1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-13 10:02:38 +00:00
Commit Graph

144953 Commits

Author SHA1 Message Date
Rafal Jaworowski
371bf7cc81 tsec(4): Always try to resume the receiver.
This helps recover from RX stall under heavy loads.

Submitted by:	Piotr Ziecik kosmo ! semihalf dot com
2009-02-17 15:59:27 +00:00
Rafal Jaworowski
0390701af8 tsec(4): do not clear interrupt events register before use.
Prior to this fix, IEVENT register was always cleared before calling
tsec_error_intr_locked(), which prevented error recovery actions from
happening with polling enabled (and could lead to serious problems, including
controller hang).

Submitted by:	Marcin Ligenza marcinl ! pacomp dot com dot pl
2009-02-17 15:47:13 +00:00
Rafal Jaworowski
ab160495d3 Handle mbuf exhaustion scenario in tsec(4).
Without this fix the system would hang under heavy networking load.

Submitted by:	Leon Theunissen leon ! parsec dot co dot za
2009-02-17 15:39:16 +00:00
Rafal Jaworowski
64f90c9dff tsec(4) style improvements and clean-up. 2009-02-17 14:59:47 +00:00
Rafal Jaworowski
bd37530ee4 Additional features for the tsec(4) Ethernet driver.
- interrupt coalescing
  - polling
  - jumbo frames
  - multicast
  - VLAN tagging

The enhanced version of the chip (eTSEC) can also take advantage of:

  - TCP/IP checksum calculation h/w offloading

Obtained from:	Freescale, Semihalf
2009-02-17 14:57:05 +00:00
Mike Makonnen
553bf6a453 Rename the rc.conf(5) knob if_up_delay to defaultroute_delay to better
reflect its purpose.
2009-02-17 11:55:50 +00:00
Maxim Konovalov
199cc11263 o Trim EOL whitespaces. 2009-02-17 10:50:18 +00:00
Maxim Konovalov
cbb9c89e93 o Teminate sentences by dot. 2009-02-17 10:49:36 +00:00
Marcel Moolenaar
832cdc2ca7 Remove gpt_offset and related code. It was introduced for use
by the BSD scheme, ended up not to be needed. Remove to avoid
abuse and to keep the bloat to a minimum.
2009-02-17 04:12:10 +00:00
Sean Bruno
ebe234793b Synopsis:
If speed of link between two devices is slower than the reported max
speed of both endpoints, the current driver will fail and be unable to
negotiate.

Summary:
Test negotiated speed by reading the CSRROM into a dummy variable.
If that read fails, decrement our speed and retry.  If all else fails,
go to lowest speed possible(0).

Report speed to the user.
Add display of the Bus Info Block when debug.firewire_debug > 1
Support the Bus Info Block(1394a-2000) method of speed detection.

I also should note that I am moving "hold_count" to 0 for future
releases.

This variable determines how many bus resets to "hold" a removed
firewire device before deletion.  I don't feel this is useful and will
probably drop support for this sysctl in the future.

Reviewed by:    scottl(mentor)
MFC after:      2 weeks
2009-02-17 04:08:08 +00:00
Warner Losh
993b1ae273 Hold off root mounting until we've gone through the loop of our thread
almost once.  After we've configured the devices that were present the
first time through, then we know that we're done.  If the device has
other devices that are deferred, then it must do a similar dance.
This catches both PC Cards and CardBus cards.
2009-02-17 02:14:04 +00:00
Alexander Motin
2e46610e21 Make core dumping to ad not to freeze even if interrupts, not disabled
for some reason, stealing our events.
2009-02-16 22:25:39 +00:00
Colin Percival
3a5733c67b Correctly scrub telnetd's environment.
Approved by:	so (cperciva)
Security:	FreeBSD-SA-09:05.telnetd
2009-02-16 21:56:17 +00:00
Marcel Moolenaar
78c0a9c9e2 Include Marvell EHCI HC driver for USB2. 2009-02-16 21:42:41 +00:00
Ed Schouten
55272bd6b4 The streams ptm code is pretty awful and likely incorrect. I don't know
anything about streams, so I'm not going to fix it. Just a small comment
to redirect folks to posix_openpt().
2009-02-16 20:12:28 +00:00
Alexander Motin
9f8919f236 Give atapci knowledge about set of implemented AHCI ports. It is possible
to not allocate them after the recent ata channels enumeration changes.
It allows to save some resources, not bother user with unexisting hardware
and not check unimplemented ports status on every interrupt.
2009-02-16 19:10:07 +00:00
Andrew Thompson
bb71e4b6bc Add an entry for xorg+hal+USB2 not detecting input devices. 2009-02-16 18:59:18 +00:00
Beat Gaetzi
c7869e8d4e - Add myself to the list of ports committers.
Approved by:	miwi (mentor)
2009-02-16 18:51:34 +00:00
Scott Long
6de67521aa GCC attacks! 2009-02-16 18:02:32 +00:00
Andrew Thompson
e9df28284b MFp4 //depot/projects/usb@157783
libusb20: Make return value compatible with libusb0.12.x in case of a USB
transfer timeout.

Submitted by:	Hans Petter Selasky
2009-02-16 15:32:12 +00:00
Dag-Erling Smørgrav
655fcdaa00 Fix a logic bug that caused the pfs_attr method to be called only for
PFS_PROCDEP nodes.

Submitted by:	Andrew Brampton <brampton@gmail.com>
MFC after:	2 weeks
2009-02-16 15:17:26 +00:00
Luigi Rizzo
d8d42f3f4e correct some #include 2009-02-16 15:10:51 +00:00
Luigi Rizzo
b27b816fc5 we need if_var.h not if.h 2009-02-16 15:10:03 +00:00
Luigi Rizzo
a1d4f19c0d remove unnecessary forward declaration 2009-02-16 15:09:37 +00:00
Luigi Rizzo
35b78b7520 remove dependency on eventhandler.h, we only need a forward declaration 2009-02-16 15:08:41 +00:00
Luigi Rizzo
281c8daea2 remove dependency on net/if.h of this header 2009-02-16 15:07:40 +00:00
Scott Long
daed819b02 Fix parallel SCSI negotiation in the CAM_NEW_TRAN_CODE world order.
Overzealous sanity checks were locking the sync_rate and offset values to
zero, thanks to a twisty maze of recursive code.
2009-02-16 14:57:15 +00:00
Scott Long
5dc642bd9f Instrument the probe state machine so that things like DV can be tracked. 2009-02-16 14:38:52 +00:00
Luigi Rizzo
2eef235973 use a const format string in the log message so we can check the
arguments (if/when we enable those checks)
2009-02-16 12:09:52 +00:00
Robert Watson
d7bf9f090d IFF_NEEDSGIANT will no longer be supported, so remove compatibility code
from if_sppp framework for interfaces requiring Giant.
2009-02-16 10:29:03 +00:00
Marcel Moolenaar
e24c8a3fb8 Add support to add, delete and modify logical partitions, as well
as to create and destroy the extended partitioning scheme. In
other words: full support.
2009-02-16 03:54:28 +00:00
Andrew Thompson
d842ade9a4 Add a helper function for loading geli keys from the loader. 2009-02-16 02:42:17 +00:00
Andrew Thompson
e31a070263 Add uslcom to the build too.
Reminded by:	Michael Butler
2009-02-15 23:40:29 +00:00
Andrew Thompson
4a93759f47 Make uslcom compile, cut'n'paste errors from uplcom. 2009-02-15 23:38:58 +00:00
Robert Watson
cdb31d3351 Remove debug.ce.mpsafenet: we no longer support running the network
stack with conditional Giant acquisition, and IFF_NEEDSGIANT will
be removed in the near future.
2009-02-15 23:29:13 +00:00
Robert Watson
6b34ab205e Remove debug.ctau.mpsafenet: we no longer support running the network
stack with conditional Giant acquisition, and IFF_NEEDSGIANT will
be removed in the near future.
2009-02-15 23:21:52 +00:00
Robert Watson
c197427cee Remove debug.cp.mpsafenet: we no longer support running the network
stack with conditional Giant acquisition, and IFF_NEEDSGIANT will
be removed in the near future.
2009-02-15 23:18:29 +00:00
Andrew Thompson
e4edc14efd Switch over GENERIC kernels to USB2 by default.
Tested by:	make universe
2009-02-15 22:33:44 +00:00
Marcel Moolenaar
7ca4fa83ec Add method precheck to the g_part interface. The precheck
method allows schemes to reject the ctl request, pre-check
the parameters and/or modify/set parameters. There are 2
use cases that triggered the addition:
1.  When implementing a R/O scheme, deletes will still
    happen to the in-memory representation. The scheme is
    not involved in that operation. The pre-check method
    can be used to fail the delete up-front. Without this
    the write to disk will typically fail, but at that
    time the delete already happened.
2.  The EBR scheme uses a linked list to record slices.
    There's no index. The EBR scheme defines the index
    as a function of the start LBA of the partition. The
    add verb picks an index for the range and then invokes
    the add method of the scheme to fill in the blanks. It
    is too late for the add method to change the index.
    The pre-check is used to set the index up-front. This
    also (silently) overrides/nullifies any (pointless)
    user-specified index value.
2009-02-15 22:18:16 +00:00
Alexander Motin
1c4dd558d1 Remove unneeded AND operation. We have already checked that bit is set. 2009-02-15 21:54:16 +00:00
Alexander Motin
8f740c4b03 Enable MSI support by default. Still can be disabled using device.hints. 2009-02-15 21:17:21 +00:00
Alexander Motin
a3b7c762ba Add initial single-vector MSI support into atapci driver.
Works fine with AHCI and theoretically other MSI capable devices.

At this moment support disabled by default. To enable it, set
"hint.atapci.X.msi=1" device hint.
2009-02-15 20:37:55 +00:00
Andrew Thompson
719085d9d1 Pull in kbd.c with usb2_input_kbd, just like ukbd. 2009-02-15 20:24:21 +00:00
Warner Losh
7008762a18 It appears that none of the contents of this file are necessary, so
replace the amd64-ish version with a blank version.
2009-02-15 20:05:13 +00:00
Ed Schouten
6a4dc56627 Add the pccard header files to ObsoleteFiles.inc.
Reviewed by:	imp
2009-02-15 18:30:44 +00:00
Warner Losh
d49107c795 Removal pccard directory requires removing it from the list of things
that get installed too.  <blush>

Submitted by:	Olivier Smedts (identical patches to what I came up
		with before checking email)
2009-02-15 18:19:24 +00:00
Warner Losh
c3661cd0e7 Make dumper_t definition conform more closely to stlye(9). This also
avoid keywords in other languages that may have been present before.

Submitted by:	Andriy Gapon, jkoshy@
2009-02-15 17:56:16 +00:00
Bruce M Simpson
57e9cb8cda Now that ifmcstat(8) does not suck, retire host-mode netstat -g.
This change will not be back-ported.
2009-02-15 16:16:38 +00:00
Alexander Motin
5690c13d14 Add workaround for some ATI chips, failing to soft-reset
when port multiplicator supported, but absent.
2009-02-15 16:05:48 +00:00
Bruce M Simpson
3f3d246f2c nits 2009-02-15 15:26:42 +00:00