1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-23 11:18:54 +00:00
Commit Graph

583 Commits

Author SHA1 Message Date
Poul-Henning Kamp
b24d30561d Make unused tape bmajors in past tense. 1999-09-08 18:46:22 +00:00
Poul-Henning Kamp
6523748af1 Make sa/bdev, gd/bdev and gd/cdev as past-tense. 1999-09-08 17:02:40 +00:00
Peter Wemm
b720111ca3 Restore old sio driver for Bruce. We'll fix the bus problems in nsio
instead.
1999-09-08 11:08:50 +00:00
Peter Wemm
e5174d14c5 Repo copy isa/sio* to dev/sio/sio* in preperation for extra bus methods
including pci.
Also, eliminate NSIOTOT and do it dynamically where it matters.
1999-09-06 14:06:23 +00:00
Bill Paul
e5a9fd5435 This commit adds driver support for PCI fast ethernet NICs based on
the Davicom DM9100 and DM9102 chipsets, including the Jaton Corporation
XPressNet. Datasheet is available from www.davicom8.com.

The DM910x chips are still more tulip clones. The API is reproduced
pretty faithfully, unfortunately the performance is pretty bad. The
transmitter seems to have a lot of problems DMAing multi-fragment
packets. The only way to make it work reliably is to coalesce transmitted
packets into a single contiguous buffer. The Linux driver (written by
Davicom) actually does something similar to this. I can't recomment this
NIC as anything more than a "connectivity solution."

This driver uses newbus and miibus and is supported on both i386
and alpha platforms.
1999-09-06 06:14:30 +00:00
Bill Paul
9555e59a1e This commit adds driver support for the Silicon Integrated Systems
SiS 900 and SiS 7016 PCI fast ethernet chipsets. Full manuals for the
SiS chips can be found at www.sis.com.tw.

This is a fairly simple chipset. The receiver uses a 128-bit multicast
hash table and single perfect entry for the station address. Transmit and
receive DMA and FIFO thresholds are easily tuneable. Documentation is
pretty decent and performance is not bad, even on my crufty 486. This
driver uses newbus and miibus and is supported on both the i386 and
alpha architectures.
1999-09-05 21:01:03 +00:00
Peter Wemm
ae04ca6157 Don't install stubs, make a compat symlink at buildworld time.
All internal references to <machine/soundcard.h> are (hopefully :-) gone.
1999-09-04 15:46:31 +00:00
Doug Rabson
3e05dd9c7c Make <machine/soundcard.h> a stub which includes <sys/soundcard.h> 1999-09-04 14:35:18 +00:00
Marcel Moolenaar
ff78e85043 Implementation of the modify_ldt syscall. Use the sysarch() interface to do
the actual work. When USER_LDT is not defined for a kernel, sysarch returns
EOPNOTSUPP. Display a message in that case and return ENOSYS to userland.

Reviewed by: luoqi
1999-09-02 21:50:42 +00:00
Doug Rabson
4249382df0 This represents essentially a complete rewrite of the ISA PnP code. The
new system is integrated with the ISA bus code more cleanly and allows
the future addition of more enumerators such as PnPBIOS and ACPI.

This commit also enables the new pcm driver since it is somewhat tied to
the new PnP code.
1999-09-01 20:53:43 +00:00
Doug Rabson
8f0ba3dbab Make multiuser boots the default instead of singlue user. 1999-08-31 22:42:15 +00:00
Poul-Henning Kamp
f054c29093 Merge alpha and pc98 changes into i386 MBR handling code and replace all
three copies with one copy in MI land.
1999-08-29 09:12:54 +00:00
Poul-Henning Kamp
0bd2b984ce Sort the easy part of this file. It should be all sorted. 1999-08-29 08:44:18 +00:00
Poul-Henning Kamp
10af1a2b5f We don't need to pass the diskname argument all over the diskslice/label
code, we can find the name from any convenient dev_t
1999-08-28 14:33:44 +00:00
Marcel Moolenaar
86f95e6b6d Implement the OSS_GETVERSION ioctl. The version returned can be changed through
the sysctl variable `compat.linux.oss_version'.

PR: 12917
Originator: Dean Lombardo <dlombardo@excite.com>
1999-08-28 08:43:03 +00:00
Peter Wemm
ee15718941 $Id$ -> $FreeBSD$ (some mangled and/or hidden ones) 1999-08-28 02:21:15 +00:00
Peter Wemm
c3aac50f28 $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
Andrew Gallatin
34067f9475 Fix the child's return path from fork so that fork will return 0
in the child.  This corrects a problem where linux/alpha binaries see
the child's return value of fork as the parent's pid.  This happens because
linux/alpha binaries apparently check the return value directly, rather
than looking for a non-zero value in a4, as *BSD & OSF/1 do.

Reviewed by:dfr@nlsystems.com
1999-08-27 14:47:23 +00:00
Julian Elischer
ada9bd8cb8 Add PHK's make_dev() into more places where DEVFS used to be
hooked in directly.

Alpha change checked by: Matthew Jacob <mjacob@feral.com>
i4b ISDN changes checked by: Udo Schweigert <ust@cert.siemens.de>
    and Hellmuth Michaelis <hm@hcs.de>
PC98 changes checked by: Takahashi Yoshihiro <nyan@FreeBSD.org>
1999-08-27 07:26:26 +00:00
Matt Jacob
2d712f3d8d what is a devuce? 1999-08-25 18:05:52 +00:00
Marcel Moolenaar
296f7267f3 Fix lingo: 'is not implemented or obsoleted' is not the same as 'is obsoleted
or not implemented'.
1999-08-25 13:17:05 +00:00
Marcel Moolenaar
2fdc82e093 Change all UNIMPL syscalls to STD and add them to linux_dummy. Now we always
know if and when an unimplemented or obsoleted syscall is being used. Make the
message more end-user friendly.

And as long as we're here, rename some unimplemeted syscalls (linux_phys ->
linux_umount2, linux_vm86 -> linux_vm86old, linux_new_vm86 -> linux_vm86).

Change prototype for linux_newuname from `struct linux_newuname_t *' into
`struct linux_new_utsname *'. This change is reflected in linux.h and
linux_misc.c.
1999-08-25 11:19:03 +00:00
Marcel Moolenaar
fc4529a0d1 Change all UNIMPL syscalls to STD and add them to linux_dummy. Now we always
know if and when an unimplemented or obsoleted syscall is being used. Make the
message more end-user friendly.

And as long as we're here, rename some unimplemeted syscalls (linux_phys ->
linux_umount2, linux_vm86 -> linux_vm86old, linux_new_vm86 -> linux_vm86).

Change prototype for linux_newuname from `struct linux_newuname_t *' into
`struct linux_new_utsname *'. This change is reflected in linux.h and
linux_misc.c.

Lastly, make line-continuation and indentation more uniform.
1999-08-25 11:17:36 +00:00
Doug Rabson
6afde6e247 Some very minor changes to the ISA dma code. 1999-08-25 08:25:58 +00:00
Andrew Gallatin
63b584e7b8 Fix a small typo (missing comma) to make the alpha kernel build again 1999-08-22 21:47:32 +00:00
Mike Smith
b85ad36084 Catch an at_shutdown I didn't think of in the last batch.
Note to self: port to AS2100 so as to have a test system.

Submitted by:	jkh
1999-08-22 18:50:43 +00:00
Bill Paul
23e4757cd7 This commit adds device driver support for the Sundance Technologies ST201
PCI fast ethernet controller. Currently, the only card I know that uses
this chip is the D-Link DFE-550TX. (Don't ask me where to buy these: the
only cards I have are samples sent to me by D-Link.)

This driver is the first to make use of the miibus code once I'm sure
it all works together nicely, I'll start converting the other drivers.

The Sundance chip is a clone of the 3Com 3c90x Etherlink XL design
only with its own register layout. Support is provided for ifmedia,
hardware multicast filtering, bridging and promiscuous mode.
1999-08-21 18:34:58 +00:00
Andrew Gallatin
da83f611c3 Fix a nasty kld bug where modules with objects of type GLOB_DAT which had
non-zero addends were being loaded incorrectly
1999-08-20 14:21:35 +00:00
Peter Wemm
ebf9e95f31 Update for MI switch code, and trim a heap of unused (I believe) entries. 1999-08-19 00:20:10 +00:00
Peter Wemm
8dd36a4d6a Use MI switch code for process selection. This gets run queues entirely
out of the asm code, and as a bonus implements rtprio and idprio for the
Alpha. Previously if you ran an idprio process, you were assured of a
deadlock.
1999-08-19 00:16:52 +00:00
Kazutaka YOKOTA
64eed277c5 Add definitions for Interlink VersaPad. 1999-08-17 12:12:44 +00:00
Marcel Moolenaar
405f64d439 Implement vfork() syscall. 1999-08-16 11:47:21 +00:00
Marcel Moolenaar
878c351a1c Major rewrite.
The first reason for this rewrite is KNF conformance.

The second reason is to avoid redundancy. Each function printed the same
string, with only the syscall name being different. The actual printing is now
performed by a single function, which gets the syscall name as an argument.

The third reason is that of convenience. It's now very easy to add a new
dummy implementation. Just add ``DUMMY(foo);'' to the file. It's also a lot
easier now to see if a syscall has a dummy implementation or not.

The dummies are ordered on syscall number. Please maintain this when adding
new dummies (there're 32 candidates at the time of writing :-)

Reviewed by: bde
1999-08-15 18:59:44 +00:00
Marcel Moolenaar
a171f5adb6 Provide wrappers for sched_{s|g}etscheduler. We need to convert the policy
argument.

PR: 12006
Originator: Jean-Claude MICHOT <jcmichot@teaser.fr>
1999-08-15 17:28:40 +00:00
Marcel Moolenaar
e4accff654 Provide wrappers for sched_{s|g}etscheduler. We need to convert the policy
argument.

PR: 12006
1999-08-15 17:25:56 +00:00
Poul-Henning Kamp
c6ba8fec16 Give if_tun the "almost clone" makeover. 1999-08-15 09:54:57 +00:00
Marcel Moolenaar
e000c53684 Extend the number of syscalls to include those present in Linux 2.2.10. These
are syscalls 183 to 190. Also implement syscall 183: linux_getcwd. This is
needed to support a RH 6.0 environment.
1999-08-14 18:19:00 +00:00
Marcel Moolenaar
06ebbe77ed Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. Both
functions use the new sigset_t and sigaction_t which allows support for more
than 32 signals. Only the lower 32 signals are supported for now.

linux_rt_sigaction, linux_sigaction and linux_signal use linux_do_sigaction
to do the actual work. That way unnecessary redundancy is avoided. The same
has been done for linux_rt_sigprocmask and linux_sigprocmask. They call
linux_do_sigprocmask to do the actual work.
1999-08-14 17:28:46 +00:00
Marcel Moolenaar
68293b42c1 Implementation of linux_rt_sigaction and linux_rt_sigprocmask syscalls. These
syscalls are needed to support a RH 6.0 environment.
1999-08-14 17:14:13 +00:00
Poul-Henning Kamp
49ff4debd3 Spring cleaning around strategy and disklabels/slices:
Introduce BUF_STRATEGY(struct buf *, int flag) macro, and use it throughout.
please see comment in sys/conf.h about the flag argument.

Remove strategy argument from all the diskslice/label/bad144
implementations, it should be found from the dev_t.

Remove bogus and unused strategy1 routines.

Remove open/close arguments from dssize().  Pick them up from dev_t.

Remove unused and unfinished setgeom support from diskslice/label/bad144 code.
1999-08-14 11:40:51 +00:00
Dmitrij Tejblum
deebad912c Fix warnings. (Initializer of promcons did miss an element in the start.) 1999-08-13 16:02:32 +00:00
Marcel Moolenaar
7636612d50 Implementation of the CDROMSUBCHNL ioctl. 1999-08-13 14:44:13 +00:00
Marcel Moolenaar
00d3c51669 Use a wrapper for the link syscall that does name translations.
PR: 12749
Submitted by: Boris Nikolaus <boris@cs.tu-berlin.de>
1999-08-12 19:53:33 +00:00
Andrew Gallatin
563c65de90 Now that all chipsets support S/G DMA (which is required for ISA devices)
we can enable the floppy disk
1999-08-11 22:33:57 +00:00
Andrew Gallatin
7f146cdf3d Enable S/G IO. Based on Doug's changes to cia.c 1999-08-11 22:31:01 +00:00
Alan Cox
7308467da9 _pmap_allocpte:
If the pte page isn't PQ_NONE, panic rather than silently
	covering up the problem.
1999-08-11 19:19:04 +00:00
Marcel Moolenaar
175db64b3e Do not map {s|g}etrlimit onto FreeBSD syscalls. The arguments don't match.
The linux syscalls translate the arguments first before invoking the
FreeBSD native syscalls.

PR: kern/9591
Originator: John Plevyak <jplevyak@inktomi.com>
1999-08-11 13:34:31 +00:00
Marcel Moolenaar
10ef1b2aae Do not map {s|g}etrlimit onto the FreeBSD syscalls. The arguments do not
match.

PR: kern/9591
Originator: John Plevyak <jplevyak@inktomi.com>
1999-08-11 13:29:48 +00:00
Bill Paul
08339b4fa4 Convert the VIA Rhine driver to newbus and set it up to be compiled as
a module. Also modified the code to work on FreeBSD/alpha and added
device vr0 to the alpha GENERIC config.

While I was in the neighborhood, I noticed that I was still using
#define NFPX 1 in all of the Makefiles that I'd copied from the fxp
module. I don't really use #define Nfoo X so it didn't matter, but
I decided to customize this correctly anyway.
1999-08-10 17:15:20 +00:00
Andrew Gallatin
cf54c5ff42 - detect the number of pchips actually present; don't just assume 2
- support S/G DMA for ISA devices
1999-08-10 13:54:50 +00:00