no cleanwindows handler so just remove trying to trigger it from _start
and the AP trampoline code as that leads to a crash there. This should
be okay as leaking data from the OFW via the CPU registers on start of
the kernel should be no real concern.
- Make the comments of _start and the AP trampoline code regarding the
initializations they perform match each other and reality.
- Make the comments of the AP trampoline code regarding iTLB accesses
refer to the right macro.
OpenBSD and OpenSolaris do instead of fiddling with the MMUs ourselves.
Unlike direct access the firmware methods don't automatically use the
next free (?) TLB slot, instead the slot to be used has to be specified.
We allocate the TLB slots for the kernel top-down as OpenSolaris suggests
that the firmware will always allocate the ones for its own use bottom-up.
Besides being simpler, according to OpenBSD using the firmware methods is
required to allow booting on Sun Fire E10K with multi-systemboard domains.
of Sun Fire V1280 doesn't round up the size itself but instead lets
claiming of non page-sized amounts of memory fail.
- Change parameters and variables related to the TLB slots to unsigned
which is more appropriate.
- Search the whole OFW device tree instead of only the children of the
root nexus device for the BSP as starting with UltraSPARC IV the 'cpu'
nodes hang off of from 'cmp' (chip multi-threading processor) or 'core'
or combinations thereof. Also in large UltraSPARC III based machines
the 'cpu' nodes hang off of 'ssm' (scalable shared memory) nodes which
group snooping-coherency domains together instead of directly from the
nexus.
- Add support for UltraSPARC IV and IV+ BSPs. Due to the fact that these
are multi-core each CPU has two Fireplane config registers and thus the
module/target ID has to be determined differently so the one specific
to a certain core is used. Similarly, starting with UltraSPARC IV the
individual cores use a different property in the OFW device tree to
indicate the CPU/core ID as it no longer is in coincidence with the
shared slot/socket ID.
While at it additionally distinguish between CPUs with Fireplane and
JBus interconnects as these also use slightly different sizes for the
JBus/agent/module/target IDs.
- Check the return value of init_heap(). This requires moving it after
cons_probe() so we can panic when appropriate. This should be fine as
the PowerPC OFW loader uses that order for quite some time now.
- Update bpb structs with reserved fields.
- In direntry struct join deName with deExtension. Although a
fix was attempted in the past, these fields were being overflowed,
Now this is consistent with the spec, and we can now share the
WinChksum code with NetBSD.
Submitted by: Pedro F. Giffuni <giffunip tutopia com>
Mostly obtained from: NetBSD
Reviewed by: bde
MFC after: 2 weeks
kvm_nlist skips lookup for entries that have n_type != N_UNDF.
N_UNDF happens to be zero, so n_type typically has a correct
value by accident, but not always.
Note: jhb has a patch that replaces kvm_nlist use with direct
gdb parsing.
MFC after: 5 days
X-MFC-Note: unless jhb commits kvm_nlist => kgdb_parse change
pending blocks are scheduled for removal, goes to retry the (re)allocation,
clear the bp pointer. It might happen that meantime free space is really
exhausted and we are entering nospace: label without bread()ing buffer,
causing stale bp value to be brelse()d again.
Tested by: pho
(Producing a scenario to reliably reproduce the
race appeared to be much harder then fixing the bug)
MFC after: 1 week
this in the Sibyte PCI hostbridge driver instead.
The nexus driver sees resource allocation requests for memory and irq
resources only. These are legitimate resources on all MIPS platforms.
Suggested by: imp
- Kcachegrind (calltree) support with assembly/source
code mapping and call count estimator (-F).
- Top mode for calltree and callgraph plugin (-T).
MFC after: 1 month
It is belived that that pass s not needed anymore.
Specifically it is not required now for the reasons that were given
in the removed comment.
Discussed with: jhb
MFC after: 4 weeks
o Incorporate review comments:
- Properly reference and lock the map
- Take into account that the VM map can change inbetween requests
- Add the fileid and fsid attributes
Credits: kib@
Reviewed by: kib@
Some current systems dynamically load SSDT(s) when _PDC/_OSC method
of Processor is evaluated. Other devices in ACPI namespace may access
objects defined in the dynamic SSDT. Drivers for such devices might
have to have a rather high priority, because of other dependencies.
Good example is acpi_ec driver for EC.
Thus we attach to Processors as early as possible to load the SSDTs
before any other drivers may try to evaluate control methods.
It also seems to be a natural order for a processor in a device
hierarchy.
On the other hand, some child devices on acpi cpu bus need to access
other system resources like PCI configuration space of chipset devices,
so they need to be probed and attached rather late.
For this reason we probe and attach the cpu bus at
SI_SUB_CONFIGURE:SI_ORDER_MIDDLE SYSINIT level.
In the future this could be done more elegantly via multipass.
Please note that acpi drivers that might access ACPI namespace from
device_identify will do that before _PDC/_OSC of Processors are evaluated.
Legacy cpu driver is not affected by this change.
PR: kern/142561 (in part)
Reviewed by: jhb
Silence from: acpi@
MFC after: 5 weeks
This makes libusb porting a bit easier.
There shouldn't by any negative change in behaviour after this commit.
Remove redundant headers.
Reviewed by: hps@
however, are possitive and seem to be reverse sorted in the list.
Conform device numbering and bring a result that is consistent with the
libusb 0.1 API. It is now possible to distinguish a device based on its
(bus, dev) numbers.
There shouldn't be any negative change in behavior after this commit.
Tested with: scanimage (sane)
http://freebsd.czest.pl/~wkoszek/qemu/l.c
Reviewed by: hps@
inodes by cutting back on the number of inodes per cylinder group if
necessary to stay under the limit. For a default (16K block) file
system, this limit begins to take effect for file systems above 32Tb.
This fix is in addition to -r203763 which corrected a problem in the
kernel that treated large inode numbers as negative rather than unsigned.
For a default (16K block) file system, this bug began to show up at a
file system size above about 16Tb.
Reported by: Scott Burns, John Kilburg, Bruce Evans
Followup by: Jeff Roberson
PR: 133980
MFC after: 2 weeks
inode numbers as negative rather than unsigned. For a default
(16K block) file system, this bug began to show up at a file system
size above about 16Tb.
To fully handle this problem, newfs must be updated to ensure that
it will never create a filesystem with more than 2^32 inodes. That
patch will be forthcoming soon.
Reported by: Scott Burns, John Kilburg, Bruce Evans
Followup by: Jeff Roberson
PR: 133980
MFC after: 2 weeks
Traditionally, grdc would obtain time through time(3) which in turn gets
only the second part of clock (CLOCK_SECOND), and sleep for 1 second after
each screen refresh.
This approach would have two problems. First, we are not guaranteed to
be waken up at the beginning of a whole second, which will typically
exhibit as a "lag" on second number. Second, because we sleep for whole
second, and the refresh process would take some time, the error would
accumulate from time to time, making the lag variable.
Make grdc(6) to use time(3) to get time only at the beginning, and sample
time in CLOCK_REALTIME_FAST granularity after refreshing, and use the
nanosecond part to caculate how much time we want to sleep.
PR: bin/120813
MFC after: 1 month
the 'debugging' section of any HEAD kernel and enable for the mainstream
ones, excluding the embedded architectures.
It may, of course, enabled on a case-by-case basis.
Sponsored by: Sandvine Incorporated
Requested by: emaste
Discussed with: kib
have code that detects this and makes two
transmit descriptors. However its possible
that the algorithm detects when the second
page is not used (when the data aligns perfectly
to the bottom of the page). This caused a 0
len descriptor to be added which locks up the
rge device. Skip such things with a continue.
JC provided this patch... Thanks JC :-)
Obtained from: JC (c.jayachandran@gmail.com)
