This makes statically linked binaries with ifuncs operational.
Reported and tested by: mjg
Reviewed by: emaste, markj
Sponsored by: The FreeBSD Foundation
Approved by: re (rgrimes)
Differential revision: https://reviews.freebsd.org/D17363
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using mis-identified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
On most architectures crt objects are compiled in a multiple-step process
so that sed can be run on the generated assembly. As the final step,
the C compiler generates an object file from the modified assembly output.
Currently this last step uses $CC with only $ACFLAGS. However, for other
uses in the tree, $ACFLAGS is meant to include assembly-specific compiler
flags that are in addition to $CFLAGS (see default .S.o rules
bsd.suffixes.mk). In particular, external toolchains may require
additional flags to select a non-default target which will be present
in CFLAGS but not ACFLAGS. To support this while still mitigating the
issue with CFLAGS described in r234502, include a modified CFLAGS that
excludes "-g" when assembling the modified assembly files.
Note that normally an assembler ($AS) is used to assemble .s flags to
object files (see bsd.suffixes.mk). However, llvm-based toolchains do
not currently have a stand-alone assembler.
Reviewed by: imp
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D10085
The requirement is for a GCC-compatible compiler and not necessarily
GCC itself. However, we currently expect any compiler used for building
the whole of FreeBSD to be GCC-compatible and many things will break if
not; there's no longer a need to have an explicit test for this in csu.
Sponsored by: The FreeBSD Foundation
FILES is not used when LIBRARIES_ONLY is set, which is used to build and
install the lib32 sysroot. All of the csu files do quality as "libraries"
for this case so just undefine LIBRARIES_ONLY.
This is still better than the previous realinstall handling as it does
not hook into META_MODE properly.
Sponsored by: EMC / Isilon Storage Division
This partially reverts r270170 for lib/csu/i386 while retaining the
change for using bsd.lib.mk.
These FILES groups could go into lib/csu/Makefile.inc but I've kept them
in the Makefiles for clarity.
Sponsored by: EMC / Isilon Storage Division
Off by default, build behaves normally.
WITH_META_MODE we get auto objdir creation, the ability to
start build from anywhere in the tree.
Still need to add real targets under targets/ to build packages.
Differential Revision: D2796
Reviewed by: brooks imp
1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.
We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.
Reported by: kib
This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.
Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]
Mark known build failures as NO_PIE for now.
The only known runtime failure was rtld.
[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by: Shawn Webb <lattera@gmail.com>
Discussed between: des@ and Shawn Webb [2]
Preloaded library could have changed the environment, and
unconditional assingment to the environ undoes the customization.
The binaries needs to be recompiled to get the fix.
Move the common code to set up environ and __progname into the helper.
Note that ia64 possibly not fixed, due to it still using old csu.
Reported and tested by: John Hein <jhein@symmetricom.com>
Reviewed by: kan, scf
Approved by: secteam (simon)
MFC after: 2 weeks
way: first they are compiled to assembly, then some sed'ing is done on
the assembly, and lastly the assembly is compiled to an object file.
This last step is done using ${CC}, and not ${AS}, because when the
compiler is clang, it outputs directives that are too advanced for our
old gas. So we use clang's integrated assembler instead. (When the
compiler is gcc, it just calls gas, and nothing is different, except one
extra fork.)
However, in the .s to .o rules in lib/csu/$ARCH/Makefile, I still passed
CFLAGS to the compiler, instead of ACFLAGS, which are specifically for
compiling .s files.
In case you are using '-g' for debug info anywhere in your CFLAGS, it
causes the .s files to already contain debug information in the assembly
itself. In the next step, the .s files are also compiled using '-g',
and if the compiler is clang, it complains: "error: input can't have
.file dwarf directives when -g is used to generate dwarf debug info for
assembly code".
Fix this by using ${ACFLAGS} for compiling the .s files instead.
Reported by: jasone
MFC after: 1 week
call preinit, init and fini arrays methods from crt1 for static binaries.
Mark new crt1 with FreeBSD-specific ELF note.
Move some common crt1 code into new MI file ignore_init.c, to reduce
duplication. Also, conservatively adjust nearby sources for style.
Reviewed by: kan
Tested by: andrew (arm), flo (sparc64)
MFC after: 3 weeks
generated from lib/csu/common/crtbrand.c (which ultimately ends up in
executables and shared libraries, via crt1.o, gcrt1.o or Scrt1.o).
For all arches except sparc, gcc emits the section directive for the
abitag struct in crtbrand.c with a PROGBITS type. However, newer
versions of binutils (after 2.16.90) require the section to be of NOTE
type, to guarantee that the .note.ABI-tag section correctly ends up in
the first page of the final executable.
Unfortunately, there is no clean way to tell gcc to use another section
type, so crtbrand.c (or the C files that include it) must be compiled in
multiple steps:
- Compile the .c file to a .s file.
- Edit the .s file to change the 'progbits' type to 'note', for the section
directive that defines the .note.ABI-tag section.
- Compile the .s file to an object file.
These steps are done in the invididual Makefiles for each applicable arch.
Reviewed by: kib
Scrt1.o instead of crt1.o, since the later is built as non-PIC.
Separate i386-elf crt1.c into the pure assembler part and C code,
supplying all data extracted by assembler stub as explicit parameters [1].
Hide and localize _start1 symbol used as an interface between asm and
C code.
In collaboration with: kan
Inspired by: PR i386/127387 [1]
Prodded and tested by: rdivacky [1]
MFC after: 3 weeks
For gcc' __builtin_frame_address() to work, all call frames need to save
frame pointer. In particular, this is important for the upper frame that
should terminate the chain.
No objections from: jhb
PR: amd64/126543
MFC after: 1 week
in 1993 in rev.1.5 of the i386 a.out version (csu/i386/crt0.c).
Profiling uses a magic label "eprol" to delimit the start of the part
of the text section covered by profiling. This label must be placed
before the call to main() to get main() properly profiled. It was
placed there in rev.1.1 of crt0.c. Rev.1.5 imported the initial
implementation of shared libraries in FreeBSD and misplaced the label.
Fortunately, the misplaced label was misspelled and the old label
wasn't removed, so the new label had no effect. Unfortunately, when
profiling was implemented for the ELF in 1998 in rev.1.2 of
csu/i386-elf/crt1.c, only the incorrectly placed label was copied
(after fixing its name). The bug was then copied to all other arches.
The label seems to be still misplaced in NetBSD for most arches. It
is in common.c for most arches so it is even further from being inside
the function that calls main().
I think "eprol" is short for "end of prologue", but it must be placed
before the end of the prologue so that it covers main(). crt0.c has
it before the calls atexit(_mcleanup) and monstartup(...), but it
cannot affect these calls so I moved it after the call to monstartup().
It now also covers the call to _init() but not the newer call to
_init_tls(). Profiling of _init() seems to be harmless, and the call
to _init_tls() seems to be misplaced.
Reviewed by: jdp (long ago, for a slightly different i386 version)
since it has been MFC'ed. See the log message for the previous commit
for more details. The alignment bug in gcc-3 has not been fixed, but
it is not very serious and the previous commit just moved it (as intended).
Approved by: re (murray)
-fomit-frame-pointer is not used). This is mostly moot for -current
because gcc-3 does the alignment (slightly incorrectly) in main().
This patch is intended for easy MFC'ing and should be backed out in
-current soon since it causes compiler warnings and better fixes are
possible in -current. The best fix is to do nothing here and wait for
gcc to do stack alignment right. gcc-3 aligns the stack in main(), but
does it too late for main()'s local variables and too late for anything
called before main(). A misaligned stack is now more than an efficiency
problem, since some SSE instructions in some or all (hardware)
implementations trap on misaligned operands even if alignment checking
is not enabled.
PR: 41528:
Submitted by: NIIMI Satoshi <sa2c@sa2c.net> (original version)
MFC after: 3 days
Assembler macros are tidied up and made as similar as sanely possible.
The macros are translated into C (__inline static) functions for lint.
Declaration orders are made the same.
Declarations are all ISOfied and tidied up.
Comment contents have gratuitous diffs removed.
The net result is a bunch of crt1.c's that are 90% the same.
It may be possible to now encapsulate the differences in one
MD header, and have only one MI crt1.c file (although the macros
to do this may be ugly).
Helpful comments by: obrien, bde
Alpha tested by: des
i386-elf tested by: markm
Get rid of the INTERNALSTATICLIB knob and just use plain INTERNALLIB.
INTERNALLIB now means to build static library only and don't install
anything. Added a NOINSTALLLIB knob for libpam/modules. To not
build any library at all, just do not set LIB.
except to generate spurious warnings about a system header <sys/param.h>
having some inline functions (the bswap family). This backs out the main
part of rev.1.5 (which was the only part left). The problem fixed by
rev.1.5 of the Makefile went away in rev.1.5 of ../common/crtbegin.c
when the references to do_ctors() and do_dtors() in the latter were moved
from inline asm to C code.
This leaves the problem that implementation details cause warnings.
Discussed with: jdp
Also, make an internal _getprogname() that is used only inside
libc. For libc, getprogname(3) is a weak symbol in case a
function of the same name is defined in userland.
when using the egcs and gcc-devel ports, along with GCC built from stock
public FSF sources. With out this change, FreeBSD will be removed from
the list of systems GCC 3.0 must be evaluated on before release. With
the effort some of us put into getting FreeBSD on this list, we should
not turn this effort into a waste, else we might not be worth fighting
for in the future. (note that Alpha and IA-64 versions of crt{i,n}.S
are needed)
* Switch from our own crt{begin,in} to those created from GCC's crtstuff.c.
This will allow us to switch to DWARF2 exceptions in the future, along with
staying in sync with any future GCC requirements.
* Break out our ELF branding bits into a seperate file. Currently this
is now included by our crt1.c files (since this functionality was part of
our native crtbegin.c). Later crtbrand.o will be merged in the creation
of crti.o.
various architectures. Now all the work is done in crtbegin.c.
It doesn't contain any assembly language code, so it should work
fine on all architectures. (I have tested it on the i386 and the
alpha.) The old assembly language files crt[in].S are now empty
shells that generate no code or data. They should not be removed
any time soon, because the various versions of gcc in src and ports
expect them to exist.
Next I will move crtbegin.c into a new common machine-independent
directory, and adjust the i386-elf Makefile to use that version.
After that I will adjust the alpha Makefile to use the common
version too.
Requested by: obrien
