in a device independent manner. Also include an example anticipatory
scheduler, gsched_rr, which gives very nice performance improvements
in presence of competing random access patterns.
This is joint work with Fabio Checconi, developed last year
and presented at BSDCan 2009. You can find details in the
README file or at
http://info.iet.unipi.it/~luigi/geom_sched/
to remove it to avoid panics in case of two threads trying to remove it in
parallel.
PR: kern/116837
Submitted by: Takahiro Kurosawa (takahiro.kurosawa gmail.com) (orig version)
MFC after: 10 days
Previously, one of these limits was initialized in two places to a
different value in each place. Moreover, because an unsigned int was used
to represent the amount of pageable physical memory, some of these limits
were incorrectly initialized on 64-bit architectures. (Currently, this
error is masked by login.conf's default settings.)
Make vm_thread_swapin() and vm_thread_swapout() static.
Submitted by: bde (an earlier version)
Reviewed by: kib
prevented the link-layer entry from being freed.
In both in.c and in6.c (though that code path seems to be basically dead)
plug a reference leak in case of a pending callout being drained.
In if_ether.c consistently add a reference before resetting the callout
and in case we canceled a pending one remove the reference for that.
In the final case in arptimer, before freeing the expired entry, remove
the reference again and explicitly call callout_stop() to clear the active
flag.
In nd6.c:nd6_free() we are only ever called from the callout function and
thus need to remove the reference there as well before calling into
llentry_free().
In if_llatbl.c when freeing entire tables make sure that in case we cancel
a pending callout to remove the reference as well.
Reviewed by: qingli (earlier version)
MFC after: 10 days
Problem observed, patch tested by: simon on ipv6gw.f.o,
Christian Kratzer (ck cksoft.de),
Evgenii Davidov (dado korolev-net.ru)
PR: kern/144564
Configurations still affected: with options FLOWTABLE
dom_ifdetach() calls as they might sleep for callout_drain().
Do as we do in if_attachdomain1() [r121470] and handle
if_afdata_initialized earlier and call dom_ifdetach() unlocked.
Discussed with: rwatson
MFC after: 10 days
has actually succeeded to initialize and attach. There is a theoretical
possibility to drop out early in if_attachdomain1() leaving the array
uninitialized if we cannot get the lock.
Discussed with: rwatson
MFC after: 10 days
This adds the explicit include (so far probably included through one of the
few "hidden" includes in other header files) for vnet.h and adds a cast
to unbreak LINT-VIMAGE.
* WPA-None requires ap_scan=2:
The major difference between ap_scan=1 (default) and 2 is, that no
IEEE80211_IOC_SCAN* ioctls/functions are called, though, there is a
dependency on those. For example the call to wpa_driver_bsd_scan()
sets the interface UP, this never happens, therefore the interface
must be marked up in wpa_driver_bsd_associate(). IEEE80211_IOC_SSID
also is not called, which means that the SSID has not been set prior
to the IEEE80211_MLME_ASSOC call.
* WPA-None has no support for sequence number updates, it doesn't make
sense to check for replay violations..
* I had some crashes right after the switch to RUN state, issue is
that sc->sc_lastrs was not yet defined.
Approved by: rpaulo (mentor)
MFC after: 3 weeks
being embedded is in fact link-local, before attempting to embed it.
Note that this operation is a side-effect of trying to avoid recursion on
the IN6 scope lock.
PR: 144560
Submitted by: Petr Lampa
MFC after: 3 days
IPv4 addresses can and do change during normal operation. Testing by
pfSense developers exposed an issue where OpenOSPFD was using the IPv4
address to leave the OSPF link-scope multicast groups on a dynamic
OpenVPN tun interface, rather than using RFC 3678 with the interface
index, which won't be raced when the interface's addresses change.
In inp_join_group():
If we are already a member of an ASM group, and IP_ADD_MEMBERSHIP or
MCAST_JOIN_GROUP ioctls are re-issued, return EADDRINUSE as per the
legacy 4.4BSD multicast API. This bends RFC 3678 slightly, but does
not violate POLA for apps using the old API.
It also stops us falling through to kicking IGMP state transactions
in what is otherwise a no-op case.
[This has already been dealt with in HEAD, but make it explicit before
we MFC the change to 8.]
In inp_leave_group():
Fix a bogus conditional.
Move the ifp null check to ioctls MCAST_LEAVE* in the switch..case
where it actually belongs.
If an interface was specified, by primary IPv4 address, for ioctl
IP_DROP_MEMBERSHIP or MCAST_LEAVE_GROUP (an ASM full leave operation),
then and only then should we look up the ifp from the IPv4 address in
mreqs.imr_interface.
If not, we fall through to imo_match_group() as before, but only in
the IP_DROP_MEMBERSHIP case.
With these changes, the legacy 4.4BSD multicast API idempotence should
be mostly preserved in the SSM enabled IPv4 stack.
Found by: ermal (with pfSense)
MFC after: 3 days
StarCat systems which provides time-of-day services for both as well as
console service for Serengeti, i.e. Sun Fire V1280. While the latter is
described with a device type of serial in the OFW device tree, it isn't
actually an UART. Nevertheless the console service is handled by uart(4)
as this allowed to re-use quite a bit of MD and MI code. Actually, this
idea is stolen from Linux which interfaces the sun4v hypervisor console
with the Linux counterpart of uart(4).
bus we actually mapped at rather than always based on the last bus we
encountered while moving upward in the tree. Otherwise we might use the
wrong bus space in case the bridge directly underneath the nexus doesn't
require mapping, i.e. was skipped as it's the case for ssm(4) nodes.
set, it make sense to actually initialize that array. This fixes some
issues with 4965 adapters where the TX power is crucial.
This got lost somewhere while merging with the OpenBSD code.
Approved by: rpaulo (mentor)
Obtained from: OpenBSD
MFC after: 2 weeks
* Enable DC calibration and crystal calibration on Centrino Advanced-N
6250 parts.
* Workaround for a HW bug (does not affect 4965AGN) that may sporadically
affect latency under some rare circumstances. From a similar commit to
iwlwifi.
* Update sensitivity settings for 5000 series to workaround a performance
bug in the DSP (1000 is not affected so we keep the old values for 5000).
* Update sensitivity settings for 6000 series.
* Set differential gains on 6250 too (but use a 1.0 factor, not 1.5).
* Init OFDM sensitivity with min value (which depends on the chip)
instead of hardcoding it to 90.
* Read calibration version from ROM and set IWN_GP_DRIVER_CALIB_VER6
bit on 6x50 if version >= 6.
Approved by: rpaulo (mentor)
Obtained from: OpenBSD
MFC after: 2 weeks
- code flow in handler could let interrupt be
reenabled when not wanted.
- change where the RX lock is taken to improve
performance.
- adapter->msix is true for MSI systems also,
it needs to explicitly test for 82574, good one :)
compiled with "options VIMAGE".
As it is now, there is still a single instance of the pipes,
and it is only usable from vnet0 (the main instance).
Trying to use a pipe from a different vimage does not crash
the system as it did before, but the traffic coming out from
the pipe goes to the wrong place, and i still need to
figure out where.
Support for per-vimage pipes is almost there (just a matter of
uncommenting the VNET_* definitions for dn_cfg, plus putting into
the structure the remaining static variables), however i need
first to figure out how init/uninit work, and also to understand
where packets are ending up on exit from a pipe.
In summary: vimage support for dummynet is not complete yet,
but we are getting there.
broken atrtc.
Now if you want more correct stats on profhz and stathz it may be
disabled by setting to 0.
Reported by: A. Akephalos <akephalos dot akephalos at gmail dot com>,
Jakub Lach <jakub_lach at mailplus dot pl>
MFC: 1 week
