<QUOTE>
Overflow of cg_niblk causes spurious "SUMMARY INFORMATION BAD" warnings
prompts in fsck_ffs. cg_niblk has type int16_t, but it is (ab)used
to hold the number of inodes per group (it has nothing to do with the
number of inode blocks in the cg as claimed in ffs/fs.h), and there
can be lots of inodes per group. E.g.,
newfs -i 8192 -b 16384 -f 16384 -c 255 ...
gives 0xA900 inodes/group. Assignment of this to cg_niblk gives
-0x5700. This is mostly harmless (ufs/ffs doesn't use cg_niblk, and
bug-for-bug compatible overflow occurs in newfs), but in
fsck_ffs/pass5.c, negative values of cg_niblk limit cg_irotor to 0
and the summary info appears to be bad.
</QUOTE>
Submitted by: Bruce Evans <bde@zeta.org.au>
Obtained from: Kirk McKusick <mckusick@mckusick.com>
in-core pointers to summary information. An array in this region
(fs_csp) could overflow on filesystems with a very large number of
cylinder groups (~16000 on i386 with 8k blocks). When this happens,
other fields in the superblock get corrupted, and fsck refuses to
check the filesystem.
Solve this problem by replacing the fs_csp array in 'struct fs'
with a single pointer, and add padding to keep the length of the
128-byte region fixed. Update the kernel and userland utilities
to use just this single pointer.
With this change, the kernel no longer makes use of the superblock
fields 'fs_csshift' and 'fs_csmask'. Add a comment to newfs/mkfs.c
to indicate that these fields must be calculated for compatibility
with older kernels.
Reviewed by: mckusick
mount_ifs: repocopy of sbin/mount, with most of the intelligence ripped out
and "ufs" replaced with "ifs" in the right places. It will only
mount a single filesystem, rather than the -t <type> magic that
our real mount does.
fsck_ifs: repocopy of sbin/fsck_ffs, but the directory structure stuff
(pass2 and some refcount checks) has been #ifdef'ed out.
src/sbin/Makefile: Build these two utilities
There is probably cruft code left in both which can be removed at a later
date, especially in mount_ifs, but I trust that people will not try
mount_ifs -a ..
Note: there are no man pages installed for these two commands as I haven't
actually written them yet.
utilities which use bits of fsck_ffs - namely quotacheck and fsdb.
In depth, utilities.c contains blockcheck() which is needed by both,
but also a slew of routines which require bits of the FFS code to be
compiled in. This breaks the fs-specific and non-fs-specific code
up into two files (well, blockcheck() is the only routine in utilities.c,
that'll change later) which makes building fsck_ffs, quotacheck and
fsdb work yet again.
(You won't find commits to fsdb and quotacheck here before I haven't
committed the post-fsck-wrappers version of them yet.)
Approved by: rwatson
Obtained from: NetBSD-current source tree
The beginnings of the fsck wrappers stuff from NetBSD. This particular commit
brings a newly repo-copied sbin/fsck_ffs/ (from sbin/fsck/) into fsck wrappers
mode.
A quick overview (the code reflects this):
* Documentation changed to reflect fsck_ffs instead of fsck
* Simply acts on a single filesystem, doesn't try to do any multiple filesystem
magic - this is done by the fsck wrappers now
And then specific to fsck_ffs:
* link to /sbin/fsck_4.2bsd and /sbin/fsck_ufs. This is because right now
the filesystem is of type ufs not ffs, and that during autodetection the
labeltype rather than the VFS type is used - this is because when doing
an autodetection of filesystem type in the fsck wrapper program, it does
not have any link between label type (4.2bsd, vinum, etc) and VFS string.
Note that this shouldn't break a build since the required buildworld Makefile
magic and import of the fsck wrapper code into src/sbin/fsck/ will happen
in a seperate commit.
which sets the inoinfo's i_parent and i_dotdot to 0, but they never get
set to ROOTINO. This means that propagate will never find lost+found and
its descendents, subdirectories will remain DSTATE (instead of DFOUND)
even though they *are* correctly linked in, and pass4.c will try to
clear them unsuccessfully, thinking that there is no link count from the
DSTATE directory's parent. The result is that you need to run fsck twice
and get link count increasing errors (which are unexpected and fatal
when running in preen mode). The fix is to set i_parent and i_dotdot to
"parent" after the second cacheino() call in dir.c:allocdir().
Obtained from: "Ethan Solomita" <ethan@geocast.com> (of the NetBSD Project)
all have zero length. A non-zero length panic's the kernel when one
of these is deleted.
PR: 19426
Submitted by: Ian Dowse <iedowse@maths.tcd.ie>
Reviewed by: dwmalone@FreeBSD.org
effect on operation of fsck on filesystems without snapshots.
If you get compilation errors, be sure that you have copies of
/usr/include/sys/mount.h (1.94), /usr/include/sys/stat.h (1.21),
and /usr/include/ufs/ffs/fs.h (1.16) as of July 4, 2000 or later.
DIR I=64512 CONNECTED. PARENT WAS I=4032
fsck: cannot find inode 995904
fsdb found the inodes with no problem:
fsdb (inum: 64512)> inode 995904
current inode: directory
I=995904 MODE=40777 SIZE=512
MTIME=Feb 14 15:27:07 2000 [0 nsec]
CTIME=Feb 14 15:27:07 2000 [0 nsec]
ATIME=Feb 24 10:31:58 2000 [0 nsec]
OWNER=nobody GRP=nobody LINKCNT=4 FLAGS=0 BLKCNT=2 GEN=38a41386
Direct blocks: 8094568 0 0 0 0 0 0 0 0 0 0 0
Indirect blocks: 0 0 0
The problem turns out to be a program logic error in fsck. It stores
directory inodes internally in hash lists, using the number of
directories to form the hash key:
inpp = &inphead[inumber % numdirs];
Elsewhere, however, it increments numdirs when it finds unattached
directories. I've made the following fix, which solved the problem in
the case in hand.
Submitted by: Greg Lehey <grog@lemis.com>
Reviewed by: Matthew Dillon <dillon@apollo.backplane.com>
Approved by: Kirk McKusick <mckusick@mckusick.com>
Also, in addition to the previous log message, the last change had a fix
for the case where where f.mntfromname is a relative path like da0a.
Submitted by: bde
- Don't use realpath as stat does the right thing.
- Only check ufs filesystems in getmntpt.
- Dont' bother checking that the ufs-mounted-on
device is a special file. It *must* be a special
file, or ufs wouldn't have mounted it.
Submitted by: Paul Saab <ps@yahoo-inc.com>
Submitted by: Kirk McKusick <mckusick@McKusick.COM>
Obtained from: Mckusick, BSDI and a host of others
This exactly matches Kirks sources imported under the
Tag MCKUSICK2. These are as supplied by kirk with one small
change needed to compile under freeBSD.
Some FreeBSD patches will be added back, though many have been
added to Kirk's sources already.
which caused the reference count of a directory to get doubly
decremented.
PR: bin/8030
Reviewed by: nate
Submitted by: Don Lewis <Don.Lewis@tsc.tdk.com>
bug was the cause of the 'freeing free frag' panics that people have been
seeing with FreeBSD/alpha. I have a similar patch to newfs but I've not
finished testing it.
support, which need a final "\n". I only observed one line of
mangled output, but I think there is another one which suffers
from the same problem, and thus I provide a patch that covers
both.
PR: 7483
Reviewed by: phk
Submitted by: Stefan Esser <se@FreeBSD.org>
that `fsck -p' doesn't check multiple slices on the same drive
concurrently. Don't invoke undefined behaviour when searching for
the drive number in strange device names.
PR: 6129
Reviewed by: phk
Submitted by: Yuichi MATSUTAKA <matutaka@osa.att.ne.jp>, but rewritten
by me.
superblock is invalid, fsck looks at the label to help guess where
the next superblock should be. If the partition type is 4.2BSD,
fsck assumed that the block size was valid and divided by it, so
it dumped core if the size was 0.
Initialization of the label was broken almost 3 years ago in rev.1.9
of newfs/newfs.c. Newfs does not change the label at all, so there
is no problem (except the breakage of the automatic search for
backup superblocks) unless something else sets the partition type
to 4.2BSD. However, it is too easy to set partition types to
4.2.BSD by copying an old label or by using a disktab entry to
create the label.
PR: 2537
floating point better in the percentage calculation there to avoid
overflow when there are more than about 20 million fragments. Start
using floating point in the other percentage calculation to avoid
overflow when there are more than about 2 million fragments.
Fixed printf format strings.
Converted sccsid to rcsid.
when there isn't even a filesystem. Attempting to print them tended
to cause SIGSEGV or SIGFPE depending on how far setup() got before it
returned 0. This was broken in the previous revision by removing a
return statement that the previous case depended on falling into.
PR: 4840 (fixed by this commit)
PR: 2537 (possibly fixed by Lite2 merge and later changes. setup()
does more checking now)
