- Added 4 speaker enable to initialization sequence.
- Removed delays between register pokes which appear to aggravate a
problem this card has sampling at 44.1kHz. With any form of delay,
skew relative to system clock at 44.1kHz is usually in range 0-25%
(now 0-3%). No other rates exhibit this problem.
- Changed structs cmi_* to sc_*.
Approved by: Cameron Grant <gandalf@vilnya.demon.co.uk>
this introduces a new buffering mechanism which results in dramatic
simplification of the channel manager.
as several structures have changed, we take the opportunity to move their
definitions into the source files where they are used, make them private and
de-typedef them.
the sound drivers are updated to use snd_setup_intr instead of
bus_setup_intr, and to comply with the de-typedefed structures.
the ac97, mixer and channel layers have been updated with finegrained
locking, as have some drivers- not all though. the rest will follow soon.
this apparently fixes problems initialising certain es1371/es1373/ct5880
revisions.
Confirmed working by: Richard J Kuhns <rjk@grauel.com>
PR: i386/25944
both should work in non-pnp mode, the 924 should also work in its rather
braindead pnp mode- it will adopt port 0x530 unless given hints due to it
starting up in soundblaster mode and thus not requesting a valid mss port
address.
Submitted by: George Reid <greid@ukug.uk.freebsd.org>
devices. opening /dev/{dsp,dspW,audio}0 and then opening a different device
from that list and closing it resulted in a panic when any operation is
performed on the first fd.
we prevent this happening by denying the second open unless it uses the same
minor device as the first.
PR: kern/25519
If you ever want to run midi(4) out of the giant lock, uncomment
MIDI_OUTOFGIANT in midi.h. Confirmed to work for csamidi with WITNESS
and INVARIANTS.
- midi_info, midi_open and seq_info are now tailqs, allowing arbitrary
numbers of devices to be configured.
- Do not send an active sensing message to reset midi modules.
- Clone /dev/sequencer*. /dev/sequencer0 and /dev/sequencer are generated
upon initialization.
all of the hwvol members of struct snd_mixer live in a hwvol_* namespace.
- When changing the mixer device via the hwvol_mixer sysctl, reset the
muted state so that a mute operation on a new device won't try to
unmute the new device with the old device's saved volume.
- When the volume is muted, if a down or up volume request is received,
first restore the saved volume level and then adjust it.
Reviewed by: cg
specific snd_mixer device rather than global across all mixers.
- Add per-mixer mute status and saved mute_level so that the mixer_hwmute()
function can now toggle the mute state when the mute button is pressed.
- Create a dynamic sysctl tree hw.snd.pcmX when a pcm device is registered.
- Move the hw.snd.hwvol_* sysctl's to hw.snd.pcmX.hwvol_* so that they
are now properly device-specific. Eventually when the mixers become
their own devices these sysctl's will move to live under a mixerX tree.
- Change the interface of the hwvol_mixer sysctl so that it reports the
name of the current mixer device instead of the number and is settable
with the name instead of the number.
- Add a new function mixer_hwinit() used to setup the dynamic sysctl's
needed for the hwvol support that can be called by drivers that support
hwvol.
Reviewed by: cg
'chancount' never got up to equaling 'maxchans'. As a result,
pcm_makelinks() was never called, and one always had to set the sysctl to
get the /dev/mixer and other symlinks generated in the DEVFS case. Instead,
change the test in pcm_addchan() to call pcm_makelinks() after the first
channel is initialized, since the aliases are linked to channel 0.
Reviewed by: cg
status register rather than 0. Without this, a single hardware volume
event triggers an interrupt storm.
- Implement hardware volume control for the Maestro chips. This version
only handles the case where both channels are adjusted at the same time.
Reviewed by: cg
- The mixer_hwmute() function can be called when a soundcard receives a
mute request.
- The mixer_hwstep() function can be used to adjust the volume of one or
both channels.
- The 'hw.snd.hwvol_step' sysctl determines the amount that mixer_hwstep()
adjusts the volume by on each call.
- The 'hw.snd.hwvol_mixer' sysctl specifies the mixer device to adjust the
volume on for both functions. The values used correspond to the
SOUNDCARD_MIXER_* constants.
modify chn_setblocksize() to pick a default soft-blocksize appropriate to the
sample rate and format in use. it will aim for a power of two size small
enough to generate block sizes of at most 20ms. it will also set the
hard-blocksize taking into account rate/format conversions in use.
update drivers to implement setblocksize correctly:
updated, tested: sb16, emu10k1, maestro, solo
updated, untested: ad1816, ess, mss, sb8, csa
not updated: ds1, es137x, fm801, neomagic, t4dwave, via82c686
i lack hardware to test: ad1816, csa, fm801, neomagic
others will be updated/tested in the next few days.
this gives us several benefits, including:
* easier extensibility- new optional methods can be added to
ac97/mixer/channel classes without having to fixup every driver.
* forward compatibility for drivers, provided no new mandatory methods are
added.
because it only takes a struct tag which makes it impossible to
use unions, typedefs etc.
Define __offsetof() in <machine/ansi.h>
Define offsetof() in terms of __offsetof() in <stddef.h> and <sys/types.h>
Remove myriad of local offsetof() definitions.
Remove includes of <stddef.h> in kernel code.
NB: Kernelcode should *never* include from /usr/include !
Make <sys/queue.h> include <machine/ansi.h> to avoid polluting the API.
Deprecate <struct.h> with a warning. The warning turns into an error on
01-12-2000 and the file gets removed entirely on 01-01-2001.
Paritials reviews by: various.
Significant brucifications by: bde
