1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-28 11:57:28 +00:00
Commit Graph

115 Commits

Author SHA1 Message Date
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Poul-Henning Kamp
9dcbe2404a Convert DEVFS hooks in (most) drivers to make_dev().
Diskslice/label code not yet handled.

Vinum, i4b, alpha, pc98 not dealt with (left to respective Maintainers)

Add the correct hook for devfs to kern_conf.c

The net result of this excercise is that a lot less files depends on DEVFS,
and devtoname() gets more sensible output in many cases.

A few drivers had minor additional cleanups performed relating to cdevsw
registration.

A few drivers don't register a cdevsw{} anymore, but only use make_dev().
1999-08-23 20:59:21 +00:00
Matthew N. Dodd
15317dd875 Alter the behavior of sys/kern/subr_bus.c:device_print_child()
- device_print_child() either lets the BUS_PRINT_CHILD
	  method produce the entire device announcement message or
	  it prints "foo0: not found\n"

Alter sys/kern/subr_bus.c:bus_generic_print_child() to take on
the previous behavior of device_print_child() (printing the
"foo0: <FooDevice 1.1>" bit of the announce message.)

Provide bus_print_child_header() and bus_print_child_footer()
to actually print the output for bus_generic_print_child().
These functions should be used whenever possible (unless you can
just use bus_generic_print_child())

The BUS_PRINT_CHILD method now returns int instead of void.

Modify everything else that defines or uses a BUS_PRINT_CHILD
method to comply with the above changes.

	- Devices are 'on' a bus, not 'at' it.
	- If a custom BUS_PRINT_CHILD method does the same thing
	  as bus_generic_print_child(), use bus_generic_print_child()
	- Use device_get_nameunit() instead of both
	  device_get_name() and device_get_unit()
	- All BUS_PRINT_CHILD methods return the number of
	  characters output.

Reviewed by: dfr, peter
1999-07-29 01:03:04 +00:00
Doug Rabson
aa595accc9 Add support for SYS_RES_DENSE and SYS_RES_BWX resource types. These are
equivalent to SYS_RES_MEMORY for x86 but for alpha, the rman_get_virtual()
address of the resource is initialised to point into either dense-mapped
or bwx-mapped space respectively, allowing direct memory pointers to be
used to device memory.

Reviewed by: Andrew Gallatin <gallatin@cs.duke.edu>
1999-07-28 07:57:48 +00:00
Matthew N. Dodd
0158b2dcc3 Case matters.
DEv_METHOD to DEV_METHOD.
1999-07-27 05:08:36 +00:00
Matthew N. Dodd
5a8cee9a60 Implement the BUS_PROBE_NOMATCH method for the PCI bus.
This function is called for each device for which no driver
was found.

Output is similar to the eisa_probe_nomatch() function but with the
added benefit of displaying the assigned IRQ (since PCI gives us
this information up front.)

Output is like so:

pci0: unknown card CPQ0508 (vendor=0x0e11, dev=0x0508) at 11.0 irq 9
pci0: unknown card DFZ0508 (vendor=0x10da, dev=0x0508) at 11.0 irq 9
pci0: unknown card DBL0508 (vendor=0x104c, dev=0x0508) at 11.0 irq 9
pci0: unknown card DDM0011 (vendor=0x108d, dev=0x0011) at 11.0 irq 9

I'm not happy with the 3 lines of macro cruft that got added but
I consider it a temporary annoyance as those bits will be moved to
some place where PCI, EISA and ISAPNP code will be able to use them.

(Not surprisingly, this message is longer than the code in question.)

Reviewed by: peter, dfr
1999-07-27 04:28:14 +00:00
Peter Wemm
9929d2a045 Eliminate a bunch of #include "pci.h" and #if NPCI > 0 around entire
files.  config will leave the whole file out if configured to do so.
1999-07-03 20:17:08 +00:00
Peter Wemm
f078b1e075 #include <machine/md_var.h> to bring the prototype for
alpha_platform_assign_pciintr() into scope (!).
1999-07-01 22:58:03 +00:00
Roger Hardiman
153eb46fb6 On the new Meteor cards, the Philips SAA 7116 is connected to the PCI bus
via an IBM PCI-PCI bridge (82351 or 82352 or 82353)

The driver must identify if it is on a secondary PCI bus, which is
created via the IBM PCI-PCI bridge. If it is, then it must initialise
the IBM PCI-PCI bridge correctly.

To do this, the following new functions are added.
Because they use the pcici_t tag, they are considered 2.2 compatibility APIs
  pcici_t * pci_get_parent_from_tag(pcici_t tag);
  int       pci_get_bus_from_tag(pcici_t tag);

(The _from_tag suffix is used to prevent clashes with similarly named
 newbus PCI API functions)

Submitted by: Anton Berezin <tobez@plab.ku.dk>
Reviewed by:  Doug Rabson <dfr@nlsystems.com>
Reworked by:  Me (roger)
1999-05-31 22:13:37 +00:00
Poul-Henning Kamp
2447bec829 Simplify cdevsw registration.
The cdevsw_add() function now finds the major number(s) in the
struct cdevsw passed to it.  cdevsw_add_generic() is no longer
needed, cdevsw_add() does the same thing.

cdevsw_add() will print an message if the d_maj field looks bogus.

Remove nblkdev and nchrdev variables.  Most places they were used
bogusly.  Instead check a dev_t for validity by seeing if devsw()
or bdevsw() returns NULL.

Move bdevsw() and devsw() functions to kern/kern_conf.c

Bump __FreeBSD_version to 400006

This commit removes:
        72 bogus makedev() calls
        26 bogus SYSINIT functions

if_xe.c bogusly accessed cdevsw[], author/maintainer please fix.

I4b and vinum not changed.  Patches emailed to authors.  LINT
probably broken until they catch up.
1999-05-31 11:29:30 +00:00
Poul-Henning Kamp
4e2f199e0c This commit should be a extensive NO-OP:
Reformat and initialize correctly all "struct cdevsw".

        Initialize the d_maj and d_bmaj fields.

        The d_reset field was not removed, although it is never used.

I used a program to do most of this, so all the files now use the
same consistent format.  Please keep it that way.

Vinum and i4b not modified, patches emailed to respective authors.
1999-05-30 16:53:49 +00:00
Doug Rabson
bcbb365b6b In pci_alloc_resource() only check start and end to see if its a default. 1999-05-30 10:54:31 +00:00
Andrew Gallatin
aa6de8e012 Add support for multiple PCI "hoses" used on various alpha platforms.
The specific intent of this commit is to pave the way for importing
Compaq XP1000 support.  These changes should not affect the i386 port.

Reviewed by: Doug Rabson <dfr@nlsystems.com>
(actually, he walked me through most of it & deserves more than reviewd-by
credit )
1999-05-20 15:33:33 +00:00
Doug Rabson
41787a353d Add missing suspend/resume methods. 1999-05-10 17:56:23 +00:00
Peter Wemm
cc97c921ab For the ioctl that reads the pci configuration, look up the name and unit
on the fly so that we can see the driver assignment of new pci devices
as well in the 'pciconf -l' display.
1999-05-09 20:27:26 +00:00
Peter Wemm
c0ccf7c6b6 Argh, don't clobber the pci device list if there are multiple busses!
(An AGP counts as a PCI bus, it seems...)
This stopped 'pciconf -l' from working on AGP or PCI->PCI bridge systems.
1999-05-09 15:54:04 +00:00
Doug Rabson
566643e39e Move the declaration of the interrupt type from the driver structure
to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
Peter Wemm
141ed0620b Print 'irq nn' on the device attach line like the old pci code did.
However, we are not printing 'int a/b/c/d' yet, is it worth it on non-SMP
systems?  (It's useful when tracing PCI->IO-APIC routing on SMP systems)
1999-05-08 20:28:01 +00:00
Peter Wemm
31c82d832c GC pci_bushigh() - no longer used. 1999-05-08 18:09:53 +00:00
Peter Wemm
2850fee53f Fix a goof on my part; s/struct moduledata */struct module */ 1999-05-06 22:05:39 +00:00
Peter Wemm
46f40af052 Replace the pcidevice_set linker set based configuration mechanism for old
style pci drivers with a simple one-line change to use a module that
registers itself under new-bus and should in theory enable just about all
of the pci drivers to be loadable (kldload and loader(8)) but without
having the impact of converting the APIs yet.

This also fixes the problem of having undefined variables when only
new-style pci drivers are present.
1999-04-24 19:59:20 +00:00
Peter Wemm
6182fdbda8 Bring the 'new-bus' to the i386. This extensively changes the way the
i386 platform boots, it is no longer ISA-centric, and is fully dynamic.
Most old drivers compile and run without modification via 'compatability
shims' to enable a smoother transition.  eisa, isapnp and pccard* are
not yet using the new resource manager.  Once fully converted, all drivers
will be loadable, including PCI and ISA.

(Some other changes appear to have snuck in, including a port of Soren's
 ATA driver to the Alpha.  Soren, back this out if you need to.)

This is a checkpoint of work-in-progress, but is quite functional.

The bulk of the work was done over the last few years by Doug Rabson and
Garrett Wollman.

Approved by:	core
1999-04-16 21:22:55 +00:00
Eivind Eklund
66235db57f Staticize. 1999-04-11 02:50:42 +00:00
Stefan Eßer
441e39d74a Fix problem with zero valued map registers followed by valid map entries.
The previous code just ignored the invalid map register, but this gave
surprising results because of the way pci_map_port() associated the map
register offset supplied with a map entry in the map array.
1999-01-19 23:29:20 +00:00
Eivind Eklund
44b74eef5c Remove 'pci_bridgeto' - it was just an empty placeholder. 1999-01-12 01:44:42 +00:00
Peter Wemm
96fca41fcf s/%#p/%p/ to fix a warning. This looks like a leftover of once being
%#x, which causes a leading 0x to be prepended. %p has this by default
and the '#' is ignored by the kernel prinf code for %p.
1998-11-09 08:08:06 +00:00
Julian Elischer
cd8ab93c90 In the cyrix Cx5530, there are null (empty) Base address registers before the
base register that controls Ultra-DMA, so we need to examine all possible
base registers instead of just giving up at the first empty one.
Also, looking at the source code to the BIOS, I see that they are also
checking for 0xffffffff as an invalid value so do the same. Stefan may like
to clean this up, but at least now I can find my PCI IDE registers.
1998-11-03 08:47:29 +00:00
Doug Rabson
98ffb0c4f2 Some workarounds for a common DEC pci-pci bridge found on alphas.
Fix printf format errors which show up on the alpha.
1998-09-16 08:28:11 +00:00
Justin T. Gibbs
5ee58402df Correct printf format bugs. 1998-09-15 22:05:44 +00:00
Justin T. Gibbs
06915ea69a Revive PCIConf.
Submitted by:	"Kenneth D. Merry" <ken@plutotech.com>
1998-09-15 08:21:13 +00:00
Tor Egge
572d053e17 Maintain a mapping from irq number to (ioapic number, int pin) tuple,
and use this when masking/unmasking interrupts.

Maintain a mapping from (iopaic number, int pin) tuple to irq number,
and use this when configuring devices and programming the ioapics.

Previous code assumed that irq number was equal to int pin number, and
that the ioapic number was 0.

Don't let an AP enter _cpu_switch before all local apics are initialized.
1998-09-06 22:41:42 +00:00
Justin T. Gibbs
188fafbc3f Use "baseclass" instead of "class" for storing the contents of PCI register
0xB so that C++ programs can use the PCI conf interface.
1998-08-13 19:12:20 +00:00
Doug Rabson
e8669bcd43 Add a call to a platform-specific irq remapping function for alpha platforms
which don't record the correct irqs in PCI config space.

Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-07-22 08:40:46 +00:00
Doug Rabson
ecbb00a262 This commit fixes various 64bit portability problems required for
FreeBSD/alpha.  The most significant item is to change the command
argument to ioctl functions from int to u_long.  This change brings us
inline with various other BSD versions.  Driver writers may like to
use (__FreeBSD_version == 300003) to detect this change.

The prototype FreeBSD/alpha machdep will follow in a couple of days
time.
1998-06-07 17:13:14 +00:00
Tor Egge
5758c2de94 Add two workarounds for broken MP tables:
- Attempt to handle PCI devices where the interrupt is
	  an ISA/EISA interrupt according to the mp table.

	- Attempt to handle multiple IO APIC pins connected to
	  the same PCI or ISA/EISA interrupt source.  Print a
	  warning if this happens, since performance is suboptimal.
	  This workaround is only used for PCI devices.

With these two workarounds, the -SMP kernel is capable of running on
my Asus P/I-P65UP5 motherboard when version 1.4 of the MP table is disabled.
1998-04-01 21:07:37 +00:00
Eivind Eklund
7b778b5e61 Make all file-system (MFS, FFS, NFS, LFS, DEVFS) related option new-style.
This introduce an xxxFS_BOOT for each of the rootable filesystems.
(Presently not required, but encouraged to allow a smooth move of option *FS
to opt_dontuse.h later.)

LFS is temporarily disabled, and will be re-enabled tomorrow.
1998-01-24 02:54:56 +00:00
Poul-Henning Kamp
4a11ca4e29 Remove a bunch of variables which were unused both in GENERIC and LINT.
Found by:	-Wunused
1997-11-07 08:53:44 +00:00
Peter Wemm
35b8b2ddab Update select -> poll in drivers. 1997-09-14 03:19:42 +00:00
Bruce Evans
1fd0b0588f Removed unused #includes. 1997-08-02 14:33:27 +00:00
Steve Passe
91f7398bca Modified to use renamed get_pci_apic_irq() -> pci_apic_pin() function. 1997-06-25 20:56:29 +00:00
Stefan Eßer
1a26f4c024 Move call of pci_addcfg() before test of cfg->subordinatebus, since the
device probe of a host to PCI bridge may modify that value, based on
its knowledge of device specific registers. This makes the Intel XXpress
work, as verified by: Terje Marthinussen <terjem@cc.uit.no>.
1997-06-02 19:59:01 +00:00
Stefan Eßer
a9ad937362 Two minor changes to the code that builds the pci map array:
1) Stop at the first map register that contains a zero value.
2) When testing for the map size work up from low values, since
   this works around a bug in some BusLogic SCSI card, which has
   the 16 upper port base address bits hardwired to zero.

The config register dump printed in the bootverbose case has
been slightly rearranged.
1997-05-28 10:01:03 +00:00
Steve Passe
6ef807e505 Minor cleanup of APIC_IO code.
Submitted by:	Stefan Esser <se@freebsd.org>
1997-05-27 19:24:36 +00:00
Steve Passe
ce595b36d5 Add support for APIC_IO to pci IRQ configuration.
The support for APIC_IO was lost in the new set of pci modules.  This patch
restores the ability to build SMP/APIC_IO kernels.
1997-05-27 04:09:01 +00:00
Stefan Eßer
5bec615793 Completely replace the PCI bus driver code to make it better reflect
reality. There will be a new call interface, but for now the file
pci_compat.c (which is to be deleted, after all drivers are converted)
provides an emulation of the old PCI bus driver functions. The only
change that might be visible to drivers is, that the type pcici_t
(which had been meant to be just a handle, whose exact definition
should not be relied on), has been converted into a pcicfgregs* .

The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t
and has been converted to just call the PCI drivers functions to access
configuration space register, instead of inventing its own ...

This code is by no means complete, but assumed to be fully operational,
and brings the official code base more in line with my development code.

A new generic device descriptor data type has to be agreed on. The PCI
code will then use that data type to provide new functionality:

1) userconfig support
2) "wired" PCI devices
3) conflicts checking against ISA/EISA
4) maps will depend on the command register enable bits
5) PCI to Anything bridges can be defined as devices,
   and are probed like any "standard" PCI device.

The following features are currently missing, but will be added back,
soon:

1) unknown device probe message
2) suppression of "mirrored" devices caused by ancient, broken chip-sets

This code relies on generic shared interrupt support just commited to
kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
Poul-Henning Kamp
b038679c5c Initialize PCI/CardBus bridges.
Tested on:	HP Omnibook 800 / TI PCI1130
Reviewed by:	se
1997-05-03 13:52:29 +00:00
Peter Wemm
477a642cee Man the liferafts! Here comes the long awaited SMP -> -current merge!
There are various options documented in i386/conf/LINT, there is more to
come over the next few days.

The kernel should run pretty much "as before" without the options to
activate SMP mode.

There are a handful of known "loose ends" that need to be fixed, but
have been put off since the SMP kernel is in a moderately good condition
at the moment.

This commit is the result of the tinkering and testing over the last 14
months by many people.  A special thanks to Steve Passe for implementing
the APIC code!
1997-04-26 11:46:25 +00:00
Stefan Eßer
7cb74fcfa2 Add preliminary support for PCI config header type 2:
Fetch subvendor/device ID from config space register 0x40.
1997-04-23 19:43:20 +00:00
Stefan Eßer
6072387d65 Fix printing of map sizes: large numbers got a negative sign before. 1997-03-25 19:12:08 +00:00
Stefan Eßer
ee88645781 Add a few vendor IDs and class and sub-class encodings.
Submitted by:	phk
1997-03-25 19:01:46 +00:00