The name trunk is misused as the networking term trunk means carrying multiple
VLANs over a single connection. The IEEE standard for link aggregation (802.3
section 3) does not talk about 'trunk' at all while it is used throughout IEEE
802.1Q in describing vlans.
The lagg(4) driver provides link aggregation, failover and fault tolerance.
Discussed on: current@
tolerance. This driver allows aggregation of multiple network interfaces as
one virtual interface using a number of different protocols/algorithms.
failover - Sends traffic through the secondary port if the master becomes
inactive.
fec - Supports Cisco Fast EtherChannel.
lacp - Supports the IEEE 802.3ad Link Aggregation Control Protocol
(LACP) and the Marker Protocol.
loadbalance - Static loadbalancing using an outgoing hash.
roundrobin - Distributes outgoing traffic using a round-robin scheduler
through all active ports.
This code was obtained from OpenBSD and this also includes 802.3ad LACP support
from agr(4) in NetBSD.
structures. Detect when ifnet instances are detached from the network
stack and perform appropriate cleanup to prevent memory leaks.
This has been implemented in such a way as to be backwards ABI compatible.
Kernel consumers are changed to use if_delmulti_ifma(); in_delmulti()
is unable to detect interface removal by design, as it performs searches
on structures which are removed with the interface.
With this architectural change, the panics FreeBSD users have experienced
with carp and pfsync should be resolved.
Obtained from: p4 branch bms_netdev
Reviewed by: andre
Sponsored by: Garance A Drosehn
Idea from: NetBSD
MFC after: 1 month
a link-layer multicast group membership.
Such memberships are needed in order to support protocols such as
IS-IS without putting the interface into PROMISC or ALLMULTI modes.
sa_equal() is not OK for comparing sockaddr_dl as it has deeper structure
than a simple byte array, so add sa_dl_equal() and use that instead.
Reviewed by: rwatson
Verified with: /usr/sbin/mtest
Bug found by: Jouke Witteveen
MFC after: 2 weeks
if_watchdog/if_timer interface doesn't fit modern SMP network
stack design.
Device drivers that need watchdog to monitor their hardware should
implement it theirselves.
Eventually the if_watchdog/if_timer API will be removed. For now,
warn that driver uses it.
Reviewed by: scottl
specific privilege names to a broad range of privileges. These may
require some future tweaking.
Sponsored by: nCircle Network Security, Inc.
Obtained from: TrustedBSD Project
Discussed on: arch@
Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri,
Alex Lyashkov <umka at sevcity dot net>,
Skip Ford <skip dot ford at verizon dot net>,
Antoine Brodin <antoine dot brodin at laposte dot net>
begun with a repo-copy of mac.h to mac_framework.h. sys/mac.h now
contains the userspace and user<->kernel API and definitions, with all
in-kernel interfaces moved to mac_framework.h, which is now included
across most of the kernel instead.
This change is the first step in a larger cleanup and sweep of MAC
Framework interfaces in the kernel, and will not be MFC'd.
Obtained from: TrustedBSD Project
Sponsored by: SPARTA
and skip over the normal IP processing.
Add a supporting function ifa_ifwithbroadaddr() to verify and validate the
supplied subnet broadcast address.
PR: kern/99558
Tested by: Andrey V. Elsukov <bu7cher-at-yandex.ru>
Sponsored by: TCP/IP Optimization Fundraise 2005
MFC after: 3 days
parameter that can specify configuration parameters:
o rev cloner api's to add optional parameter block
o add SIOCCREATE2 that accepts parameter data
o rev vlan support to use new api (maintain old code)
Reviewed by: arch@
except in places dealing with ifaddr creation or destruction; and
in such special places incomplete ifaddrs should never be linked
to system-wide data structures. Therefore we can eliminate all the
superfluous checks for "ifa->ifa_addr != NULL" and get ready
to the system crashing honestly instead of masking possible bugs.
Suggested by: glebius, jhb, ru
list.
- First remove from global list, then start destroying.
PR: kern/97679
Submitted by: Alex Lyashkov <shadow itt.net.ru>
Reviewed by: rwatson, brooks
order to - for example - apply firewall rules to a whole group of
interfaces. This is required for importing pf from OpenBSD 3.9
Obtained from: OpenBSD (with changes)
Discussed on: -net (back in April)
notification so all interfaces including pseudo are reported. When netif
creates the clones at startup devctl_disable has not been turned off yet so the
interfaces will not be initialised twice, enforce this by adding an explicit
order between rc.d/netif and rc.d/devd.
This change allows actions to taken in userland when an interface is cloned
and the pseudo interface will be automatically configured if a ifconfig_<int>=""
line exists in rc.conf.
Reviewed by: brooks
No objections on: net
work by yar, thompsa and myself. The checksum offloading part also involves
work done by Mihail Balikov.
The most important changes:
o Instead of global linked list of all vlan softc use a per-trunk
hash. The size of hash is dynamically adjusted, depending on
number of entries. This changes struct ifnet, replacing counter
of vlans with a pointer to trunk structure. This change is an
improvement for setups with big number of VLANs, several interfaces
and several CPUs. It is a small regression for a setup with a single
VLAN interface.
An alternative to dynamic hash is a per-trunk static array with
4096 entries, which is a compile time option - VLAN_ARRAY. In my
experiments the array is not an improvement, probably because such
a big trunk structure doesn't fit into CPU cache.
o Introduce an UMA zone for VLAN tags. Since drivers depend on it,
the zone is declared in kern_mbuf.c, not in optional vlan(4) driver.
This change is a big improvement for any setup utilizing vlan(4).
o Use rwlock(9) instead of mutex(9) for locking. We are the first
ones to do this! :)
o Some drivers can do hardware VLAN tagging + hardware checksum
offloading. Add an infrastructure for this. Whenever vlan(4) is
attached to a parent or parent configuration is changed, the flags
on vlan(4) interface are updated.
In collaboration with: yar, thompsa
In collaboration with: Mihail Balikov <mihail.balikov interbgc.com>
rather than in ifindex_table[]; all (except one) accesses are
through ifp anyway. IF_LLADDR() works faster, and all (except
one) ifaddr_byindex() users were converted to use ifp->if_addr.
- Stop storing a (pointer to) Ethernet address in "struct arpcom",
and drop the IFP2ENADDR() macro; all users have been converted
to use IF_LLADDR() instead.
copy of Ethernet address.
- Change iso88025_ifattach() and fddi_ifattach() to accept MAC
address as an argument, similar to ether_ifattach(), to make
this work.
as it is done for usual promiscuous mode already. This info is important
because promiscuous mode in the hands of a malicious party can jeopardize
the whole network.
panics, which occur when stale ifnet pointers are left in struct
moptions hung off of inpcbs:
- Add in_ifdetach(), which matches in6_ifdetach(), and allows the
protocol to perform early tear-down on the interface early in
if_detach().
- Annotate that if_detach() needs careful consideration.
- Remove calls to in_pcbpurgeif0() in the handling of SIOCDIFADDR --
this is not the place to detect interface removal! This also
removes what is basically a nasty (and now unnecessary) hack.
- Invoke in_pcbpurgeif0() from in_ifdetach(), in both raw and UDP
IPv4 sockets.
It is now possible to run the msocket_ifnet_remove regression test
using HEAD without panicking.
MFC after: 3 days
struct ifnet most of if_findindex() become a complex no-op. Remove it
and replace it with a corrected version of the four line for loop it
devolved to plus some error handling. This should probably be replaced
with subr_unit at some point.
Switch from checking ifaddr_byindex to ifnet_byindex when looking for
empty indexes. Since we're doing this from if_alloc/if_free, we can
only be sure that ifnet_byindex will be correct. This fixes panics when
loading the ef(4) module. The panics were caused by the fact that
if_alloc was called four time before if_attach was called and thus
ifaddr_byindex was not set and the same unit was allocated again. This
in turn caused the first if_attach to fail because the ifp was not the
one in ifnet_byindex(ifp->if_index).
Reported by: "Wojciech A. Koszek" <dunstan at freebsd dot czest dot pl>
PR: kern/84987
MFC After: 1 day
- Add a note that additions should be made to if_free_type and not
if_free to help avoid this in the future.
This apparently fixes a use after free in if_bridge and may fix bugs
in other direct if_free_type consumers.
Reported by: thompsa
and move both flags from ifnet.if_flags to ifnet.if_drv_flags, making
and documenting the locking of these flags the responsibility of the
device driver, not the network stack. The flags for these two fields
will be mutually exclusive so that they can be exposed to user space as
though they were stored in the same variable.
Provide #defines to provide the old names #ifndef _KERNEL, so that user
applications (such as ifconfig) can use the old flag names. Using the
old names in a device driver will result in a compile error in order to
help device driver writers adopt the new model.
When exposing the interface flags to user space, via interface ioctls
or routing sockets, or the two fields together. Since the driver flags
cannot currently be set for user space, no new logic is currently
required to handle this case.
Add some assertions that general purpose network stack routines, such
as if_setflags(), are not improperly used on driver-owned flags.
With this change, a large number of very minor network stack races are
closed, subject to correct device driver locking. Most were likely
never triggered.
Driver sweep to follow; many thanks to pjd and bz for the line-by-line
review they gave this patch.
Reviewed by: pjd, bz
MFC after: 7 days
if_attach(). This allows ethernet drivers to use it in their routines
to program their MAC filters before ether_ifattach() is called (de(4) is
one such driver). Also, the if_addr mutex is destroyed in if_free()
rather than if_detach(), so there was another potential bug in that a
driver that failed during attach and called if_free() without having
called ether_ifattach() would have tried to destroy an uninitialized mutex.
Reported by: Holm Tiffe holm at freibergnet dot de
Discussed with: rwatson
using ifp->if_addr_mtx:
- Initialize if_addr_mtx when ifnet is initialized.
- Destroy if_addr_mtx when ifnet is torn down.
- Rename ifmaof_ifpforaddr() to if_findmulti(); assert if_addr_mtx.
Staticize.
- Extract ifmultiaddr allocation and initialization into if_allocmulti();
accept a 'mflags' argument to indicate whether or not sleeping is
permitted. This centralizes error handling and address duplication.
- Extract ifmultiaddr tear-down and deallocation in if_freemulti().
- Re-structure if_addmulti() to hold if_addr_mtx around manipulation of
the ifnet multicast address list and reference count manipulation.
Make use of non-sleeping allocations. Annotate the fact that we only
generate routing socket events for explicit address addition, not
implicit link layer address addition.
- Re-structure if_delmulti() to hold if_addr_mtx around manipulation of
the ifnet multicast address list and reference count manipulation.
Annotate the lack of a routing socket event for implicit link layer
address removal.
- De-spl all and sundry.
Problem reported by: Ed Maste <emaste at phaedrus dot sandvine dot ca>
MFC after: 1 week
Compare pointers with NULL rather than treating them as booleans.
Compare pointers with NULL rather than 0 to make it more clear
they are pointers.
Assign pointers value of NULL rather than 0 to make it more clear
they are pointers.
MFC after: 3 days
Some of the (IPv6) cleanup functions send packets to inform peers of the
departure. These packets confused users of ifnet_departure_event (pf at the
moment).
PR: kern/80627
Tested by: Divacky Roman
MFC after: 1 week
- Introduce a helper function if_setflag() containing the code common
to ifpromisc() and if_allmulti() instead of duplicating the code poorly,
with different bugs.
- Call ifp->if_ioctl() in a consistent way: always use more compatible C
syntax and check whether ifp->if_ioctl is not NULL prior to the call.
MFC after: 1 month
- Introducing the possibility of using locks different than mutexes
for the knlist locking. In order to do this, we add three arguments to
knlist_init() to specify the functions to use to lock, unlock and
check if the lock is owned. If these arguments are NULL, we assume
mtx_lock, mtx_unlock and mtx_owned, respectively.
- Using the vnode lock for the knlist locking, when doing kqueue operations
on a vnode. This way, we don't have to lock the vnode while holding a
mutex, in filt_vfsread.
Reviewed by: jmg
Approved by: re (scottl), scottl (mentor override)
Pointyhat to: ssouhlal
Will be happy: everyone
fails.
Move detaching the ifnet from the ifindex_table into if_free so we can
both keep the sanity checks and actually delete the ifnets. [0]
Reported by: gallatin [0]
Approved by: re (blanket)
struct ifnet or the layer 2 common structure it was embedded in have
been replaced with a struct ifnet pointer to be filled by a call to the
new function, if_alloc(). The layer 2 common structure is also allocated
via if_alloc() based on the interface type. It is hung off the new
struct ifnet member, if_l2com.
This change removes the size of these structures from the kernel ABI and
will allow us to better manage them as interfaces come and go.
Other changes of note:
- Struct arpcom is no longer referenced in normal interface code.
Instead the Ethernet address is accessed via the IFP2ENADDR() macro.
To enforce this ac_enaddr has been renamed to _ac_enaddr.
- The second argument to ether_ifattach is now always the mac address
from driver private storage rather than sometimes being ac_enaddr.
Reviewed by: sobomax, sam
so if_tap doesn't need to rely on locally-rolled code to do same.
The observable symptom of if_tap's bzero'ing the address details
was a crash in "ifconfig tap0" after an if_tap device was closed.
Reported By: Matti Saarinen (mjsaarin at cc dot helsinki dot fi)
a taskqueue(9) task. This fixes LORs and adds possibility
to serve such events pseudorecursively, when link state
change of interface causes subsequent change on other
interfaces.
Sponsored by: Rambler
Reviewed by: sam, brooks, mux
clock time to uptime because wall clock time may go backwards.
This is a change in the API which will impact SNMP agents who are using
ifi_epoch to set RFC2233's ifCounterDiscontinuityTime. None are know to
exist today. This will not impact applications that are using the
<index, epoch> tuple to verify interface uniqueness except that it
eliminates a race which could lead to a false assumption of uniqueness.
Because this is a behavior change, bump __FreeBSD_version.
Discussed with: re (jhb, scottl)
MFC after: 3 days
Pointed out by: pkh (way back at EuroBSDCon)
Pointy hat: brooks
