is used instead of /usr/lib
io.c: add #include <machine/cpufunc.h> as instructed by David Greenman to
avoid inb/outb linking errors.
NOTE: I just discovered that if GNUC is not used the inline functions will not be expanded from the include file and real inb/outb functions would
be needed.
1) Fixed up some header locations
2) Replaced list of boot files with /kernel
3) Changed disklabel use in Makefile to conform to 4.4
4) Added size command in Makefile to get close estimate of bootblock
sizes. Total size of text and data must be below 64K, slightly
overestimated since a.out header subsequently gets stripped.
5) Various buffer sizes are set to 8192 bytes in sys.c. In 4.4 MAXBSIZE
is set to 64K which is too big for the bootblocks to deal with.
Submitted by: Paul Richards
from David Greenman, Bruce Evans and Julian Elischer.
They are:
[vnode pager - David/Bruce]:
The following patch fixes a problem where some data could be lost in a
delayed-write buffer if the cached buffer was larger than a page. This fix was
provided by Bruce Evans and modified slightly by me.
[st.c - Julian]:
My fix for "bad request, must be between 0 and 0"
RTFS if you're interested).
[gnu/fpemul - David/Bruce]:
These changes fix single stepping of emulated FPU instructions.
Previously, the instruction after an emulated instruction was
executed without causing a SIGTRAP ...
The also fix the initial control word being different for the
GPL emulator (it is still wrong for the old emulator) and remove
an unnecessary panic when emulation is not configured (I hope at
least init, sh and reboot will run without floating point. I
remember only df and mkfs being broken by the lack of FP in 0.0).
[Various fixes described below - Bruce/David]:
sys/i386/boot/boot2.S:
Yet another attempt to propagate the correct fix for 16 vs
32-bit mode bugs. [verified]
sys/i386/i386/db_interface.c:
Protect against reentering Debugger().
sys/kern/kern_time.c:
Don't allow 'time.tv_usec == 0' except at clock interrupts.
sys/pcfs/pcfs_fat.c:
Make it compile without -O.
sys/scsi/sd.c:
Fix as posted to some freebsd mailing list.
(changes the order of the assignment of "sectors" because it earlier
value is needed first -DG)
sys/vm/vm_glue.c:
Fix stale comments and verbose code.
sys/vm/vm_mmap.c
Fix off by 1 errors and verbose code.
[From Nate - cosmetic but non-intrusive and useful enough to go in]
sys/i386/isa/isa.c:
Appended you'll find a patch to the NMI error log routine in isa/isa.c.
The below patch just adds some additional information when an NMI occurs
which can help debug the hardware problem.
initializing it to 0 in the floppy boot case. This allows my Toshiba
1910 laptop to finally boot, and may help out other machines cursed
with early Phoenix BIOS's as well.
* If there is no 386BSD partition, initialize the label sector with
* LABELSECTOR instead of with garbage.
* Fixed reading of bad sector table. It is at the end of the 'c'
* partition, which is not always at the end of the disk.
>From: bde@kralizec.zeta.org.au (Bruce Evans)
Subject: cache botch in bootstrap
Date: Sun, 20 Feb 94 18:14:35 +1100
The cache in the bootstrap loader didn't allow for the device changing.
This caused surprisingly little trouble - the cache is only for a single
track (or part of a track), and the first access to a new device is
always for an early sector, so there is no problem unless the last access
to the old device was for an early sector. I saw the problem on a system
with BSD on wd1 and no label on wd0. Everything worked if the the device
name wd(1,a) was specified before the default of wd(0,a) was tried, but
when the default was tried, it failed on the first sector because there
was no label, and then the first sector on wd0 was always used instead
of the first sector on wd1, so there was apparently no label on wd1
either.
Bruce
Change movl %es: -2(reg) to use a subl $2,reg when fixing up the IDT
entries for bdb. This seems to be the best way to go.
Some day soon #ifdef BDB all of Bruces debugger code.
now reads:
printf("use hd(1,a)/386bsd to boot sd0 when wd0 is also installed\n");
I know the person wanted more explination, but there is little room in
the boot blocks for verbose text!
is so often reported as an error condition when it is not. We print the
size of things so for those who want to know if this happened they can
figure it out from the size information that is printed.
