1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-20 11:11:24 +00:00
Commit Graph

16 Commits

Author SHA1 Message Date
Thomas Moestl
18100346d1 Miscellaneous fixes:
- Fix compilation without GEM_DEBUG.
- Do not #define GEM_DEBUG by default; it adds overhead (due to bzero()ing
  RX space) and is not needed any more, since the driver is quite stable
  now.
- Fix watchdog timeouts when failing to load TX packets.
- Do not forcibly limit the number of descriptors used for a packet to
  GEM_NTXSEGS, by passing this number to bus_dma_tag_create(). There is
  no requirement for a limit any lower than the total number of
  available descriptors, and the present limit caused network problems
  due to mbuf chains requiring more descriptors.
  GEM_NTXSEGS is still used to estimate the interrupt window size, for
  which we just need an estimate.

Approved by:	re (rwatson)
2003-05-15 16:57:55 +00:00
Warner Losh
a163d034fa Back out M_* changes, per decision of the TRB.
Approved by: trb
2003-02-19 05:47:46 +00:00
Thomas Moestl
b2d59f4234 bus_dmamap_sync() overhaul:
- Remove NetBSD-style or-ed together BUS_DMASYNC operations, in some
  cases relaxing the (intended) syncing operation a bit.
- Stop pretending that that we can sync part of a dmamap: replace the
  GEM_CDTXSYNC and GEM_CDRXSYNC macros with GEM_CDSYNC to sync the
  complete control map, and combine syncs wherever possible to avoid
  the overhead.
- Sync all maps before unloading them.
- Remove a few syncs which should be unnecessary.
2003-01-21 17:17:01 +00:00
Alfred Perlstein
44956c9863 Remove M_TRYWAIT/M_WAITOK/M_WAIT. Callers should use 0.
Merge M_NOWAIT/M_DONTWAIT into a single flag M_NOWAIT.
2003-01-21 08:56:16 +00:00
Thomas Moestl
cbbdf2367e Add detach, shutdown, suspend and resume methods. The latter two are
not really tested, but are derived from the original NetBSD version.
2003-01-08 20:12:45 +00:00
Thomas Moestl
305f2c0632 - Convert to use bus_dmamap_load_mbuf().
- remove DPRINTF(), there is a CTR*() for any of them, and KTR is
  far more useful to debug this driver.
- some cleanups; remove some unused code and definitions.
2003-01-06 22:09:01 +00:00
Maxime Henrion
6c9ecf447f Catch up with sam's changes to network interfaces. 2002-11-15 14:36:33 +00:00
Sam Leffler
673d91916d network interface driver changes:
o don't strip the Ethernet header from inbound packets; pass packets
  up the stack intact (required significant changes to some drivers)
o reference common definitions in net/ethernet.h (e.g. ETHER_ALIGN)
o track ether_ifattach/ether_ifdetach API changes
o track bpf changes (use BPF_TAP and BPF_MTAP)
o track vlan changes (ifnet capabilities, revised processing scheme, etc.)
o use if_input to pass packets "up"
o call ether_ioctl for default handling of ioctls

Reviewed by:	many
Approved by:	re
2002-11-14 23:54:55 +00:00
Thomas Moestl
08e0fdeb39 Call bpf_mtap() on outgoing packets. 2002-10-26 12:32:07 +00:00
Jake Burkholder
11e3f06011 Fix warning. 2002-07-24 01:09:38 +00:00
Benno Rice
336cca9e5f Incorporate changes made to the NetBSD version of this driver.
- Remove some obsolete code (NetBSD gem.c r1.12)
- Clean up how the local MAC address is programmed (NetBSD gem.c r1.13)
- Make the driver work on PowerMacs with gigabit interfaces
  (NetBSD gem.c r1.14 and r1.15, gemreg.h r1.3 and r1.4, gemvar.h r1.6 and 1.7)
- Suppress RX_MAC interrutps regarding the FRAME_COUNT register.
  (NetBSD gem.c r1.16 and r1.17)
- Fix receiver lockups. (NetBSD gem.c r1.18, gemvar.h r1.8)
- Distinguish between Apple and Sun variants (NetBSD if_gem_pci.c r1.9)

Reviewed by:	tmm
Obtained from:	NetBSD
2002-07-10 10:24:23 +00:00
Thomas Moestl
9bb711b95d Fully reset a gem on some error conditions; otherwise it would hang in
about 1 of 10 cases.

Proposed and tested by:	phk
2002-05-24 12:47:41 +00:00
Mike Barcroft
a30d4b3270 Move the new byte order function prototypes from <sys/param.h> to
<sys/endian.h>.  This puts us in line with NetBSD and OpenBSD.
2002-04-26 22:48:23 +00:00
Thomas Moestl
0d80b9bd88 In some cases, RX descriptors that are signalled to have been completed
by the hardware are still marked as owned. Handle this by installing a
timeout handler to collect this descriptor to avoid having received
packets remain unhandled until the next one arrives.
2002-03-23 19:43:15 +00:00
Alfred Perlstein
e51a25f850 Remove __P. 2002-03-20 02:08:01 +00:00
Thomas Moestl
42c1b001f7 Add a driver for the Sun GEM (Gigabit) and ERI (100 Mb/s) PCI ethernet
adaptors, ported from NetBSD.
2002-02-27 17:41:06 +00:00