chris Zimmermann
2008-03-24 21:20:35 +00:00
Sam Leffler
9170422006 resolve merge conflicts
MFC after:	3 weeks
2008-03-24 21:08:25 +00:00
Sam Leffler
6ff97d4b9c Import of hostapd 0.5.10 2008-03-24 21:06:16 +00:00
Sam Leffler
1fa9817d63 This commit was generated by cvs2svn to compensate for changes in r177576,
which included commits to RCS files with non-trunk default branches.
2008-03-24 21:06:16 +00:00
Kip Macy
e79dd20dd5 change inp_wlock_assert to inp_lock_assert 2008-03-24 20:24:04 +00:00
Sam Leffler
b685f674de enable syslog support and add -s option to the man page
MFC after:	3 weeks
2008-03-24 20:19:20 +00:00
Sam Leffler
dc0d8c3f05 This commit was generated by cvs2svn to compensate for changes in r177572,
which included commits to RCS files with non-trunk default branches.
2008-03-24 20:13:41 +00:00
Sam Leffler
be6a4d63a5 add syslog support (committed on vendor branch as it's been sent upstream)
PR:		bin/116190
2008-03-24 20:13:41 +00:00
Sam Leffler
7accac9161 update for 0.5.10 2008-03-24 19:59:12 +00:00
Sam Leffler
7e30ef1bec resolve merge conflicts
MFC after:	3 weeks
2008-03-24 19:57:51 +00:00
Sam Leffler
f2afa83e72 Import of WPA supplicant 0.5.10 2008-03-24 19:46:53 +00:00
Sam Leffler
52cae81516 This commit was generated by cvs2svn to compensate for changes in r177568,
which included commits to RCS files with non-trunk default branches.
2008-03-24 19:46:53 +00:00
Ed Maste
31a0399e57 Diff reduction to Adaptec's driver (around build 15317): catch up with a
change in debugging routines.

The fwprintf macro in the AAC_DEBUG case (mapping to printf) isn't from the
Adaptec driver.
2008-03-24 19:23:33 +00:00
Sam Leffler
3be798ba3a o add M_PROTO[678]; they'll be needed by net80211 vap code
o sort mbuf flags together and extend values to 32 bits
o write M_COPYFLAGS in terms of M_PROTOFLAGS
o move M_COPYFLAGS and M_PROTOFLAGS up to be together with flag defs

Reviewed by:	rwatson
MFC after:	3 weeks
2008-03-24 19:01:29 +00:00
Marius Strobl
5259569262 - Const'ify the bus_stream_asi and bus_type_asi arrays.
- Replace hard-coded functions names missed in bus_machdep.c rev. 1.44
  with __func__.
- Break some long lines.

MFC after:	1 month
2008-03-24 17:57:01 +00:00
Marius Strobl
23a6342bb7 - Take advantage of bus_dmamap_load_mbuf_sg(9).
- Take advantage of m_collapse(9).
- Sync with other NIC drivers and prepend a TX mbuf if the first attempt
  to load it fails with an error other than EFBIG and stop trying instead
  of freeing it and keeping on trying to enqueue more mbufs. Also ensure
  the driver queue isn't empty before trying to enqueue mbufs in order to
  reduce locking operations.
- In xl_ifmedia_upd() add a missing XL_UNLOCK(). [1]
- Const'ify the xl_devs array.
- Remove an outdated comment.

PR:		113406 [1]
MFC after:	1 month
2008-03-24 17:49:06 +00:00
Marius Strobl
ebc284cc83 - Const'ify the dc_devs array.
- Correct the maxsize parameter when creating the mbufs busdma tag to
  reflect the actual requirement of dc(4).
- Move the KASSERT in dc_newbuf() to the right spot.
- Also convert the TX side to take advantage of bus_dmamap_load_mbuf_sg(9).
- Move the comment regarding dc_start_locked() to the right spot.

MFC after:	2 weeks
2008-03-24 17:38:24 +00:00
Marius Strobl
bd3d9826d7 Split the registers into two halves in preparation for SBus support.
Obtained from:	NetBSD (loosely)
MFC after:	2 weeks
2008-03-24 17:23:53 +00:00
Ed Maste
04f4d586b7 Diff reduction to Adaptec driver build 15317 (refactoring and code shuffling):
- Resource allocation in aac_alloc (moved from from aac_init)
- Interrupt setup in aac_setup_intr (from aac_attach)
- Container probing in aac_get_container_info (from aac_startup and
  aac_handle_aif)
- Firmware status check moved to aac_check_firmware from aac_init
2008-03-24 16:38:47 +00:00
Bjoern A. Zeeb
44c92dbb34 Fix a bug that when getting/dumping the soft lifetime we reported
the hard lifetime instead.

MFC after:	3 days
2008-03-24 15:01:20 +00:00
Bjoern A. Zeeb
fdcc0789fb Import change from KAME, rev. 1.362 kame/kame/sys/netkey/key.c
In case of "new SA", we must check the hard lifetime of the old SA
to find out if it is not permanent and we can delete it.

Submitted by:	sakane via gnn
MFC after:	3 days
2008-03-24 14:55:09 +00:00
Antoine Brodin
94dd320367 Don't remove usr/include/fs/nwfs and usr/include/netncp, as they are always
recreated during installworld (they are in BSD.include.dist).

Reported by:	Pawel Worach
Approved by:	rwatson (mentor)
X-MFC:		with revision 1.13
2008-03-24 14:46:40 +00:00
Christian S.J. Peron
bde4024026 Bump the FreeBSD version for zerocopy bpf buffers and changes to the
bpf(4) monitoring ABI/structures.
2008-03-24 14:30:01 +00:00
Christian S.J. Peron
582908b314 Catch netstat up for the new bpf stats structures. Print 64 bit values
properly.

Sponsored by:	Seccuris Inc
MFC after:	4 months
2008-03-24 13:50:39 +00:00
Christian S.J. Peron
4d621040ff Introduce support for zero-copy BPF buffering, which reduces the
overhead of packet capture by allowing a user process to directly "loan"
buffer memory to the kernel rather than using read(2) to explicitly copy
data from kernel address space.

The user process will issue new BPF ioctls to set the shared memory
buffer mode and provide pointers to buffers and their size. The kernel
then wires and maps the pages into kernel address space using sf_buf(9),
which on supporting architectures will use the direct map region. The
current "buffered" access mode remains the default, and support for
zero-copy buffers must, for the time being, be explicitly enabled using
a sysctl for the kernel to accept requests to use it.

The kernel and user process synchronize use of the buffers with atomic
operations, avoiding the need for system calls under load; the user
process may use select()/poll()/kqueue() to manage blocking while
waiting for network data if the user process is able to consume data
faster than the kernel generates it. Patchs to libpcap are available
to allow libpcap applications to transparently take advantage of this
support. Detailed information on the new API may be found in bpf(4),
including specific atomic operations and memory barriers required to
synchronize buffer use safely.

These changes modify the base BPF implementation to (roughly) abstrac
the current buffer model, allowing the new shared memory model to be
added, and add new monitoring statistics for netstat to print. The
implementation, with the exception of some monitoring hanges that break
the netstat monitoring ABI for BPF, will be MFC'd.

Zerocopy bpf buffers are still considered experimental are disabled
by default. To experiment with this new facility, adjust the
net.bpf.zerocopy_enable sysctl variable to 1.

Changes to libpcap will be made available as a patch for the time being,
and further refinements to the implementation are expected.

Sponsored by:		Seccuris Inc.
In collaboration with:	rwatson
Tested by:		pwood, gallatin
MFC after:		4 months [1]

[1] Certain portions will probably not be MFCed, specifically things
    that can break the monitoring ABI.
2008-03-24 13:49:17 +00:00
Ruslan Ermilov
2f93f6470b Fix splitting into words of the .for expression to allow for
spaces in values.  Without this change, the following valid
call broke due to parsing of .MAKEFLAGS in bsd.symver.mk:

cd /usr/src/lib/libc && make -n DEBUG_FLAGS="-DFOO -DBAR"

Spotted by:	Igor Sysoev
Submitted by:	Maxim Dounin, ru
MFC after:	1 week
2008-03-24 12:33:28 +00:00
Ruslan Ermilov
8c9dc249d1 Fix bugs in the previous revision. 2008-03-24 09:47:44 +00:00
Kip Macy
cf7a8ff3b7 remove unneccessary tcbinfo lock acquisitions - set tp to null affter calling enter_timewait as we no longer own the inpcb 2008-03-24 05:21:10 +00:00
Jeff Roberson
0ee6cecc9d - Greatly simplify vget() by removing the guarantee that any new
references to a vnode with VI_OWEINACT set will force the vinactive()
   call.  The kernel makes no guarantees about which reference was the
   last to close a file or when the actual inactive processing will
   happen.  The previous code was designed to preserve existing semantics
   in the face of shared locks, however, this was unnecessary.

Discussed with:	mckusick
2008-03-24 04:22:58 +00:00
Jeff Roberson
804e60d4cf - Don't acquire the vnode interlock in _vn_lock() unless no lock type
is requested.  Handle this case specially before the while loop.
 - Use the held vnode lock to check for VI_DOOMED.  The vnode lock and
   interlock must both be held to set VI_DOOMED so either one held, even
   shared, is sufficient to check it.

No objection by:	kib
2008-03-24 04:17:35 +00:00
Jeff Roberson
97735db712 - Remove an old comment; vnodes have been working without Giant for
years now.
 - Clarify the locking required for VI_DOOMED in preparation for
   simplifications to vget() and vn_lock().
2008-03-24 04:11:40 +00:00
Kip Macy
8815ab518a Label inp as unused in the non-INVARIANTS case 2008-03-24 00:29:01 +00:00
Peter Wemm
f001eabf3a First pass at (possibly futile) microoptimizing of cpu_switch. Results
are mixed.  Some pure context switch microbenchmarks show up to 29%
improvement.  Pipe based context switch microbenchmarks show up to 7%
improvement.  Real world tests are far less impressive as they are
dominated more by actual work than switch overheads, but depending on
the machine in question, workload, kernel options, phase of moon, etc, a
few percent gain might be seen.

Summary of changes:
- don't reload MSR_[FG]SBASE registers when context switching between
  non-threaded userland apps.  These typically cost 120 clock cycles each
  on an AMD cpu (less on Barcelona/Phenom).  Intel cores are probably no
  faster on this.
- The above change only helps unthreaded userland apps that tend to use
  the same value for gsbase.  Threaded apps will get no benefit from this.
- reorder things like accessing the pcb to be in memory order, to give
  prefetching a better chance of working.  Operations are now in increasing
  memory address order, rather than reverse or random.
- Push some lesser used code out of the main code paths.  Hopefully
  allowing better code density in cache lines.  This is probably futile.
- (part 2 of previous item) Reorder code so that branches have a more
  realistic static branch prediction hint.  Both Intel and AMD cpus
  default to predicting branches to lower memory addresses as being
  taken, and to higher memory addresses as not being taken.  This is
  overridden by the limited dynamic branch prediction subsystem.  A trip
  through userland might overflow this.
- Futule attempt at spreading the use of the results of previous operations
  in new operations.  Hopefully this will allow the cpus to execute in
  parallel better.
- stop wasting 16 bytes at the top of kernel stack, below the PCB.
- Never load the userland fs/gsbase registers for kthreads, but preserve
  curpcb->pcb_[fg]sbase as caches for the cpu. (Thanks Jeff!)

Microbenchmarking this code seems to be really sensitive to things like
scheduling luck, timing, cache behavior, tlb behavior, kernel options,
other random code changes, etc.

While it doesn't help heavy userland workloads much, it does help high
context switch loads a little, and should help those that involve
switching via kthreads a bit more.

A special thanks to Kris for the testing and reality checks, and Jeff for
tormenting me into doing this. :)

This is still work-in-progress.
2008-03-23 23:09:06 +00:00
Alan Cox
58680920e9 Correct an error in pmap_mincore() when applied to a 2MB page mapping:
Use PG_PS_FRAME, not PG_FRAME, to obtain the physical address of the
2MB physical page from the PDE.
2008-03-23 23:04:09 +00:00
Peter Wemm
22c0c6e9d3 Export TDP_KTHREAD to asm files. 2008-03-23 22:46:37 +00:00
Peter Wemm
6c73bb3557 Move pcb_flags to make trivially better use of cache lines. 2008-03-23 22:45:51 +00:00
Peter Wemm
3d60169ef4 Protect the setting of the fsbase/gsbase MSR registers and the
pcb_[fg]sbase values with a critical section, like the rest of the kernel.
2008-03-23 22:44:56 +00:00
Kip Macy
3d5853271e Insulate inpcb consumers outside the stack from the lock type and offset within the pcb by adding accessor functions.
Reviewed by: rwatson
MFC after: 3 weeks
2008-03-23 22:34:16 +00:00
Alan Cox
702006ff76 To date, we have assumed that the TLB will only set the PG_M bit in a
PTE if that PTE has the PG_RW bit set.  However, this assumption does
not hold on recent processors from Intel.  For example, consider a PTE
that has the PG_RW bit set but the PG_M bit clear.  Suppose this PTE
is cached in the TLB and later the PG_RW bit is cleared in the PTE,
but the corresponding TLB entry is not (yet) invalidated.
Historically, upon a write access using this (stale) TLB entry, the
TLB would observe that the PG_RW bit had been cleared and initiate a
page fault, aborting the setting of the PG_M bit in the PTE.  Now,
however, P4- and Core2-family processors will set the PG_M bit before
observing that the PG_RW bit is clear and initiating a page fault.  In
other words, the write does not occur but the PG_M bit is still set.

The real impact of this difference is not that great.  Specifically,
we should no longer assert that any PTE with the PG_M bit set must
also have the PG_RW bit set, and we should ignore the state of the
PG_M bit unless the PG_RW bit is set.  However, these changes enable
me to remove a work-around from pmap_promote_pde(), the superpage
promotion procedure.

(Note: The AMD processors that we have tested, including the latest,
the Phenom, still exhibit the historical behavior.)

Acknowledgments: After I observed the problem, Stephan (ups) was
instrumental in characterizing the exact behavior of Intel's recent
TLBs.

Tested by: Peter Holm
2008-03-23 20:38:01 +00:00
Konstantin Belousov
1be222e9df Yield the cpu in the kernel while iterating the list of the
vnodes belonging to the mountpoint. Also, yield when in the
softdep_process_worklist() even when we are not going to sleep due to
buffer drain.

It is believed that the ULE fixed the problem [1], but the yielding
seems to be needed at least for the 4BSD case.

Discussed:	on stable@, with bde
Reviewed by:	tegge, jeff [1]
MFC after:	2 weeks
2008-03-23 13:45:24 +00:00
Colin Percival
c58b62eff4 When updating the install list for files which have had local changes
merged with upgrade changes, don't try to compute the SHA256 hash of
files which don't exist.

Reported by:	Jaakko Heinonen
MFC after:	1 week
2008-03-23 13:41:54 +00:00
Jeff Roberson
fbb275f59d - Restore kse.h in this directory so other tools don't find it by mistake.
- Restore the ability to debug kse coredumps in 8.0.

Suggested by:	marcel
2008-03-23 09:38:11 +00:00
Konstantin Belousov
3f7905d29c Prevent the overflow in the calculation of the next page directory.
The overflow causes the wraparound with consequent corruption of the
(almost) whole address space mapping.

As Alan noted, pmap_copy() does not require the wrap-around checks
because it cannot be applied to the kernel's pmap. The checks there are
included for consistency.

Reported and tested by:	kris (i386/pmap.c:pmap_remove() part)
Reviewed by:	alc
MFC after:	1 week
2008-03-23 07:07:27 +00:00
Pyun YongHyeon
2000cf6c0b MSI handling on some RealTek chips are broken so disable it by
default.

Reported by:	Giulio Ferro ( auryn AT zirakzigil DOT org )
Tested by:	Giulio Ferro ( auryn AT zirakzigil DOT org )
2008-03-23 05:35:18 +00:00
Pyun YongHyeon
03ca7ae8a9 For MSI capable hardwares, enable MSI enable bit in RL_CFG2
register.  If MSI was disabled by hw.re.msi_disable tunable
expliclty clear the MSI enable bit.
2008-03-23 05:31:35 +00:00
Pyun YongHyeon
ce6283934e Some RealTek chips are known to be buggy on DAC handling, so
disable DAC by default.
2008-03-23 05:13:45 +00:00
Pyun YongHyeon
ccf34c81f8 VLAN hardware tag information should be set for all desciptors of a
multi-descriptor transmission attempt. Datasheet said nothing about
this requirements. This should fix a long-standing VLAN hardware
tagging issues with re(4).

Reported by:	Giulio Ferro ( auryn AT zirakzigil DOT org )
Tested by:	Giulio Ferro ( auryn AT zirakzigil DOT org )
2008-03-23 05:06:16 +00:00
Pyun YongHyeon
70acaecfd0 Always honor configured VLAN/checksum offload capabilities.
Previously re(4) used to blindly enable VLAN hardware tag stripping
and Rx checksum offload regardless of enabled optional features of
interface.
2008-03-23 04:59:13 +00:00
Bruce A. Mah
72b218d366 New release notes: KSE removed, cmx(4), uslcom(4), sf(4) update,
re(4) update, vr(4) update, TCP options padding fix, ata(4) spindown,
hptrr(4) 1.2, mmap(2)/ZFS fix, chflags(1) -v/-f, cp(1) -a, find(1)
primaries to match GNU find, split(1) -n, tar(1) -Z, bzip2 1.0.5.

Modified release notes:  CVS post-1.11.12 snapshot from 10 March 2008.
2008-03-23 04:12:07 +00:00
Craig Rodrigues
67361fdf2d Remove comment about "-r" flag from readlabel. "-r" is a no-op.
The is comment is left over from the old disklabel command.

Reviewed by:	phk
2008-03-23 03:01:10 +00:00