Maxim Konovalov
0525ad4ccf
o OpenBSD 4.5 added.
2009-04-30 17:47:52 +00:00
Maxim Konovalov
3eef459ffc
o Correct ng_hole(4) control messages names.
...
PR: docs/134100
Submitted by: Eugene Mychlo
MFC after: 1 week
2009-04-30 10:01:13 +00:00
Maxim Konovalov
b5a7b21c4e
o NetBSD 5.0 added.
2009-04-30 07:48:49 +00:00
Ruslan Ermilov
f3320e5fd8
Added (pre|post)(start|stop) jail hooks. These can be used to run
...
arbitrary commands (outside the jail) associated with said events,
e.g. to bring up/down CARP interfaces representing services run in
jails.
Reviewed by: simon
2009-04-28 09:45:32 +00:00
Edwin Groothuis
9dfee9ccd2
MFC of tzdata2009g:
...
Egypt will have DST till the end of September the coming years.
2009-04-28 08:20:32 +00:00
Ed Schouten
ccfd3aab30
Turn MAXPTSDEVS into a sysctl tunable.
...
This allows users to increase the maximum amount of pseudo-terminals
without changing any source code. Users must increase UT_LINESIZE before
attempting to increase kern.pts_maxdev.
2009-04-25 10:05:55 +00:00
Maxim Konovalov
ffe65ca91d
o Correct geli(8) command line.
...
PR: docs/133961
Submitted by: Aldis Berjoza
MFC after: 1 week
2009-04-24 06:44:58 +00:00
Christian Brueffer
2a72feb42b
Correct the information about when the respective functionality first
...
appeared in FreeBSD.
PR: 133785
Submitted by: Ulrich Spoerlein <uqs@spoerlein.net>
MFC after: 3 days
2009-04-23 08:37:56 +00:00
Rafal Jaworowski
9e8894a010
Provide manual page for the tsec(4) device driver.
...
Obtained from: Semihalf
2009-04-22 15:25:00 +00:00
Edward Tomasz Napierala
1f6ac2bd3d
Turns out rtm_use does still exist, just under different name - for
...
a long time (since 6.1) it was #defined as rtm_fmask. Update manual
page. While here, sync some constants with what's in route.h.
2009-04-22 12:52:12 +00:00
Kevin Lo
4bdf8b4ddf
Back out my previous change
2009-04-21 07:22:12 +00:00
Antoine Brodin
9d9ab10e8b
vlan(4) no longer depends on miibus(4).
...
Reviewed by: jhb@
MFC after: 1 month
2009-04-20 15:01:45 +00:00
Edward Tomasz Napierala
2ba2ee8d07
Adjust route(4) manual page to remove rtm_use field, which was removed
...
from the route.h some time ago.
Reviewed by: rwatson
2009-04-20 13:53:40 +00:00
Robert Watson
78fc60e401
Garbage collect man page reference to IFF_NEEDSGIANT.
2009-04-18 20:09:43 +00:00
Warner Losh
39ce911c1e
This turns out to be wrong...
2009-04-18 04:21:04 +00:00
Kevin Lo
5d8c02c23f
Change Taiwan, Province of China to Taiwan, Republic of China
2009-04-17 08:01:18 +00:00
Robert Watson
71807e2542
Remove man pages ar(4), ray(4), and sr(4) following removal of these
...
non-MPSAFE device drivers.
2009-04-16 11:09:59 +00:00
Edwin Groothuis
9a338160ba
MFV of tzdata2009f
...
Correct DST information for Pakistan for 2009.
2009-04-14 08:15:39 +00:00
Edwin Groothuis
49ba1deb12
MFV of tzdata2009e
...
- Jordan went into DST in the last Thursday in March instead of the
last Friday in March.
- Palestine has extended the DST time with one week before and one
month after.
MFC after: 1 week
2009-04-13 09:17:40 +00:00
Gabor Pali
2983091e25
- Add myself to the ports committers' graph
...
Approved by: gabor (mentor)
2009-04-12 21:06:11 +00:00
Tim Kientzle
7970a63721
Any tar program should work here; the explicit
...
reference to bsdtar is misleading.
2009-04-11 22:39:38 +00:00
Edward Tomasz Napierala
d0d7c39c72
Remove 'IMPLEMENTATION NOTES' section from acl(9); it was just a copy/paste
...
from <sys/acl.h> and it would get out-of-date pretty soon.
2009-04-11 10:37:04 +00:00
Warner Losh
a2910806e5
Updates based on my testing of the cards.
2009-04-10 15:01:48 +00:00
Robert Watson
cd5213b94b
Remove VOP_LEASE(9) man page, as we no longer have a VOP_LEASE() in the
...
kernel.
2009-04-10 10:59:48 +00:00
Ed Schouten
11c39fb4a3
Add C++ operators to operator(7) manual page.
...
Submitted by: Christoph Mallon <christoph.mallon@gmx.de>
2009-04-08 20:20:19 +00:00
Xin LI
358b0d9003
Add the following media types as supported by bce(4):
...
- 1000BaseSX
- 2500BaseSX
While I'm there, correct 1000BaseTX as more standard 1000BaseT.
MFC after: 3 days
2009-04-07 22:23:48 +00:00
Christian Brueffer
2469ad2e30
Remove superfluous dot.
2009-04-07 20:13:48 +00:00
Christian Brueffer
b502ecac39
Reword the HARDWARE section so uath(4) can actually be recognized in
...
the hardware notes on the website. While here sort SEE ALSO.
2009-04-07 20:11:02 +00:00
Christian Brueffer
5794d21c2c
Mdoc cleanup.
...
Prompted by: man2hwnotes.pl
MFC after: 3 days
2009-04-07 20:00:20 +00:00
Christian Brueffer
e7d6c4e74e
Move an "end list" macro to the right place.
...
Found by: man2hwnotes.pl
MFC after: 3 days
2009-04-07 19:53:36 +00:00
Weongyo Jeong
fdda6436a7
do not cause a line break in the AUTHORS section.
...
Pointed by: yongari
2009-04-07 04:12:34 +00:00
Dag-Erling Smørgrav
38fb1637a3
Fix ISO8859-15 links for nb_NO / no_NO.
...
Submitted by: ru
MFC after: 1 week
2009-04-06 14:12:22 +00:00
Weongyo Jeong
54a6481fd1
connect uath.4 to the build.
2009-04-06 12:47:09 +00:00
Ed Schouten
439fd52c3c
Regenerate src.conf.5.
2009-04-05 22:15:35 +00:00
Ed Schouten
d2a0bb0803
Remove if_ppp(4) and if_sl(4).
...
Not only did these two drivers depend on IFF_NEEDSGIANT, they were
broken 7 months ago during the MPSAFE TTY import. if_ppp(4) has been
replaced by ppp(8). There is no replacement for if_sl(4).
If we see regressions in for example the ports tree, we should just use
__FreeBSD_version 800045 to check whether if_ppp(4) and if_sl(4) are
present. Version 800045 is used to denote the import of MPSAFE TTY.
Discussed with: rwatson, but also rwatson's IFF_NEEDSGIANT emails on the
lists.
2009-04-05 22:08:18 +00:00
Weongyo Jeong
dc60165b73
Add uath(4) wireless USB driver for Atheros AR5005UG and AR5005UX
...
chipsets.
Reviewed by: sam
2009-04-04 11:23:00 +00:00
Nathan Whitehorn
1c96bdd146
Add support for 64-bit PowerPC CPUs operating in the 64-bit bridge mode
...
provided, for example, on the PowerPC 970 (G5), as well as on related CPUs
like the POWER3 and POWER4.
This also adds support for various built-in hardware found on Apple G5
hardware (e.g. the IBM CPC925 northbridge).
Reviewed by: grehan
2009-04-04 00:22:44 +00:00
Tom Rhodes
cd5e62f992
Catch up with recent locking changes.
...
PR: 132546
Submitted by: pluknet <pluknet@gmail.com>
Reviewed by: alc
2009-04-03 23:52:47 +00:00
Tom Rhodes
5a2d42de0c
Remove the fla.4 manual page, the driver was nuked
...
over four years ago.
Noticed by: rene
Prodded by: brueffer
2009-04-01 09:22:25 +00:00
Tom Rhodes
7ba7e04135
On second thought, remove the comma too.
2009-04-01 08:08:25 +00:00
Tom Rhodes
9c0f9817ff
Remove KSE bits, cross reference libthr.3.
...
PR: 132392
Submitted by: Niclas Zeising <niclas.zeising@gmail.com> (original version)
2009-04-01 07:13:21 +00:00
Edward Tomasz Napierala
6283502e20
Remove pseudocode from VOP_* manual pages. It was out of date anyway.
...
Reviewed by: scottl
Approved by: rwatson (mentor)
2009-03-30 20:56:37 +00:00
John Baldwin
497435aafd
Add a simple manage for the refcount(9) API.
...
Requested by: rwatson
2009-03-30 18:01:12 +00:00
Christian Brueffer
f885252242
Fix typo.
2009-03-29 21:08:48 +00:00
Sam Leffler
50959dc8d4
remove bogus nwid use; that's a compat shim for netbsd
2009-03-29 18:14:45 +00:00
Sam Leffler
c01c776a52
fix wired-wireless failover example and remove incorrect
...
comment about WPA not working
2009-03-29 18:05:04 +00:00
Warner Losh
2766fd061c
Update to include Toshiba LANCT00A card being supported, as well as a
...
caution that while the Mitsubishi M8895 has a DP83902, its ASIC is
undocumented and doens't work with either the NE2000 or the WD80x3
drivers.
2009-03-28 20:59:25 +00:00
Ruslan Ermilov
0c9e0226e3
Add explicit test so that non-existence of /usr/games/fortune
...
doesn't affect command exit status.
2009-03-27 21:13:14 +00:00
Weongyo Jeong
cb1d58e298
bump date.
...
Pointed by: yongari
2009-03-26 06:12:04 +00:00
Weongyo Jeong
298ff442c0
adds malo(4).
2009-03-26 04:17:35 +00:00
Weongyo Jeong
bf5dca34b6
bwi(4) and mwl(4) doesn't exist at CURRENT.
2009-03-26 04:16:40 +00:00
Weongyo Jeong
e575f1bfc8
The malo(4) device driver first appeared in FreeBSD 7.1 not 8.0.
...
Reported by: John <lists_at_reiteration.net>
MFC after: 3 days
2009-03-26 02:59:10 +00:00
Warner Losh
6594f4b3d1
Add recently added cards.
2009-03-25 22:14:46 +00:00
Sam Leffler
284699a790
update; mostly to eliminate ambiguity about what hardware is supported
2009-03-25 21:20:15 +00:00
Edwin Groothuis
a7c248498e
MFV of tzdata2009d:
...
- Morocco will observe DST from 2009-06-01 00:00 to 2009-08-21 00:00
- Tunisia will not observe DST this year.
- Syria will start DST on 2009-03-27 00:00 this year
- the Province of San Luis will go to utc-04:00
MFC after: 1 week
2009-03-24 10:50:30 +00:00
Robert Noland
ba0b16188e
Correct the documentation to reflect the fact that BUS_DMA_NOCACHE is a
...
flag to bus_dmamem_alloc() rather than bus_dmamap_load();
Discussed with: kib
MFC after: 3 days
2009-03-22 21:00:58 +00:00
Andrew Thompson
2b78d30630
Remove the uscanner(4) driver, this follows the removal of the kernel scanner
...
driver in Linux 2.6. uscanner was just a simple wrapper around a fifo and
contained no logic, the default interface is now libusb (supported by sane).
Reviewed by: HPS
2009-03-19 20:33:26 +00:00
Warner Losh
e3ed9db21c
Reference exca.
2009-03-18 20:03:33 +00:00
Fabien Thomas
a15a45ac9d
Add information about me as a new committer to the src tree
...
Approved by: jkoshy (mentor)
2009-03-17 14:53:42 +00:00
Edwin Groothuis
8845bab06b
MFV of tzdata2009c
...
- Cuba has DST again.
MFC after: 1 week
2009-03-17 10:51:31 +00:00
Sam Leffler
cdd7d4bcfe
(finally) document -n
2009-03-16 15:54:21 +00:00
Robert Watson
3cb73e3d8b
Teach the loopback interface about checksum generation and validation
...
avoidance:
- Enable setting the RXCSUM and TXCSUM flags for loopback interfaces;
set both by default.
- When RXCSUM is set, flag packets sent over the loopback interface as
having checked and valid IP, UDP, TCP checksums so that higher
protocol layers won't check them.
- Always clear CSUM_{IP,UDP_TCP} checksum required flags on transmit,
as they will have gotten there as a result of TXCSUM being set.
This is done only for packets explicitly sent over the loopback, not
simulated loopback via if_simloop() due to !SIMPLEX interfaces, etc.
Note that enabling TXCSUM but not RXCSUM will lead to unhappiness, as
checksums won't be generated but will be validated.
Kris reports that this leads to significant performance improvements
in loopback benchmarking with TCP and UDP for throughput:
RXCSUM RXCSUM+TXCSUM
TCP 15% 37%
UDP 10% 74%
Update man page.
Reviewed by: sam
Tested by: kris
MFC after: 1 week
2009-03-15 20:17:44 +00:00
Roman Divacky
300d03a832
Switch over to gnu99 compilation on default for userland.
...
Tested by: make universe
Tested by: ports exp build (done by pav)
Reviewed by: ru
Reviewed by: silence on arch
Approved by: ed (mentor)
2009-03-14 17:55:16 +00:00
Robert Watson
49dd3b8df9
Don't suggest mounting procfs in diskless configurations.
...
MFC after: 3 days
2009-03-13 23:42:34 +00:00
Rui Paulo
569c3c7dcd
Rename the k8temp(4) man page to amdtemp(4) and update its contents for
...
the new families.
MFC after: 2 weeks
2009-03-13 16:42:24 +00:00
Ruslan Ermilov
1cbe9ccf46
Switch to using official English short country names.
2009-03-13 14:35:58 +00:00
Brooks Davis
3e5f41cf03
Add support for setting the debug flags on wlan interfaces after the are
...
created using wlandebug_<ifn> variables.
2009-03-13 07:12:25 +00:00
Pyun YongHyeon
fdd3e2aa19
Xref altq.4 and bump .Dd
2009-03-12 01:27:15 +00:00
Pyun YongHyeon
15b42c1197
Add txp(4) to the list of drivers supporting ALTQ.
2009-03-12 01:21:48 +00:00
Andrew Thompson
f9ec06aba7
Remove these files, they refer to module bundles that do not exist anymore.
2009-03-10 15:54:37 +00:00
Bruce M Simpson
d10910e6ce
Merge IGMPv3 and Source-Specific Multicast (SSM) to the FreeBSD
...
IPv4 stack.
Diffs are minimized against p4.
PCS has been used for some protocol verification, more widespread
testing of recorded sources in Group-and-Source queries is needed.
sizeof(struct igmpstat) has changed.
__FreeBSD_version is bumped to 800070.
2009-03-09 17:53:05 +00:00
Bruce M Simpson
fe9ee5e879
Add igmp(4) man page, do not connect to build yet.
2009-03-09 16:51:40 +00:00
Xin LI
c79ba5b058
A system with plenty of memory would not require so much swap for generic
...
usage.
Discussed with: dillon
2009-03-09 05:41:04 +00:00
Joe Marcus Clarke
74999b4cf2
Document the new default implementation of VOP_VPTOCNP(9).
...
Approved by: kib
2009-03-08 19:07:44 +00:00
Andrew Thompson
dc4b1d1662
Add Mobile Action MA-620 Infrared Adapter.
...
PR: usb/125072
Submitted by: Alexander Logvinov
MFC after: 1 week
2009-03-04 03:47:57 +00:00
Bruce M Simpson
2fb1aecaed
Add cross-reference to sourcefilter(3).
2009-03-04 02:00:34 +00:00
Bruce M Simpson
108ad5bd51
Add source-specific multicast (SSM) option documentation.
2009-03-04 02:00:14 +00:00
Christian Brueffer
004da5adcb
Xref glxsb(4).
...
MFC after: 3 days
2009-03-03 07:58:01 +00:00
Jamie Gritton
f86bce5ed0
Extend the "vfsopt" mount options for more general use. Make struct
...
vfsopt and the vfs_buildopts function public, and add some new fields
to struct vfsopt (pos and seen), and new functions vfs_getopt_pos and
vfs_opterror.
Further extend the interface to allow reading options from the kernel
in addition to sending them to the kernel, with vfs_setopt and related
functions.
While this allows the "name=value" option interface to be used for more
than just FS mounts (planned use is for jails), it retains the current
"vfsopt" name and <sys/mount.h> requirement.
Approved by: bz (mentor)
2009-03-02 23:26:30 +00:00
Rong-En Fan
624aa124ee
- Remove kH (kp_kll) from screen. It has the identical key sequence as
...
@7 (kp_end). As ncurses has the limitation that it returns the first
matched key symbol, you can not use END in ncurses based program under
screen (like ports/misc/mc).
We did similar changes to xterm entry last year for exactly the same reason.
PR: 132199
Submitted by: Timur I. Bakeyev <timur at FreeBSD.org>
MFC after: 2 month
2009-03-01 07:08:46 +00:00
Andrew Thompson
50517c3075
MFp4 //depot/projects/usb@157855
...
Document short_frames_ok.
Submitted by: Hans Petter Selasky
2009-02-24 03:40:09 +00:00
Andrew Thompson
bf41796c4e
Build fixups for the new USB stack.
2009-02-23 18:36:54 +00:00
Nathan Whitehorn
5b4975b180
Explicitly disable generation of Altivec instructions in the kernel on PowerPC,
...
and add support to allow users to set their CPUTYPE in make.conf.
2009-02-22 18:45:30 +00:00
Edward Tomasz Napierala
cbc1fff1f6
Mention disk_gone() in disk(9).
...
Approved by: rwatson (mentor)
2009-02-22 13:38:16 +00:00
Edward Tomasz Napierala
56b341a285
Fix a typo and add manpage links to geom(4).
...
Approved by: rwatson (mentor)
2009-02-22 13:37:22 +00:00
Rui Paulo
152507eaa0
Fix typo.
2009-02-22 12:40:58 +00:00
Beech Rintoul
4e8204fbc1
- Add glarkin and mva to mentor section
2009-02-20 02:48:58 +00:00
Max Brazhnikov
acdbf34efa
Add myself.
2009-02-19 16:15:30 +00:00
Mike Makonnen
72735687b3
o grammar fix
...
o remove mention of libkse
2009-02-19 13:45:25 +00:00
Maxim Konovalov
217dc6b01c
o Fix year in the previous commit.
...
Submitted by: Munehiro Matsuda
2009-02-18 19:05:27 +00:00
Andriy Gapon
4d8f3ef49b
add myself to committers tree
...
Approved by: rpaulo (mentor)
2009-02-18 17:36:44 +00:00
Maxim Konovalov
99f41b91c3
o DragonFly 2.2.0 added.
2009-02-18 10:02:32 +00:00
Mike Makonnen
553bf6a453
Rename the rc.conf(5) knob if_up_delay to defaultroute_delay to better
...
reflect its purpose.
2009-02-17 11:55:50 +00:00
Beat Gaetzi
c7869e8d4e
- Add myself to the list of ports committers.
...
Approved by: miwi (mentor)
2009-02-16 18:51:34 +00:00
Nick Hibma
c5b659eed0
Elaborate some on the workings of the stub.
...
Collapse up the list of supported devices.
2009-02-13 20:09:11 +00:00
Alexander Motin
be0d073bd7
Fix spelling a bit.
2009-02-12 13:04:13 +00:00
Pyun YongHyeon
d66a21e9f2
Document loader tunable hw.re.msi_disable.
...
Bump .Dd
2009-02-09 05:09:52 +00:00
John Baldwin
3d33d453a0
Note that the slave address passed to smb(4) commands must be left-justified
...
(LSB is 0). The iic(4) manpage probably needs similar language to describe
the format it expects.
2009-02-06 15:09:31 +00:00
Kevin Lo
83d78e07da
Add the Buffalo WLI-U2-SG54HG
2009-02-06 15:03:17 +00:00
Attilio Rao
05fa71ba43
Remove the assertive KA_HELD and KA_UNHELD as long as they are dangerous,
...
and not really helpful.
2009-02-05 15:09:04 +00:00