ARM: treat [N x i32] and [N x i64] as AAPCS composite types
The logic is almost there already, with our special homogeneous
aggregate handling. Tweaking it like this allows front-ends to emit
AAPCS compliant code without ever having to count registers or add
discarded padding arguments.
Only arrays of i32 and i64 are needed to model AAPCS rules, but I
decided to apply the logic to all integer arrays for more consistency.
This fixes a possible "Unexpected member type for HA" error when
compiling lib/msun/bsdsrc/b_tgamma.c for armv6.
Reported by: Jakub Palider <jpa@semihalf.com>
These are generated, and not "optimized" in any way, since I am not
entirely sure of the syntax or format of this type of file. Feel free
to suggest ways of shortening these lists.
The general idea is the same for all three files, though:
* Get rid of upstream build infrastructure (CMakeLists, Makefiles, etc)
* Delete tests, tools and utilities we don't want or use (including
samples)
* Remove various bits of upstream metadata files that we don't want or
use (.arcconfig, .gitignore, etc)
compatibility with some sites
This change comes from 8.15 but is being backported to FreeBSD releases
not yet using 8.15.
MFC after: 3 days
Noted by: julian@
Refactor float to integer conversion to share the same code.
80bit Intel/PPC long double is excluded due to lacking support
for the abstraction. Consistently provide saturation logic.
Extend to long double on 128bit IEEE extended platforms.
Initial patch with test cases from GuanHong Liu.
Reviewed by Steve Canon.
Differential Revision: http://reviews.llvm.org/D2804
Pull in r232107 from upstream compiler-rt trunk (by Ed Maste):
Use signed int implementation for __fixint
Requested by: emaste
Get tests running with warnings. Fix warnings in headers and tests
This fixes a number of -Wunused-local-typedef warnings in libc++ headers.
MFC after: 3 days
Release 2015a - 2015-01-29
Changes affecting future time stamps
The Mexican state of Quintana Roo, represented by America/Cancun,
will shift from Central Time with DST to Eastern Time without DST
on 2015-02-01 at 02:00. (Thanks to Steffen Thorsen and Gwillim Law.)
Chile will not change clocks in April or thereafter; its new standard time
will be its old daylight saving time. This affects America/Santiago,
Pacific/Easter, and Antarctica/Palmer. (Thanks to Juan Correa.)
New leap second 2015-06-30 23:59:60 UTC as per IERS Bulletin C 49.
(Thanks to Tim Parenti.)
Changes affecting past time stamps
Iceland observed DST in 1919 and 1921, and its 1939 fallback
transition was Oct. 29, not Nov. 29. Remove incorrect data from
Shanks about time in Iceland between 1837 and 1908.
Some more zones have been turned into links, when they differed
from existing zones only for older time stamps. As usual,
these changes affect UTC offsets in pre-1970 time stamps only.
Their old contents have been moved to the 'backzone' file.
The affected zones are: Asia/Aden, Asia/Bahrain, Asia/Kuwait,
and Asia/Muscat.
Commit r279154 changed the API and ABI significantly, and {NZERO} is still
wrong.
Also, preserve errno on success instead of setting it to 0.
PR: 189821
Reported by: bde
Relnotes: yes
bfd_dwarf2_find_line() calls find_line() with NULL functionname_ptr,
which resulted in a crash on certain ELF objects.
This change was implemented independently from upstream binutils, but
I have checked that the crash does not happen there.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
This can occur when DW_AT_specification is used to refer to another DIE
that provides the actual DW_AT_name string. For example:
< 3><0x00000086> DW_TAG_subprogram
DW_AT_name PrettyStackTraceEntry
...
< 1><0x00002cf4> DW_TAG_subprogram
DW_AT_specification <0x00000086>
We will need to add support for DW_AT_specification, but in the interim
we should not segfault.
Obtained from: Elftoolchain (r3170)
Sponsored by: The FreeBSD Foundation
The primary focus of these changes is to modernize FreeBSD's
tape infrastructure so that we can take advantage of some of the
features of modern tape drives and allow support for LTFS.
Significant changes and new features include:
o sa(4) driver status and parameter information is now exported via an
XML structure. This will allow for changes and improvements later
on that will not break userland applications. The old MTIOCGET
status ioctl remains, so applications using the existing interface
will not break.
o 'mt status' now reports drive-reported tape position information
as well as the previously available calculated tape position
information. These numbers will be different at times, because
the drive-reported block numbers are relative to BOP (Beginning
of Partition), but the block numbers calculated previously via
sa(4) (and still provided) are relative to the last filemark.
Both numbers are now provided. 'mt status' now also shows the
drive INQUIRY information, serial number and any position flags
(BOP, EOT, etc.) provided with the tape position information.
'mt status -v' adds information on the maximum possible I/O size,
and the underlying values used to calculate it.
o The extra sa(4) /dev entries (/dev/saN.[0-3]) have been removed.
The extra devices were originally added as place holders for
density-specific device nodes. Some OSes (NetBSD, NetApp's OnTap
and Solaris) have had device nodes that, when you write to them,
will automatically select a given density for particular tape drives.
This is a convenient way of switching densities, but it was never
implemented in FreeBSD. Only the device nodes were there, and that
sometimes confused users.
For modern tape devices, the density is generally not selectable
(e.g. with LTO) or defaults to the highest availble density when
the tape is rewritten from BOT (e.g. TS11X0). So, for most users,
density selection won't be necessary. If they do need to select
the density, it is easy enough to use 'mt density' to change it.
o Protection information is now supported. This is either a
Reed-Solomon CRC or CRC32 that is included at the end of each block
read and written. On write, the tape drive verifies the CRC, and
on read, the tape drive provides a CRC for the userland application
to verify.
o New, extensible tape driver parameter get/set interface.
o Density reporting information. For drives that support it,
'mt getdensity' will show detailed information on what formats the
tape drive supports, and what formats the tape drive supports.
o Some mt(1) functionality moved into a new mt(3) library so that
external applications can reuse the code.
o The new mt(3) library includes helper routines to aid in parsing
the XML output of the sa(4) driver, and build a tree of driver
metadata.
o Support for the MTLOAD (load a tape in the drive) and MTWEOFI
(write filemark immediate) ioctls needed by IBM's LTFS
implementation.
o Improve device departure behavior for the sa(4) driver. The previous
implementation led to hangs when the device was open.
o This has been tested on the following types of drives:
IBM TS1150
IBM TS1140
IBM LTO-6
IBM LTO-5
HP LTO-2
Seagate DDS-4
Quantum DLT-4000
Exabyte 8505
Sony DDS-2
contrib/groff/tmac/doc-syms,
share/mk/bsd.libnames.mk,
lib/Makefile,
Add libmt.
lib/libmt/Makefile,
lib/libmt/mt.3,
lib/libmt/mtlib.c,
lib/libmt/mtlib.h,
New mt(3) library that contains functions moved from mt(1) and
new functions needed to interact with the updated sa(4) driver.
This includes XML parser helper functions that application writers
can use when writing code to query tape parameters.
rescue/rescue/Makefile:
Add -lmt to CRUNCH_LIBS.
src/share/man/man4/mtio.4
Clarify this man page a bit, and since it contains what is
essentially the mtio.h header file, add new ioctls and structure
definitions from mtio.h.
src/share/man/man4/sa.4
Update BUGS and maintainer section.
sys/cam/scsi/scsi_all.c,
sys/cam/scsi/scsi_all.h:
Add SCSI SECURITY PROTOCOL IN/OUT CDB definitions and CDB building
functions.
sys/cam/scsi/scsi_sa.c
sys/cam/scsi/scsi_sa.h
Many tape driver changes, largely outlined above.
Increase the sa(4) driver read/write timeout from 4 to 32
minutes. This is based on the recommended values for IBM LTO
5/6 drives. This may also avoid timeouts for other tape
hardware that can take a long time to do retries and error
recovery. Longer term, a better way to handle this is to ask
the drive for recommended timeout values using the REPORT
SUPPORTED OPCODES command. Modern IBM and Oracle tape drives
at least support that command, and it would allow for more
accurate timeout values.
Add XML status generation. This is done with a series of
macros to eliminate as much duplicate code as possible. The
new XML-based status values are reported through the new
MTIOCEXTGET ioctl.
Add XML driver parameter reporting, using the new MTIOCPARAMGET
ioctl.
Add a new driver parameter setting interface, using the new
MTIOCPARAMSET and MTIOCSETLIST ioctls.
Add a new MTIOCRBLIM ioctl to get block limits information.
Add CCB/CDB building routines scsi_locate_16, scsi_locate_10,
and scsi_read_position_10().
scsi_locate_10 implements the LOCATE command, as does the
existing scsi_set_position() command. It just supports
additional arguments and features. If/when we figure out a
good way to provide backward compatibility for older
applications using the old function API, we can just revamp
scsi_set_position(). The same goes for
scsi_read_position_10() and the existing scsi_read_position()
function.
Revamp sasetpos() to take the new mtlocate structure as an
argument. It now will use either scsi_locate_10() or
scsi_locate_16(), depending upon the arguments the user
supplies. As before, once we change position we don't have a
clear idea of what the current logical position of the tape
drive is.
For tape drives that support long form position data, we
read the current position and store that for later reporting
after changing the position. This should help applications
like Bacula speed tape access under FreeBSD once they are
modified to support the new ioctls.
Add a new quirk, SA_QUIRK_NO_LONG_POS, that is set for all
drives that report SCSI-2 or older, as well as drives that
report an Illegal Request type error for READ POSITION with
the long format. So we should automatically detect drives
that don't support the long form and stop asking for it after
an initial try.
Add a partition number to the sa(4) softc.
Improve device departure handling. The previous implementation
led to hangs when the device was open.
If an application had the sa(4) driver open, and attempted to
close it after it went away, the cam_periph_release() call in
saclose() would cause the periph to get destroyed because that
was the last reference to it. Because destroy_dev() was
called from the sa(4) driver's cleanup routine (sacleanup()),
and would block waiting for the close to happen, a deadlock
would result.
So instead of calling destroy_dev() from the cleanup routine,
call destroy_dev_sched_cb() from saoninvalidate() and wait for
the callback.
Acquire a reference for devfs in saregister(), and release it
in the new sadevgonecb() routine when all devfs devices for
the particular sa(4) driver instance are gone.
Add a new function, sasetupdev(), to centralize setting
per-instance devfs device parameters instead of repeating the
code in saregister().
Add an open count to the softc, so we know how many
peripheral driver references are a result of open
sessions.
Add the D_TRACKCLOSE flag to the cdevsw flags so
that we get a 1:1 mapping of open to close calls
instead of a N:1 mapping.
This should be a no-op for everything except the
control device, since we don't allow more than one
open on non-control devices.
However, since we do allow multiple opens on the
control device, the combination of the open count
and the D_TRACKCLOSE flag should result in an
accurate peripheral driver reference count, and an
accurate open count.
The accurate open count allows us to release all
peripheral driver references that are the result
of open contexts once we get the callback from devfs.
sys/sys/mtio.h:
Add a number of new mt(4) ioctls and the requisite data
structures. None of the existing interfaces been removed
or changed.
This includes definitions for the following new ioctls:
MTIOCRBLIM /* get block limits */
MTIOCEXTLOCATE /* seek to position */
MTIOCEXTGET /* get tape status */
MTIOCPARAMGET /* get tape params */
MTIOCPARAMSET /* set tape params */
MTIOCSETLIST /* set N params */
usr.bin/mt/Makefile:
mt(1) now depends on libmt, libsbuf and libbsdxml.
usr.bin/mt/mt.1:
Document new mt(1) features and subcommands.
usr.bin/mt/mt.c:
Implement support for mt(1) subcommands that need to
use getopt(3) for their arguments.
Implement a new 'mt status' command to replace the old
'mt status' command. The old status command has been
renamed 'ostatus'.
The new status function uses the MTIOCEXTGET ioctl, and
therefore parses the XML data to determine drive status.
The -x argument to 'mt status' allows the user to dump out
the raw XML reported by the kernel.
The new status display is mostly the same as the old status
display, except that it doesn't print the redundant density
mode information, and it does print the current partition
number and position flags.
Add a new command, 'mt locate', that will supersede the
old 'mt setspos' and 'mt sethpos' commands. 'mt locate'
implements all of the functionality of the MTIOCEXTLOCATE
ioctl, and allows the user to change the logical position
of the tape drive in a number of ways. (Partition,
block number, file number, set mark number, end of data.)
The immediate bit and the explicit address bits are
implemented, but not documented in the man page.
Add a new 'mt weofi' command to use the new MTWEOFI ioctl.
This allows the user to ask the drive to write a filemark
without waiting around for the operation to complete.
Add a new 'mt getdensity' command that gets the XML-based
tape drive density report from the sa(4) driver and displays
it. This uses the SCSI REPORT DENSITY SUPPORT command
to get comprehensive information from the tape drive about
what formats it is able to read and write.
Add a new 'mt protect' command that allows getting and setting
tape drive protection information. The protection information
is a CRC tacked on to the end of every read/write from and to
the tape drive.
Sponsored by: Spectra Logic
MFC after: 1 month
LoopRotate: When reconstructing loop simplify form don't split edges
from indirectbrs.
Yet another chapter in the endless story. While this looks like we
leave the loop in a non-canonical state this replicates the logic in
LoopSimplify so it doesn't diverge from the canonical form in any way.
http://llvm.org/PR21968
This fixes a "Cannot split critical edge from IndirectBrInst" assertion
failure when building the devel/radare2 port.
PR: 195480, 196987
MFC after: 3 days
against rules. It definitely doesn't need to know about kernel internals,
such as 'struct ifaddr'. What it does with ifaddr, is that it only takes
ifa_addr member of it, and treats it as sockaddr, while it is only a pointer
to sockaddr. Fortunately, sizeof(struct ifaddr) > sizeof(struct sockaddr_in6),
so no problems arise.
Fix that declaring a private struct ifaddr in ipftest(1) and stop including
if_var.h.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
FreeBSD core files have no section table and thus LLDB's OS and vendor
detection logic does not work. If we encounter such an ELF file, update
an unknown OS to match the host.
This is not really the correct way to handle this, but more extensive
rework of ObjectFileELF will be needed and this change restores cross-
arch core debugging until that can be completed.
update paths; and include everything in the "base" distribution.
The "games" distribution being optional made sense when there were more
games and we had small disks; but the "games-like" games were moved into
the ports tree a dozen years ago and the remaining "utility-like" games
occupy less than 0.001% of my laptop's small hard drive. Meanwhile every
new user is confronted by the question "do you want games installed" when
they they try to install FreeBSD.
The next steps will be:
2. Removing punch card (bcd, ppt), phase-of-moon (pom), clock (grdc), and
caesar cipher (caesar, rot13) utilities. I intend to keep fortune, factor,
morse, number, primes, and random, since there is evidence that those are
still being used.
3. Merging src/games into src/usr.bin.
This change will not be MFCed.
Reviewed by: jmg
Discussed at: EuroBSDCon
Approved by: gjb (release-affecting changes)
